DCT - Modified to remove unwanted Ubuntu and CentOS lustre 1.6 clients, and begin work on pacemaker failover functionality.
- 512MB per VM - 3GB required for entire environment.
- using virtio paravirtualized network for better performance.
- 1GB MGT/MDT and 2 * 8GB OSTs
Installs and configures Lustre latest-feature-release server and clients. The configuration is a simplified setup inspired by http://www.dell.com/downloads/global/solutions/200-DELL-CAMBRIDGE-SOLUTIONS-WHITEPAPER-20072010b.pdf
-----------------------------
| MGS/MDS Module |
| |
| ----------- |
|MGT01 <-| |-> |
|MDT01 <-| Shared |-> |
| | | Storage | | |
| | | | | |
| | ----------- | |
| | | |
| ----------- ----------- |
| | MDS01 | | MDS02 | |
| | Active | | Standby | |
| ----------- ----------- |
-----------------------------
|
----------- |
| | |
| Clients | | -----------------------------
| | -------------------------------| OSS Module |
----------- NETWORK | |
| ----------- |
|OST01 <-| |-> |
| | <-| Shared |-> OST02|
| | | Storage | | |
| | | | | |
| | ----------- | |
| | | |
| ----------- ----------- |
| | OSS01 | | OSS02 | |
| | Active | | Active | |
| ----------- ----------- |
-----------------------------
Server supported only on CentOS 6. Clients supported on CentOS 6/7.
For introduction to lustre see https://www.citutor.org/login.php?course=61 "Using the Lustre File System - Cyberinfrastructure Tutor" and https://wiki.hpdd.intel.com/display/PUB
Assuming you have VirtualBox and Vagrant installed https://www.virtualbox.org/ https://www.vagrantup.com/downloads.html::
$ git clone https://github.com/marcindulak/vagrant-lustre-tutorial.git
$ cd vagrant-lustre-tutorial
$ vagrant plugin install vagrant-reload
$ vagrant up mds01 mds02 oss01 oss02 centos7 # this takes a couple of hours!
Test the basic funcionality of the lustre filesystem with, e.g.::
$ vagrant ssh centos7 -c "sudo su -c 'lctl dl'"
$ vagrant ssh centos7 -c "sudo su -c 'lfs osts'"
$ vagrant ssh centos7 -c "sudo su -c 'dd if=/dev/zero of=/lustre/testfile bs=1M count=512'"
$ vagrant ssh centos7 -c "sudo su -c 'lfs getstripe /lustre'"
$ vagrant ssh centos7 -c "sudo su -c 'lfs find /lustre -type f -print'"
$ vagrant ssh centos7 -c "sudo su -c 'lfs df -h'"
$ vagrant ssh centos7 -c "sudo su -c 'rm -f /lustre/testfile'"
$ vagrant ssh centos7 -c "sudo su -c 'mkdir /lustre/stripe_2'"
$ vagrant ssh centos7 -c "sudo su -c 'lfs setstripe -c 2 /lustre/stripe_2'"
$ vagrant ssh centos7 -c "sudo su -c 'dd if=/dev/zero of=/lustre/stripe_2/testfile bs=1M count=512'"
$ vagrant ssh centos7 -c "sudo su -c 'lfs getstripe /lustre/stripe_2/testfile'"
$ vagrant ssh centos7 -c "sudo su -c 'rm -rf /lustre/stripe_2'"
Benchmark with IOR, see http://goo.gl/7AWwQ referenced at http://wiki.opensfs.org/Zero_to_Hero. Testing file-per-process (only one ior process used here) small, random IO, assuming the server has 256MB RAM::
$ vagrant ssh centos7 -c "sudo su -c 'wget https://github.com/chaos/ior/archive/3.0.1.tar.gz -O ior-3.0.1.tar.gz'"
$ vagrant ssh centos7 -c "sudo su -c 'tar zxf ior-3.0.1.tar.gz'"
