-
|
Hi, firmware update operation finished successfully
cat: /dev/ttyUSB2: No such file or directory
Done!When running autoflash again the same thing happens. I also tried manual flashing with the following message: ubuntu@ubuntu:~$ sudo qmi-firmware-update --update -d "413c:81b6" SWI9X30C_02.30.01.01.cwe `SWI9X30C_02.30.01.01_GENERIC_002.045_000.nvu
loading device information before the update...
error: couldn't open QMI device: Failure
The modem shows up in lsusb as: " Can someone please help me with this? Tried on Ubuntu 20.04 and 21.10 as well as on Linux Mint 21. Attached is the complete Log from the autoflash as well as dmesg output for the modem. Output dmesg: [ 781.076651] usb 1-7: New USB device found, idVendor=413c, idProduct=81b6, bcdDevice= 0.06
[ 781.076654] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 781.076655] usb 1-7: Product: DW5811e Snapdragon™ X7 LTE
[ 781.076657] usb 1-7: Manufacturer: Sierra Wireless, Incorporated
[ 781.076658] usb 1-7: SerialNumber: LL123456789
[ 781.109545] qcserial 1-7:1.0: Qualcomm USB modem converter detected
[ 781.109809] usb 1-7: Qualcomm USB modem converter now attached to ttyUSB0
[ 781.115683] qcserial 1-7:1.2: Qualcomm USB modem converter detected
[ 781.115810] usb 1-7: Qualcomm USB modem converter now attached to ttyUSB1
[ 781.121538] qcserial 1-7:1.3: Qualcomm USB modem converter detected
[ 781.121654] usb 1-7: Qualcomm USB modem converter now attached to ttyUSB2
[ 781.171083] cdc_mbim 1-7:1.12: cdc-wdm1: USB WDM device
[ 781.171311] cdc_mbim 1-7:1.12 wwan0: register 'cdc_mbim' at usb-0000:03:00.0-7, CDC MBIM, c2:0f:cb:bf:b5:74Output Autoflash.sh: ubuntu@ubuntu:~$ wget https://raw.githubusercontent.com/danielewood/sierra-wireless-modems/master/autoflash-7455.sh && sudo bash autoflash-7455.sh
--2023-12-16 09:42:53-- https://raw.githubusercontent.com/danielewood/sierra-wireless-modems/master/autoflash-7455.sh
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 16616 (16K) [text/plain]
Saving to: ‘autoflash-7455.sh’
autoflash-7455.sh 100%[===================>] 16.23K --.-KB/s in 0.006s
2023-12-16 09:42:53 (2.77 MB/s) - ‘autoflash-7455.sh’ saved [16616/16616]
---
Searching for EM7455/MC7455 USB modems...
---
Found EM7455/MC7455:
Bus 001 Device 008: ID 413c:81b6 Dell Computer Corp. DW5811e Snapdragon™ X7 LTE
---
Stoping modem manager to prevent AT command spam and allow firmware-update, this may take a minute...
---
Installing all needed prerequisites...
Ign:1 cdrom://Ubuntu 20.04.6 LTS _Focal Fossa_ - Release amd64 (20230316) focal InRelease
Hit:2 cdrom://Ubuntu 20.04.6 LTS _Focal Fossa_ - Release amd64 (20230316) focal Release
Hit:4 http://archive.ubuntu.com/ubuntu focal InRelease
Hit:5 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Hit:6 http://security.ubuntu.com/ubuntu focal-security InRelease
Reading package lists... Done
Building dependency tree
Reading state information... Done
4 packages can be upgraded. Run 'apt list --upgradable' to see them.
Reading package lists... Done
Building dependency tree
Reading state information... Done
curl is already the newest version (7.68.0-1ubuntu2.21).
unzip is already the newest version (6.0-25ubuntu1.1).
unzip set to manually installed.
libqmi-glib5 is already the newest version (1.30.4-1~ubuntu20.04.1).
libqmi-proxy is already the newest version (1.30.4-1~ubuntu20.04.1).
libqmi-utils is already the newest version (1.30.4-1~ubuntu20.04.1).
The following additional packages will be installed:
binutils binutils-common binutils-x86-64-linux-gnu gcc-9 libasan5
libbinutils libc-dev-bin libc6-dev libcrypt-dev libctf-nobfd0 libctf0
libgcc-9-dev libitm1 liblsan0 libquadmath0 libtsan0 libubsan1 linux-libc-dev
lrzsz manpages-dev
Suggested packages:
binutils-doc gcc-multilib autoconf automake libtool flex bison gcc-doc
gcc-9-multilib gcc-9-doc gcc-9-locales glibc-doc make-doc
The following NEW packages will be installed:
binutils binutils-common binutils-x86-64-linux-gnu gcc gcc-9 libasan5
libbinutils libc-dev-bin libc6-dev libcrypt-dev libctf-nobfd0 libctf0
libgcc-9-dev libitm1 liblsan0 libquadmath0 libtsan0 libubsan1 linux-libc-dev
lrzsz make manpages-dev minicom
0 upgraded, 23 newly installed, 0 to remove and 4 not upgraded.
Need to get 23.6 MB/26.2 MB of archives.
After this operation, 122 MB of additional disk space will be used.
Get:1 cdrom://Ubuntu 20.04.6 LTS _Focal Fossa_ - Release amd64 (20230316) focal/main amd64 gcc amd64 4:9.3.0-1ubuntu2 [5,208 B]
Get:2 cdrom://Ubuntu 20.04.6 LTS _Focal Fossa_ - Release amd64 (20230316) focal/main amd64 libcrypt-dev amd64 1:4.4.10-10ubuntu4 [104 kB]
Get:3 cdrom://Ubuntu 20.04.6 LTS _Focal Fossa_ - Release amd64 (20230316) focal/main amd64 make amd64 4.2.1-1.2 [162 kB]
Get:4 cdrom://Ubuntu 20.04.6 LTS _Focal Fossa_ - Release amd64 (20230316) focal/main amd64 manpages-dev all 5.05-1 [2,266 kB]
Get:5 http://archive.ubuntu.com/ubuntu focal/universe amd64 lrzsz amd64 0.12.21-10 [74.8 kB]
Get:6 http://security.ubuntu.com/ubuntu focal-security/main amd64 binutils-common amd64 2.34-6ubuntu1.7 [207 kB]
Get:7 http://archive.ubuntu.com/ubuntu focal/universe amd64 minicom amd64 2.7.1-1.1 [239 kB]
Get:8 http://security.ubuntu.com/ubuntu focal-security/main amd64 libbinutils amd64 2.34-6ubuntu1.7 [473 kB]
Get:9 http://security.ubuntu.com/ubuntu focal-security/main amd64 libctf-nobfd0 amd64 2.34-6ubuntu1.7 [47.9 kB]
Get:10 http://security.ubuntu.com/ubuntu focal-security/main amd64 libctf0 amd64 2.34-6ubuntu1.7 [46.6 kB]
Get:11 http://security.ubuntu.com/ubuntu focal-security/main amd64 binutils-x86-64-linux-gnu amd64 2.34-6ubuntu1.7 [1,614 kB]
Get:12 http://security.ubuntu.com/ubuntu focal-security/main amd64 binutils amd64 2.34-6ubuntu1.7 [3,380 B]
Get:13 http://security.ubuntu.com/ubuntu focal-security/main amd64 libitm1 amd64 10.5.0-1ubuntu1~20.04 [26.2 kB]
Get:14 http://security.ubuntu.com/ubuntu focal-security/main amd64 libasan5 amd64 9.4.0-1ubuntu1~20.04.2 [2,752 kB]
Get:15 http://security.ubuntu.com/ubuntu focal-security/main amd64 liblsan0 amd64 10.5.0-1ubuntu1~20.04 [835 kB]
Get:16 http://security.ubuntu.com/ubuntu focal-security/main amd64 libtsan0 amd64 10.5.0-1ubuntu1~20.04 [2,016 kB]
Get:17 http://security.ubuntu.com/ubuntu focal-security/main amd64 libubsan1 amd64 10.5.0-1ubuntu1~20.04 [785 kB]
Get:18 http://security.ubuntu.com/ubuntu focal-security/main amd64 libquadmath0 amd64 10.5.0-1ubuntu1~20.04 [146 kB]
Get:19 http://security.ubuntu.com/ubuntu focal-security/main amd64 libgcc-9-dev amd64 9.4.0-1ubuntu1~20.04.2 [2,359 kB]
Get:20 http://security.ubuntu.com/ubuntu focal-security/main amd64 gcc-9 amd64 9.4.0-1ubuntu1~20.04.2 [8,276 kB]
Get:21 http://security.ubuntu.com/ubuntu focal-security/main amd64 libc-dev-bin amd64 2.31-0ubuntu9.14 [71.8 kB]
Get:22 http://security.ubuntu.com/ubuntu focal-security/main amd64 linux-libc-dev amd64 5.4.0-169.187 [1,125 kB]
Get:23 http://security.ubuntu.com/ubuntu focal-security/main amd64 libc6-dev amd64 2.31-0ubuntu9.14 [2,519 kB]
Fetched 23.6 MB in 3s (7,587 kB/s)
Selecting previously unselected package binutils-common:amd64.
