prepare-videochat.sh

#!/bin/bash

# Script for using IP Webcam as a microphone/webcam in Ubuntu 11.04 and Arch
# Copyright (C) 2011-2012 Antonio García Domínguez
# Licensed under GPLv3

# Usage: ./prepare-videochat.sh [flip method]
#
# [flip method] is "none" by default. Here are some values you can try
# out (from gst/videofilter/gstvideoflip.c):
#
# - clockwise: clockwise 90 degrees
# - rotate-180: 180 degrees
# - counterclockwise: counter-clockwise 90 degrees
# - horizontal-flip: flip horizontally
# - vertical-flip: flip vertically
# - upper-left-diagonal: flip across upper-left/lower-right diagonal
# - upper-right-diagonal: flip across upper-right/lower-left diagonal
#
# However, some of these flip methods do not seem to work. In
# particular, those which change the picture size, such as clockwise
# or counterclockwise. *-flip and rotate-180 do work, though.
#
# IMPORTANT: make sure that audio is enabled on IP Webcam, or the script
# will not work! If it works, it should stay open after clicking OK on
# the last message dialog: that's our GStreamer graph processing the
# audio and video from IP Webcam.
#
# Last tested with:
# - souphttpsrc version 0.10.31
# - v4l2sink version 0.10.31
# - v4l2loopback version 0.5.0

# Exit on first error
set -e

if [ -n "$1" ]; then
    FLIP_METHOD=$1
else
    FLIP_METHOD=none
fi

### CONFIGURATION

# If your "adb" is not in your $PATH, set the full path to it here.
# If "adb" is in your $PATH, you don't have to change this option.
ADB_PATH=~/bin/android-sdk-linux_x86/platform-tools/adb
if which adb; then
    ADB=$(which adb)
else
    ADB=$ADB_PATH
fi

# IP used by the phone in your wireless network
WIFI_IP=192.168.2.122

# Port on which IP Webcam is listening
PORT=8080

# GStreamer debug string (see gst-launch manpage)
GST_DEBUG=soup*:0,videoflip:0,ffmpegcolorspace:0,v4l2sink:0

# URL on which a stable v4l2loopback DKMS .deb can be found (0.5.0-1)
V4L2LOOPBACK_DEB_URL=http://launchpadlibrarian.net/103765766/v4l2loopback-dkms_0.5.0-1_all.deb

# Path to which the v4l2loopback DKMS .deb should be saved
V4L2LOOPBACK_DEB_PATH=/tmp/v4l2loopback-dkms.deb

### FUNCTIONS

has_kernel_module() {
    sudo modprobe -q "$1"
}

error() {
    zenity --error --text "$@"
    exit 1
}

warning() {
    zenity --warning --text "$@"
}

info() {
    zenity --info --text "$@"
}

confirm() {
    zenity --question --text "$@"
}

can_run() {
    # It's either the path to a file, or the name of an executable in $PATH
    (test -x "$1" || which "$1") &>/dev/null
}

start_adb() {
    can_run "$ADB" && "$ADB" start-server
}

phone_plugged() {
    start_adb && test "$("$ADB" get-state)" == "device"
}

url_reachable() {
    if ! can_run curl && can_run apt-get; then
        # Some versions of Ubuntu do not have curl by default (Arch
        # has it in its core, so we don't need to check that case)
        sudo apt-get install curl
    fi
    curl -sI "$1" >/dev/null
}

send_intent() {
    start_adb && "$ADB" shell am start -a android.intent.action.MAIN -n $@
}

iw_server_is_started() {
    url_reachable "$VIDEO_URL"
}

start_iw_server() {
    send_intent com.pas.webcam/.Rolling
    sleep 2s
}

### MAIN BODY

# Check if the user has v4l2loopback
if ! has_kernel_module v4l2loopback; then
    info "The v4l2loopback kernel module is not installed or could not be loaded. I will try to install the kernel module using your distro's package manager. If that doesn't work, please install v4l2loopback manually from github.com/umlaeute/v4l2loopback."
    if can_run apt-get; then
        sudo apt-get install dkms
        wget "$V4L2LOOPBACK_DEB_URL" -O "$V4L2LOOPBACK_DEB_PATH"
        sudo dpkg -i "$V4L2LOOPBACK_DEB_PATH"
    elif can_run yaourt; then
        yaourt -S gst-v4l2loopback
        yaourt -S v4l2loopback-git
    fi

    if has_kernel_module v4l2loopback; then
        info "The v4l2loopback kernel module was installed successfully."
    else
        error "Could not install the v4l2loopback kernel module through apt-get or yaourt."
    fi
fi