$ vagrant ssh centos7 -c "sudo su -c 'yum -y install automake'"
$ vagrant ssh centos7 -c "sudo su -c 'cd ior-3.0.1; sh bootstrap'"
$ vagrant ssh centos7 -c "sudo su -c 'yum -y install openmpi-devel'"
$ vagrant ssh centos7 -c "sudo su -c '. /etc/profile.d/modules.sh; module load mpi; cd ior-3.0.1; ./configure'"
$ vagrant ssh centos7 -c "sudo su -c '. /etc/profile.d/modules.sh; module load mpi; cd ior-3.0.1; make'"
$ vagrant ssh centos7 -c "sudo su -c '. /etc/profile.d/modules.sh; module load mpi; mpirun -np 1 --bynode ior-3.0.1/src/ior -v -a POSIX -i5 -g -e -w -r 512m -b 4m -o /lustre/testfile -F -C -b 256k -t 4k -O lustreStripeCount=1 -z random'"
Other benchmarks from http://www.opensfs.org/wp-content/uploads/2013/04/LIND_LUG_2013.pdf::
$ vagrant ssh centos7 -c "sudo su -c 'yum -y install bonnie++'"
$ vagrant ssh centos7 -c "sudo su -c 'bonnie++ -d /lustre -r 256 -u root'"
$ vagrant ssh centos7 -c "sudo su -c 'yum -y install http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm'"
$ vagrant ssh centos7 -c "sudo su -c 'yum -y install iozone'"
$ vagrant ssh centos7 -c "sudo su -c 'iozone –w –M –t 1 –s 512m –r 1m -i 0 –i 1 –F /lustre -R'"
$ vagrant ssh centos7 -c "sudo su -c 'wget http://downloads.sourceforge.net/project/mdtest/mdtest%20latest/mdtest-1.9.3/mdtest-1.9.3.tgz'"
$ vagrant ssh centos7 -c "sudo su -c 'mkdir mdtest-1.9.3; cd mdtest-1.9.3'"
$ vagrant ssh centos7 -c "sudo su -c 'cd mdtest-1.9.3; tar zxf ../mdtest-1.9.3.tgz'"
$ vagrant ssh centos7 -c "sudo su -c 'sed -i \"s/OS=.*/OS=Linux/\" mdtest-1.9.3/Makefile'"
$ vagrant ssh centos7 -c "sudo su -c 'yum -y install openmpi-devel'"
$ vagrant ssh centos7 -c "sudo su -c '. /etc/profile.d/modules.sh; module load mpi; cd mdtest-1.9.3; MPI_CC=mpicc make'"
$ vagrant ssh centos7 -c "sudo su -c '. /etc/profile.d/modules.sh; module load mpi; ./mdtest-1.9.3/mdtest –I 10 –i 5 –z 5 –b 2 –d /lustre'"
$ vagrant ssh centos7 -c "sudo su -c 'dd if=/dev/zero of=/lustre/testfile bs=1M count=512 oflag=direct conv=fdatasync'"
$ vagrant ssh centos7 -c "sudo su -c 'rm -f /lustre/testfile'"
Test other clients::
$ vagrant up centos6
$ vagrant ssh centos6 -c "sudo su -c 'lfs df -h'"
Test vagrant user access to the filesystem::
$ vagrant ssh centos6 -c "sudo su -c 'mkdir /lustre/vagrant'"
$ vagrant ssh centos6 -c "sudo su -c 'chown vagrant.vagrant /lustre/vagrant'"
$ vagrant ssh centos6 -c "sudo su - vagrant -c 'touch /lustre/vagrant/testfile'"
Note: users' uid/gid on the client must agree with those on mds.
Test (manual) failover of an OST::
$ vagrant ssh oss02 -c "sudo su -c 'umount /lustre/ost02'"
$ vagrant ssh centos7 -c "sudo su -c 'lfs df -h'" # this will hang
$ vagrant ssh oss01 -c "sudo su -c 'echo \"/dev/sdc /lustre/ost02 lustre defaults 0 0\" >> /etc/fstab'"
$ vagrant ssh oss01 -c "sudo su -c 'mkdir -p /lustre/ost02'"
$ vagrant ssh oss01 -c "sudo su -c 'mount /lustre/ost02'"
$ vagrant ssh centos7 -c "sudo su -c 'lfs df -h'"
When done, destroy the test machines with::
$ vagrant destroy -f
vagrant plugin install vagrant-reload
BSD 2-clause