(Reading database ... 188728 files and directories currently installed.)
Preparing to unpack .../00-binutils-common_2.34-6ubuntu1.7_amd64.deb ...
Unpacking binutils-common:amd64 (2.34-6ubuntu1.7) ...
Selecting previously unselected package libbinutils:amd64.
Preparing to unpack .../01-libbinutils_2.34-6ubuntu1.7_amd64.deb ...
Unpacking libbinutils:amd64 (2.34-6ubuntu1.7) ...
Selecting previously unselected package libctf-nobfd0:amd64.
Preparing to unpack .../02-libctf-nobfd0_2.34-6ubuntu1.7_amd64.deb ...
Unpacking libctf-nobfd0:amd64 (2.34-6ubuntu1.7) ...
Selecting previously unselected package libctf0:amd64.
Preparing to unpack .../03-libctf0_2.34-6ubuntu1.7_amd64.deb ...
Unpacking libctf0:amd64 (2.34-6ubuntu1.7) ...
Selecting previously unselected package binutils-x86-64-linux-gnu.
Preparing to unpack .../04-binutils-x86-64-linux-gnu_2.34-6ubuntu1.7_amd64.deb ...
Unpacking binutils-x86-64-linux-gnu (2.34-6ubuntu1.7) ...
Selecting previously unselected package binutils.
Preparing to unpack .../05-binutils_2.34-6ubuntu1.7_amd64.deb ...
Unpacking binutils (2.34-6ubuntu1.7) ...
Selecting previously unselected package libitm1:amd64.
Preparing to unpack .../06-libitm1_10.5.0-1ubuntu1~20.04_amd64.deb ...
Unpacking libitm1:amd64 (10.5.0-1ubuntu1~20.04) ...
Selecting previously unselected package libasan5:amd64.
Preparing to unpack .../07-libasan5_9.4.0-1ubuntu1~20.04.2_amd64.deb ...
Unpacking libasan5:amd64 (9.4.0-1ubuntu1~20.04.2) ...
Selecting previously unselected package liblsan0:amd64.
Preparing to unpack .../08-liblsan0_10.5.0-1ubuntu1~20.04_amd64.deb ...
Unpacking liblsan0:amd64 (10.5.0-1ubuntu1~20.04) ...
Selecting previously unselected package libtsan0:amd64.
Preparing to unpack .../09-libtsan0_10.5.0-1ubuntu1~20.04_amd64.deb ...
Unpacking libtsan0:amd64 (10.5.0-1ubuntu1~20.04) ...
Selecting previously unselected package libubsan1:amd64.
Preparing to unpack .../10-libubsan1_10.5.0-1ubuntu1~20.04_amd64.deb ...
Unpacking libubsan1:amd64 (10.5.0-1ubuntu1~20.04) ...
Selecting previously unselected package libquadmath0:amd64.
Preparing to unpack .../11-libquadmath0_10.5.0-1ubuntu1~20.04_amd64.deb ...
Unpacking libquadmath0:amd64 (10.5.0-1ubuntu1~20.04) ...
Selecting previously unselected package libgcc-9-dev:amd64.
Preparing to unpack .../12-libgcc-9-dev_9.4.0-1ubuntu1~20.04.2_amd64.deb ...
Unpacking libgcc-9-dev:amd64 (9.4.0-1ubuntu1~20.04.2) ...
Selecting previously unselected package gcc-9.
Preparing to unpack .../13-gcc-9_9.4.0-1ubuntu1~20.04.2_amd64.deb ...
Unpacking gcc-9 (9.4.0-1ubuntu1~20.04.2) ...
Selecting previously unselected package gcc.
Preparing to unpack .../14-gcc_9.3.0-1ubuntu2_amd64.deb ...
Unpacking gcc (4:9.3.0-1ubuntu2) ...
Selecting previously unselected package libc-dev-bin.
Preparing to unpack .../15-libc-dev-bin_2.31-0ubuntu9.14_amd64.deb ...
Unpacking libc-dev-bin (2.31-0ubuntu9.14) ...
Selecting previously unselected package linux-libc-dev:amd64.
Preparing to unpack .../16-linux-libc-dev_5.4.0-169.187_amd64.deb ...
Unpacking linux-libc-dev:amd64 (5.4.0-169.187) ...
Selecting previously unselected package libcrypt-dev:amd64.
Preparing to unpack .../17-libcrypt-dev_4.4.10-10ubuntu4_amd64.deb ...
Unpacking libcrypt-dev:amd64 (1:4.4.10-10ubuntu4) ...
Selecting previously unselected package libc6-dev:amd64.
Preparing to unpack .../18-libc6-dev_2.31-0ubuntu9.14_amd64.deb ...
Unpacking libc6-dev:amd64 (2.31-0ubuntu9.14) ...
Selecting previously unselected package lrzsz.
Preparing to unpack .../19-lrzsz_0.12.21-10_amd64.deb ...
Unpacking lrzsz (0.12.21-10) ...
Selecting previously unselected package make.
Preparing to unpack .../20-make_4.2.1-1.2_amd64.deb ...
Unpacking make (4.2.1-1.2) ...
Selecting previously unselected package manpages-dev.
Preparing to unpack .../21-manpages-dev_5.05-1_all.deb ...
Unpacking manpages-dev (5.05-1) ...
Selecting previously unselected package minicom.
Preparing to unpack .../22-minicom_2.7.1-1.1_amd64.deb ...
Unpacking minicom (2.7.1-1.1) ...
Setting up manpages-dev (5.05-1) ...
Setting up binutils-common:amd64 (2.34-6ubuntu1.7) ...
Setting up linux-libc-dev:amd64 (5.4.0-169.187) ...
Setting up libctf-nobfd0:amd64 (2.34-6ubuntu1.7) ...
Setting up libasan5:amd64 (9.4.0-1ubuntu1~20.04.2) ...
Setting up make (4.2.1-1.2) ...
Setting up libquadmath0:amd64 (10.5.0-1ubuntu1~20.04) ...
Setting up libubsan1:amd64 (10.5.0-1ubuntu1~20.04) ...
Setting up minicom (2.7.1-1.1) ...
Setting up libcrypt-dev:amd64 (1:4.4.10-10ubuntu4) ...
Setting up libbinutils:amd64 (2.34-6ubuntu1.7) ...
Setting up libc-dev-bin (2.31-0ubuntu9.14) ...
Setting up lrzsz (0.12.21-10) ...
Setting up liblsan0:amd64 (10.5.0-1ubuntu1~20.04) ...
Setting up libitm1:amd64 (10.5.0-1ubuntu1~20.04) ...
Setting up libtsan0:amd64 (10.5.0-1ubuntu1~20.04) ...
Setting up libctf0:amd64 (2.34-6ubuntu1.7) ...
Setting up libgcc-9-dev:amd64 (9.4.0-1ubuntu1~20.04.2) ...
Setting up libc6-dev:amd64 (2.31-0ubuntu9.14) ...
Setting up binutils-x86-64-linux-gnu (2.34-6ubuntu1.7) ...
Setting up binutils (2.34-6ubuntu1.7) ...
Setting up gcc-9 (9.4.0-1ubuntu1~20.04.2) ...
Setting up gcc (4:9.3.0-1ubuntu2) ...
Processing triggers for mime-support (3.64ubuntu1) ...
Processing triggers for gnome-menus (3.36.0-1ubuntu1) ...
Processing triggers for libc-bin (2.31-0ubuntu9.14) ...
Processing triggers for man-db (2.9.1-1) ...
Processing triggers for desktop-file-utils (0.24-1ubuntu3) ...
Loading internal logger. Log::Log4perl recommended for better logging
CPAN.pm requires configuration, but most of it can be done automatically.
If you answer 'no' below, you will enter an interactive dialog for each
configuration option instead.
