ESP32 no SD card installer

[gabodiazjayme]

--------- Instructions --------
Please provide answers directly below each section.
--------- Instructions ---------

ESPixelStick Firmware Version
4.0 beta 4

Hardware Version
esp32 wroom

Binary release or compiled yourself?
yes

Operating System (and version)
windows 10 pro

Web Browser (and version)
google chrome Versión 99.0.4844.74 (Build oficial) (64 bits)

Access Point

Describe the bug
after flashing, the serial output shows "no SD card installer"

[gabodiazjayme]

after flashing, the serial output shows "no SD card installer"

[MartinMueller2003]

Which platform did you flash and please give a link to your hardware so I can see what the needed pin definitions are.

[gabodiazjayme]

link esp https://naylampmechatronics.com/espressif-esp/384-nodemcu-32-30-pin-esp32-wifi.html
link lector de memoria https://naylampmechatronics.com/almacenamiento/104-modulo-lector-de-memoria-micro-sd-card.html

I would like to know which are the connection pins of my micro SD reader to ESP32, momentarily I have solved the problem using pins D18 (SCK) , D19 (MISO) and D23 (MOSI), I have changed pin D5 to D4 for the CS, I don't know if it is correct,

[MartinMueller2003]

Does your hardware have an SD card slot and is there a card inserted into the slot? If not, then this is a normal message.

[gabodiazjayme]

hello, i have added a reader module to the esp32, i have solved the problem by changing the SC from pin D5 to pin D4, now it works very well. thank you very much for your attention. On Saturday, April 2, 2022, 05:56:30 AM CST, Martin Mueller ***@***.***> wrote: Does your hardware have an SD card slot and is there a card inserted into the slot? If not, then this is a normal message. — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you modified the open/close state.Message ID: ***@***.***>