Skip to content
This repository has been archived by the owner on Feb 1, 2021. It is now read-only.

Latest commit

 

History

History
268 lines (192 loc) · 9.29 KB

README.md

File metadata and controls

268 lines (192 loc) · 9.29 KB
Raw

Google Container Engine provisioning of a Dask Distributed cluster

Historical Note: this repository is somewhat old and not actively maintained. For more general documentation on deploying Dask on Kubernetes or Cloud clusters we recommend referring to the Dask setup documentation

This repo hosts some sample configuration to set up Kubernetes containerized environments for interactive cluster computing in Python with Jupyter notebook Dask and other tools from the PyData and SciPy ecosystems.

The Kubernetes API is provided as a managed service by the following public cloud providers:

Alternatively it is possible to install and manage Kubernetes by yourself.

We will briefly describe usage assuming Google Container Engine (GKE).

The dask-gke image

The Dockerfile file in this repo can be used to build a docker image with all the necessary tools to run our cluster, in particular:

  • conda and pip to install additional tools and libraries,
  • jupyter for the notebook interface accessed from any web browser,
  • dask and its distributed scheduler,
  • psutil and bokeh (useful for the cluster monitoring web interface)
  • many convenient numerical libraries
  • interfaces to S3 and GCS medium-term storage solutions

This image will be used to run 3 types of services:

  • the jupyter notebook server, protected by password jupyter. This password is defined in conf/jupyter_notebook_config.py; to change it, you will need to rebuild this image and point the kubernetes definitions to the new version.
  • the dask-scheduler service,
  • one dask-worker per container in the compute cluster.

Setup with Google Container Engine

You will need to install the following:

  • gcloud for authentication and launching clusters
  • kubectl for interacting with the kubernetes driver.

Register on the Google Cloud Platform, setup a billing account and create a project with the Google Compute Engine API enabled.

Ensure that your client SDK is up to date:

$ gcloud components update

Install dask-gke CLI via:

$ python setup.py install

Usage

Default settings for the cluster are stored in defaults.yaml

The easiest way to customize the cluster to your own purposes is to make a copy of this file, edit it, and supply it on the command line. The settings used for a new cluster are a combination of the built-in settings, any new values in a supplied file, and command-line options

To launch with default values only (where NAME is the label for the cluster):

dask-gke create NAME

To launch with a provided file:

dask-gke create NAME settings.yaml

To launch with a single override parameter

dask-gke create -s jupyter.port=443 NAME

By default, the process will block until done, and then print details about the created cluster to the screen, including the addresses of the dask-scheduler, the jupyter notebook, and the Bokeh status monitor. This same information can be retrieved again with the info command. Most users will want to navigate to the notebook first, which can also be achieved by calling

dask-gke notebook NAME

and similarly, the status command opens the cluster status page, or lab brings up the new "jupyterlab" IDE.

From within the cluster, you can connect to the distributed scheduler by doing the following:

from dask.distributed import Client
c = Client('dask-scheduler:8786')

When you are done, delete the cluster with the following:

dask-gke delete NAME

Note that this asks for confirmation potentially multiple times - you might wish to prepend with yes | (bash syntax) for automatic confirmation.

Extras

dask-gke work by calling kubectl. For those who want finer control or to investigate the state of the cluster, kubectl commands can be entered on the command line as for any other Kubernetes cluster. Furthermore, the Kubernetes dashboard is available using

dask-gke dashboard NAME

(note that, unlike the other commands which open browser tabs, this command is blocking on the command line, since it needs to maintain a proxy connection.)

Resize cluster

The dask workers live within containers on Google virtual machines. To get more processing power and memory, you must both increase the number of machines and the number of containers.

To add machines to the cluster, you may do the following

dask-gke resize nodes NAME COUNT

(of course, the more machines, the higher the bill will be)

To add worker containers, you may do the following

dask-gke resize pods NAME COUNT

or resize both while keeping the workers:nodes ratio constant

dask-gke resize both NAME COUNT

(you give the new number of workers requested).