Would you like to configure as much as possible automatically? [yes] Fetching with LWP:
http://www.cpan.org/authors/01mailrc.txt.gz
Reading '/root/.cpan/sources/authors/01mailrc.txt.gz'
............................................................................DONE
Fetching with LWP:
http://www.cpan.org/modules/02packages.details.txt.gz
Reading '/root/.cpan/sources/modules/02packages.details.txt.gz'
Database was generated on Fri, 15 Dec 2023 06:17:01 GMT
..............
New CPAN.pm version (v2.36) available.
[Currently running version is v2.22]
You might want to try
install CPAN
reload cpan
to both upgrade CPAN.pm and run the new version without leaving
the current session.
..............................................................DONE
Fetching with LWP:
http://www.cpan.org/modules/03modlist.data.gz
Reading '/root/.cpan/sources/modules/03modlist.data.gz'
DONE
Writing /root/.cpan/Metadata
Running install for module 'UUID::Tiny'
Fetching with LWP:
http://www.cpan.org/authors/id/C/CA/CAUGUSTIN/UUID-Tiny-1.04.tar.gz
Fetching with LWP:
http://www.cpan.org/authors/id/C/CA/CAUGUSTIN/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/C/CA/CAUGUSTIN/UUID-Tiny-1.04.tar.gz ok
'YAML' not installed, will not store persistent state
Configuring C/CA/CAUGUSTIN/UUID-Tiny-1.04.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for UUID::Tiny
Writing MYMETA.yml and MYMETA.json
CAUGUSTIN/UUID-Tiny-1.04.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for C/CA/CAUGUSTIN/UUID-Tiny-1.04.tar.gz
cp lib/UUID/Tiny.pm blib/lib/UUID/Tiny.pm
Manifying 1 pod document
CAUGUSTIN/UUID-Tiny-1.04.tar.gz
/usr/bin/make -- OK
Running make test for CAUGUSTIN/UUID-Tiny-1.04.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.t ......... 1/1 # Testing UUID::Tiny 1.04, Perl 5.030000, /usr/bin/perl
t/00-load.t ......... ok
t/01-UUID-std.t ..... ok
t/02-UUID-legacy.t .. ok
t/03-UUID-fork.t .... ok
t/boilerplate.t ..... ok
t/pod-coverage.t .... skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod.t ............. skipped: Test::Pod 1.22 required for testing POD
All tests successful.
Files=7, Tests=10084, 3 wallclock secs ( 0.51 usr 0.02 sys + 1.51 cusr 0.13 csys = 2.17 CPU)
Result: PASS
CAUGUSTIN/UUID-Tiny-1.04.tar.gz
/usr/bin/make test -- OK
Running make install for CAUGUSTIN/UUID-Tiny-1.04.tar.gz
Manifying 1 pod document
Installing /usr/local/share/perl/5.30.0/UUID/Tiny.pm
Installing /usr/local/man/man3/UUID::Tiny.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
CAUGUSTIN/UUID-Tiny-1.04.tar.gz
/usr/bin/make install -- OK
Running install for module 'IPC::Shareable'
Fetching with LWP:
http://www.cpan.org/authors/id/S/ST/STEVEB/IPC-Shareable-1.13.tar.gz
Fetching with LWP:
http://www.cpan.org/authors/id/S/ST/STEVEB/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/S/ST/STEVEB/IPC-Shareable-1.13.tar.gz ok
Configuring S/ST/STEVEB/IPC-Shareable-1.13.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Warning: prerequisite JSON 0 not found.
Warning: prerequisite Mock::Sub 0 not found.
Warning: prerequisite String::CRC32 0 not found.
Warning: prerequisite Test::SharedFork 0.35 not found.
Generating a Unix-style Makefile
Writing Makefile for IPC::Shareable
Writing MYMETA.yml and MYMETA.json
STEVEB/IPC-Shareable-1.13.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for S/ST/STEVEB/IPC-Shareable-1.13.tar.gz
---- Unsatisfied dependencies detected during ----
---- STEVEB/IPC-Shareable-1.13.tar.gz ----
JSON [requires]
Mock::Sub [build_requires]
String::CRC32 [requires]
Test::SharedFork [build_requires]
Running install for module 'JSON'
Fetching with LWP:
http://www.cpan.org/authors/id/I/IS/ISHIGAKI/JSON-4.10.tar.gz
Fetching with LWP:
http://www.cpan.org/authors/id/I/IS/ISHIGAKI/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/I/IS/ISHIGAKI/JSON-4.10.tar.gz ok
Configuring I/IS/ISHIGAKI/JSON-4.10.tar.gz with Makefile.PL
Welcome to JSON (v.4.10)
=============================
** BACKWARD INCOMPATIBILITY **
Since version 2.90, stringification (and string comparison) for
JSON::true and JSON::false has not been overloaded. It shouldn't
matter as long as you treat them as boolean values, but a code that
expects they are stringified as "true" or "false" doesn't work as
you have expected any more.
if (JSON::true eq 'true') { # now fails
print "The result is 1 now."; # => The result is 1 now.
And now these boolean values don't inherit JSON::Boolean, either.
When you need to test a value is a JSON boolean value or not, use
JSON::is_bool function, instead of testing the value inherits
a particular boolean class or not.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for JSON
Writing MYMETA.yml and MYMETA.json
ISHIGAKI/JSON-4.10.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for I/IS/ISHIGAKI/JSON-4.10.tar.gz
---- Unsatisfied dependencies detected during ----
---- ISHIGAKI/JSON-4.10.tar.gz ----
JSON::XS [requires,optional]
cp lib/JSON/backportPP/Compat5005.pm blib/lib/JSON/backportPP/Compat5005.pm
cp lib/JSON.pm blib/lib/JSON.pm
cp lib/JSON/backportPP.pm blib/lib/JSON/backportPP.pm
cp lib/JSON/backportPP/Compat5006.pm blib/lib/JSON/backportPP/Compat5006.pm
cp lib/JSON/backportPP/Boolean.pm blib/lib/JSON/backportPP/Boolean.pm
Manifying 5 pod documents
ISHIGAKI/JSON-4.10.tar.gz
/usr/bin/make -- OK
Running make test for ISHIGAKI/JSON-4.10.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_backend_version.t ......................... # JSON::backportPP 4.12
t/00_backend_version.t ......................... ok
t/00_load.t .................................... ok
t/00_load_backport_pp.t ........................ ok
t/01_utf8.t .................................... ok
t/02_error.t ................................... ok
t/03_types.t ................................... ok
t/04_dwiw_encode.t ............................. ok
t/05_dwiw_decode.t ............................. ok
t/06_pc_pretty.t ............................... ok
t/07_pc_esc.t .................................. ok
t/08_pc_base.t ................................. ok
t/09_pc_extra_number.t ......................... ok
t/104_sortby.t ................................. ok
t/105_esc_slash.t .............................. ok
t/106_allow_barekey.t .......................... ok
t/107_allow_singlequote.t ...................... ok
t/108_decode.t ................................. ok
t/109_encode.t ................................. ok
t/10_pc_keysort.t .............................. ok
t/110_bignum.t ................................. ok
t/112_upgrade.t ................................ ok
t/113_overloaded_eq.t .......................... ok
t/114_decode_prefix.t .......................... ok
t/115_tie_ixhash.t ............................. ok
t/116_incr_parse_fixed.t ....................... ok
t/117_numbers.t ................................ ok
t/118_boolean_values.t ......................... ok
t/119_incr_parse_utf8.t ........................ ok
t/11_pc_expo.t ................................. ok
t/120_incr_parse_truncated.t ................... ok
t/12_blessed.t ................................. ok
t/13_limit.t ................................... ok
t/14_latin1.t .................................. ok
t/15_prefix.t .................................. ok
t/16_tied.t .................................... ok
t/17_relaxed.t ................................. ok
t/18_json_checker.t ............................ ok
t/19_incr.t .................................... ok
t/20_faihu.t ................................... ok
t/20_unknown.t ................................. ok
t/21_evans.t ................................... ok
t/22_comment_at_eof.t .......................... ok
t/52_object.t .................................. ok
t/99_binary.t .................................. ok
t/e00_func.t ................................... ok
t/e01_property.t ............................... ok
t/e02_bool.t ................................... 1/8 # 1
t/e02_bool.t ................................... ok
t/e03_bool2.t .................................. ok
t/e11_conv_blessed_univ.t ...................... ok
t/e90_misc.t ................................... ok
t/gh_28_json_test_suite.t ...................... ok
t/gh_29_trailing_false_value.t ................. ok
t/rt_116998_wrong_character_offset.t ........... ok
t/rt_122270_is_bool_for_obsolete_xs_boolean.t .. ok
t/rt_122270_old_xs_boolean.t ................... ok
t/rt_90071_incr_parse.t ........................ ok
t/x00_load.t ................................... ok
t/x02_error.t .................................. ok
t/x12_blessed.t ................................ ok
t/x16_tied.t ................................... ok
t/x17_strange_overload.t ....................... ok
t/xe04_escape_slash.t .......................... ok
t/xe05_indent_length.t ......................... ok
t/xe12_boolean.t ............................... ok
t/xe19_xs_and_suportbypp.t ..................... ok
t/xe20_croak_message.t ......................... ok
t/xe21_is_pp.t ................................. ok
t/zero-mojibake.t .............................. ok
All tests successful.
