You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
To whom it concerns:
It looks like the IP is locked and I can not generate the HDL wrapper.
Thanks
Jinsan Ko
create_bd_cell: Time (s): cpu = 00:00:17 ; elapsed = 00:00:18 . Memory (MB): peak = 1665.562 ; gain = 524.281
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'MMCM_CLKFBOUT_MULT_F' from '12.000' to '24.000' has been ignored for IP 'clk_wiz_1'
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'MMCM_CLKIN1_PERIOD' from '10.000' to '20.002' has been ignored for IP 'clk_wiz_1'
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'MMCM_CLKIN2_PERIOD' from '10.000' to '10.0' has been ignored for IP 'clk_wiz_1'
INFO: [Device 21-403] Loading part xczu9eg-ffvb1156-2-e
WARNING: [IP_Flow 19-2162] IP 'design_1_mipi_csi2_rx_subsystem_0_0' is locked:
IP 'design_1_mipi_csi2_rx_subsystem_0_0' requires one or more mandatory licenses but no valid licenses were found. However license checkpoints may prevent use of this IP in some tool flows.
Please select 'Report IP Status' from the 'Tools/Report' menu or run Tcl command 'report_ip_status' for more information.
create_bd_cell: Time (s): cpu = 00:00:09 ; elapsed = 00:00:11 . Memory (MB): peak = 1833.113 ; gain = 146.922
ERROR: [BD 41-542] Parameter cannot be set on a locked block. The block 'mipi_csi2_rx_subsystem_0' is locked, because: * IP 'design_1_mipi_csi2_rx_subsystem_0_0' requires one or more mandatory licenses but no valid licenses were found. However license checkpoints may prevent use of this IP in some tool flows.
Please select 'Report IP Status' from the 'Tools/Report' menu or run Tcl command 'report_ip_status' for more information.
INFO: [Common 17-17] undo 'set_property'
ERROR: [Common 17-39] 'set_property' failed due to earlier errors.
The text was updated successfully, but these errors were encountered:
To whom it concerns:
It looks like the IP is locked and I can not generate the HDL wrapper.
Thanks
Jinsan Ko
create_bd_cell: Time (s): cpu = 00:00:17 ; elapsed = 00:00:18 . Memory (MB): peak = 1665.562 ; gain = 524.281
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'MMCM_CLKFBOUT_MULT_F' from '12.000' to '24.000' has been ignored for IP 'clk_wiz_1'
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'MMCM_CLKIN1_PERIOD' from '10.000' to '20.002' has been ignored for IP 'clk_wiz_1'
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'MMCM_CLKIN2_PERIOD' from '10.000' to '10.0' has been ignored for IP 'clk_wiz_1'
INFO: [Device 21-403] Loading part xczu9eg-ffvb1156-2-e
WARNING: [IP_Flow 19-2162] IP 'design_1_mipi_csi2_rx_subsystem_0_0' is locked:
Please select 'Report IP Status' from the 'Tools/Report' menu or run Tcl command 'report_ip_status' for more information.
create_bd_cell: Time (s): cpu = 00:00:09 ; elapsed = 00:00:11 . Memory (MB): peak = 1833.113 ; gain = 146.922
ERROR: [BD 41-542] Parameter cannot be set on a locked block. The block 'mipi_csi2_rx_subsystem_0' is locked, because: * IP 'design_1_mipi_csi2_rx_subsystem_0_0' requires one or more mandatory licenses but no valid licenses were found. However license checkpoints may prevent use of this IP in some tool flows.
Please select 'Report IP Status' from the 'Tools/Report' menu or run Tcl command 'report_ip_status' for more information.
INFO: [Common 17-17] undo 'set_property'
ERROR: [Common 17-39] 'set_property' failed due to earlier errors.
The text was updated successfully, but these errors were encountered: