In this third section we will cover how to add an ingress controller to our kubernetes cluster. We will use Traefik Proxy.
The following command will create all the necessary CRDs that Traefik needs, and setup Traefik in our kubernetes cluster. It will also create an ingress route pointing to Jaeger web UI, which we previously created.
make setup_traefik
After a moment, the command:
kubectl get pods
Should output:
NAME READY UP-TO-DATE AVAILABLE AGE
traefik 1/1 1 1 5m29s
We now need to get minikube's ip address. We will modify the hosts file of our host. Allowing us to forward minikube's ip address to some custom domain name, in our case the domain tagenal and its subdomains.
minikube ip
The expected output should be similar to:
192.168.64.10
We will now open /etc/hosts and add the following lines at the very end of the file:
192.168.64.10 tagenal
192.168.64.10 grafana.tagenal
192.168.64.10 prometheus.tagenal
192.168.64.10 alertmanager.tagenal
192.168.64.10 api.tagenal
192.168.64.10 jaeger.tagenal
192.168.64.10 vtctld.tagenal
Replace the IP address by the one that
minikube ipshowed.
We already add all the domains so we won't have to modify the file again. Most of them will come in handy later during the quick start.
To conclude this step, we can now access the following URLs:
The former is Traefik web UI, and the latter is Jaeger web UI.
We have added Traefik to our kubernetes cluster, we added a route to Jaeger's web UI.
Now it is time to setup the Vitess cluster, which is described here.