After trying some of the time controlled covers based in automations (with poor results) I found the implementation for KNX cover:
This piece of code is the basis for my implementation. The merit and all my grats for the KNX developers/mainteners.
My implementation extends RFLinkCover and is very specific for RTS covers (a.k.a. Somfy covers).
It works better with wait_for_ack: false (disabled).
# RFLink component
rflink:
port: /dev/serial/by-id/usb-1234_USB2.0-Serial-abcd-port0
wait_for_ack: false
If not setted, every command can take up to 4 seconds to execute and some commands can get lost, executed when cover is stoped or whatever.
You must configure the travel times (in seconds) and the MY position (0-100 where 0 is closed and 100 open). The MY position is used to calculate the cover position.
- platform: rts_rflink
devices:
RTS_0A8720_0:
name: enanos
rts_my_position: 10
travelling_time_down: 14
travelling_time_up: 15
aliases:
- rts_31e53f_01
- rts_32e53f_01
- RTS_32E542_0