CHANGELOG.md

Changelog

Unreleased

Fixes:

• Envelopes will be discarded rather than blocking if the transport channel fills up (previously fixed in async-capable transports, now applied to the curl/ureq transports). (#701)

0.34.0

Features:

• Renamed the UNSTABLE_metrics and UNSTABLE_cadence feature flags to metrics and metrics-cadence1 respectively.

0.33.0

Various fixes & improvements

• ref(metrics): Add normalization and update set metrics hashing (#658) by @elramen
• feat: add embedded-svc based http transport (#654) by @madmo

0.32.3

Compatiblity:

• Raised the MSRV to 1.73.

Improvements:

• Slightly improved overhead of the tracing layer. (#642)

Updates:

• Updated reqwest to version 0.12.
• Updated tonic to version 0.11.

0.32.2

Various fixes & improvements

• feat(crons): Add new fields to MonitorConfig type (#638) by @szokeasaurusrex
• build(deps): bump h2 from 0.3.22 to 0.3.24 (#635) by @dependabot
• fix(hub): avoid deadlocks when emitting events (#633) by @Tuetuopay

0.32.1

Features:

• Add experimental implementations for Sentry metrics and a cadence sink. These require to use the UNSTABLE_metrics and UNSTABLE_cadence feature flags. Note that these APIs are still under development and subject to change.

0.32.0

Features:

• Updated sentry-tower dependencies, including axum and http.

0.31.8

Various fixes & improvements

• MonitorSchedule constructor that validates crontab syntax (#625) by @szokeasaurusrex
• fix(docs): Fix some doc errors that slipped in (#623) by @flub
• docs(tower): Mention how to enable http feature from sentry crate (#622) by @flub
• build(deps): bump rustix from 0.37.23 to 0.37.25 (#619) by @dependabot

0.31.7

Various fixes & improvements

• The minimum supported Rust version was bumped to 1.68.0 due to requirements from dependencies. (#612)

0.31.6

Various fixes & improvements

• Apply clippy fixes and cherry-pick PRs (#610) by @Swatinem
• ref: Apply user field from scope to transaction event (#596) by @kamilogorek
• Remove profiling support (#595) by @viglia
• chore: upgrade webpki-roots 0.22.5 -> 0.23.0 (#593) by @boxdot

0.31.5

Various fixes & improvements

• chore(deps): bump rustls (#592) by @utkarshgupta137

0.31.4

Various fixes & improvements

• Apply scope metadata to transactions (#590) by @loewenheim

0.31.3

Various fixes & improvements

• feat(tracing): Improve structure for tracing errors (#585) by @jan-auer

0.31.2

Various fixes & improvements

• feat(crons): Add monitor check-in types to sentry-types (#577) by @evanpurkhiser

0.31.1

Features:

• Add a new (tower-)axum-matched-path feature to use the MatchedPath as transaction name, along with attaching the request metadata to the transaction.

Fixes:

• Fix rate-limiting/filtering of raw envelopes.

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @Turbo87

0.31.0

Breaking Changes:

• Aligned profiling-related protocol types.

Features:

• Added a ProfilesSampler to the ClientOptions.

Fixes:

• Fix building ureq transport without the native-tls feature.
• Fixed serialization of raw Envelopes, and added a new from_bytes_raw constructor.

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @bryanlarsen
• @jose-acevedoflores

0.30.0

Breaking Changes:

• The minimum supported Rust version was bumped to 1.66.0 due to CI workflow misconfiguration.

Fixes:

• Switch to checked version of from_secs_f64 in timestamp_to_datetime function to prevent panics (#554) by @olksdr

Internal:

• Disable unnecessary default regex features for sentry-backtrace (#552) by @xfix
• Use correct Rust toolchain for MSRV jobs (#555) by @kamilogorek

0.29.3

Features:

• debug_images is now a default feature. (#545
• Added a from_path_raw function to Envelope that reads an envelope from a file without parsing anything. (#549)
• Added a data method to performance::Span that gives access to the span's attached data. (#548)

Fixes:

• Envelopes will be discarded rather than blocking if the transport channel fills up. (#546)

0.29.2

Various fixes & improvements

• fix: Prefer match_pattern over match_name in actix (#539) by @wuerges
• feat(profiling): Add profile context to transaction. (#538) by @viglia
• Re-disable scheduled jobs on forks (#537) by @MarijnS95
• fix: Avoid Deadlock popping ScopeGuards out of order (#536) by @Swatinem
• sentry-core: make TraceContext publicly readable (#534) by @tommilligan
• sentry-core: make TransactionContext.trace_id readable (#533) by @tommilligan
• docs: fix outdated native-tls/rustls info in README (#535) by @seritools
• features: Make tower-http enable the tower feature (#532) by @Turbo87

