my-power-saver.sh

#!/bin/bash

###################################################################
#                                                                 #
# CODE MAP:                                                       #
#                                                                 #
# 0) Comments                                                     #
#                                                                 #
# 1) Preload and settings block of code (with start & end points) #
#                                                                 #
# 2) Functions block of code (with start & end points)            #
#                                                                 #
# 3) Oneshot block of code (with start & end points)              #
#                                                                 #
#    - On ac block of code (with start & end points)              #
#                                                                 #
#    - On battery block of code (with start & end points)         #
#                                                                 #
# 4) Daemon block of code (with start & end points)               #
#                                                                 #
#    - Pre-anywayshot block of code (with start & end points)     #
#                                                                 #
#    - On ac block of code (with start & end points)              #
#                                                                 #
#    - On battery block of code (with start & end points)         #
#                                                                 #
#    - Post-anywayshot block of code (with start & end points)    #
#                                                                 #
###################################################################

###################################################################################################################
#                                                                                                                 #
# NOTICE:                                                                                                         #
#                                                                                                                 #
# If you want to add (or change) something yours, you can easily do it:                                           #
#                                                                                                                 #
# 1) Add yours function (functions block of code)                                                                 #
#                                                                                                                 #
# 2) Add calls of yours function in needed block of code (oneshot or daemon (pre/ac/battery/post) block of code)  #
#                                                                                                                 #
# 3) Add settings for yours function if it needed (preload and settings block of code)                            #
#                                                                                                                 #
# 4) Add comments for your code (every block of code)                                                             #
#                                                                                                                 #
###################################################################################################################

##############################################
#                                            #
# Here is preload and settings block of code #
#                                            #
##############################################

################################################################################################
#                                                                                              #
# NOTICE:                                                                                      #
#                                                                                              #
# 0 - OFF | 1 - ON | auto - automatic value detection (experimental, not supported everywhere) #
#                                                                                              #
# [ auto ] - usually sets the maximum possible value                                           #
#                                                                                              #
# Column [ statements: 0/1/* ] - for a configurable parameter                                  #
#                                                                                              #
# Dependent settings are have indent                                                           #
#                                                                                              #
# You can use google translator to translate comments into your language                       #
#                                                                                              #
# You can use editor search to find needed things                                              #
#                                                                                              #
################################################################################################

# daemon settings (start) #

loop="1" # set loop to daemon; statements: 0/1 #

polling_time="600" # quiz frequency in seconds - you can change it on your own #

# daemon settings (end) #

# brightness settings (start) #

use_changing_brightness="1" # brigtness value change function; statements: 0/1  #

	oneshot_brightness="1" # use changing brightness once; statements: 0/1  #

	daemon_brightness="0" # use changing brightness always; statements: 0/1  #

	path_brightness="/sys/class/backlight/intel_backlight/brightness" # ATTENTION! You must check this item yourself in your system #

	ac_brightness="12421" # ATTENTION! You must check this item yourself in your system #

	battery_brightness="0" # ATTENTION! You must check this item yourself in your system #

# brightness settings (end) #

# tray indicator settings (start) #

use_gtrayicon="1" # use gtrayicon for create tray indicator; depends of gtrayicon package; statements: 0/1 #

	gtrayicon_ac_icon="/usr/share/icons/gnome/scalable/emotes/face-devilish-symbolic.svg"

	gtrayicon_battery_icon="/usr/share/icons/gnome/scalable/emotes/face-angel-symbolic.svg"

# tray indicator settings (end) #

# notification settings (start) #

use_notify_send="1" # use notification sending function; depends of notify-send (libnotify-bin or notify-osd) package; statements: 0/1 #

	use_notify_send_standalone="0" # send notification regardless; statements: 0/1 #

	use_notify_send_with_gtrayicon="1" # send notification; depends of gtrayicon; statements: 0/1 #

# notification settings (end) #

# kernel settings (start) #

use_changing_kernel_params="1" # kernel changing parameters function; statements: 0/1 #

	use_smt_power_saving="0" # ATTENTION! You must check this item yourself in your system; change smt power saving; statements: 0/1 #

	use_mc_power_saving="0" # ATTENTION! You must check this item yourself in your system; change mc power saving; statements: 0/1 #

# kernel settings (end) #

# custom battery life (cycle) extender settings (start) #

use_custom_battery_life_extender="1" # ATTENTION! You must check this item yourself in your system; battery life (cycle) extender funcion in BIOS if hardware support; depends of polling time; statements: 0/1 #

	battery_life_extender_path="/sys/devices/platform/samsung/battery_life_extender" # ATTENTION! You must check this item yourself in your system #

	battery_life_extender_enable_percentage="50" # enable battery life extender after that battery percentage; statements: number #

# custom battery life (cycle) extender settings (end) #

# fan speed settings (start) #

use_changing_fan="1" # ATTENTION! You must check this item yourself in your system; change fan speed function if your hardware support it; statements: 0/1 #

	fan_changing_path="/sys/devices/platform/samsung/performance_level" # ATTENTION! You must check this item yourself in your system #

	fan_ac_speed="overclock" # ATTENTION! You must check this item yourself in your system #

	fan_battery_speed="silent" # ATTENTION! You must check this item yourself in your system #

# fan speed settings (end) #

# powertop settings (start) #

use_powertop="1" # use powertop as module; depends of powertop package; statements: 0/1 #

# powertop settings (end) #

# modprobe settings (start) #

use_modprobe="1" # use modprobe as module to change devices statements; depends of modprobe (kmod) package; statements: 0/1 #

	use_changing_camera="1" # use change camera statements; statements: 0/1  #

# modprobe settings (end) #

# wireless interface settings (start) #

use_wireless_powersaving="1" # change wireless interface parameters; statements: 0/1 #

	wireless_interface="wlp5s0" # ATTENTION! You must check this item yourself in your system #

	# wireless interface settings using iw package; depends of iw package (start) #

	use_iw_pm="0" # ATTENTION! You must check this item yourself in your system; change wireless interface power management parameter; statements: 0/1 #

	use_iw_txpower="1" # use change wireless interface txpower; statements: 0/1 #

		iw_ac_txpower="16" # ATTENTION! You must check this item yourself in your system #

			iw_set_ac_txpower="auto" # ATTENTION! You must check this item yourself in your system #

		iw_battery_txpower="1" # ATTENTION! You must check this item yourself in your system #

			iw_set_battery_txpower="limit 100" # ATTENTION! You must check this item yourself in your system #

	# wireless interface settings using iw package; depends of iw package (end) #

	# wireless interface settings using iwconfig package; depends of iwconfig (wireless-tools) package (start) #

	use_iwconfig_pm="0" # ATTENTION! You must check this item yourself in your system; change wireless interface power management parameter; statements: 0/1 #

	use_iwconfig_txpower="1" # use change wireless interface txpower; statements: 0/1 #

		iwconfig_ac_txpower="16" # ATTENTION! You must check this item yourself in your system #

			iwconfig_set_ac_txpower="auto" # ATTENTION! You must check this item yourself in your system #

		iwconfig_battery_txpower="1" # ATTENTION! You must check this item yourself in your system #

			iwconfig_set_battery_txpower="1" # ATTENTION! You must check this item yourself in your system #

	# wireless interface settings using iwconfig package; depends of iwconfig (wireless-tools) package (end) #

# wireless interface settings (end) #

# rfkill settings (start) #

use_rfkill="1" # use rfkill package as module to change wireless interface statements; depends of rfkill package; statements: 0/1 #

	use_changing_wifi="1" # change wifi interface statements; statements: 0/1 #

		oneshot_wifi="1" # change wifi interface statements once; statements: 0/1 #

		daemon_wifi="0" # change wifi interface statements always; statements: 0/1 #

	use_changing_bluetooth="1" # change bluetooth interface statements; statements: 0/1 #

		oneshot_bluetooth="1" # change bluetooth interface statements once; statements: 0/1 #

		daemon_bluetooth="1" # change bluetooth interface statements always; statements: 0/1 #

