This is an userspace utility for prevention of hanging Strix Claw mouse when DPI or side buttons are pressed. are pressed. It reads events from interface 2, which is commonly used for additional features for mices and keyboards.
As an example, a part of lsusb and lsusb -t with Strix Tactic Pro and Strix Claw:
Bus 001 Device 009: ID 195d:1016 Itron Technology iONE
Bus 001 Device 008: ID 195d:2039 Itron Technology iONE
|__ Port 10: Dev 7, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 8, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 8, If 2, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 1: Dev 8, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 9, If 2, Class=Human Interface Device, Driver=, 12M
|__ Port 2: Dev 9, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 9, If 1, Class=Human Interface Device, Driver=usbhid, 12M
Notice, that kernel driver for interface 2 for mouse is absent. Tristan Šneider made an investigation and found, that reading data from that interface is enough.
A libusb-1.0 is required for building. On Debian Stretch it will can installed by:
# apt-get install libusb-1.0-0-dev
Building the utility is simple as that:
$ make
Utility requires root's privileges to run:
# ./strix-claw
When utility autostart and run-keeper (utility will be terminated when mouse is being disconnected), systemd can do that job for you.
To install strix-claw to your system:
# cp strix-claw /usr/local/bin
# cp strix-claw.service /etc/systemd/system
# systemctl enable strix-claw.service
# systemctl start strix-claw.service
- support of multiple devices simulatenously
- implement a kernel module or patch usbhid subsystem