0.29.1

Features:

• Users of TransactionContext may now add custom context to it. This may be used by traces_sampler to decide sampling rates on a per-transaction basis. (#512)

Fixes:

• Correctly strip crates hashes for v0 symbol mangling. (#525)

Internal:

• Simplify Hub::run and SentryFuture by using a scope-guard for Hub switching. (#524, #529)

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @tommilligan

0.29.0

Features:

• Allow traces_sampler to inspect well known properties of TransactionContext (#514)

0.28.0

Breaking Changes:

• The minimum supported Rust version was bumped to 1.60.0 due to requirements from dependencies. (#498)
• Added the traces_sampler option to ClientOptions. This allows the user to customise sampling rates on a per-transaction basis. (#510)

Features:

• Add support for Profiling feature. (#479)
• Add SSL_VERIFY option to control certificate verification. (#508)
• Add Windows OS version to OS context (#499)
• Add a tower-http feature as a shortcut (#493)

Internal:

• Take advantage of weak features in Rust 1.60 for TLS enablement (#454)
• Turn off pprof default features (#491)
• Change session update logic to follow the spec (#477)
• Extract public event_from_error fn in sentry-anyhow (#476)

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @MarijnS95
• @lpraneis
• @tommilligan

0.27.0

Breaking Changes:

• The minimum supported Rust version was bumped to 1.57.0 due to requirements from dependencies. (#472)
• Add the rust-version field to the manifest. (#473)
• Update to edition 2021. (#473)

Features:

• Implement Envelope::from_path and Envelope::from_slice. (#456)
• Add basic attachment support. (#466)

Internal:

• Replace ancient lazy_static crate with once_cell or const slices. (#471)

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @MarijnS95
• @timfish

0.26.0

Breaking Changes:

• Updated the debugid and uuid dependencies to versions 0.8.0 and 1.0.0 respectively.

Features:

• Request data can now be attached to Transactions and Spans via set_transaction. (#439)
• macOS versions are now reported instead of the Darwin kernel version. (#451)
• Support capturing the error of functions instrumented with #[instrument(err)]. (#453)
• Support capturing span data of instrumented functions. (#445)
• Expose the debug_images function from sentry-debug-images.

Fixes:

• Generate a more correct request URL in the sentry-tower integration. (#460)
• Do not panic on invalid HTTP(S)_PROXY env. (#450)

Internal:

• Project Ids in DSN are treated as opaque strings. (#452)

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @jessfraz
• @hannes-vernooij
• @rajivshah3
• @MarijnS95
• @kvnvelasco
• @poliorcetics
• @pbzweihander

0.25.0

Breaking Changes:

• The minimum supported Rust version was bumped to 1.54.0 due to requirements from dependencies.
• Updated the sentry-actix integration to actix-web@4. (#437)

Features:

• Calling Scope::set_transaction will override the Transaction name of any currently running performance monitoring transaction. (#433)

Fixes:

• Make sure Spans/Transactions have a meaningful/non-empty name. (#434)

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @jessfraz
• @fourbytes

0.24.3

Features:

• Added ureq transport support. (#419)
• Added GpuContext to the Context. (#428)

Fixes:

• Remove unused serde_json feature from curl dependency. (#420)
• sentry-tracing: When converting a tracing event to a sentry event, don't create an exception if the original event doesn't have one (#423)
• sentry-tracing: Add line numbers and tags into custom Contexts sections. (#430)

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @MarijnS95

0.24.2

Fixes:

• Make sure sentry-core compiler without the client feature. (#416)
• Fix incorrect wrapping of Service Futures in sentry-tower that could lead to memory leaks combined with the Http Service. (#417)

0.24.1

Breaking Changes:

• The minimum supported Rust version was bumped to 1.53.0 due to requirements from dependencies.
• The backtrace feature of sentry-anyhow is enabled by default. (#362)
• The tracing-subscriber dependency of sentry-tracing has been bumped to version 0.3.x. (#377)
• Scope::add_event_processor now takes a generic parameter instead of a boxed function.(#380)
• The new performance monitoring APIs required changes to a few protocol types.
• A few more constructors are now decorated with #[must_use].
• Usage of chrono in public API types was removed in favor of SystemTime. (#409)

Features:

• Added manual APIs for performance monitoring and span/transaction collection. (#395)
• Added span/transaction collection to sentry-tracing. (#350, #400)
• Added a new crate sentry-tower and feature tower that enables integration with tower. (#356)
• The new sentry-tower crate has a http feature which can be used to log request details and start new performance monitoring spans based on incoming distributed tracing headers. (#397)
• Similarly, the sentry-actix integration also has the ability to start new performance monitoring spans based on incoming distributed tracing headers. (#411)
• Added a new feature surf-h1 for using surf with the h1 client. (#357)
• Added support for Span::record to sentry-tracing. (#364)
• Errors captured in the tracing integration are being reported as sentry Exceptions. (#412)
• Added Windows support for debug images. (#366)

