README.md

Workshop flame sensor

Introduction

In this workshop we will see how to detect heat/fire/flame with the flame sensor using the Raspberry Pi.

Wiring

flame sensor	Raspberry Pi
Ground	GND
Vcc / +	5V
DO (digital output)	GPIO 21

Code

1- Power your raspberry

You can achive it with connecting it to your pc trought the Micro USB Port of the raspberry pi

2- Connect to your raspberry pi

Using putty if you're on windows, Ssh if you're on a linux based os Follow the following instruction if you dont know how to connect to raspberry pi Connect to Raspberry Pi using Putty

3- Download Flame Sensor binary file

Assuming you're connected with... copy and past this command If you're using Raspberry zero

curl -O https://raw.githubusercontent.com/ionoid-io-projects/workshop_flame_sensor/master/bin/arm6/flame

If you're using Raspberry 3 b

curl -O https://raw.githubusercontent.com/ionoid-io-projects/workshop_flame_sensor/master/bin/arm7/flame

make it executable

chmod +x flame

4- execute binary

./flame

How to stop the program

To quit or stop the program click on Ctrl+C

Congratulation.

Ressource Follow link below for pin connections https://www.piddlerintheroot.com/flame-sensor/