# Use the first "v4l2 loopback" device as the webcam: this should help
# when loading v4l2loopback on a system that already has a regular
# webcam.
if ! can_run v4l2-ctl; then
    if can_run apt-get; then
        sudo apt-get install v4l-utils
    elif can_run pacman; then
        sudo pacman -S v4l-utils
    fi
fi
if can_run v4l2-ctl; then
    for d in /dev/video*; do
        if v4l2-ctl -d "$d" -D | grep -q "v4l2 loopback"; then
            DEVICE=$d
            break
        fi
    done
fi
if [ -z "$DEVICE" ]; then
    DEVICE=/dev/video0
    warning "Could not find the v4l2loopback device: falling back to $DEVICE"
fi

# Decide whether to connect through USB or through wi-fi
IP=$WIFI_IP
if ! can_run "$ADB"; then
    warning "adb is not available: you'll have to use Wi-Fi, which will be slower. Next time, please install the Android SDK from developer.android.com/sdk."
else
    while ! phone_plugged && ! confirm "adb is available, but the phone is not plugged in. Are you sure you want to use Wi-Fi (slower)? If you don't, please connect your phone to USB."; do
        true
    done
    if phone_plugged; then
        "$ADB" forward tcp:$PORT tcp:$PORT
        IP=127.0.0.1
    fi
fi

# Remind the user to open up IP Webcam and start the server
BASE_URL=http://$IP:$PORT
VIDEO_URL=$BASE_URL/videofeed
AUDIO_URL=$BASE_URL/audio.wav
if phone_plugged && ! iw_server_is_started; then
    # If the phone is plugged to USB and we have ADB, we can start the server by sending an intent
    start_iw_server
fi
while ! iw_server_is_started; do
    info "The IP Webcam video feed is not reachable at $VIDEO_URL. Please open IP Webcam in your phone and start the server."
done

# Load null-sink if needed
if !(pactl list | grep -q module-null-sink); then
    pactl load-module module-null-sink
fi

# Install and open pavucontrol as needed
if ! can_run pavucontrol; then
    info "You don't have pavucontrol. I'll try to install its Debian/Ubuntu package."
    sudo apt-get install pavucontrol
fi
if ! pgrep pavucontrol; then
    info "We will open now pavucontrol. You should leave it open to change the recording device of your video chat program to 'Monitor Null Output'. NOTE: make sure that in 'Output Devices' *all* devices are listed."
    pavucontrol &
fi

# Check for gst-launch
GSTLAUNCH=gst-launch
if can_run apt-get; then
    # Debian
    GSTLAUNCH=gst-launch
    if ! can_run "$GSTLAUNCH"; then
        info "You don't have gst-launch. I'll try to install its Debian/Ubuntu package."
        sudo apt-get install gstreamer-tools
    fi
elif can_run pacman; then
    # Arch
    GSTLAUNCH=gst-launch-0.10
    if ! can_run "$GSTLAUNCH"; then
        info "You don't have gst-launch. I'll try to install its Arch package."
        sudo pacman -S gstreamer0.10 gstreamer0.10-good-plugins
    fi
fi
if ! can_run "$GSTLAUNCH"; then
    error "Could not find gst-launch. Exiting."
    exit 1
fi

# Start the GStreamer graph needed to grab the video and audio
set +e
info "Using IP Webcam as webcam/microphone through $DEVICE. You can now open your videochat app."
"$GSTLAUNCH" -vt --gst-plugin-spew --gst-debug="$GST_DEBUG" \
  souphttpsrc location="http://$IP:$PORT/videofeed" do-timestamp=true is-live=true \
    ! multipartdemux \
    ! jpegdec \
    ! ffmpegcolorspace ! "video/x-raw-yuv, format=(fourcc)YV12" \
    ! videoflip method="$FLIP_METHOD" ! videorate \
    ! v4l2sink device="$DEVICE" \
  souphttpsrc location="http://$IP:$PORT/audio.wav" do-timestamp=true is-live=true \
    ! wavparse ! audioconvert \
    ! volume volume=3 ! rglimiter \
    ! pulsesink device=null sync=false \
  2>&1 | tee feed.log

info "Disconnected from IP Webcam. Have a nice day!"