Fixes:

• The tokio dependency is now only required for the curl, reqwest, and surf features. (#363)
• The rate limiting implementation was updated to follow the expected behavior. (#410)

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @Tuetuopay
• @zryambus
• @Jasper-Bekkers
• @danielnelson
• @leops
• @Turbo87
• @DmitrySamoylov
• @seanpianka

0.23.0

Breaking Changes:

• The minimum supported Rust version was bumped to 1.46.0 due to requirements from dependencies.

Features:

• Added support for pre-aggregated Sessions using the new SessionMode::Request option. This requires Sentry 21.2.
• Added a new Client::flush method to explicitly flush the transport and use that to make sure events are flushed out when using panic=abort.
• Added a new flush hook to the Transport trait.
• Exposed a new RateLimiter utility that transport implementations can use to drop envelopes early when the DSN is being rate limited.
• Optionally allow capturing backtraces from anyhow errors.
• Added new crate sentry-tracing and feature tracing that enables support to capture Events and Breadcrumbs from tracing logs.

Fixes:

• Honor the attach_stacktrace option correctly when capturing errors.
• Added the missing addr_mode property to Frame.
• Fixed extracting the error type from a anyhow::msg.

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @XX
• @Jake-Shadle
• @Tuetuopay
• @irevoire
• @pbzweihander

0.22.0

Breaking Changes:

• The minimum supported Rust version was bumped to 1.45.0.
• The deprecated error-chain and failure integrations, features and crates were removed.

Features:

• The slog integration now supports capturing slog::KV pairs for both breadcrumbs and events.
• Preliminary support for attachments was added to sentry-types and the Envelope. However, deeper integration into the SDK is not yet complete.

Fixes:

• Fix regression defaulting ClientOptions::environment from SENTRY_ENVIRONMENT.
• The debug-images integration now captures the correct image_addr.
• Do not send invalid exception events in the log and slog integrations. Both integrations no longer attach the location. To receive location information, set options.attach_stacktrace to true.
• Process all event backtraces the same way.
• Fix a panic in the session flusher.

Updates:

• Updated reqwest to version 0.11, which is based on tokio 1.
• Removed usage of the abandoned im crate, thus solving a transitive RUSTSEC advisory.

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @jrobsonchase
• @Jake-Shadle

0.21.0

Breaking Changes:

• Bump the minimum required Rust version to 1.42.0.
• The actix integration / middleware is now compatible with actix-web 3.
• Removed all deprecated exports and deprecated feature flags.
• The failure integration / feature is now off-by-default along with its deprecation.
• The log and slog integrations were re-designed, they now offer types that wrap a log::Log or slog::Drain and forward log events to the currently active sentry Hub based on an optional filter and an optional mapper.
• The new log integration will not implicitly call log::set_max_level_filter anymore, and users need to do so manually.

Features:

• The SDK will now set a default environment based on debug_assertions.
• Session updates are now sent lazily.
• Add the new end_session_with_status global and Hub functions which allow ending a Release Health Session with an explicit SessionStatus.

Deprecations:

• The error-chain and failure integration was officially deprecated and will be removed soon.

0.20.1

Fixes:

• Fixed a deadlock when nesting configure_scope calls.
• Improved transport shutdown logic and fixed a potential deadlock on shutdown.

0.20.0

Highlights:

• The Rust SDK now has experimental support for Release Health Sessions using the start_session and end_session API (global and on the Hub).

Breaking Changes:

• The Transport was changed to work on Envelopes instead of Events. The send_event trait function was removed in favor of send_envelope.

Features:

• The Envelope, SessionUpdate, and other related types have been added to the sentry_types::protocol::v7 module.
• A clear_breadcrumbs method was added to Scope.
• sentry_contexts::utils is now public.

Fixes:

• Panic events now have a proper mechanism.

Deprecations:

• The Future and FutureExt exports have been renamed to SentryFuture and SentryFutureExt respectively.

Thank you:

Features, fixes and improvements in this release have been contributed by:

• @Jake-Shadle
• @maxcountryman
• @ErichDonGubler
• @nCrazed
• @jrconlin

0.19.1

Fixes:

• Better deal with concurrent Hub access.

0.19.0

Highlights:

The sentry crate has been split up into a sentry-core, and many smaller per-integration crates. Application users should continue using the sentry crate, but library users and integration/transport authors are encouraged to use the sentry-core crate instead.

Additionally, sentry can now be extended via Integrations.

