HT-503 Settings

See Making the Phone Vanish – Telephone Calls via an HT-503 and Raspberry Pi for a discussion of these settings.

BASIC SETTINGS

Telnet Server: No
Device Mode: Bridge
WAN side HTTP/Telnet access: Yes
Unconditional Call Forward to VOIP: 2000 / ip.address.raspberry.pi / 5060

FXO PORT

Account Active: Yes
Primary SIP Server: ip.address.raspberry.pi
Outbound Proxy: ip.address.raspberry.pi
SIP User ID: ht503fxo
Authenticate ID: ht503fxo
Authenticate Password: 1234
SIP Registration: Yes
FXO Termination > Number of Rings: 2
FXO Termination > Impedance-based: Yes
FXO Termination > PSTN Ring Thru FXS: No
Channel Dialing > Stage Method (1/2): 1

FXS PORT

Account Active: Yes
Primary SIP Server: ip.address.raspberry.pi
Outbound Proxy: ip.address.raspberry.pi
SIP User ID: ht503fxs
Authenticate ID: ht503fxs
Authenticate Password: 1234
SIP Registration: Yes

HT-503 Country Specific Settings

The following settings are specific to France.

BASIC SETTINGS

Time Zone: GMT+01:00

ADVANCED SETTINGS

Dial Tone: f1=440@-10,f2=0@-10,c=0/0;
Ringback Tone: f1=440@-10,f2=0@-10,c=150/300;
Busy Tone: f1=440@-10,f2=0@-10,c=50/50;
Reorder Tone: f1=440@-10,f2=0@-10,c=50/50;

See Operational Bulletin No. 781 (1.II.2003) and Annexed List: Various tones used in national networks for tone references.

FXS PORT

SLIC Setting: France

FXO PORT

FXO Termination > PSTN Disconnect Tone: f1=440@-30,f2=440@-30,c=50/50;
FXO Termination > Country-based: France