Note that if you allocate more resources than your cluster can handle, some pods will not start.

To see the state of the worker pods, use kubectl or the Kubernetes dashboard.

Node Autoscaling

Kubernetes can automatically add or remove nodes to your cluster if you create the cluster with autoscaling enabled. Nodes will be added if worker pods can't be scheduled on the existing cluster, and removed if nodes are going unused.

Note that autoscaling affects the number of machines in the cluster (and consequently the cost of the cluster!), not the number of Dask workers, and must be turned on when the cluster is created.

To enable autoscaling, change the appropriate line in defaults.yaml or run:

dask-gke create NAME -s cluster.autoscaling=True -s cluster.min_nodes=MIN -s cluster.max_nodes=MAX

Logs

we can get the logs of a specific pod with kubectl logs:

$ kubectl logs -f dask-scheduler-hebul
distributed.scheduler - INFO - Scheduler at:       10.115.249.189:8786
distributed.scheduler - INFO -      http at:       10.115.249.189:9786
distributed.scheduler - INFO -  Bokeh UI at:  http://10.115.249.189:8787/status/
distributed.core - INFO - Connection from 10.112.2.3:50873 to Scheduler
distributed.scheduler - INFO - Register 10.112.2.3:59918
distributed.scheduler - INFO - Starting worker compute stream, 10.112.2.3:59918
distributed.core - INFO - Connection from 10.112.0.6:55149 to Scheduler
distributed.scheduler - INFO - Register 10.112.0.6:55103
distributed.scheduler - INFO - Starting worker compute stream, 10.112.0.6:55103
bokeh.command.subcommands.serve - INFO - Check for unused sessions every 50 milliseconds
bokeh.command.subcommands.serve - INFO - Unused sessions last for 1 milliseconds
bokeh.command.subcommands.serve - INFO - Starting Bokeh server on port 8787 with applications at paths ['/status', '/tasks']
distributed.core - INFO - Connection from 10.112.1.1:59452 to Scheduler
distributed.core - INFO - Connection from 10.112.1.1:59453 to Scheduler
distributed.core - INFO - Connection from 10.112.1.4:48952 to Scheduler
distributed.scheduler - INFO - Register 10.112.1.4:54760
distributed.scheduler - INFO - Starting worker compute stream, 10.112.1.4:54760

Run commands

we can also execute arbitrary commands inside the running containers with kubectl exec, for instance to open an interactive shell session for debugging purposes:

$ kubectl exec -ti dask-scheduler-hebul bash
root@dscheduler-hebul:/work# ls -l examples/
total 56
-rw-r--r-- 1 basicuser root  1344 May 17 11:29 distributed_joblib_backend.py
-rw-r--r-- 1 basicuser root 33712 May 17 11:29 sklearn_parameter_search.ipynb
-rw-r--r-- 1 basicuser root 14407 May 17 11:29 sklearn_parameter_search_joblib.ipynb

where "dask-scheduler-hebul" is the specific pod name of the scheduler.

It is, of course, also possible to run shell commands directly in the Jupyter notebook, or to use python's subprocess with dask's Client.run to programmatically call commands on the worker containers.

Alternate docker image

Each type of pod in dask-gke currently is founded on the docker image mdurant/dask-gke:latest. The Dockerfile is included in this repo. Users may wish to alter particularly the conda/pip installations in the middle of the work-flow.

There are two ways to apply changes made to a dask cluster:

  • rebuild the docker image to the new specification, and post on dockerhub, changing the image: keys in the kubernetes .yaml files to point to it;
  • set up a google image registry and build new images within your compute cluster.

To create a new password for the jupyter interface, execute the following in locally, using a jupyter of similar version to the Dockerfile (currently 4.2)

In [1]: from notebook.auth import passwd
In [2]: passwd()
Enter password:
Verify password:
Out[2]: '...'

and place the created output string into config/jupyter_notebook_config.py before rebuildign the docker image.

History

The original work was completed by @ogrisel.