ESP32 does not play effects from XLIGTHS in GPIO 2

[santu2898]

--------- Instructions --------
Please provide answers directly below each section.
--------- Instructions ---------

ESPixelStick Firmware Version
ESPixelStick V4 beta5

Hardware Version
ESP32 (38 PINES)

Binary release or compiled yourself?
Binary

Operating System (and version)
windows 10 Home

Web Browser (and version)

Access Point

Describe the bug
I flashed my ESP32 card with ESPixel v4 beta 5, it assigned me an IP and I used it with the Xlights program, but when configuring the outputs on the IP website and later going to the Xlights program, I placed a strip of 50 LEDs to perform a test but it turns out that the LEDs do not have the effect that I choose, it only stays white, I am working with ws2811 LEDs and a 38-pin ESP32 card, could you please help me, I am a new user, thank you in advance

[MartinMueller2003]

put the ESP into effects mode (input #2) and set a color. Make sure your lights are that color. If the lights follow the color in the effects setting, then the issue is in xLights. If the color is wrong then you do not have RGB lights and you need to set a different color order.