Files=68, Tests=26111, 43 wallclock secs ( 2.70 usr 0.28 sys + 42.77 cusr 0.69 csys = 46.44 CPU)
Result: PASS
ISHIGAKI/JSON-4.10.tar.gz
/usr/bin/make test -- OK
Running make install for ISHIGAKI/JSON-4.10.tar.gz
Manifying 5 pod documents
Installing /usr/local/share/perl/5.30.0/JSON.pm
Installing /usr/local/share/perl/5.30.0/JSON/backportPP.pm
Installing /usr/local/share/perl/5.30.0/JSON/backportPP/Boolean.pm
Installing /usr/local/share/perl/5.30.0/JSON/backportPP/Compat5006.pm
Installing /usr/local/share/perl/5.30.0/JSON/backportPP/Compat5005.pm
Installing /usr/local/man/man3/JSON::backportPP::Compat5006.3pm
Installing /usr/local/man/man3/JSON::backportPP::Compat5005.3pm
Installing /usr/local/man/man3/JSON::backportPP::Boolean.3pm
Installing /usr/local/man/man3/JSON::backportPP.3pm
Installing /usr/local/man/man3/JSON.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
ISHIGAKI/JSON-4.10.tar.gz
/usr/bin/make install -- OK
Running install for module 'JSON::XS'
Fetching with LWP:
http://www.cpan.org/authors/id/M/ML/MLEHMANN/JSON-XS-4.03.tar.gz
Fetching with LWP:
http://www.cpan.org/authors/id/M/ML/MLEHMANN/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/M/ML/MLEHMANN/JSON-XS-4.03.tar.gz ok
---- Unsatisfied dependencies detected during ----
---- MLEHMANN/JSON-XS-4.03.tar.gz ----
Canary::Stability [build_requires]
Running install for module 'Canary::Stability'
Fetching with LWP:
http://www.cpan.org/authors/id/M/ML/MLEHMANN/Canary-Stability-2013.tar.gz
Checksum for /root/.cpan/sources/authors/id/M/ML/MLEHMANN/Canary-Stability-2013.tar.gz ok
Configuring M/ML/MLEHMANN/Canary-Stability-2013.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Canary::Stability
Writing MYMETA.yml and MYMETA.json
MLEHMANN/Canary-Stability-2013.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for M/ML/MLEHMANN/Canary-Stability-2013.tar.gz
cp Stability.pm blib/lib/Canary/Stability.pm
Manifying 1 pod document
MLEHMANN/Canary-Stability-2013.tar.gz
/usr/bin/make -- OK
Running make test for MLEHMANN/Canary-Stability-2013.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_load.t .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr + 0.01 sys = 0.03 CPU)
Result: PASS
MLEHMANN/Canary-Stability-2013.tar.gz
/usr/bin/make test -- OK
Running make install for MLEHMANN/Canary-Stability-2013.tar.gz
Manifying 1 pod document
Installing /usr/local/share/perl/5.30.0/Canary/Stability.pm
Installing /usr/local/man/man3/Canary::Stability.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
MLEHMANN/Canary-Stability-2013.tar.gz
/usr/bin/make install -- OK
MLEHMANN/JSON-XS-4.03.tar.gz
Has already been unwrapped into directory /root/.cpan/build/JSON-XS-4.03-0
Configuring M/ML/MLEHMANN/JSON-XS-4.03.tar.gz with Makefile.PL
***
*** Canary::Stability COMPATIBILITY AND SUPPORT CHECK
*** =================================================
***
*** Hi!
***
*** I do my best to provide predictable and reliable software.
***
*** However, in recent releases, P5P (who maintain perl) have been
*** introducing regressions that are sometimes subtle and at other times
*** catastrophic, often for personal preferences with little or no concern
*** for existing code, most notably CPAN.
***
*** For this reason, it has become very hard for me to maintain the level
*** of reliability and support I have committed myself to in the past, at
*** least with some perl versions: I simply can't keep up working around new
*** bugs or gratituous incompatibilities, and in turn you might suffer from
*** unanticipated problems.
***
*** Therefore I have introduced a support and compatibility check, the results
*** of which follow below, together with a FAQ and some recommendations.
***
*** This check is just to let you know that there might be a risk, so you can
*** make judgement calls on how to proceed - it will not keep the module from
*** installing or working.
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version 5.030000, likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by JSON::XS.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
***
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
*** With luck, no. While some distributions are known to fail
*** already, most should probably work. This message is here
*** to alert you that your perl is not supported by JSON::XS,
*** and if things go wrong, you either need to downgrade, or
*** sidegrade to the stability variant of your perl version,
*** or simply live with the consequences.
***
*** What is this canary thing?
*** It's purpose is to check support status of JSON::XS with
*** respect to your perl version.
***
*** What is this "stability branch"?
*** It's a branch or fork of the official perl, by schmorp, to
*** improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
*** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
*** More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stableperl.schmorp.de/
***
Continue anyways? [y] y
Checking if your kit is complete...
Looks good
Warning: prerequisite Types::Serialiser 0 not found.
Warning: prerequisite common::sense 0 not found.
Generating a Unix-style Makefile
Writing Makefile for JSON::XS
Writing MYMETA.yml and MYMETA.json
MLEHMANN/JSON-XS-4.03.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for M/ML/MLEHMANN/JSON-XS-4.03.tar.gz
---- Unsatisfied dependencies detected during ----
---- MLEHMANN/JSON-XS-4.03.tar.gz ----
Types::Serialiser [requires]
common::sense [requires]
Running install for module 'Types::Serialiser'
Fetching with LWP:
http://www.cpan.org/authors/id/M/ML/MLEHMANN/Types-Serialiser-1.01.tar.gz
Checksum for /root/.cpan/sources/authors/id/M/ML/MLEHMANN/Types-Serialiser-1.01.tar.gz ok
Configuring M/ML/MLEHMANN/Types-Serialiser-1.01.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Warning: prerequisite common::sense 0 not found.
Generating a Unix-style Makefile
Writing Makefile for Types::Serialiser
Writing MYMETA.yml and MYMETA.json
MLEHMANN/Types-Serialiser-1.01.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for M/ML/MLEHMANN/Types-Serialiser-1.01.tar.gz
---- Unsatisfied dependencies detected during ----
---- MLEHMANN/Types-Serialiser-1.01.tar.gz ----
common::sense [requires]
Running install for module 'common::sense'
Fetching with LWP:
http://www.cpan.org/authors/id/M/ML/MLEHMANN/common-sense-3.75.tar.gz
Checksum for /root/.cpan/sources/authors/id/M/ML/MLEHMANN/common-sense-3.75.tar.gz ok
Configuring M/ML/MLEHMANN/common-sense-3.75.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for common::sense
Writing MYMETA.yml and MYMETA.json
MLEHMANN/common-sense-3.75.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for M/ML/MLEHMANN/common-sense-3.75.tar.gz
"/usr/bin/perl" sense.pm.PL sense.pm
cp sense.pod blib/lib/common/sense.pod
cp sense.pm blib/arch/common/sense.pm
Manifying 2 pod documents
MLEHMANN/common-sense-3.75.tar.gz
/usr/bin/make -- OK
Running make test for MLEHMANN/common-sense-3.75.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_load.t .. ok
t/01_arch.t .. ok
All tests successful.