Breaking Changes:

• The utils module has been removed, and most utils have been moved into integrations.
• The integrations module was completely rewritten.
• When constructing a Client using a ClientOptions struct manually, it does not have any default integrations, and it does not resolve default options from environment variables any more. Please use the explicit apply_defaults function instead. The init function will automatically call apply_defaults.
• The init function can’t be called with a Client anymore.

Features:

• Sentry can now capture std::error::Error types, using the capture_error and Hub::capture_error functions, and an additional event_from_error utility function.
• Sentry now has built-in support to bind a Hub to a Future.
• Sentry can now be extended with Integrations.
• The ClientInitGuard, Future and ScopeGuard structs and apply_defaults, capture_error, event_from_error, with_integration and parse_type_from_debug functions have been added to the root exports.
• The FutureExt, Integration, IntoBreadcrumbs, IntoDsn, Transport and TransportFactory traits are now exported.
• The types module now re-exports sentry-types.

Deprecations:

• The internals module is deprecated. Please use items from the crate root or the types module instead.
• All the feature flags have been renamed, the old names are still available but will be removed in the future.

0.18.1

• Fix potential segfault with with_debug_meta (#211).
• Fix panic when running inside of tokio (#186).

0.18.0

• Bump the minimum required Rust version to 1.40.0.

• Upgrade most dependencies to their current versions (#183):

  • env_logger 0.7
  • reqwest 0.10
  • error-chain 0.12
  • url 2.1
  • sentry-types 0.14

• Remove the log and env_logger integration from default features (#183).

• Fix backtraces for newer failure and backtrace versions (#183).

• Fix compilation of the with_rust_info feature (#183).

• Add "panics" sections to functions that may panic (#174).

• Document all feature flags consistently.

0.17.0

• Upgrade findshlibs (#153)

0.16.0

• Bump the minimum required Rust version to 1.34.0.
• Fix potentially broken payloads when using the curl transport (#152).
• Report the SDK as sentry.rust for analytics (#142).

0.15.5

• Fix backtraces with inline frames in newer Rust versions (#141).

0.15.4

• Added a feature flag to disable the default sentry features in sentry-actix. (#139)

0.15.3

• Added with_rustls and with_native_tls features to control SSL in the default reqwest transport. (#137)

0.15.2

• Added support for passing custom reqwest clients/curl handles to the transport (#130)

0.15.1

• Correct dependency bump for sentry types.

0.15.0

• Upgraded to newer version of the internal sentry types crate.

0.14.2

• Fixed a potential issue where an event might have been dropped if it was sent right after the curl transport was created.

0.14.1

• Fixed an issue where turning off the http transports would cause a compile error.

0.14.0

• Added support for reading SENTRY_ENVIRONMENT and SENTRY_RELEASE environment variables.
• Added support for panicking with failure errors.
• Added attach_stacktraces configuration option to logging integration
• Fixed a bug where emit_breadcrumbs was incorrectly handled.
• Restructured the transport system. You can now disable the builtin HTTP reqwest based transport or opt for the curl transport.
• Fixed a potential issue where an event might have been dropped if it was sent right after the reqwest transport was created.
• Added support for server side symbolication for linux platforms.

0.13.0

Breaking Change: This release requires Rust 1.31 or newer.

• Upgrade the logger integration to env_logger:0.6
• Support debug identifiers of loaded images on Linux (#114)
• Update sentry-types to the latest version
• Fix log::log_enabled! when log integration is active

0.12.1

• Resolve a memory leak in the actix integration.
• Fix an issue where dropping a scope guard for a non active hub resulted in a panic.
• Added support for the new failure Fail::name
• Improved support for actix failure based error
• Added RefUnwindSafe for ClientOptions
• Remove the never supported repos option.

0.12.0

• Upgrade reqwest to 0.9
• Add support for debug logging through the log crate (with_debug_to_log feature)
• Added debug log for when events are dropped in the transport.

0.11.1

• Fix compilation error in sentry-actix (#87)

0.11.0

• Added sentry::with_scope
• Updated the sentry types to 0.8.x

0.10.0

• Streamline types with other SDKs. Most notabe changes:
  • Event::id has been renamed to Event::event_id
  • Event::exceptions has been renamed to Event::exception
  • Some collections are now wrapped in Values
• Added more debug logs.

0.9.0

• Removed drain_events. Events are now drained by calling Client::close or on the transport on Transport::shutdown.
• Removed Hub::add_event_processor. This was replaced by Scope::add_event_processor which is easier to use (only returns factory function)/
• Added various new client configuration values.
• Unified option handling

This is likely to be the final API before 1.0

0.3.1

• Remove null byte terminator from device model context (#33)
• Fix uname breaking builds on Windows (#32)
• Fix the crate documentation link (#31)