Skip to content

Latest commit

 

History

History
100 lines (82 loc) · 5.79 KB

README.md

File metadata and controls

100 lines (82 loc) · 5.79 KB
Raw

Restricted Network OLM Mirror Helper

Introduction

The ansible tasks in this repo are intended to help with the task of mirroring images to a disconnected or restricted network OpenShift install.

Prequisites

This playbook has only been tested on Fedora and MacOS. It may or may not work on other Linux distributions. CentOS 7 is known not to work because the python-jinja2 package is too old. It may be possible to circumvent this by installing a newer version using pip, but this is generally inadvisable because it can cause problems wtih dnf/yum updates.

  • Fedora

    • Install python3-openshift, jq, bsdtar, ansible, and moby-engine or docker-ce. For Fedora:
      • sudo dnf -y install python3-openshift python3-docker jq bsdtar ansible moby-engine

  • MacOS

    • Assumes docker is installed on MacOS and docker cli tools available from terminal

      • Check your ~/.docker/config.json on your MacOS machine, direct host, not the docker VM

        • After you run the docker login .... commands later in this doc you will want to make sure that the auth tokens are stored in your ~/.docker/config.json, you should see explicit entries like below. If the auth values are empty, check if you have a 'credsStore' entry, if you do delete it.

          • For example, I had a "credsStore": "desktop", entry which was breaking me, I removed the entry and was working after.

          "auths": { "quay.io": { "auth": "amVkfoosomething3NyE=" }, "registry.redhat.io": { "auth": "afoovalue2zOnJzNzc=" }, "registry.stage.redhat.io": { "auth": "cmVmorerandomdA==" } },

      • Add an insecure-registries entry for the registry we will create for your OCP 3 cluster, example below

        • Pattern of docker-registry-default.apps.$OCP3_CLUSTER_HOSTNAME

        • Docker -> Preferences -> Docker Engine and add the entry similar to below

          { "debug": true, "experimental": false, "insecure-registries": [ "docker-registry-default.apps.jwm0915c-ocp3lab.mg.dog8code.com" ] }

    • brew install jq gnu-sed

    • Virtual Environment usage

      • python3 -m venv env
      • source env/bin/activate
      • pip3 install -r requirements.txt
        • To update any requirements
          • pip3 freeze > requirements.txt

  • Login to registry.redhat.io

    • These are the same credentials you log into https://access.redhat.com
    • docker login -u $username https://registry.redhat.io and enter your password when prompted.

  • Ensure you are logged into your cluster

    • With Openshift 4 a kubeconfig file is created. You can export this in your .bashrc or elsewhere
    • For example: export KUBECONFIG=/home/$USER/.agnosticd/ocp4/ocp4-workshop_ocp4_kubeconfig

Instructions

Mirror Operator

  • Create or copy an example config.yml into place if you haven't already.
    • Example for OCP 4:
      • ln -s example-configs/config.yml.cam-operator-1.3.0-mtcmetadata-example config.yml
    • Example for OCP 3:
      • ln -s example-configs/config.yml.cam-operator-1.3.0-mtcmetadata-nonolm-example config.yml
  • Remember to be logged into the correct OCP 3 or OCP 4 cluster you want to run against and have KUBECONFIG set correctly
  • ansible-playbook mirror.yml
  • For OCP 4
    • Complete rest of workflow with OLM
  • For OCP 3
    • oc create -f operator.yml - this be generated for you at end of run of 'nonolm' config
    • oc create -f controller-3.yml

Config Options

  • Update local_registry with the local/internal registry you wish to use for mirroring images
  • Update local_registry_ns with the organization/project/namespace you wish to push the images to on your registry host. If you leave the defaults either the internal registry will be used (OCP3 default) or an insecure registry will be configured (OCP4). The insecure registry is intended to be a temporary workaround.
  • Update the operators list with the operators you wish to mirror
  • Update use_shas to match whichever the operator uses. Going forward SHAs will be the standard.
  • Update deployment_namespace with the namespace you want to deploy the operator to
  • Update images with the image names and a command for finding the image tags/SHAs. See config.yml.cam-operator-1.0.1-example as an example
  • Alternatively provide a list of resolved_images. See config.yml.cam-operator-1.0.0-example as an example

Retrieve list of Operators

  • You can use the ansible-playbook list-operators.yml playbook to get a list of operators available.

Get a specific operators CSV files

  • You can use ansible-playbook get-operator-csv.yml playbook to retrieve the CSV for the operators defined in config.yml. This is useful for determining what images are required by the operator and whether or not the operator uses SHAs so you can provide an images or resolved_images list. Right now providing this list is the most tedious step since there is no standard way to define images in the CSV. This process should improve in 4.3.

TODO

  • There are quite a few shell commands that can probably be updated to use other ansible modules in order to work more smoothly
  • relatedImages is a new feature of CSV's. We can use this to get the list of images to mirror now instead of putting this work on the user
  • Deal with internal registry and global pull secret. See if we can get this to work for mirrors
  • Add some block/rescue with debug messages at typical failure points to hint at what the problem is.
  • Get docker version an attempt to configure insecure registry automatically