# rfkill settings (end) #

# ipv6 settings (start) #

use_changing_ipv6="1" # change ipv6 statements; statements: 0/1 #

	use_sysctl="1" # change ipv6 statements using sysctl package; depends of sysctl (procps or procps-ng) package; statements: 0/1 #

# ipv6 settings (end) #

# scsi settings (start) #

use_changing_scsi="1" # change scsi statements function; statements: 0/1 #

	number_of_scsi_host="4" # ATTENTION! You must check this item yourself in your system #

	ac_scsi_host="max_performance" # ATTENTION! You must check this item yourself in your system #

	battery_scsi_host="min_power" # ATTENTION! You must check this item yourself in your system #

# scsi settings (end) #

# online cpu cores settings (start) #

use_changing_online_cores="1" # online cores statement change function, can enable or disable cores; statements: 0/1 #

	battery_number_of_online_cores="1" # enabled number of cores on battery; statements: 1/number/auto #

	ac_number_of_online_cores="auto" # enabled number of cores on ac; statements: 1/number/auto  #

# online cpu cores settings (end) #

# cpu governor settings (start) #

use_changing_governor="1" # cpu cores governor change function; statements: 0/1 #

	use_cpufreq="0" # change cpu cores governor using cpufreq-set as module; depends of cpufreq-set (cpufreutils) package; statements: 0/1 #

	number_of_cores="auto" # number of changeable cpu cores; statements: 0/number/auto #

	battery_governor="powersave" # ATTENTION! You must check this item yourself in your system #

	ac_governor="performance" # ATTENTION! You must check this item yourself in your system #

# cpu governor settings (end) #

# pcie settings (start) #

use_changing_pcie="1" # change pcie statement function; statements: 0/1 #

# pcie settings (end) #

# hdparm settings (start) #

use_hdparm="1" # change your hard disk power management parameters using hdparm; depends of hdparm package; statements: 0/1 #

	hard_disk="/dev/sda" # ATTENTION! You must check this item yourself in your system #

# hdparm settings (end) #

# cdrom hal polling settings (start) #

use_hal_polling="0" # ATTENTION! You must check this item yourself in your system; change cdrom polling function; statements: 0/1 #

	hal_polling_device="/dev/cdrom" # ATTENTION! You must check this item yourself in your system #

# cdrom hal polling settings (end) #

# systemd services settings (start) #

use_systemd="1" # parameter that provides the ability to control systemd processes; depends of systemd package; statements: 0/1 #

	use_laptop_mode_tools="1" # use laptop-mode-tools as module; depends of laptop-mode-tools package; statements: 0/1 #

		ac_laptop_mode="0" # statements: 0..5 #

		battery_laptop_mode="5" # statements: 0..5 #

	use_cpufreqd="1" # use cpufreqd as module; depends of cpufreqd package; statements: 0/1 #

	use_samsung_tools="1" # use samsung-tools as module; depends of samsung-tools package; statements: 0/1 #

		oneshot_samsung_tools="1" # use samsung-tools once; statements: 0/1 #

		daemon_samsung_tools="0" # use samsung-tools always; statements: 0/1 #

	use_autosuspend="0" # autosuspend function if your system not support it; depends of polling time; statements: 0/1 #

		path_battery_percentage="/sys/class/power_supply/BAT1/capacity" # ATTENTION! You must check this item yourself in your system #

		min_battery_percentage="5" # ATTENTION! You must check this item yourself in your system #

	stop_setvtrgb="1" # stop setvtrgb service using systemd if you have it; statements: 0/1 #

	stop_rclocal="1" # stop rc.local service using systemd if you have it; statements: 0/1 #

	stop_colord="1" # stop colord service using systemd if you have it; statements: 0/1 #

	stop_keyboardsetup="1" # stop keyboard-setup service using systemd if you have it; statements: 0/1 #

	stop_preload="1" # stop preload service using systemd; depends of preload package; statements: 0/1 #

	stop_avahidaemon="1" # stop avahi-daemon service using systemd if you have it; statements: 0/1 #

	stop_ntp="1" # stop ntp service using systemd if you have it; statements: 0/1 #

	disable_teamviewerd="1" # disable teamviewed service using systemd if you have it; statements: 0/1 #

# systemd services settings (end) #

########################################################
#                                                      #
# Here is end point preload and settings block of code #
#                                                      #
########################################################

###############################################
#                                             #
# Here is start point functions block of code #
#                                             #
###############################################

# function of skipping (start) #

function skip()

{

	sleep 0;

};

# function of skipping (end) #

# function of long time wait for polling (start) #

function longwait()

{

	sleep $polling_time;

};

# function of long time wait for polling (end) #

# function of suspend for daemon autosuspend function (start) #

function daemon.battery.suspend()

{

	sudo systemctl suspend;

};

# function of suspend for daemon autosuspend function (end) #

# function of oneshot changing brightness (start) #

function oneshot.change_brightness()

{

	if on_ac_power;

		then

			{

				if [ $use_changing_brightness = "1" ] && [ $oneshot_brightness = "1" ]

					then

						{

							if (( $(cat $path_brightness) < $ac_brightness ))

								then

									{

										echo $ac_brightness > $path_brightness;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_changing_brightness = "1" ] && [ $oneshot_brightness = "1" ]

					then

						{

							if (( $(cat $path_brightness) > $battery_brightness ))

								then

									{

										echo $battery_brightness > $path_brightness;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of oneshot changing brightness (stop) #

# function of oneshot changing wifi with rfkill (start) #

function oneshot.rfkill.change_wifi()

{

	if on_ac_power;

		then

			{

				if [ $use_rfkill = "1" ] && [ $use_changing_wifi = "1" ] && [ $oneshot_wifi = "1" ]

					then

						if (( $(rfkill list wifi | grep -c "yes") > "0" ))

							then

								{

									sudo rfkill unblock wifi;

								};

							else

								{

									skip;

								};

						fi;

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_rfkill = "1" ] && [ $use_changing_wifi = "1" ] && [ $oneshot_wifi = "1" ]

					then

						{

							if (( $(rfkill list wifi | grep -c "no") > "0" ))

								then

									{

										sudo rfkill block wifi;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of oneshot changing wifi with rfkill (end) #

# function of oneshot changing bluetooth with rfkill (start) #

function oneshot.rfkill.change_bluetooth()

{

	if on_ac_power;

		then

			{

				if [ $use_rfkill = "1" ] && [ $use_changing_bluetooth = "1" ] && [ $oneshot_bluetooth = "1" ]

					then

						{

							if (( $(rfkill list bluetooth | grep -c "yes") > "0" ))

								then

									{

										sudo rfkill unblock bluetooth;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_rfkill = "1" ] && [ $use_changing_bluetooth = "1" ] && [ $oneshot_bluetooth = "1" ]

					then

						{

							if (( $(rfkill list bluetooth | grep -c "no") > "0" ))

								then

									{

										sudo rfkill block bluetooth;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of oneshot changing bluetooth with rfkill (end) #

# function of oneshot starting samsung tools service with systemd (start) #

function oneshot.systemd.use_samsung_tools()

{

	if [ $use_systemd = "1" ] && [ $use_samsung_tools = "1" ] && [ $oneshot_samsung_tools = "1" ]

		then

			{

				if [[ $(systemctl status samsung-tools.service | grep -c "disabled") != "1" ]]

					then

						{

							sudo systemctl disable samsung-tools.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status samsung-tools.service | grep -c "inactive") = "1" ]]

					then

						{

							sudo systemctl start samsung-tools.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status samsung-tools.service | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl stop samsung-tools.service;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				skip;

			};

	fi;

};

# function of oneshot starting samsung tools service with systemd (end) #

# function of pre-anywayshot starting cpufreqd service with systemd (start) #

function pre_anywayshot.systemd.use_cpufreqd()

{

	if [ $use_systemd = "1" ] && [ $use_cpufreqd = "1" ]

		then

			{

				if [[ $(systemctl status cpufreqd.service | grep -c "disabled") != "1" ]]

					then

						{

							sudo systemctl disable cpufreqd.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status cpufreqd.service | grep -c "inactive") = "1" ]]

					then

						{

							sudo systemctl start cpufreqd.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status cpufreqd.service | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl stop cpufreqd.service;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				skip;

			};

	fi;

};

# function of pre-anywayshot starting cpufreqd service with systemd (end) #

# function of pre-anywayshot stopping rc-local service with systemd (start) #

function pre_anywayshot.systemd.stop_rc_local()

{

	if [ $use_systemd = "1" ] && [ $stop_rclocal = "1" ] && [ $(systemctl status rc-local.service | grep -c "inactive") != "1" ]

		then

			{

				sudo systemctl stop rc-local.service;

			};

		else

			{

				skip;

			};

	fi;

};

# function of pre-anywayshot stopping rc-local service with systemd (end) #

# function of pre-anywayshot stopping avahi-daemon service with systemd (start) #

function pre_anywayshot.systemd.stop_avahi_daemon()

{

	if [ $use_systemd = "1" ] && [ $stop_avahidaemon = "1" ] && [ $(systemctl status avahi-daemon.service | grep -c "inactive") != "1" ]

		then

			{

				sudo systemctl stop avahi-daemon.service;

			};

		else

			{

				skip;

			};

	fi;

	if [ $use_systemd = "1" ] && [ $stop_avahidaemon = "1" ] && [ $(systemctl status avahi-daemon.socket | grep -c "inactive") != "1" ]

		then

			{

				sudo systemctl stop avahi-daemon.socket;

			};

		else

			{

				skip;

			};

	fi;

};

# function of pre-anywayshot stopping avahi-daemon service with systemd (end) #

# function of pre-anywayshot stopping keyboard-setup service with systemd (start) #

function pre_anywayshot.systemd.stop_keyboard_setup()

{

	if [ $use_systemd = "1" ] && [ $stop_keyboardsetup = "1" ] && [ $(systemctl status keyboard-setup.service | grep -c "inactive") != "1" ]

		then

			{

				sudo systemctl stop keyboard-setup.service;

			};

		else

			{

				skip;

			};

	fi;

};

# function of pre-anywayshot stopping keyboard-setup service with systemd (end) #

# function of pre-anywayshot starting laptop-mode-tools service with systemd (start) #

function pre_anywayshot.systemd.use_laptop_mode_tools()

{

	if [ $use_systemd = "1" ] && [ $use_laptop_mode_tools = "1" ]

		then

			{

				if [[ $(systemctl status laptop-mode.timer | grep -c "disabled") != "1" ]]

					then

						{

							sudo systemctl disable laptop-mode.timer;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status laptop-mode.service | grep -c "disabled;") != "1" ]]

					then

						{

							sudo systemctl disable laptop-mode.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status lmt-poll.service | grep -c "disabled") != "1" ]]

					then

						{

							sudo systemctl disable lmt-poll.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status laptop-mode.timer | grep -c "inactive") = "1" ]]

					then

						{

							sudo systemctl start laptop-mode.timer;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status laptop-mode.service | grep -c "inactive") = "1" ]]

					then

						{

							sudo systemctl start laptop-mode.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status lmt-poll.service | grep -c "inactive") = "1" ]]

					then

						{

							sudo systemctl start lmt-poll.service;

						};

					else

						{

							skip;

						};

				fi;

				if on_ac_power;

					then

						{

							if (( $(cat "/proc/sys/vm/laptop_mode") != $ac_laptop_mode ))

								then

									{

										echo $ac_laptop_mode > "/proc/sys/vm/laptop_mode";

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							if (( $(cat "/proc/sys/vm/laptop_mode") != $battery_laptop_mode ))

								then

									{

										echo $battery_laptop_mode > "/proc/sys/vm/laptop_mode";

									};

								else

									{

										skip;

									};

							fi;

						};

				fi;

				if [[ $(systemctl status laptop-mode.timer | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl restart laptop-mode.timer;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status laptop-mode.service | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl restart laptop-mode.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status lmt-poll.service | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl restart lmt-poll.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status laptop-mode.service | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl reload laptop-mode.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status laptop-mode.timer | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl stop laptop-mode.timer;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status lmt-poll.service | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl stop lmt-poll.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status laptop-mode.service | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl stop laptop-mode.service;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				skip;

			};

	fi;

};

# function of pre-anywayshot starting laptop-mode-tools service with systemd (end) #

# function of pre-anywayshot disabling teamviewerd service with systemd (start) #

function pre_anywayshot.systemd.disable_teamviewerd()

{

	if [ $use_systemd = "1" ] && [ $disable_teamviewerd = "1" ]

		then

			{

				if [[ $(systemctl status teamviewerd.service | grep -c "disabled") != "1" ]]

					then

						{

							sudo systemctl disable teamviewerd.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status teamviewerd.service | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl stop teamviewerd.service;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				skip;

			};

	fi;

};

# function of pre-anywayshot disabling teamviewerd service with systemd (end) #

# function of post-anywayshot stopping setvtrgb service with systemd (start) #

function post_anywayshot.systemd.stop_setvtrgb()

{

	if [ $use_systemd = "1" ] && [ $stop_setvtrgb = "1" ] && [ $(systemctl status setvtrgb.service | grep -c "inactive") != "1" ]

		then

			{

				sudo systemctl stop setvtrgb.service;

			};

		else

			{

				skip;

			};

	fi;

};

# function of post-anywayshot stopping setvtrgb service with systemd (end) #

# function of post-anywayshot stopping colord service with systemd (start) #

function post_anywayshot.systemd.stop_colord()

{

	if [ $use_systemd = "1" ] && [ $stop_colord = "1" ] && [ $(systemctl status colord.service | grep -c "inactive") != "1" ]

		then

			{

				sudo systemctl stop colord.service;

			};

		else

			{

				skip;

			};

	fi;

};

# function of post-anywayshot stopping colord service with systemd (end) #

# function of post-anywayshot stopping preload service with systemd (start) #

function post_anywayshot.systemd.stop_preload()

{

	if [ $use_systemd = "1" ] && [ $stop_preload = "1" ] && [ $(systemctl status preload.service | grep -c "inactive") != "1" ]

		then

			{

				sudo systemctl stop preload.service;

			};

		else

			{

				skip;

			};

	fi;

};

# function of post-anywayshot stopping preload service with systemd (end) #

# function of post-anywayshot stopping ntp service with systemd (start) #

function post_anywayshot.systemd.stop_ntp()

{

	if [ $use_systemd = "1" ] && [ $stop_ntp = "1" ] && [ $(systemctl status ntp.service | grep -c "inactive") != "1" ]

		then

			{

				sudo systemctl stop ntp.service;

			};

		else

			{

				skip;

			};

	fi;
};

# function of post-anywayshot stopping ntp service with systemd (end) #

# function of daemon using make tray indicator with grayicon (start) #

function daemon.start_gtrayicon()

{

	if on_ac_power;

		then

			{

				if [ $use_gtrayicon = "1" ]

					then

						{

							if [[ $(pgrep -f -c "GLPS-Daemon: performance") != "0" ]] && [[ $(pgrep -f -c "GLPS-Daemon: powersave") = "0" ]]

								then

									{

										skip;

									};

								else

									{

										if [[ $(pgrep -f -c "GLPS-Daemon: powersave") != "0" ]]

											then

												{

													kill $(pgrep -f "GLPS-Daemon: powersave");

												};

											else

												{

													skip;

												};

										fi;

										if [[ $(pgrep -f -c "GLPS-Daemon: performance") != "0" ]]

											then

												{

													skip;

												};

											else

												{

													export DISPLAY=:0;

													export DISPLAY=:0.0;

													su $(who -q | grep -v =) -c 'DISPLAY=:0.0 gtrayicon --display=:0.0 --activate='' --deactivate='' --activate-icon='$gtrayicon_ac_icon' --deactivate-icon='$gtrayicon_ac_icon' --tooltip="GLPS-Daemon: performance" > /dev/null 2>&1 &';

													if [ $use_notify_send = "1" ] && [ $use_notify_send_with_gtrayicon = "1" ]

														then

															{

																export DISPLAY=:0;

																export DISPLAY=:0.0;

																su $(who -q | grep -v =) -c 'DISPLAY=:0.0 notify-send -i daemon "GPLS-Daemon" "Set performance settings"';

															};

														else

															{

																skip;

															};

													fi;

												};

										fi;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_gtrayicon = "1" ]

					then

						{

							if [[ $(pgrep -f -c "GLPS-Daemon: powersave") != "0" ]] && [[ $(pgrep -f -c "GLPS-Daemon: performance") = "0" ]]

								then

									{

										skip;

									};

								else

									{

										if [[ $(pgrep -f -c "GLPS-Daemon: performance") != "0" ]]

											then

												{

													kill $(pgrep -f "GLPS-Daemon: performance");

												};

											else

												{

													skip;

												};

										fi;

										if [[ $(pgrep -f -c "GLPS-Daemon: powersave") != "0" ]]

											then

												{

													skip;

												};

											else

												{

													export DISPLAY=:0;

													export DISPLAY=:0.0;

													su $(who -q | grep -v =) -c 'DISPLAY=:0.0 gtrayicon --display=:0.0 --activate='' --deactivate='' --activate-icon='$gtrayicon_battery_icon' --deactivate-icon='$gtrayicon_battery_icon' --tooltip="GLPS-Daemon: powersave" > /dev/null 2>&1 &';

													if [ $use_notify_send = "1" ] && [ $use_notify_send_with_gtrayicon = "1" ]

														then

															{

																export DISPLAY=:0;

																export DISPLAY=:0.0;

																su $(who -q | grep -v =) -c 'DISPLAY=:0.0 notify-send -i daemon "GPLS-Daemon" "Set powersave settings"';

															};

														else

															{

																skip;

															};

													fi;

												};

										fi;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon using make tray indicator with grayicon (stop) #

# function of daemon using send standalone notification with notify-send (start) #

function daemon.standalone.use_notify_send()

{

	if on_ac_power;

		then

			{

				if [ $use_notify_send = "1" ] && [ $use_notify_send_standalone = "1" ]

					then

						{

							export DISPLAY=:0;

							export DISPLAY=:0.0;

							su $(who -q | grep -v =) -c 'DISPLAY=:0.0 notify-send -i daemon "GPLS-Daemon" "Set performance settings"';

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_notify_send = "1" ] && [ $use_notify_send_standalone = "1" ]

					then

						{

							export DISPLAY=:0;

							export DISPLAY=:0.0;

							su $(who -q | grep -v =) -c 'DISPLAY=:0.0 notify-send -i daemon "GPLS-Daemon" "Set powersave settings"';

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon using send standalone notification with notify-send (end) #

# function of daemon changing laptop_mode setting as native (start) #

function daemon.change_laptop_mode()

{

	if on_ac_power;

		then

			{

				if [ $use_laptop_mode_tools = "1" ]

					then

						{

							if (( $(cat "/proc/sys/vm/laptop_mode") != $ac_laptop_mode ))

								then

									{

										echo $ac_laptop_mode > "/proc/sys/vm/laptop_mode";

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_laptop_mode_tools = "1" ]

					then

						{

							if (( $(cat "/proc/sys/vm/laptop_mode") != $battery_laptop_mode ))

								then

									{

										echo $battery_laptop_mode > "/proc/sys/vm/laptop_mode";

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing laptop_mode setting as native (end) #

# function of daemon on battery using powertop (start) #

function daemon.battery.use_powertop()

{

	if [ $use_powertop = "1" ]

		then

			{

				sudo powertop -q --auto-tune;

			};

		else

			{

				skip;

			};

	fi;

};

# function of daemon on battery using powertop (end) #

# function of daemon on battery using samsung-tools service with systemd (start) #

function daemon.battery.use_samsung_tools()

{

	if [ $use_samsung_tools = "1" ] && [ $daemon_samsung_tools = "1" ]

		then

			{

				if [[ $(systemctl status samsung-tools.service | grep -c "disabled") != "1" ]]

					then

						{

							sudo systemctl disable samsung-tools.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status samsung-tools.service | grep -c "inactive") = "1" ]]

					then

						{

							sudo systemctl start samsung-tools.service;

						};

					else

						{

							skip;

						};

				fi;

				if [[ $(systemctl status samsung-tools.service | grep -c "inactive") != "1" ]]

					then

						{

							sudo systemctl stop samsung-tools.service;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				skip;

			};

	fi;

};

# function of daemon on battery using samsung-tools service with systemd (end) #

# function of daemon changing kernel parameters as native (start) #

function daemon.kernel.change_parameters()

{

	if on_ac_power;

		then

			{

				if [ $use_changing_kernel_params = "1" ]

					then

						{

							if (( $(cat "/proc/sys/vm/dirty_ratio") != "10" ))

								then

									{

										echo "10" > "/proc/sys/vm/dirty_ratio";

									};

								else

									{

										skip;

									};

							fi;

							if (( $(cat "/proc/sys/vm/dirty_background_ratio") != "5" ))

								then

									{

										echo "5" > "/proc/sys/vm/dirty_background_ratio";

									};

								else

									{

										skip;

									};

							fi;

							if (( $(cat "/proc/sys/vm/dirty_expire_centisecs") != "1000" ))

								then

									{

										echo "1000" > "/proc/sys/vm/dirty_expire_centisecs";

									};

								else

									{

										skip;

									};

							fi;

							if (( $(cat "/proc/sys/vm/dirty_writeback_centisecs") != "1000" ))

								then

									{

										echo "1000" > "/proc/sys/vm/dirty_writeback_centisecs";

									};

								else

									{

										skip;

									};

							fi;

							if (( $(cat "/sys/module/snd_hda_intel/parameters/power_save") != "0" ))

								then

									{

										echo "0" > "/sys/module/snd_hda_intel/parameters/power_save";

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_changing_kernel_params = "1" ]

					then

						{

							if (( $(cat "/proc/sys/vm/dirty_ratio") != "90" ))

								then

									{

										echo "90" > "/proc/sys/vm/dirty_ratio";

									};

								else

									{

										skip;

									};

							fi;

							if (( $(cat "/proc/sys/vm/dirty_background_ratio") != "1" ))

								then

									{

										echo "1" > "/proc/sys/vm/dirty_background_ratio";

									};

								else

									{

										skip;

									};

							fi;

							if (( $(cat "/proc/sys/vm/dirty_expire_centisecs") != "60000" ))

								then

									{

										echo "60000" > "/proc/sys/vm/dirty_expire_centisecs";

									};

								else

									{

										skip;

									};

							fi;

							if (( $(cat "/proc/sys/vm/dirty_writeback_centisecs") != "60000" ))

								then

									{

										echo "60000" > "/proc/sys/vm/dirty_writeback_centisecs";

									};

								else

									{

										skip;

									};

							fi;

							if (( $(cat "/sys/module/snd_hda_intel/parameters/power_save") != "1" ))

								then

									{

										echo "1" > "/sys/module/snd_hda_intel/parameters/power_save";

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing kernel parameters as native (end) #

# function of daemon changing brigntness as native (start) #

function daemon.change_brightness()

{

	if on_ac_power;

		then

			{

				if [ $use_changing_brightness = "1" ] && [ $daemon_brightness = "1" ]

					then

						{

							if (( $(cat $path_brightness) < $ac_brightness ))

								then

									{

										echo $ac_brightness > $path_brightness;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_changing_brightness = "1" ] && [ $daemon_brightness = "1" ]

					then

						if (( $(cat $path_brightness) > $battery_brightness ))

							then

								{

									echo $battery_brightness > $path_brightness;

								};

							else

								{

									skip;

								};

						fi;

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing brigntness as native (end) #

# function of daemon changing fan speed as native (start) #

function daemon.change_fan_speed()

{

	if on_ac_power;

		then

			{

				if [[ $use_changing_fan = "1" ]]

					then

						{

							if [[ $(cat $fan_changing_path) != $fan_ac_speed ]]

								then

									{

										echo $fan_ac_speed > $fan_changing_path;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [[ $use_changing_fan = "1" ]]

					then

						{

							if [[ $(cat $fan_changing_path) != $fan_battery_speed ]]

								then

									{

										echo $fan_battery_speed > $fan_changing_path;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing fan speed as native (end) #

# function of daemon changing camera statement with modprobe (start) #

function daemon.modprobe.change_camera()

{

	if on_ac_power;

		then

			{

				if [ $use_modprobe = "1" ]

					then

						{

							if [ $use_changing_camera = "1" ] && [ $(ls "/dev/" | grep -c "video") = "0" ]

								then

									{

										sudo modprobe uvcvideo;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_modprobe = "1" ]

					then

						{

							if [ $use_changing_camera = "1" ] && [ $(ls "/dev/" | grep -c "video") != "0" ]

								then

									{

										sudo modprobe -r uvcvideo;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing camera statement with modprobe (end) #

# function of daemon changing mc power savings as native (start) #

function daemon.change_mc_power_savings()

{

	if on_ac_power;

		then

			{

				if [ $use_mc_power_saving = "1" ]

					then

						{

							if [[ $(cat "/sys/devices/system/cpu/sched_mc_power_savings") != "0" ]]

								then

									{

										echo "0" > "/sys/devices/system/cpu/sched_mc_power_savings";

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_mc_power_saving = "1" ]

					then

						{

							if [[ $(cat "/sys/devices/system/cpu/sched_mc_power_savings") != "1" ]]

								then

									{

										echo "1" > "/sys/devices/system/cpu/sched_mc_power_savings";

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing mc power savings as native (end) #

# function of daemon changing sched smt power savings as native (start) #

function daemon.change_sched_smt_power_savings()

{

	if on_ac_power;

		then

			{

				if [ $use_smt_power_saving = "1" ]

					then

						{

							if [[ $(cat "/sys/devices/system/cpu/sched_smt_power_savings") != "0" ]]

								then

									{

										echo "0" > "/sys/devices/system/cpu/sched_smt_power_savings";

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_smt_power_saving = "1" ]

					then

						{

							if [[ $(cat "/sys/devices/system/cpu/sched_smt_power_savings") != "1" ]]

								then

									{

										echo "1" > "/sys/devices/system/cpu/sched_smt_power_savings";

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing sched smt power savings as native (end) #

# function of daemon changing wifi parameters with iw (start) #

function daemon.iw.change_wifi_parameters()

{

	if on_ac_power;

		then

			{

				if [ $use_wireless_powersaving = "1" ]

					then

						{

							if [ $use_iw_pm = "1" ]

								then

									{

										if (( $(iw dev $wireless_interface get power_save | grep -c "off") != "1" ))

											then

												{

													sudo iw dev $wireless_interface set power_save off;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

							if [ $use_iw_txpower = "1" ] && (( $(sudo iwlist $wireless_interface txpower | grep -c "Tx-Power:off") != "1" ))

								then

									{

										if (( $(sudo iwlist $wireless_interface txpower | grep -c "Tx-Power=$iw_ac_txpower") != "1" ))

											then

												{

													sudo iw dev $wireless_interface set txpower $iw_set_ac_txpower;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_wireless_powersaving = "1" ]

					then

						{

							if [ $use_iw_pm = "1" ]

								then

									{

										if (( $(iw dev $wireless_interface get power_save | grep -c "on") != "1" ))

											then

												{

													sudo iw dev $wireless_interface set power_save on;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

							if [ $use_iw_txpower = "1" ] && (( $(sudo iwlist $wireless_interface txpower | grep -c "Tx-Power:off") != "1" ))

								then

									{

										if (( $(sudo iwlist $wireless_interface txpower | grep -c "Tx-Power=$iw_battery_txpower") != "1" ))

											then

												{

													sudo iw dev $wireless_interface set txpower $iw_set_battery_txpower;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing wifi parameters with iw (end) #

# function of daemon changing wifi parameters with iwconfig (start) #

function daemon.iwconfig.change_wifi_parameters()

{

	if on_ac_power;

		then

			{

				if [ $use_wireless_powersaving = "1" ]

					then

						{

							if [ $use_iwconfig_pm = "1" ]

								then

									{

										if (( $(iwconfig $wireless_interface | grep -c "Power Management:off") != "1" ))

											then

												{

													sudo iwconfig $wireless_interface power off;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

							if [ $use_iwconfig_txpower = "1" ] && (( $(sudo iwconfig $wireless_interface | grep -c "Tx-Power=off") != "1" ))

								then

									{

										if (( $(sudo iwconfig $wireless_interface | grep -c "Tx-Power=$iwconfig_ac_txpower") != "1" ))

											then

												{

													sudo iwconfig $wireless_interface txpower $iwconfig_set_ac_txpower;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_wireless_powersaving = "1" ]

					then

						{

							if [ $use_iwconfig_pm = "1" ]

								then

									{

										if (( $(iwconfig $wireless_interface | grep -c "Power Management:on") != "1" ))

											then

												{

													sudo iwconfig $wireless_interface power on;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

							if [ $use_iwconfig_txpower = "1" ] && (( $(sudo iwconfig $wireless_interface | grep -c "Tx-Power=off") != "1" ))

								then

									{

										if (( $(sudo iwconfig $wireless_interface | grep -c "Tx-Power=$iwconfig_battery_txpower") != "1" ))

											then

												{

													sudo iwconfig $wireless_interface txpower $iwconfig_set_battery_txpower;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing wifi parameters with iwconfig (end) #

# function of daemon changing ipv6 statement (start) #

function daemon.change_ipv6()

{

	if on_ac_power;

		then

			{

				if [ $use_changing_ipv6 = "1" ]

					then

						{

							if (( $(cat "/proc/sys/net/ipv6/conf/all/disable_ipv6") != "0" ))

								then

									{

										echo "0" > "/proc/sys/net/ipv6/conf/all/disable_ipv6";

									};

								else

									{

										skip;

									};

							fi;

							if [ $use_sysctl = "1" ]

								then

									{

										if (( $(sysctl net.ipv6.conf.all.disable_ipv6 | grep -c "1") != "0" ))

											then

												{

													sudo sysctl -w net.ipv6.conf.all.disable_ipv6=0;

												};

											else

												{

													skip;

												};

										fi;

										if (( $(sysctl net.ipv6.conf.default.disable_ipv6 | grep -c "1") != "0" ))

											then

												{

													sudo sysctl -w net.ipv6.conf.default.disable_ipv6=0;

												};

											else

												{

													skip;

												};

										fi;

										if (( $(sysctl net.ipv6.conf.lo.disable_ipv6 | grep -c "1") != "0" ))

											then

												{

													sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=0;

												};

											else

												{

													skip;

												};

										fi;

										if (( $(sysctl net.ipv6.conf.$wireless_interface.disable_ipv6 | grep -c "1") != "0" ))

											then

												{

													sudo sysctl -w net.ipv6.conf.$wireless_interface.disable_ipv6=0;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_changing_ipv6 = "1" ]

					then

						{

							if (( $(cat "/proc/sys/net/ipv6/conf/all/disable_ipv6") != "1" ))

								then

									{

										echo "1" > "/proc/sys/net/ipv6/conf/all/disable_ipv6";

									};

								else

									{

										skip;

									};

							fi;

							if [ $use_sysctl = "1" ]

								then

									{

										if (( $(sysctl net.ipv6.conf.all.disable_ipv6 | grep -c "1") != "1" ))

											then

												{

													sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1;

												};

											else

												{

													skip;

												};

										fi;

										if (( $(sysctl net.ipv6.conf.default.disable_ipv6 | grep -c "1") != "1" ))

											then

												{

													sudo sysctl -w net.ipv6.conf.default.disable_ipv6=1;

												};

											else

												{

													skip;

												};

										fi;

										if (( $(sysctl net.ipv6.conf.lo.disable_ipv6 | grep -c "1") != "1" ))

											then

												{

													sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=1;

												};

											else

												{

													skip;

												};

										fi;

										if (( $(sysctl net.ipv6.conf.$wireless_interface.disable_ipv6 | grep -c "1") != "1" ))

											then

												{

													sudo sysctl -w net.ipv6.conf.$wireless_interface.disable_ipv6=1;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing ipv6 statement (end) #

# function of daemon changing scsi hosts as native (start) #

function daemon.change_scsi_hosts()

{

	if on_ac_power;

		then

			{

				if [ $use_changing_scsi = "1" ]

					then

						{

							for (( s = 0; s < $number_of_scsi_host; s++ ))

							do

								{

									if [ $(cat "/sys/class/scsi_host/host$s/link_power_management_policy") != $ac_scsi_host ]

										then

											{

												echo $ac_scsi_host > "/sys/class/scsi_host/host$s/link_power_management_policy";

											};

										else

											{

												skip;

											};

									fi;

								};

							done;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_changing_scsi = "1" ]

					then

						{

							for (( s = 0; s < $number_of_scsi_host; s++ ))

							do

								{

									if [ $(cat "/sys/class/scsi_host/host$s/link_power_management_policy") != $battery_scsi_host ]

										then

											{

												echo $battery_scsi_host > "/sys/class/scsi_host/host$s/link_power_management_policy";

											};

										else

											{

												skip;

											};

									fi;

								};

							done;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# function of daemon changing scsi hosts as native (end) #

# function of daemon changing number of online cpu cores as native (start) #

total_number_of_cores="auto" # function's variable - do not change #

current_total_number_of_cores="auto" # function's variable - do not change #

function daemon.change_number_online_cores()

{

	if on_ac_power;

		then

			if [ $use_changing_online_cores = "1" ]

				then

					if [ $total_number_of_cores = "auto" ]

						then

							if [ $current_total_number_of_cores != $(nproc --all) ]

								then

									current_total_number_of_cores=$(nproc --all)

								else

									skip

							fi

						else

							if [ $current_total_number_of_cores != $total_number_of_cores ]

								then

									current_total_number_of_cores=$total_number_of_cores

								else

									skip

							fi

					fi

					if [ $ac_number_of_online_cores = "auto" ]

						then

							if [ $ac_number_of_online_cores != $current_total_number_of_cores ]

								then

									ac_number_of_online_cores=$current_total_number_of_cores

								else

									skip

							fi

							for (( c = 1; c < $ac_number_of_online_cores; c++ ))

							do

								if [ $(cat "/sys/devices/system/cpu/cpu$c/online") != "1" ]

									then

										echo "1" > "/sys/devices/system/cpu/cpu$c/online"

									else

										skip

								fi

							done

							for (( c = $ac_number_of_online_cores; c < $current_total_number_of_cores; c++ ))

							do

								if [ $(cat "/sys/devices/system/cpu/cpu$c/online") != "0" ]

									then

										echo "0" > "/sys/devices/system/cpu/cpu$c/online"

									else

										skip

								fi

							done

						else

							for (( c = 1; c < $ac_number_of_online_cores; c++ ))

							do

								if [ $(cat "/sys/devices/system/cpu/cpu$c/online") != "1" ]

									then

										echo "1" > "/sys/devices/system/cpu/cpu$c/online"

									else

										skip

								fi

							done

							for (( c = $ac_number_of_online_cores; c < $current_total_number_of_cores; c++ ))

							do

								if [ $(cat "/sys/devices/system/cpu/cpu$c/online") != "0" ]

									then

										echo "0" > "/sys/devices/system/cpu/cpu$c/online"

									else

										skip

								fi

							done

					fi

				else

					skip

			fi

		else

			if [ $use_changing_online_cores = "1" ]

				then

					if [ $total_number_of_cores = "auto" ]

						then

							if [ $current_total_number_of_cores != $(nproc --all) ]

								then

									current_total_number_of_cores=$(nproc --all)

								else

									skip

							fi

						else

							if [ $current_total_number_of_cores != $total_number_of_cores ]

								then

									current_total_number_of_cores=$total_number_of_cores

								else

									skip

							fi

					fi

					if [ $battery_number_of_online_cores = "auto" ]

						then

							if [ $battery_number_of_online_cores != $current_total_number_of_cores ]

								then

									battery_number_of_online_cores=$current_total_number_of_cores

								else

									skip

							fi

							for (( c = 1; c < $battery_number_of_online_cores; c++ ))

							do

								if [ $(cat "/sys/devices/system/cpu/cpu$c/online") != "1" ]

									then

										echo "1" > "/sys/devices/system/cpu/cpu$c/online"

									else

										skip

								fi

							done

							for (( c = $battery_number_of_online_cores; c < $current_total_number_of_cores; c++ ))

							do

								if [ $(cat "/sys/devices/system/cpu/cpu$c/online") != "0" ]

									then

										echo "0" > "/sys/devices/system/cpu/cpu$c/online"

									else

										skip

								fi

							done

						else

							for (( c = 1; c < $battery_number_of_online_cores; c++ ))

							do

								if [ $(cat "/sys/devices/system/cpu/cpu$c/online") != "1" ]

									then

										echo "1" > "/sys/devices/system/cpu/cpu$c/online"

									else

										skip

								fi

							done

							for (( c = $battery_number_of_online_cores; c < $current_total_number_of_cores; c++ ))

							do

								if [ $(cat "/sys/devices/system/cpu/cpu$c/online") != "0" ]

									then

										echo "0" > "/sys/devices/system/cpu/cpu$c/online"

									else

										skip

								fi

							done

					fi

				else

					skip

			fi

	fi

};

# function of daemon changing number of online cpu cores as native (end) #

# function of daemon changing cpu cores governor as native (start) #

current_number_of_cores="auto" # function's variable - do not change #

function daemon.change_cpu_cores_governor()

{

	if on_ac_power;

		then

			if [ $use_changing_governor = "1" ]

				then

					if [ $number_of_cores = "auto" ]

						then

							if [ $current_number_of_cores != $(cat "/proc/cpuinfo" | grep -c "processor") ]

								then

									current_number_of_cores=$(cat "/proc/cpuinfo" | grep -c "processor")

								else

									skip

							fi

						else

							if [ $current_number_of_cores != $number_of_cores ]

								then

									current_number_of_cores=$number_of_cores

								else

									skip

							fi

					fi

					for (( c = 0; c < $current_number_of_cores; c++ ))

					do

						if [ $(cat "/sys/devices/system/cpu/cpu$c/cpufreq/scaling_governor") != $ac_governor ]

							then

								echo $ac_governor > "/sys/devices/system/cpu/cpu$c/cpufreq/scaling_governor"

							else

								skip

						fi

					done

				else

					skip

			fi

		else

			if [ $use_changing_governor = "1" ]

				then

					if [ $number_of_cores = "auto" ]

						then

							if [ $current_number_of_cores != $(cat "/proc/cpuinfo" | grep -c "processor") ]

								then

									current_number_of_cores=$(cat "/proc/cpuinfo" | grep -c "processor")

								else

									skip

							fi

						else

							if [ $current_number_of_cores != $number_of_cores ]

								then

									current_number_of_cores=$number_of_cores

								else

									skip

							fi

					fi

					for (( c = 0; c < $current_number_of_cores; c++ ))

					do

						if [ $(cat "/sys/devices/system/cpu/cpu$c/cpufreq/scaling_governor") != $battery_governor ]

							then

								echo $battery_governor > "/sys/devices/system/cpu/cpu$c/cpufreq/scaling_governor"

							else

								skip

						fi

					done

				else

					skip

			fi

	fi

};

# function of daemon changing cpu cores governor as native (end) #

# function of daemon changing cpu cores governor with cpufreq (start) #

function daemon.cpufreq.change_cpu_cores_governor()

{

	if on_ac_power;

		then

			if [ $use_changing_governor = "1" ] && [ $use_cpufreq = "1" ]

				then

					for (( c = 0; c < $current_number_of_cores; c++ ))

					do

						if [ $(cat "/sys/devices/system/cpu/cpu$c/cpufreq/scaling_governor") != $ac_governor ]

							then

								sudo cpufreq-set -c $c -g $ac_governor

							else

								skip

						fi

					done

				else

					skip

			fi

		else

			if [ $use_changing_governor = "1" ] && [ $use_cpufreq = "1" ]

				then

					for (( c = 0; c < $current_number_of_cores; c++ ))

					do

						if [ $(cat "/sys/devices/system/cpu/cpu$c/cpufreq/scaling_governor") != $battery_governor ]

							then

								sudo cpufreq-set -c $c -g $battery_governor

							else

								skip

						fi

					done

				else

					skip

			fi

	fi

};

# function of daemon changing cpu cores governor with cpufreq (end) #

# function of daemon changing pcie aspm parameters as native (start) #

function daemon.change_pcie_aspm()

{

	if on_ac_power;

		then

			if [ $use_changing_pcie = "1" ]

				then

					if (( $(cat "/sys/module/pcie_aspm/parameters/policy" | grep -c "performance") != "1" ))

						then

							echo "performance" > "/sys/module/pcie_aspm/parameters/policy"

						else

							skip

					fi

				else

					skip

			fi

		else

			if [ $use_changing_pcie = "1" ]

				then

					if (( $(cat "/sys/module/pcie_aspm/parameters/policy" | grep -c "powersave") != "1" ))

						then

							echo "powersave" > "/sys/module/pcie_aspm/parameters/policy"

						else

							skip

					fi

				else

					skip

			fi

	fi

};

# function of daemon changing pcie aspm parameters as native (end) #

# function of daemon changing hal polling statement as experimental native (start) #

function daemon.change_hal_polling()

{

	if on_ac_power;

		then

			if [ $use_hal_polling = "1" ]

				then

					sudo hal-disable-polling --enable-polling --device $hal_polling_device

				else

					skip

			fi

		else

			if [ $use_hal_polling = "1" ]

				then

					sudo hal-disable-polling --device $hal_polling_device

				else

					skip

			fi

	fi

};

# function of daemon changing hal polling statement as experimental native (end) #

# function of daemon changing wifi with rfkill (start) #

function daemon.rfkill.change_wifi()

{

	if on_ac_power;

		then

			if [ $use_rfkill = "1" ] && [ $use_changing_wifi = "1" ] && [ $daemon_wifi = "1" ]

				then

					if (( $(rfkill list wifi | grep -c "yes") > "0" ))

						then

							sudo rfkill unblock wifi

						else

							skip

					fi

				else

					skip

			fi

		else

			if [ $use_rfkill = "1" ] && [ $use_changing_wifi = "1" ] && [ $daemon_wifi = "1" ]

				then

					if (( $(rfkill list wifi | grep -c "no") > "0" ))

						then

							sudo rfkill block wifi

						else

							skip

					fi

				else

					skip

			fi

	fi

};

# function of daemon changing wifi with rfkill (end) #

# function of daemon changing bluetooth with rfkill (start) #

function daemon.rfkill.change_bluetooth()

{

	if on_ac_power;

		then

			if [ $use_rfkill = "1" ] && [ $use_changing_bluetooth = "1" ] && [ $daemon_bluetooth = "1" ]

				then

					if (( $(rfkill list bluetooth | grep -c "yes") > "0" ))

						then

							sudo rfkill unblock bluetooth

						else

							skip

					fi

				else

					skip

			fi

		else

			if [ $use_rfkill = "1" ] && [ $use_changing_bluetooth = "1" ] && [ $daemon_bluetooth = "1" ]

				then

					if (( $(rfkill list bluetooth | grep -c "no") > "0" ))

						then

							sudo rfkill block bluetooth

						else

							skip

					fi

				else

					skip

			fi

	fi

};

# function of daemon changing bluetooth with rfkill (end) #

# function of daemon changing power saving statements of hard disk with hdparm (start) #

function daemon.hdparm.change_power_saving()

{

	if on_ac_power;

		then

			if [ $use_hdparm = "1" ]

				then

					if (( $(sudo hdparm -B $hard_disk | grep -c "= off") != "1" ))

						then

							sudo hdparm -B 255 $hard_disk

						else

							skip

					fi

					if (( $(sudo hdparm -M $hard_disk | grep -c "= 254") != "1" ))

						then

							sudo hdparm -M 254 $hard_disk

						else

							skip

					fi

					if (( $(sudo hdparm -W $hard_disk | grep -c "on") != "1" ))

						then

							sudo hdparm -W 1 $hard_disk

						else

							skip

					fi

					if (( $(sudo hdparm -C $hard_disk | grep -c "active/idle") != "1" )) || (( $(sudo hdparm -C $hard_disk | grep -c "standby") != "1" ))

						then

							sudo hdparm -S 0 $hard_disk

						else

							skip

					fi

				else

					skip

			fi

		else

			if [ $use_hdparm = "1" ]

				then

					if (( $(sudo hdparm -B $hard_disk | grep -c "= 1") != "1" ))

						then

							sudo hdparm -B 1 $hard_disk

						else

							skip

					fi

					if (( $(sudo hdparm -M $hard_disk | grep -c "= 128") != "1" ))

						then

							sudo hdparm -M 128 $hard_disk

						else

							skip

					fi

					if (( $(sudo hdparm -W $hard_disk | grep -c "off") != "1" ))

						then

							sudo hdparm -W 0 $hard_disk

						else

							skip

					fi

					if (( $(sudo hdparm -C $hard_disk | grep -c "standby") != "1" ))

						then

							sudo hdparm -S 1 $hard_disk

						else

							skip

					fi

				else

					skip

			fi

	fi

};

# function of daemon changing power saving statements of hard disk with hdparm (end) #

# custom battery life (cycle) extender function (start) #

function daemon.custom_battery_life_extender()

{

	if on_ac_power;

		then

			{

				if [ $use_custom_battery_life_extender = "1" ]

					then

						{

							if (( $(cat $path_battery_percentage) >= $battery_life_extender_enable_percentage ))

								then

									{

										if [ $(cat $battery_life_extender_path) != "1" ]

											then

												{

													echo "1" > $battery_life_extender_path;

												};

											else

												{

													skip;

												};

										fi;

									};

								else

									{

										if [ $(cat $battery_life_extender_path) != "0" ]

											then

												{

													echo "0" > $battery_life_extender_path;

												};

											else

												{

													skip;

												};

										fi;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

		else

			{

				if [ $use_custom_battery_life_extender = "1" ]

					then

						{

							if [ $(cat $battery_life_extender_path) != "0" ]

								then

									{

										echo "0" > $battery_life_extender_path;

									};

								else

									{

										skip;

									};

							fi;

						};

					else

						{

							skip;

						};

				fi;

			};

	fi;

};

# custom battery life (cycle) extender function (end) #

#############################################
#                                           #
# Here is end point functions block of code #
#                                           #
#############################################

#############################################
#                                           #
# Here is start point oneshot block of code #
#                                           #
#############################################

function main.oneshot()

{

	if on_ac_power;

		then

			##############################################
			#                                            #
			# Here is start point block of code if on AC #
			#                                            #
			##############################################

			{

				oneshot.change_brightness; # oneshot change ac brightness as native #

				oneshot.rfkill.change_wifi; # oneshot change ac wifi interface with rfkill #

				oneshot.rfkill.change_bluetooth; # oneshot change ac bluetooth interface with rfkill #

			};

			############################################
			#                                          #
			# Here is end point block of code if on AC #
			#                                          #
			############################################

		else

			###################################################
			#                                                 #
			# Here is start point block of code if on Battery #
			#                                                 #
			###################################################

			{

				oneshot.change_brightness; # oneshot change battery brightness as native #

				oneshot.rfkill.change_wifi; # oneshot change battery wifi interface with rfkill #

				oneshot.rfkill.change_bluetooth; # oneshot change battery bluetooth interface with rfkill #

				oneshot.systemd.use_samsung_tools; # oneshot battery use samsung tools service with systemd #

			};

			#################################################
			#                                               #
			# Here is end point block of code if on Battery #
			#                                               #
			#################################################

	fi;

};

###########################################
#                                         #
# Here is end point oneshot block of code #
#                                         #
###########################################

#################################
#                               #
# Here is start point of daemon #
#                               #
#################################

function main.daemon()

{

	while [ $loop = "1" ]

	do

		{

			#######################################################
			#                                                     #
			# Here is start point of pre-anywayshot block of code #
			#                                                     #
			#######################################################

			{

				pre_anywayshot.systemd.use_cpufreqd; # pre-anywayshot use cpufreqd service with systemd #

				pre_anywayshot.systemd.stop_rc_local; # pre-anywayshot stop rc-local service with systemd #

				pre_anywayshot.systemd.stop_avahi_daemon; # pre-anywayshot stop avahi-daemon service with systemd #

				pre_anywayshot.systemd.stop_keyboard_setup; # pre-anywayshot stop keyboard-setup service with systemd #

				pre_anywayshot.systemd.use_laptop_mode_tools; # pre-anywayshot use laptop-mode-tools service with systemd #

				pre_anywayshot.systemd.disable_teamviewerd; # pre-anywayshot disable teamviewerd service with systemd #

			};

			#####################################################
			#                                                   #
			# Here is end point of pre-anywayshot block of code #
			#                                                   #
			#####################################################

			if on_ac_power;

				then

					##############################################
					#                                            #
					# Here is start point block of code if on AC #
					#                                            #
					##############################################

					{

						daemon.start_gtrayicon; # daemon ac start tray indicator with gtrayicon #

						daemon.standalone.use_notify_send; # daemon ac use send standalone notification with notify-send #

						daemon.change_laptop_mode; # daemon ac change laptop mode setting as native #

						daemon.kernel.change_parameters; # daemon ac change kernel parameters as native #

						daemon.custom_battery_life_extender; # daemon ac custom battery life extender as native #

						daemon.change_brightness; # daemon ac change brightness as native #

						daemon.change_fan_speed; # daemon ac change fan speed as native #

						daemon.modprobe.change_camera; # daemon ac change camera statement with modprobe #

						daemon.change_mc_power_savings; # daemon ac change mc power savings as native #

						daemon.change_sched_smt_power_savings; # daemon ac change sched smt power savings as native #

						daemon.iw.change_wifi_parameters; # daemon ac change wifi parameters with iw #

						daemon.iwconfig.change_wifi_parameters; # daemon ac change wifi parameters with iwconfig #

						daemon.change_ipv6; # daemon ac change ipv6 statement as unknown #

						daemon.change_scsi_hosts; # daemon ac change scsi hosts as native #

						daemon.change_number_online_cores; # daemon ac change number of online cpu cores as native #

						daemon.change_cpu_cores_governor; # daemon ac change cpu cores governor as native #

						daemon.cpufreq.change_cpu_cores_governor; # daemon ac change cpu cores governor with cpufreq #

						daemon.change_pcie_aspm; # daemon ac change pcie aspm parameters as native #

						daemon.change_hal_polling; # daemon ac change hal polling statement as experimental native #

						daemon.rfkill.change_wifi; # daemon ac change wifi interface with rfkill #

						daemon.rfkill.change_bluetooth; # daemon ac change bluetooth interface with rfkill #

						daemon.hdparm.change_power_saving; # daemon ac change hard disk power saving statements with hdparm #

					};

					############################################
					#                                          #
					# Here is end point block of code if on AC #
					#                                          #
					############################################

				else

					###################################################
					#                                                 #
					# Here is start point block of code if on Battery #
					#                                                 #
					###################################################

					{

						# autosuspend feature if battery percentage less than your minimum (start) #

						if [ $use_systemd = "1" ] && [ $use_autosuspend = "1" ] && (( $(cat $path_battery_percentage) < $min_battery_percentage ))

							then

								{

									daemon.battery.suspend; # daemon battery suspend function (changeable) #

								};

							else

						# autosuspend feature if battery percentage less than your minimum (end) #

								{

									daemon.start_gtrayicon; # daemon battery start tray indicator with gtrayicon #

									daemon.standalone.use_notify_send; # daemon battery use send standalone notification with notify-send #

									daemon.battery.use_samsung_tools; # daemon battery use samsung-tools service with systemd #

									daemon.battery.use_powertop; # daemon battery use powertop #

									daemon.change_laptop_mode; # daemon battery change laptop mode setting as native #

									daemon.kernel.change_parameters; # daemon battery change kernel parameters as native #

									daemon.custom_battery_life_extender; # daemon battery custom battery life extender as native #

									daemon.change_brightness; # daemon battery change brightness as native #

									daemon.change_fan_speed; # daemon battery change fan speed as native #

									daemon.modprobe.change_camera; # daemon battery change camera statement with modprobe #

									daemon.change_mc_power_savings; # daemon battery change mc power savings as native #

									daemon.change_sched_smt_power_savings; # daemon battery change sched smt power savings as native #

									daemon.iw.change_wifi_parameters; # daemon battery change wifi parameters with iw #

									daemon.iwconfig.change_wifi_parameters; # daemon battery change wifi parameters with iwconfig #

									daemon.change_ipv6; # daemon battery change ipv6 statement as unknown #

									daemon.change_scsi_hosts; # daemon battery change scsi hosts as native #

									daemon.change_number_online_cores; # daemon battery change number of online cpu cores as native #

									daemon.change_cpu_cores_governor; # daemon battery change cpu cores governor as native #

									daemon.cpufreq.change_cpu_cores_governor; # daemon battery change cpu cores governor with cpufreq #

									daemon.change_pcie_aspm; # daemon battery change pcie aspm parameters as native #

									daemon.change_hal_polling; # daemon battery change hal polling statement as experimental native #

									daemon.rfkill.change_wifi; # daemon battery change wifi interface with rfkill #

									daemon.rfkill.change_bluetooth; # daemon battery change bluetooth interface with rfkill #

									daemon.hdparm.change_power_saving; # daemon battery change hard disk power saving statements with hdparm #

								};

						fi;

					};

					#################################################
					#                                               #
					# Here is end point block of code if on Battery #
					#                                               #
					#################################################

			fi;

			########################################################
			#                                                      #
			# Here is start point of post-anywayshot block of code #
			#                                                      #
			########################################################

			{

				longwait; # function of time polling #

				post_anywayshot.systemd.stop_setvtrgb; # post-anywayshot stop setvtrgb service with systemd #

				post_anywayshot.systemd.stop_colord; # post-anywayshot stop colord service with systemd #

				post_anywayshot.systemd.stop_preload; # post-anywayshot stop preload service with systemd #

				post_anywayshot.systemd.stop_ntp; # post-anywayshot stop ntp service with systemd #

			};

			######################################################
			#                                                    #
			# Here is end point of post-anywayshot block of code #
			#                                                    #
			######################################################

		};

	done;

};

###############################
#                             #
# Here is end point of daemon #
#                             #
###############################

# main function (start) #

function main()

{

	# main functions calls (start) #

	main.oneshot;

	main.daemon;

	# main functions calls (end) #

};

# main function (end) #

main; # main function call #