-
-
Notifications
You must be signed in to change notification settings - Fork 132
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
All communication stopped #1262
Comments
if the firmware version is the only thing you changed, then this is not an ebusd issue, so use the appropriate repo for that please: https://github.com/john30/ebusd-esp32 |
I actually changed the ebusd version to 23.3 as well. |
you might as well just have several instances of ebusd running |
Description
Running the v5 of the adapter wit latest firmware 20-4-2024 and 23.3 of ebusd my heatpump (Arotherm) stopped working.
Actual behavior
All communication on the ebus was blocked (adapter?)
The thermostat showed a communication error as well as the Unitower (Hwc part of the heatpump), I guess the the pump itself wasn't able to communicate either.
Expected behavior or better typical behavior
Every few minutes I get bus_errors in the log (SYN received, read timeout and signal lost).
2024-04-24 07:21:18.627 [main notice] scan completed 2 time(s), check again
2024-04-24 07:22:28.637 [main notice] scan completed 3 time(s), check again
2024-04-24 07:23:38.646 [main notice] scan completed 4 time(s), check again
2024-04-24 07:24:48.657 [main notice] scan completed 5 time(s), check again
2024-04-24 07:25:58.666 [main notice] scan completed 6 time(s), end
2024-04-24 07:26:05.192 [bus error] signal lost
2024-04-24 07:38:55.187 [bus error] poll vwzio BuildingCircuitWaterPressure failed: ERR: SYN received
2024-04-24 07:41:49.115 [bus error] poll vwzio TemperatureSwitchElectricHeater failed: ERR: SYN received
2024-04-24 07:45:07.118 [bus error] poll ctlv2 Hc3Status failed: ERR: SYN received
2024-04-24 07:46:07.577 [bus error] poll ctlv2 HwcStorageTemp failed: ERR: SYN received
ebusd version
23.3
ebusd arguments
ebusd --foreground --mqtthost=core-mosquitto --mqttport=1883 --mqttuser=usr --mqttpass=*** --scanconfig --mqttjson --configpath=/config/ebusconf --latency=200 --pollinterval=5 --mqttint=/config/ebusconf/mqtt-hassio.cfg --mqtttopic=ebusd --device=ens:192.168.1.127:9999 --log=all:notice --log=main:notice --log=bus:error --log=update:error --log=network:error --log=other:error
Operating system
Home Assistant OS (HA Yellow, latest OS, etc).
CPU architecture
arm64
Dockerized
Add-in (Lukas Grebe - Ebusd Edge)
Hardware interface
Adapter Shield v5 via WiFi
Related integration
MQTT Home Assistant via mqtt-hassio.cfg
Logs
2024-04-24 07:01:35.057 [bus error] poll vwzio DCFSignalState failed: ERR: SYN received
2024-04-24 07:01:41.066 [bus error] poll vwzio FlowPressure failed: ERR: SYN received
2024-04-24 07:01:47.110 [bus error] poll vwzio HwcTemp failed: ERR: SYN received
2024-04-24 07:01:53.060 [bus error] poll vwzio ImmersionHeaterHours failed: ERR: SYN received
2024-04-24 07:01:59.057 [bus error] poll vwzio ImmersionHeaterPower failed: ERR: SYN received
2024-04-24 07:02:05.056 [bus error] poll vwzio ImmersionHeaterPowerLimit failed: ERR: SYN received
2024-04-24 07:02:11.048 [bus error] poll vwzio ImmersionHeaterStarts failed: ERR: SYN received
2024-04-24 07:02:17.091 [bus error] poll vwzio ImmersionHeaterTemp failed: ERR: SYN received
2024-04-24 07:02:23.065 [bus error] poll vwzio OutdoorTemp failed: ERR: SYN received
2024-04-24 07:02:29.078 [bus error] poll vwzio ReturnTemp failed: ERR: SYN received
2024-04-24 07:02:35.084 [bus error] poll vwzio RunDataBuildingCircuitPumpPower failed: ERR: SYN received
2024-04-24 07:02:41.088 [bus error] poll vwzio RunDataCondensorOutletTemp failed: ERR: SYN received
2024-04-24 07:02:47.057 [bus error] poll vwzio RunDataReturnFlowTemp failed: ERR: SYN received
