price-list-2024.md

Minimal Price List for this Maker100 course updated with Products for 2024.

Note A star * is for items that the classroom only needs a few since students typically work at their own pace on the assignments.

1. $104 USD Arduino PortentaH7
   

2. $63.00 USD LoRa Vision Shield
   

3. $14.00 USD set of 4. LoRa Antenna with u.fl connector and 915MHz for North America *DIYmalls 915MHz LoRa Antenna U.FL IPEX to SMA Connector Pigtail 2dBi
   Just found this set of 2 for $9.00 USD DIYmall-Connector-Antenna-915MHz

4. $13.00 USD XIAO Esp32S3 Sense
   

5. $49.00 USD Grove Starter Kit
   

6. $5.40 USD Seeeduino XIAO for testing unknowns
   

7. $40.50 USD *Nano 33 Ble Sense-rev2
   

8. The $115.00 USD *NiclaVision is very good for Vision, sound and accelerometer Machine Learning
   
   
   

9. $23.00 USD 1.5inch OLED Display Module 128x128 16 Gray Scale SPI/I2C Interface SSD1327 Driver Raspberry Pi/Arduino/STM32 or from waveshare ($12.99 USD) 128x128, General 1.5inch OLED display Module, SKU: 13992
   

10. $8.99 CAD UGREEN USB Type C Cable Nylon Braided USB 2.0 to USB C Cable
    

11. $15.99 CAD 5000mAh Power Bank Portable Charger
    

12. $25.00 USD arduino-mkr-imu-shield
    

13. $35.26 CAD Arduino Starter Kit: Everything you need to get going building things with Arduino (breadboards, LED's, push buttons, resistors ...) Elecrow Starter Kit for Raspberry Pi & Arduino
    or do a generic search https://www.amazon.com/s?k=arduino+starter+kit

14. $35 CAD Sensor Kit: Consider getting one of the many Arduino style sensor kits on the market. *Kuman 37-in-1 Sensor Kit Compatible with Arduino Raspberry Pi Mega 2560 Kits Compatible K5
    

15. $24.21 CAD Basic Solder kit: good to have *Plusivo Soldering Kit for Electronics (US Electrical Plug)
    

16. $17.02 CAD * 22 AWG wires solid core with cheap wire stripper
    

17. $19.95 USD Servo motor
    

18. $23.95 USD Stepper Motor
    

19. $5.95 USD Driver A4988 Stepper Motor Driver Carrier
    

20. $9.95 USD Dual motor driver
    

21. $54.95 USD big motor driver
    

22. $29.90 CAD Grove GPS Module
    

23. $10.19 USD Flex sensor (Might want 5 of these) RB-Spa-989
    

24. $80.00 CAD *Pixy camera purchase Charmed Labs Pixy 2 CMUcam5 Image Sensor
    

25. $7.56 CAD Slide Potentiometer RB-See-229
    

26. $4.80 CAD Moisture RB-Dfr-161
    

27. $36.80 USD Arduino MKR GPS Shield
    

28. $478.71 CAD *Andonstar ADSM302 560X Digital Microscope HDMI 1080P Full HD Scope with 5 inch LCD Screen for Soldering Phone Repair Tools
    

29. $146.99 CAD *2 in 1 750W LED Digital Soldering Station Hot Air Gun Rework Station Electric Soldering Iron for Phone PCB IC SMD BGA Welding Set 110V
    

30. $20.26 CAD *Chip Quik SMDLTLFP Solder Paste Sn42/Bi57.6/Ag0.4 No-Clean Lead-Free Low Temperature Melts 138C 281F
    

31. $36.99 CAD *Keadic 5Pcs Solder Wire with Rosin Core Set 0.6mm 0.8mm 1.0mm 1.2mm 1.5mm for Most Electrical Soldering, Sn 99% Ag 0.3% Cu 0.7%
    

32. $15.99 CAD *10 pack of 40 pin male female headers
    

33. $169.99 *Elenco-SC-750-Snap-Circuits-Extreme
    

34. $12.43 *10 Snap to pin cables
    

35. *3D Printer.
    
    I have the $2,499.00 CAD Tinkerine
    Which does not have a heated print bed
    I also have a 12x12x12 ~$4000 CAD Raise3D N2 V2 which has a dual extruder which is handy but is also very complex,
    any working 3D Printer would be fine. The above printers are very reliable but do not necessarily print better than a cheaper one.

Reminder the star "*" beside a material means that in general you don't need the device for every student or pair of students just a few in the lab is good enough.

Total about $4000 USD to get the one full set of equipment. Without the starred items my course would cost about $500 per pair of students. While the lab would need about $5000 worth of starred equipment.

This is not a perfect list as a few of these items will need to be tested in 2024.