This is a fork of CH55x-USB-Blaster firmware by VladimirDuan that runs on a cheap clone Altera USB Blaster with CH552G chip. It works correctly in Linux and Windows with my limited testing(I am testing with MAX V CPLD), no special drivers required.
- This fork added all needed files for correct build.
- Implement CI to build and release binary files so you don't need to setup or download any build tools or sdk files.
- Support AS mode.
- Support hardware SPI now.
CH552G can be replaced by CH551G and CH554G, in fact these models have the same Die.
| PIN | CH552G |
|---|---|
| LED | P1.1 |
| NCS | P1.4 |
| TDI/ASDI | P1.5 |
| TDO/nCfg-Done | P1.6 |
| TCK/DCLK | P1.7 |
| TMS/nCfg | P3.2 |
| ASDO | P3.3 |
| NCE | P3.4 |
Under normal circumstances, the JTAG interface is able to be compatible with the AS interface.
| 1 | 2 |
|---|---|
| TCK/DCLK | GND |
| TDO/nCfg-Done | NC |
| TMS/nCfg | nCE |
| ASDO | nCS |
| TDI/ASDI | GND |
Classic JTAG Interface.
| 1 | 2 |
|---|---|
| TCK | GND |
| TDO | VCC |
| TMS | NC |
| NC | NC |
| TDI | GND |
Classic AS Interface.
| 1 | 2 |
|---|---|
| DCLK | GND |
| nCfg-Done | VCC |
| nCfg | nCE |
| ASDO | nCS |
| ASDI | GND |