2024-04-24 07:02:53.067 [bus error] poll vwzio RunDataSupplyFlowTemp failed: ERR: SYN received
2024-04-24 07:02:59.076 [bus error] poll vwzio RunDataSystemPressure failed: ERR: SYN received
2024-04-24 07:03:05.076 [bus error] poll vwzio RunStatsBuildingCircuitPumpHours failed: ERR: SYN received
2024-04-24 07:03:17.413 [bus error] poll vwzio RunStatsHcHours failed: ERR: SYN received
2024-04-24 07:03:28.460 [bus error] poll vwzio RunStatsImmersionHeaterHours failed: ERR: SYN received
2024-04-24 07:03:45.166 [bus error] poll vwzio RunStatsImmersionHeaterStarts failed: ERR: SYN received
2024-04-24 07:03:45.213 [bus error] poll vwzio RunStatsVWZHours failed: ERR: SYN received
2024-04-24 07:03:51.058 [bus error] poll vwzio State00 failed: ERR: SYN received
2024-04-24 07:04:03.082 [bus error] poll vwzio State07 failed: ERR: SYN received
2024-04-24 07:04:09.068 [bus error] poll vwzio Statuscode failed: ERR: SYN received
2024-04-24 07:04:15.063 [bus error] poll vwzio SupplyTemp failed: ERR: SYN received
2024-04-24 07:04:21.068 [bus error] poll vwzio SupplyTempImmersionHeater failed: ERR: SYN received
2024-04-24 07:04:27.103 [bus error] poll vwzio TemperatureSwitchElectricHeater failed: ERR: SYN received
2024-04-24 07:04:33.049 [bus error] poll vwzio TotalEnergyUsageImmersionHeater failed: ERR: SYN received
2024-04-24 07:04:39.085 [bus error] poll ctlv2 AdaptHeatCurve failed: ERR: SYN received
2024-04-24 07:04:45.048 [bus error] poll ctlv2 CoolingOutsideTempThreshold failed: ERR: SYN received
2024-04-24 07:04:51.081 [bus error] poll ctlv2 DisplayedOutsideTemp failed: ERR: SYN received
2024-04-24 07:04:57.084 [bus error] poll ctlv2 Hc1ActualFlowTempDesired failed: ERR: SYN received
2024-04-24 07:05:03.078 [bus error] poll ctlv2 Hc1DesiredSetbackTemp failed: ERR: SYN received
2024-04-24 07:05:09.083 [bus error] poll ctlv2 Hc1DesiredTemp failed: ERR: SYN received
2024-04-24 07:05:15.073 [bus error] poll ctlv2 Hc1ExcessTemp failed: ERR: SYN received
2024-04-24 07:05:21.071 [bus error] poll ctlv2 Hc1FlowTemp failed: ERR: SYN received
2024-04-24 07:05:27.080 [bus error] poll ctlv2 Hc1HeatCurve failed: ERR: SYN received
2024-04-24 07:05:33.085 [bus error] poll ctlv2 Hc1HeatCurveAdaption failed: ERR: SYN received
2024-04-24 07:05:39.077 [bus error] poll ctlv2 Hc1MaxHeatingFlowTempDesired failed: ERR: SYN received
2024-04-24 07:05:45.076 [bus error] poll ctlv2 Hc1MinCoolingFlowTempDesired failed: ERR: SYN received
2024-04-24 07:07:45.935 [bus error] poll ctlv2 Hc1MinHeatingFlowTempDesired failed: ERR: SYN received
2024-04-24 07:07:45.981 [bus error] poll ctlv2 Hc1PumpStatus failed: ERR: SYN received
2024-04-24 07:07:51.080 [bus error] poll ctlv2 Hc1RoomTempMod failed: ERR: SYN received
2024-04-24 07:08:43.650 [bus error] poll ctlv2 Hc1SetBackMode failed: ERR: SYN received
2024-04-24 07:08:46.602 [bus error] poll ctlv2 Hc1Status failed: ERR: SYN received
2024-04-24 07:08:49.064 [bus error] poll ctlv2 Hc1SummerTempLimit failed: ERR: SYN received
2024-04-24 07:08:55.085 [bus error] poll ctlv2 Hc3ActualFlowTempDesired failed: ERR: SYN received
2024-04-24 07:09:25.817 [bus error] poll ctlv2 Hc3DesiredSetbackTemp failed: ERR: SYN received
2024-04-24 07:09:46.597 [bus error] poll ctlv2 Hc3DesiredTemp failed: ERR: SYN received
2024-04-24 07:09:46.642 [bus error] poll ctlv2 Hc3ExcessTemp failed: ERR: SYN received
2024-04-24 07:09:52.049 [bus error] poll ctlv2 Hc3FlowTemp failed: ERR: SYN received
2024-04-24 07:09:58.086 [bus error] poll ctlv2 Hc3HeatCurve failed: ERR: SYN received
The text was updated successfully, but these errors were encountered: