Skip to content

Latest commit

 

History

History
358 lines (252 loc) · 14.7 KB

README.md

File metadata and controls

358 lines (252 loc) · 14.7 KB
Raw

Deploy ManageIQ on OpenShift

Build Status Join the chat at https://gitter.im/ManageIQ/manageiq-pods

This guide will demo deploying ManageIQ in OpenShift as its example use-case but this method could actually be used in a different container cluster environment

Purpose

This example gives a base template to deploy a multi-pod ManageIQ appliance with the DB stored in a persistent volume on OpenShift. It provides a step-by-step setup including cluster administrative tasks as well as basic user information and commands. The ultimate goal of the project is to be able to decompose the ManageIQ appliance into several containers.

Prerequisites:

  • OpenShift Origin 1.5 or higher
  • NFS or other compatible volume provider
  • A cluster-admin user

Cluster Sizing

In order to avoid random deployment failures due to resource starvation, we recommend a minimum cluster size for a test environment.

  • 1 x Master node with at least 8 VCPUs and 12GB of RAM
  • 2 x Nodes with at least 4 VCPUs and 8GB of RAM
  • 20GB of storage for MIQ PV use

Other sizing considerations:

  • Recommendations assume MIQ will be the only application running on this cluster.
  • Alternatively, you can provision an infrastructure node to run registry/metrics/router/logging pods.

Installing

$ git clone https://github.com/ManageIQ/manageiq-pods.git

Pre-deployment preparation tasks

As basic user

Login to OpenShift and create a project

Note: This section assumes you have a basic user.

$ oc login -u <user> -p <password>

Next, create the project as follows:

$ oc new-project <project_name>

Make a persistent volume to host the MIQ database data (if necessary)

A deployment will need a persistent volume (PV) to store data only if the database is running as a pod.

NFS PV templates are provided, please skip this step you have already configured persistent storage.

For NFS backed volumes, please ensure your NFS server firewall is configured to allow traffic on port 2049 (TCP) from the OpenShift cluster.

Note: Recommended permissions for the PV volumes are 777, root uid/gid owned.

As admin:

Creating the required PV may be a one or two step process. You may create the initial template now, and then process them and create the PV later, or you may do all of the processing and PV creation in one pass

There are three parameters required to process the template. Only NFS_HOST is required, PV_SIZE and BASE_PATH have sane defaults already

  • PV_SIZE - Defaults to the recommended PV size for the App/DB template (5Gi/15Gi respectively)
  • BASE_PATH - Defaults to /exports
  • NFS_HOST - No Default - Hostname or IP address of the NFS server

Method 1 - Create Template, Process and Create Later

This method first creates the template object in OpenShift and then demonstrates how to process the template and fill in the required parameters at a later time.

$ oc create -f templates/miq-pv-db-example.yaml
# ... do stuff ...
$ oc process manageiq-db-pv -p NFS_HOST=nfs.example.com | oc create -f -

Method 2 - Process Template and Create PV in one pass

# oc process templates/miq-pv-db-example.yaml -p NFS_HOST=nfs.example.com | oc create -f -

Verify PV creation

$ oc get pv
NAME      CAPACITY   ACCESSMODES   RECLAIMPOLICY   STATUS      CLAIM     STORAGECLASS   REASON    AGE
miq-db    15Gi       RWO           Retain          Available                                      1s

It is strongly suggested that you validate NFS share connectivity from an OpenShift node prior to attempting a deployment.

Deploy MIQ

If you wish to add a SSL certificate now, you can use your cert and key files to create the required secret:

$ oc create secret tls tls-secret --cert=tls.crt --key=tls.key

Application parameters can be specified in a parameters file. An example file can be found in the project root The existing parameters file contains all the default values for template parameters. You can create a new file containing any customizations.

As basic user

$ ./bin/deploy <parameters_file>

Deploy MIQ using an external database

Before you attempt an external DB deployment please ensure the following conditions are satisfied:

  • Your OpenShift cluster can access the external PostgreSQL server
  • The external PostgreSQL server must run version 10
  • MIQ user, password and role have been created on the external PostgreSQL server
  • The intended MIQ database is created and ownership has been assigned to the MIQ user

To use an external database, ensure that the DATABASE_HOSTNAME parameter is provided in your parameters file. DATABASE_NAME, DATABASE_PORT, DATABASE_USER, and DATABASE_PASSWORD should also be checked and set if necessary.

Verifying the setup was successful

Note: The first deployment could take several minutes as OpenShift is downloading the necessary images.

Check readiness of the MIQ pods

Note: Please allow ~5 minutes once pods are in Running state for MIQ to start responding on HTTPS

The READY column denotes the number of replicas and their readiness state

$ oc get pods
NAME                                     READY     STATUS    RESTARTS   AGE
httpd-754985464b-4dzzx                   1/1       Running   0          37s
manageiq-orchestrator-5997776478-vx4v9   1/1       Running   0          37s
memcached-696479b955-67fs6               1/1       Running   0          37s
postgresql-5f954fdbd5-tnlmf              1/1       Running   0          37s

Once the database has been migrated and the orchestrator pod is up and running, it will begin to start worker pods. After a few minutes you can see the initial set of worker pods has been deployed and the user interface should be accessible.

$ oc get pods
NAME                                     READY     STATUS    RESTARTS   AGE
event-handler-747574c54c-xpcvf           1/1       Running   0          32m
generic-55cc84f79d-gwf5v                 1/1       Running   0          32m
generic-55cc84f79d-w4vzs                 1/1       Running   0          32m
httpd-754985464b-4dzzx                   1/1       Running   0          37m
manageiq-orchestrator-5997776478-vx4v9   1/1       Running   0          37m
memcached-696479b955-67fs6               1/1       Running   0          37m
postgresql-5f954fdbd5-tnlmf              1/1       Running   0          37m
priority-7b6666cdcd-5hkkm                1/1       Running   0          32m
priority-7b6666cdcd-rcf7l                1/1       Running   0          32m
remote-console-6958c4cc7b-5kmmj          1/1       Running   0          32m
reporting-85c8488848-p5fb6               1/1       Running   0          32m
reporting-85c8488848-z7kjp               1/1       Running   0          32m
schedule-6fd7bc5688-ptsxp                1/1       Running   0          32m
ui-5b8c86f6f9-jhd9w                      1/1       Running   0          32m
web-service-858f55f55d-5tmcr             1/1       Running   0          32m

Scale MIQ

ManageIQ worker deployments can be scaled from within the application web console. Navigate to Configuration -> Server -> Workers tab to change the number of worker replicas.

Additional workers for provider operations will be deployed or removed by the orchestrator as providers are added or removed and as roles change.

Note: The orchestrator will enforce its desired state over the worker replicas. This means that any changes made to desired replica numbers in the OpenShift UI will be quickly reverted by the orchestrator.

Pod access and ingress

Get a shell on the MIQ pod

$ oc rsh <pod_name> bash -l

Obtain host information from route

An ingress should have been deployed via template for HTTPS access on the MIQ pod When an ingress is deployed in OpenShift, a route is automatically created.

$ oc get ingress
NAME      HOSTS                              ADDRESS   PORTS     AGE
httpd     miq-dev.apps.example.com                     80, 443   56s
$ oc get routes
NAME          HOST/PORT                          PATH      SERVICES   PORT      TERMINATION     WILDCARD
httpd-qlvmj   miq-dev.apps.example.com           /         httpd      80        edge/Redirect   None

Examine output and point your web browser to the reported URL/HOST.

Logging In

Per the ManageIQ project basic configuration documentation, you can now login to the MIQ web interface using the default username (admin) and either the default password (smartvm) of the password configured using the APPLICATION_ADMIN_PASSWORD parameter.

Backup and restore of the MIQ database

Backup and restore of the MIQ database can be achieved via openshift jobs. Keep in mind an extra PV will be required with enough capacity to store as many backup copies as needed.

A backup volume claim is created with the first backup job run, be sure to provide an adaquate setting for the DATABASE_BACKUP_VOLUME_CAPACITY parameter.

Launch a backup job

Backups can be initiated with the database online, the job will attempt to run immediately after creation.

$ oc process -f templates/ops/miq-backup-job.yaml | oc apply -f -

The backup job will connect to the MIQ database pod and perform a full binary backup of the entire database cluster using pg_basebackup.

Check the job status and logs

$ oc get pods
NAME                              READY     STATUS        RESTARTS   AGE
database-backup-18m5m3a2-zscq6    0/1       Completed     0          28m

$ oc logs database-backup-18m5m3a2-zscq6
== Starting MIQ DB backup ==
Current time is : Thu Mar 26 20:44:15 UTC 2020
pg_basebackup: initiating base backup, waiting for checkpoint to complete
pg_basebackup: checkpoint completed
pg_basebackup: write-ahead log start point: 0/4000028 on timeline 1
73565/73565 kB (100%), 1/1 tablespace
pg_basebackup: write-ahead log end point: 0/402B280
pg_basebackup: base backup completed
Sucessfully finished backup : Thu Mar 26 20:46:02 UTC 2020
Backup stored at : /backups/miq_backup_20200326T204414

Backup API objects at the project level

$ oc get secret -o yaml --export=true > secrets.yaml
$ oc get pvc -o yaml --export=true > pvc.yaml

The MIQ secrets object contains important data regarding your deployment such as database encryption keys and other credentials, backup and save objects in a safe location.

Restoring a database backup

The database restoration must be done OFFLINE, scale down prior attempting this procedure otherwise corruption can occur.

$ oc scale deploy/orchestrator --replicas=0 # this should scale down all the worker pods as well
$ oc scale deploy/postgresql --replicas=0

Notes about restore procedure:

  • The sample restore job will bind to the backup and production PG volumes via "postgresql-backup" and "postgresql" PVCs by default
  • If existing data is found on the production PG volume, the restore job will NOT delete this data, it will rename it and place it on the same volume
  • The latest successful DB backup will be restored by default, this can be adjusted via the DATABASE_BACKUP_VERSION environment variable on restore object template

Launch a database restore

$ oc process -f templates/ops/miq-restore-job.yaml -pDATABASE_BACKUP_VERSION=miq_backup_20200326T204414 | oc apply -f -

Check the restore job status and logs

$ oc get pods
NAME                              READY     STATUS        RESTARTS   AGE
database-backup-18m5m3a2-zscq6    0/1       Completed     0          34m
database-restore-yghrx7c4-7mqdr   0/1       Completed     0          40s

$ oc logs database-restore-yghrx7c4-7mqdr
== Checking postgresql:5432 status ==
postgresql:5432 - no response
== Checking for existing PG data ==
Existing data found at : /restore/userdata
Existing data moved to : /restore/userdata_20200326T211744
== Starting MIQ DB restore ==
Current time is : Thu Mar 26 21:17:48 UTC 2020
Restoring database at /backups/miq_backup_20200326T204414/base.tar.gz
tar: Read checkpoint 500
tar: Read checkpoint 1000
tar: Read checkpoint 1500
tar: Read checkpoint 2000
tar: Read checkpoint 2500
tar: Read checkpoint 3000
tar: Read checkpoint 3500
tar: Read checkpoint 4000
tar: Read checkpoint 4500
tar: Read checkpoint 5000
tar: Read checkpoint 5500
tar: Read checkpoint 6000
tar: Read checkpoint 6500
tar: Read checkpoint 7000
Sucessfully finished DB restore : Thu Mar 26 21:18:00 UTC 2020

Re-scale postgresql DC and verify proper operation

$ oc scale dc/postgresql --replicas=1

Check the PG pod logs and readiness status, if successful, proceed to re-scale rest of deployment

$ oc scale dc/manageiq-orchestrator --replicas=1

Troubleshooting

Under normal circumstances the entire first time deployment process should take around ~10 minutes, indication of issues can be seen by examination of the deployment events and pod logs.

Building Images

The bin/build script will build the entire chain of images.

The script requires at a minimum the -d option to specify the location of the images directory, (./images if run from the repo root) and the -r option to specify the resulting image repo and namespace.

For example, if you wanted to build all the images tagged as manageiq/<image-name>:latest, you would run the following command from the repo root.

./bin/build -d images -r manageiq

Additional options are also available:

  • -n Use the --no-cache option when running the manageiq-base image build
  • -p Push the images after building
  • -t <tag> Tag the built images with the specified tag (default: latest)

Additionally the source fork and git ref for manageiq, manageiq-appliance and manageiq-ui-service can be set using the following environment variables:

  • MIQ_REF
  • APPLIANCE_REF
  • SUI_REF
  • MIQ_ORG
  • APPLIANCE_ORG
  • SUI_ORG

A more complicated example would be to build and push all the images to the quay.io repository "test" using the source from the "feature" branch on the "example" fork of ManageIQ:

MIQ_ORG=example MIQ_REF=feature ./bin/build -d images -r quay.io/test -p

Kubernetes support

The objects created by processing the templates in this project are also compatible with Kubernetes, but template objects themselves are not. For this reason, it is suggested to use the oc binary to process the templates and create the objects even in a kubernetes cluster (this is what the bin/deploy script does).