diff --git a/hw/bsp/nordic_pca10059/readme.md b/hw/bsp/nordic_pca10059/readme.md
new file mode 100644
index 0000000000..a8ebe6ca3e
--- /dev/null
+++ b/hw/bsp/nordic_pca10059/readme.md
@@ -0,0 +1,93 @@
+<!--
+#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+#  KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+-->
+
+# PCA10059: NRF52840 USB dongle
+
+## Flashing application without debugger
+
+Board comes from factory with Nordic DFU Bootloader that does not recognize images created by **newt** tool.
+
+Board with Nordic bootloader can be programmed using Nordic's [**nrfutil**](https://www.nordicsemi.com/Products/Development-tools/nRF-Util).
+
+Here are steps to flash mynewt application:
+
+1. Flash map of the application must be changed to match what Nordic bootloader expects.
+Here is example target file with flash map suitable for Nordic bootloader.
+target file: *targets/nordic_pca10059-blehci_nrf52dfu*
+```yml
+target.app: "@apache-mynewt-nimble/apps/blehci"
+target.bsp: "@apache-mynewt-core/hw/bsp/nordic_pca10059"
+target.build_profile: debug
+
+bsp.flash_map:
+    areas:
+        # NRF52 MBR area.
+        FLASH_AREA_MBR:
+            user_id: 20
+            device: 0
+            offset: 0x00000000
+            size: 4kB
+        # NRF52 bootloader ara.
+        FLASH_AREA_NRF52_BOOTLOADER:
+            user_id: 21
+            device: 0
+            offset: 0x000E0000
+            size: 128kB
+        # mynewt image
+            FLASH_AREA_IMAGE_0:
+            device: 0
+            offset: 0x00001000
+            size: 396kB
+
+        # User areas.
+        FLASH_AREA_REBOOT_LOG:
+            user_id: 0
+            device: 0
+            offset: 0x000C8000
+            size: 16kB
+        FLASH_AREA_NFFS:
+            user_id: 1
+            device: 0
+            offset: 0x000CC000
+            size: 16kB
+```
+**FLASH_AREA_MBR** and **FLASH_AREA_NRF52_BOOTLOADER** are here to denote flash area not available to mynewt.
+
+**FLASH_AREA_IMAGE_0** must start from **<span style="color:blue">0x1000</span>**
+
+2. Build application with newt tool:
+```shell
+    newt build nordic_pca10059-blehci_nrf52dfu
+```
+3. Create hex file needed by nrfutil:
+```shell
+    cd bin/targets/nordic_pca10059-blehci_nrf52dfu/app/@apache-mynewt-nimble/apps/blehci/
+    arm-none-eabi-objcopy -O ihex blehci.elf blehci.hex
+```
+4. Create package zip file for nrfutil:
+```shell
+    nrfutil pkg generate --hw-version 52 --sd-req 0 --application blehci.hex --application-version 1 blehci_nrf52dfu_package.zip
+```
+5. Enter bootloader mode by clicking reset button while user button is held. When Nordic Open DFU Bootloader is activated board red LED starts to blink and serial port is visible in the host system (**COM***x* for Windows or **/dev/ttyACM***x* for Linux).
+6. Flash application package with nrfutil:
+```shell
+    nrfutil dfu usb-serial -p /dev/ttyACM0 --package blehci_nrf52dfu_package.zip
+```