How to mount Sonoff Zigbee 3.0 USB Dongle Plus

[tdesaules]

Hello Guys !

So for the story, I'm using a small raspberry pi cluster to load docker image that manage my domotique containers with one using the zigbee2mqtt software with a Sonoff Zigbee 3.0 USB Dongle Plus adapter.

Anyway for that I use my computer with wsl2 with ubuntu image to build test all the stuff.
I try to mount the the adapter in the wsl2 distribution using usbipd.

The windows : Windows 11 Pro 21H2 22000.556
The wsl2 part : 5.10.60.1-microsoft-standard-WSL2

Think I correctly install the different part, I can list and mount the deice :

usbipd wsl list
BUSID  DEVICE                                                        STATE
1-2    Sonoff Zigbee 3.0 USB Dongle Plus                             Attached - Ubuntu
2-3    MediaTek Bluetooth Adapter                                    Not attached
2-4    Integrated Camera, Integrated IR Camera, Camera DFU Device    Not attached

I can list the device as a CP210x UART Bridge (not sure if it is "good"

lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 10c4:ea60 Silicon Labs CP210x UART Bridge
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[ 2112.532501] usb 1-1: new full-speed USB device number 6 using vhci_hcd
[ 2112.612383] vhci_hcd: vhci_device speed not set
[ 2112.682367] usb 1-1: SetAddress Request (6) to port 0
[ 2112.739896] usb 1-1: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[ 2112.739901] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2112.739903] usb 1-1: Product: Sonoff Zigbee 3.0 USB Dongle Plus
[ 2112.739905] usb 1-1: Manufacturer: ITead
[ 2112.739906] usb 1-1: SerialNumber: 24f787605329ec1193d26d7840c9ce8d

So the device is not map to a /dev/ttyXXX
I suppose there is a missing driver part regarding the CP210x but I found that strange to use a CC2652/CC1352 chip
(I'm currntly trying to rebuild the wsl2 kernel but it look like the CP210x module is already selected...

Any other idea ?

[tdesaules]

Ok so solution already explain on other post... my bad
Only need to recompil the kernel with the correct drivers like explain