Files=2, Tests=2, 0 wallclock secs ( 0.02 usr + 0.00 sys = 0.02 CPU)
Result: PASS
MLEHMANN/common-sense-3.75.tar.gz
/usr/bin/make test -- OK
Running make install for MLEHMANN/common-sense-3.75.tar.gz
Manifying 2 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/common/sense.pm
Installing /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/common/sense.pod
Installing /usr/local/man/man3/common::sense.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
MLEHMANN/common-sense-3.75.tar.gz
/usr/bin/make install -- OK
MLEHMANN/Types-Serialiser-1.01.tar.gz
Has already been unwrapped into directory /root/.cpan/build/Types-Serialiser-1.01-0
MLEHMANN/Types-Serialiser-1.01.tar.gz
Has already been prepared
Running make for M/ML/MLEHMANN/Types-Serialiser-1.01.tar.gz
cp Serialiser.pm blib/lib/Types/Serialiser.pm
cp Serialiser/Error.pm blib/lib/Types/Serialiser/Error.pm
Manifying 2 pod documents
MLEHMANN/Types-Serialiser-1.01.tar.gz
/usr/bin/make -- OK
Running make test for MLEHMANN/Types-Serialiser-1.01.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_load.t ... ok
t/51_types.t .. ok
All tests successful.
Files=2, Tests=25, 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU)
Result: PASS
MLEHMANN/Types-Serialiser-1.01.tar.gz
/usr/bin/make test -- OK
Running make install for MLEHMANN/Types-Serialiser-1.01.tar.gz
Manifying 2 pod documents
Installing /usr/local/share/perl/5.30.0/Types/Serialiser.pm
Installing /usr/local/share/perl/5.30.0/Types/Serialiser/Error.pm
Installing /usr/local/man/man3/Types::Serialiser::Error.3pm
Installing /usr/local/man/man3/Types::Serialiser.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
MLEHMANN/Types-Serialiser-1.01.tar.gz
/usr/bin/make install -- OK
MLEHMANN/JSON-XS-4.03.tar.gz
Has already been unwrapped into directory /root/.cpan/build/JSON-XS-4.03-0
MLEHMANN/JSON-XS-4.03.tar.gz
Has already been prepared
Running make for M/ML/MLEHMANN/JSON-XS-4.03.tar.gz
cp XS/Boolean.pm blib/lib/JSON/XS/Boolean.pm
cp XS.pm blib/lib/JSON/XS.pm
Running Mkbootstrap for XS ()
chmod 644 "XS.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XS.bs blib/arch/auto/JSON/XS/XS.bs 644
"/usr/bin/perl" "/usr/share/perl/5.30/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.30/ExtUtils/typemap' -typemap '/root/.cpan/build/JSON-XS-4.03-0/typemap' XS.xs > XS.xsc
mv XS.xsc XS.c
x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"4.03\" -DXS_VERSION=\"4.03\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.30/CORE" XS.c
In file included from /usr/lib/x86_64-linux-gnu/perl/5.30/CORE/perl.h:28,
from XS.xs:2:
XS.xs: In function ‘encode_sv’:
/usr/lib/x86_64-linux-gnu/perl/5.30/CORE/config.h:909:27: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result]
909 | #define Gconvert(x,n,t,b) gcvt((x),(n),(b))
| ^~~~~~~~~~~~~~~~~
XS.xs:910:7: note: in expansion of macro ‘Gconvert’
910 | Gconvert (SvNVX (sv), NV_DIG, 0, enc->cur);
| ^~~~~~~~
rm -f blib/arch/auto/JSON/XS/XS.so
x86_64-linux-gnu-gcc -shared -L/usr/local/lib -fstack-protector-strong XS.o -o blib/arch/auto/JSON/XS/XS.so \
\
chmod 755 blib/arch/auto/JSON/XS/XS.so
cp bin/json_xs blib/script/json_xs
"/usr/bin/perl" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/json_xs
Manifying 1 pod document
Manifying 2 pod documents
MLEHMANN/JSON-XS-4.03.tar.gz
/usr/bin/make -- OK
Running make test for MLEHMANN/JSON-XS-4.03.tar.gz
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XS.bs blib/arch/auto/JSON/XS/XS.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_load.t ............. ok
t/01_utf8.t ............. ok
t/02_error.t ............ ok
t/03_types.t ............ ok
t/04_dwiw_encode.t ...... ok
t/05_dwiw_decode.t ...... ok
t/06_pc_pretty.t ........ ok
t/07_pc_esc.t ........... ok
t/08_pc_base.t .......... ok
t/09_pc_extra_number.t .. ok
t/10_pc_keysort.t ....... ok
t/11_pc_expo.t .......... ok
t/12_blessed.t .......... ok
t/13_limit.t ............ ok
t/14_latin1.t ........... ok
t/15_prefix.t ........... ok
t/16_tied.t ............. ok
t/17_relaxed.t .......... ok
t/18_json_checker.t ..... ok
t/19_incr.t ............. ok
t/20_faihu.t ............ ok
t/21_evans.t ............ ok
t/22_comment_at_eof.t ... ok
t/52_object.t ........... ok
t/99_binary.t ........... ok
All tests successful.
Files=25, Tests=25635, 2 wallclock secs ( 0.78 usr 0.01 sys + 1.30 cusr 0.11 csys = 2.20 CPU)
Result: PASS
MLEHMANN/JSON-XS-4.03.tar.gz
/usr/bin/make test -- OK
Running make install for MLEHMANN/JSON-XS-4.03.tar.gz
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XS.bs blib/arch/auto/JSON/XS/XS.bs 644
Manifying 1 pod document
Manifying 2 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/auto/JSON/XS/XS.so
Installing /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/JSON/XS.pm
Installing /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/JSON/XS/Boolean.pm
Installing /usr/local/man/man1/json_xs.1p
Installing /usr/local/man/man3/JSON::XS::Boolean.3pm
Installing /usr/local/man/man3/JSON::XS.3pm
Installing /usr/local/bin/json_xs
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
MLEHMANN/JSON-XS-4.03.tar.gz
/usr/bin/make install -- OK
Running install for module 'Mock::Sub'
Fetching with LWP:
http://www.cpan.org/authors/id/S/ST/STEVEB/Mock-Sub-1.09.tar.gz
Checksum for /root/.cpan/sources/authors/id/S/ST/STEVEB/Mock-Sub-1.09.tar.gz ok
Configuring S/ST/STEVEB/Mock-Sub-1.09.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Mock::Sub
Writing MYMETA.yml and MYMETA.json
STEVEB/Mock-Sub-1.09.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for S/ST/STEVEB/Mock-Sub-1.09.tar.gz
cp lib/Mock/Sub/Child.pm blib/lib/Mock/Sub/Child.pm
cp lib/Mock/Sub.pm blib/lib/Mock/Sub.pm
Manifying 2 pod documents
STEVEB/Mock-Sub-1.09.tar.gz
/usr/bin/make -- OK
Running make test for STEVEB/Mock-Sub-1.09.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.t .................... 1/20 # Testing Mock::Sub 1.09, Perl 5.030000, /usr/bin/perl
t/00-load.t .................... ok
t/01-called.t .................. ok
t/02-called_count.t ............ ok
t/03-instantiate.t ............. ok
t/04-return_value.t ............ ok
t/05-side_effect.t ............. ok
t/06-reset.t ................... ok
t/07-name.t .................... ok
t/08-called_with.t ............. ok
t/09-void_context.t ............ ok
t/10-unmock.t .................. ok
t/11-state.t ................... ok
t/12-mocked_subs.t ............. ok
t/13-mocked_objects.t .......... ok
t/14-core_subs.t ............... ok
t/15-remock.t .................. ok
t/16-non_exist_warn.t .......... ok
t/17-no_warnings.t ............. ok
t/18-bug_25-retval_override.t .. ok
t/19-return_params.t ........... ok
t/manifest.t ................... skipped: Author tests not required for installation
t/pod-coverage.t ............... skipped: Author tests not required for installation
t/pod.t ........................ skipped: Author tests not required for installation
All tests successful.
Files=23, Tests=243, 1 wallclock secs ( 0.07 usr 0.02 sys + 0.95 cusr 0.17 csys = 1.21 CPU)
Result: PASS
STEVEB/Mock-Sub-1.09.tar.gz
/usr/bin/make test -- OK
Running make install for STEVEB/Mock-Sub-1.09.tar.gz
Manifying 2 pod documents
Installing /usr/local/share/perl/5.30.0/Mock/Sub.pm
Installing /usr/local/share/perl/5.30.0/Mock/Sub/Child.pm
Installing /usr/local/man/man3/Mock::Sub::Child.3pm
Installing /usr/local/man/man3/Mock::Sub.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
STEVEB/Mock-Sub-1.09.tar.gz
/usr/bin/make install -- OK
Running install for module 'String::CRC32'
Fetching with LWP:
http://www.cpan.org/authors/id/L/LE/LEEJO/String-CRC32-2.100.tar.gz
Fetching with LWP:
http://www.cpan.org/authors/id/L/LE/LEEJO/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/L/LE/LEEJO/String-CRC32-2.100.tar.gz ok
Configuring L/LE/LEEJO/String-CRC32-2.100.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for String::CRC32
Writing MYMETA.yml and MYMETA.json
LEEJO/String-CRC32-2.100.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for L/LE/LEEJO/String-CRC32-2.100.tar.gz
cp CRC32.pm blib/lib/String/CRC32.pm
cp CRC32.pod blib/lib/String/CRC32.pod
Running Mkbootstrap for CRC32 ()
chmod 644 "CRC32.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- CRC32.bs blib/arch/auto/String/CRC32/CRC32.bs 644
"/usr/bin/perl" "/usr/share/perl/5.30/ExtUtils/xsubpp" -typemap '/usr/share/perl/5.30/ExtUtils/typemap' -typemap '/root/.cpan/build/String-CRC32-2.100-0/typemap' CRC32.xs > CRC32.xsc
mv CRC32.xsc CRC32.c
x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"2.100\" -DXS_VERSION=\"2.100\" -fPIC "-I/usr/lib/x86_64-linux-gnu/perl/5.30/CORE" CRC32.c
rm -f blib/arch/auto/String/CRC32/CRC32.so
x86_64-linux-gnu-gcc -shared -L/usr/local/lib -fstack-protector-strong CRC32.o -o blib/arch/auto/String/CRC32/CRC32.so \
\
chmod 755 blib/arch/auto/String/CRC32/CRC32.so
Manifying 1 pod document
LEEJO/String-CRC32-2.100.tar.gz
/usr/bin/make -- OK
Running make test for LEEJO/String-CRC32-2.100.tar.gz
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- CRC32.bs blib/arch/auto/String/CRC32/CRC32.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/crc.t .. ok
All tests successful.
Files=1, Tests=27, 0 wallclock secs ( 0.02 usr + 0.00 sys = 0.02 CPU)
Result: PASS
LEEJO/String-CRC32-2.100.tar.gz
/usr/bin/make test -- OK
Running make install for LEEJO/String-CRC32-2.100.tar.gz
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- CRC32.bs blib/arch/auto/String/CRC32/CRC32.bs 644
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/auto/String/CRC32/CRC32.so
Installing /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/String/CRC32.pod
Installing /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/String/CRC32.pm
Installing /usr/local/man/man3/String::CRC32.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
LEEJO/String-CRC32-2.100.tar.gz
/usr/bin/make install -- OK
Running install for module 'Test::SharedFork'
Fetching with LWP:
http://www.cpan.org/authors/id/E/EX/EXODIST/Test-SharedFork-0.35.tar.gz
Fetching with LWP:
http://www.cpan.org/authors/id/E/EX/EXODIST/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/E/EX/EXODIST/Test-SharedFork-0.35.tar.gz ok
Configuring E/EX/EXODIST/Test-SharedFork-0.35.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Warning: prerequisite Test::Requires 0 not found.
Generating a Unix-style Makefile
Writing Makefile for Test::SharedFork
Writing MYMETA.yml and MYMETA.json
EXODIST/Test-SharedFork-0.35.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for E/EX/EXODIST/Test-SharedFork-0.35.tar.gz
---- Unsatisfied dependencies detected during ----
---- EXODIST/Test-SharedFork-0.35.tar.gz ----
Test::Requires [build_requires]
Running install for module 'Test::Requires'
Fetching with LWP:
http://www.cpan.org/authors/id/T/TO/TOKUHIROM/Test-Requires-0.11.tar.gz
Fetching with LWP:
http://www.cpan.org/authors/id/T/TO/TOKUHIROM/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/T/TO/TOKUHIROM/Test-Requires-0.11.tar.gz ok
Configuring T/TO/TOKUHIROM/Test-Requires-0.11.tar.gz with Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Test::Requires
Writing MYMETA.yml and MYMETA.json
TOKUHIROM/Test-Requires-0.11.tar.gz
/usr/bin/perl Makefile.PL INSTALLDIRS=site -- OK
Running make for T/TO/TOKUHIROM/Test-Requires-0.11.tar.gz
cp lib/Test/Requires.pm blib/lib/Test/Requires.pm
Manifying 1 pod document
TOKUHIROM/Test-Requires-0.11.tar.gz
/usr/bin/make -- OK
Running make test for TOKUHIROM/Test-Requires-0.11.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_compile.t ......... 1/1 # Test::More: 1.302162
t/00_compile.t ......... ok
t/01_simple.t .......... ok
t/02_no_plan.t ......... ok
t/03_import_hashref.t .. skipped: Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found
t/04_import_array.t .... skipped: Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found
t/05_success.t ......... ok
t/06_perlver.t ......... ok
All tests successful.
Files=7, Tests=15, 1 wallclock secs ( 0.03 usr 0.00 sys + 0.25 cusr 0.08 csys = 0.36 CPU)
Result: PASS
TOKUHIROM/Test-Requires-0.11.tar.gz
/usr/bin/make test -- OK
Running make install for TOKUHIROM/Test-Requires-0.11.tar.gz
Manifying 1 pod document
Installing /usr/local/share/perl/5.30.0/Test/Requires.pm
Installing /usr/local/man/man3/Test::Requires.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
TOKUHIROM/Test-Requires-0.11.tar.gz
/usr/bin/make install -- OK
EXODIST/Test-SharedFork-0.35.tar.gz
Has already been unwrapped into directory /root/.cpan/build/Test-SharedFork-0.35-0
EXODIST/Test-SharedFork-0.35.tar.gz
Has already been prepared
Running make for E/EX/EXODIST/Test-SharedFork-0.35.tar.gz
cp lib/Test/SharedFork/Scalar.pm blib/lib/Test/SharedFork/Scalar.pm
cp lib/Test/SharedFork/Store.pm blib/lib/Test/SharedFork/Store.pm
cp lib/Test/SharedFork/Array.pm blib/lib/Test/SharedFork/Array.pm
cp lib/Test/SharedFork.pm blib/lib/Test/SharedFork.pm
Manifying 1 pod document
EXODIST/Test-SharedFork-0.35.tar.gz
/usr/bin/make -- OK
Running make test for EXODIST/Test-SharedFork-0.35.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_compile.t ........... 1/1 # Test::Builder::VERSION: 1.302162
t/00_compile.t ........... ok
t/01_simple.t ............ ok
t/02_fork_method.t ....... ok
t/03_toomany_run.t ....... ok
t/04_test_before_fork.t .. ok
t/05_nest.t .............. ok
t/06_fail_lineno.t ....... ok
t/07_lazy_load.t ......... ok
t/08_threads.t ........... skipped: Not implemented yet
t/09_very_simple.t ....... ok
t/10_subtest.t ...........
# Failed test 'child three'
# at t/nest/subtest.ttt line 14.
# Looks like you failed 1 test of 6.
# Failed test 'foo'
# at t/nest/subtest.ttt line 19.
# Looks like you failed 1 test of 1.
t/10_subtest.t ........... ok
t/11_failure_location.t .. ok
t/12_is_passing.t ........ 1/? # ok 1
# not ok 2
# # Failed test at t/12_is_passing.t line 18.
# ok 3
t/12_is_passing.t ........ ok
All tests successful.
Test Summary Report
-------------------
t/10_subtest.t (Wstat: 0 Tests: 1 Failed: 0)
TODO passed: 1
Files=13, Tests=137, 41 wallclock secs ( 0.06 usr 0.01 sys + 0.94 cusr 0.15 csys = 1.16 CPU)
Result: PASS
EXODIST/Test-SharedFork-0.35.tar.gz
/usr/bin/make test -- OK
Running make install for EXODIST/Test-SharedFork-0.35.tar.gz
Manifying 1 pod document
Installing /usr/local/share/perl/5.30.0/Test/SharedFork.pm
Installing /usr/local/share/perl/5.30.0/Test/SharedFork/Array.pm
Installing /usr/local/share/perl/5.30.0/Test/SharedFork/Store.pm
Installing /usr/local/share/perl/5.30.0/Test/SharedFork/Scalar.pm
Installing /usr/local/man/man3/Test::SharedFork.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
EXODIST/Test-SharedFork-0.35.tar.gz
/usr/bin/make install -- OK
STEVEB/IPC-Shareable-1.13.tar.gz
Has already been unwrapped into directory /root/.cpan/build/IPC-Shareable-1.13-0
STEVEB/IPC-Shareable-1.13.tar.gz
Has already been prepared
Running make for S/ST/STEVEB/IPC-Shareable-1.13.tar.gz
cp lib/IPC/Shareable/SharedMem.pm blib/lib/IPC/Shareable/SharedMem.pm
cp ipc.pl blib/lib/IPC/ipc.pl
cp lib/IPC/Shareable.pm blib/lib/IPC/Shareable.pm
Manifying 2 pod documents
STEVEB/IPC-Shareable-1.13.tar.gz
/usr/bin/make -- OK
Running make test for STEVEB/IPC-Shareable-1.13.tar.gz
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-base.t ................ skipped: Not on a valid CI platform...
t/02-create.t .............. skipped: Not on a legit CI platform...
t/04-key.t ................. skipped: Not on a legit CI platform...
t/05-sv.t .................. skipped: Not on a legit CI platform...
t/07-new.t ................. skipped: Not on a legit CI platform...
t/08-new_tied_obj.t ........ skipped: Not on a legit CI platform...
t/10-av.t .................. skipped: Not on a legit CI platform...
t/15-hv.t .................. skipped: Not on a legit CI platform...
t/17-attributes.t .......... skipped: Not on a legit CI platform...
t/20-ref.t ................. skipped: Not on a legit CI platform...
t/25-ipc.t ................. skipped: Not on a legit CI platform...
t/30-lock_operation.t ...... skipped: Not on a legit CI platform...
t/31-lock_semaphore.t ...... skipped: Not on a legit CI platform...
t/35-clean.t ............... skipped: Not on a legit CI platform...
t/36-ipcav.t ............... skipped: Not on a legit CI platform...
t/38-ipchv.t ............... skipped: Not on a legit CI platform...
t/40-ipcref.t .............. skipped: Not on a legit CI platform...
t/45-obj.t ................. skipped: Not on a legit CI platform...
t/50-ipcobj.t .............. skipped: Not on a legit CI platform...
t/55-lsync.t ............... skipped: Not on a legit CI platform...
t/60-tied.t ................ skipped: Not on a legit CI platform...
t/61-seg_sem.t ............. skipped: Not on a legit CI platform...
t/63-nested_segs_tidy.t .... skipped: Not on a legit CI platform...
t/64-nested_segs_untidy.t .. skipped: Not on a legit CI platform...
t/65-seg_size.t ............ skipped: Not on a legit CI platform...
t/66-size_exceeded.t ....... skipped: Not on a legit CI platform...
t/67-exhaust_shm_slots.t ... skipped: Not on a legit CI platform...
t/75-graceful.t ............ skipped: Not on a legit CI platform...
t/76-singleton.t ........... skipped: Not on a legit CI platform...
t/77-singleton_warn.t ...... skipped: Not on a legit CI platform...
t/78-singleton_class.t ..... skipped: Not on a legit CI platform...
t/80-exceptions.t .......... skipped: Not on a legit CI platform...
t/81-fork_dup_rand_keys.t .. skipped: Not on a legit CI platform...
t/82-sig_child_ignore.t .... skipped: Not on a legit CI platform...
t/83-clean_protected.t ..... skipped: Not on a legit CI platform...
t/90-pod_coverage.t ........ skipped: Author test: RELEASE_TESTING not set
t/91-pod_linkcheck.t ....... skipped: Author test: RELEASE_TESTING not set
t/92-pod.t ................. skipped: Author test: RELEASE_TESTING not set
t/93-manifest.t ............ skipped: Author test: RELEASE_TESTING not set
t/99-end.t ................. ok
All tests successful.
Files=40, Tests=1, 2 wallclock secs ( 0.09 usr 0.03 sys + 2.27 cusr 0.39 csys = 2.78 CPU)
Result: PASS
STEVEB/IPC-Shareable-1.13.tar.gz
/usr/bin/make test -- OK
Running make install for STEVEB/IPC-Shareable-1.13.tar.gz
Manifying 2 pod documents
Installing /usr/local/share/perl/5.30.0/IPC/Shareable.pm
Installing /usr/local/share/perl/5.30.0/IPC/ipc.pl
Installing /usr/local/share/perl/5.30.0/IPC/Shareable/SharedMem.pm
Installing /usr/local/man/man3/IPC::Shareable::SharedMem.3pm
Installing /usr/local/man/man3/IPC::Shareable.3pm
Appending installation info to /usr/local/lib/x86_64-linux-gnu/perl/5.30.0/perllocal.pod
STEVEB/IPC-Shareable-1.13.tar.gz
/usr/bin/make install -- OK
JSON is up to date (4.10).
--2023-12-16 09:45:08-- https://git.mork.no/wwan.git/plain/scripts/swi_setusbcomp.pl
Resolving git.mork.no (git.mork.no)... 65.108.154.246, 2a01:4f9:c010:a439::d
Connecting to git.mork.no (git.mork.no)|65.108.154.246|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 22365 (22K) [text/plain]
Saving to: ‘swi_setusbcomp.pl’
swi_setusbcomp.pl 100%[===================>] 21.84K --.-KB/s in 0.06s
2023-12-16 09:45:09 (360 KB/s) - ‘swi_setusbcomp.pl’ saved [22365/22365]
Waiting for modem to reboot...
---
Reseting modem...
Setting MBIM Mode for Modem
Interface bitmask: 0000100D (diag,nmea,modem,mbim)
---
Running Modem Mode Switch to usbcomp=8
Running in MBIM mode (driver=cdc_mbim)
MBIM OPEN succeeded
QMI msg '0x0021' returned status = 1
MBIM QMI support verified
supports 34 QMI subsystems:
0x00 (1.5) 'QMI_CTL' - Control service
0x01 (1.67) 'QMI_WDS' - Wireless data service
0x02 (1.14) 'QMI_DMS' - Device management service
0x03 (1.25) 'QMI_NAS' - Network access service
0x04 (1.6) 'QMI_QOS' - Quality of service, err, service
0x05 (1.10) 'QMI_WMS' - Wireless messaging service
0x07 (1.3) 'QMI_AUTH' - Authentication service
0x08 (1.2) 'QMI_AT' - AT command processor service
0x09 (2.1) 'QMI_VOICE' - Voice service
0x0a (2.24) 'QMI_CAT2' - Card application toolkit service (new)
0x0b (1.45) 'QMI_UIM' - UIM service
0x0c (1.4) 'QMI_PBM' - Phonebook service
0x0f (1.0) 'QMI_TEST' - Test service
0x10 (2.0) 'QMI_LOC' - Location service
0x11 (1.0) 'QMI_SAR' - Specific absorption rate service
0x17 (1.0) 'QMI_TS' - Thermal sensors service
0x18 (1.0) 'QMI_TMD' - Thermal mitigation device service
0x1a (1.16) 'QMI_WDA' - Wireless data administrative service
0x1d (1.1) 'QMI_CSVT' - Circuit switched videotelephony service
0x22 (1.0) 'QMI_COEX' - Coexistence service
0x24 (1.0) 'QMI_PDC' - Persistent device configuration service
0x29 (1.0) 'QMI_RFRPE' - RF radiated performance enhancement service
0x2a (1.0) 'QMI_DSD' - Data system determination service
0x2b (1.0) 'QMI_SSCTL' - Subsystem control service
0x2e (1.0) 'unknown' -
0x30 (1.0) 'unknown' -
0x31 (1.0) 'unknown' -
0x36 (1.0) 'unknown' -
0xe1 (1.0) 'QMI_RMS' - Remote management service
0xf0 (1.0) 'unknown' -
0xf3 (1.0) 'unknown' -
0xf5 (1.0) 'unknown' -
0xf6 (1.0) 'unknown' -
0xfc (1.0) 'unknown' -
QMI msg '0x0022' returned status = 1
Got QMI DMS client ID '3'
QMI msg '0x555b' returned status = 1
Current USB composition: 8
USB compositions:
0 - HIP DM NMEA AT MDM1 MDM2 MDM3 MS NOT SUPPORTED
1 - HIP DM NMEA AT MDM1 MS NOT SUPPORTED
2 - HIP DM NMEA AT NIC1 MS NOT SUPPORTED
3 - HIP DM NMEA AT MDM1 NIC1 MS NOT SUPPORTED
4 - HIP DM NMEA AT NIC1 NIC2 NIC3 MS NOT SUPPORTED
5 - HIP DM NMEA AT ECM1 MS NOT SUPPORTED
6 - DM NMEA AT QMI SUPPORTED
7 - DM NMEA AT RMNET1 RMNET2 RMNET3 NOT SUPPORTED
* 8 - DM NMEA AT MBIM SUPPORTED
9 - MBIM SUPPORTED
10 - NMEA MBIM NOT SUPPORTED
11 - DM MBIM NOT SUPPORTED
12 - DM NMEA MBIM NOT SUPPORTED
13 - Config1: comp6 Config2: comp8 NOT SUPPORTED
14 - Config1: comp6 Config2: comp9 NOT SUPPORTED
15 - Config1: comp6 Config2: comp10 NOT SUPPORTED
16 - Config1: comp6 Config2: comp11 NOT SUPPORTED
17 - Config1: comp6 Config2: comp12 NOT SUPPORTED
18 - Config1: comp7 Config2: comp8 NOT SUPPORTED
19 - Config1: comp7 Config2: comp9 NOT SUPPORTED
20 - Config1: comp7 Config2: comp10 NOT SUPPORTED
21 - Config1: comp7 Config2: comp11 NOT SUPPORTED
22 - Config1: comp7 Config2: comp12 NOT SUPPORTED
Current setting is already '8'
QMI msg '0x0023' returned status = 1
Waiting for modem to reboot...
---
Reseting modem...
AT
OK
AT!ENTERCND="A710"
OK
AT!USBCOMP=1,1,0000100D
OK
AT!RESET
OK
Waiting for modem to reboot...
Waiting for modem to reboot...
Waiting for modem to reboot...
Waiting for modem to reboot...
Waiting for modem to reboot...
---
Current modem settings:
AT
OK
ATE1
OK
AT!ENTERCND="A710"
OK
AT!IMPREF?
!IMPREF:
preferred fw version: 02.24.05.06
preferred carrier name: GENERIC
preferred config name: GENERIC_002.026_000
preferred subpri index: 000
current fw version: 02.38.00.00
current carrier name: GENERIC
current config name: GENERIC_002.026_000
current subpri index: 000
fw version mismatch
OK
AT!GOBIIMPREF?
!GOBIIMPREF:
preferred fw version: 02.24.05.06
preferred carrier name: GENERIC
preferred config name: GENERIC_002.026_000
preferred subpri index: 000
current fw version: 02.38.00.00
current carrier name: GENERIC
current config name: GENERIC_002.026_000
current subpri index: 000
fw version mismatch
OK
AT!USBSPEED?
SUPPORTED:Super-Speed
CURRENT :High-Speed
OK
AT!USBSPEED=?
!USBSPEED: <max_supported_speed>
<max_supported_speed>:
0 - High Speed
1 - Super Speed
OK
AT!USBCOMP?
Config Index: 1
Config Type: 1 (Generic)
Interface bitmask: 0000100D (diag,nmea,modem,mbim)
OK
AT!USBCOMP=?
!USBCOMP:
AT!USBCOMP=<Config Index>,<Config Type>,<Interface bitmask>
<Config Index> - configuration index to which the composition applies, should be 1
<Config Type> - 1:Generic, 2:USBIF-MBIM, 3:RNDIS
config type 2/3 should only be used for specific Sierra PIDs: 68B1, 9068
customized VID/PID should use config type 1
<Interface bitmask> - DIAG - 0x00000001,
NMEA - 0x00000004,
MODEM - 0x00000008,
RMNET0 - 0x00000100,
RMNET1 - 0x00000400,
MBIM - 0x00001000,
e.g.
10D - diag, nmea, modem, rmnet interfaces enabled
1009 - diag, modem, mbim interfaces enabled
The default configuration is:
at!usbcomp=1,1,10F
OK
AT!USBVID?
!USBVID:
413C
OK
AT!USBPID?
!USBPID:
APP : 81B6
BOOT: 81B5
OK
AT!USBPRODUCT?
DW5811e Snapdragon™ X7 LTE
OK
AT!PRIID?
PRI Part Number: 9906458
Revision: 001.003
Customer: Dell
Carrier PRI: None
OK
AT!SELRAT?
!SELRAT: 00, Automatic
OK
AT!BAND?
Index, Name, GW Band Mask L Band Mask TDS Band Mask
00, All bands, 0002000007C00000 00000100130818DF 0000000000000000
OK
AT!BAND=?
Index, Name, GW Band Mask L Band Mask TDS Band Mask
00, All bands 0002000007C00000 00000100130818DF 0000000000000000
01, Europe 3G 0002000000400000 0000000000000000 0000000000000000
02, North America 3G 0000000004800000 0000000000000000 0000000000000000
06, Europe 0002000000400000 00000000000800C5 0000000000000000
07, North America 0000000004800000 000000000300185A 0000000000000000
08, WCDMA ALL 0002000007C00000 0000000000000000 0000000000000000
09, LTE ALL 0000000000000000 00000100130818DF 0000000000000000
0000010000000000 - B41
0000000010000000 - B29
0000000002000000 - B26
0000000001000000 - B25
0000000000080000 - B20
0000000000001000 - B13
0000000000000800 - B12
0000000000000080 - B8
0000000000000040 - B7
0000000000000010 - B5
0000000000000008 - B4
0000000000000004 - B3
0000000000000002 - B2
0000000000000001 - B1
0002000000000000 - B8 (900)
0000000004000000 - B5 (850)
0000000002000000 - B4 (1700)
0000000001000000 - B3 (1700)
0000000000800000 - B2 (1900)
0000000000400000 - B1 (2100)
OK
AT!PCINFO?
State: Low Power Mode
LPM voters - Temp:0, Volt:0, User:0, W_DISABLE:0, IMSWITCH:1, BIOS:0, LWM2M:0, OMADM:0, FOTA:0
LPM persistence - None
OK
AT!PCOFFEN?
0
OK
AT!CUSTOM?
!CUSTOM:
GPSENABLE 0x04
GPSSEL 0x01
IPV6ENABLE 0x01
SIMLPM 0x01
USBSERIALENABLE 0x01
SINGLEAPNSWITCH 0x01
OK
AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID
FW 1 EMPTY 0 0 0
FW 2 EMPTY 0 0 0
FW 3 EMPTY 0 0 0
FW 4 EMPTY 0 0 0
Max FW images: 4
Active FW image is at slot 255
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID
PRI FF GOOD 0 0 0 002.082_000 02.38.00.00_GENERIC
Max PRI images: 50
OK
AT
OK
AT!IMAGE=0
OK
AT!IMAGE?
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID
FW 1 EMPTY 0 0 0
FW 2 EMPTY 0 0 0
FW 3 EMPTY 0 0 0
FW 4 EMPTY 0 0 0
Max FW images: 4
Active FW image is at slot 255
TYPE SLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID
Max PRI images: 50
OK
Waiting for modem to reboot...
Downloading https://source.sierrawireless.com/-/media/support_downloads/airprime/74xx/7455_04282022/swi9x30c_02.38.00.00_generic_002.082_000.zip
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 60.6M 100 60.6M 0 0 663k 0 0:01:33 0:01:33 --:--:-- 666k
Archive: SWI9X30C_02.38.00.00_GENERIC_002.082_000.zip
inflating: SWI9X30C_02.38.00.00.cwe
inflating: SWI9X30C_02.38.00.00_GENERIC_002.082_000.nvu
---
Flashing SWI9X30C_02.38.00.00.cwe onto Generic Sierra Modem...
reseter operation finished successfully
Waiting for modem in boothold mode...
Waiting for modem in boothold mode...
Waiting for modem in boothold mode...
Waiting for modem in boothold mode...
Waiting for modem in boothold mode...
Waiting for modem in boothold mode...
Waiting for modem in boothold mode...
Found 413c:81b5
downloading cwe image: SWI9X30C_02.38.00.00.cwe (64.3 MB)...
finalizing download... (may take more than one minute, be patient)
successfully downloaded in 57.66s (1.1 MB/s)
downloading cwe image: SWI9X30C_02.38.00.00_GENERIC_002.082_000.nvu (23.9 kB)...
finalizing download... (may take more than one minute, be patient)
successfully downloaded in 0.08s (306.1 kB/s)
rebooting in normal mode...
firmware update operation finished successfully
cat: /dev/ttyUSB2: No such file or directory
Done!
|
Beta Was this translation helpful? Give feedback.
Answered by
ThRabl
Jan 3, 2024
Replies: 1 comment
-
|
I got it working in the meantime. The modem is now working in combination with a OpenWRT Router. However it is only working in MBMI Mode, could not get QMI Mode working. |
Beta Was this translation helpful? Give feedback.
0 replies
Answer selected by
ThRabl
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I got it working in the meantime.
Solution was to to run the script with the line
[[ $flash_modem_firmware_trigger ]] && flash_modem_firmwarecommented out. It finished setting up the modem successfully including up-to-date firmware.The modem is now working in combination with a OpenWRT Router.
However it is only working in MBMI Mode, could not get QMI Mode working.