Replies: 9 comments 4 replies
-
|
Don't use the management software that's for factory firmware. Instead flashfloppy works with image files on a fat formatted usb drive. So you need to copy some compatible image files onto a USB drive. |
Beta Was this translation helpful? Give feedback.
-
|
I tried just copying it into a formatted flashdrive and it's still giving me an 'illegal drive number error' when I try to do a dir :1The green LED lights up and the LED display flashes a few numbers and then settles to '000'BTW, if you don't use virt disks how do you distinguish between image files?
Thanks.
On Sunday, December 11, 2022 at 11:31:31 AM CST, Keir Fraser ***@***.***> wrote:
Don't use the management software that's for factory firmware. Instead flashfloppy works with image files on a fat formatted usb drive. So you need to copy some compatible image files onto a USB drive.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Number your files 000.img 001.img etc (or whatever file extension is correct for trs80 image files) and since they are sorted into alphanumeric order they will automatically be assigned to slots 000 001 and so on. |
Beta Was this translation helpful? Give feedback.
-
|
Beyond that your problem is likely that your image files are not compatible for this system. Or if they are maybe try converting to hfe image format using hxc tools. You will need to Google up a bit on trs80 gotek setup. |
Beta Was this translation helpful? Give feedback.
-
|
Yep, I tried that. I have 4 files on my flash drive..2 dsk images, 1 ff.cfg, and an img.cfgI still get an 'illegal drive number' error on the model 3 if I do a 'dir :1'The odd thing is I see the Gotek being accessed prior to the error (i.e. the green led turns on, andthe red leds change numbers, etc). I have no idea why/what's not working.
On Sunday, December 11, 2022 at 11:31:31 AM CST, Keir Fraser ***@***.***> wrote:
Don't use the management software that's for factory firmware. Instead flashfloppy works with image files on a fat formatted usb drive. So you need to copy some compatible image files onto a USB drive.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
There are plenty of reasons it can not work, since if any part of setup isn't correct then of course it doesn't work at all. Perhaps the host isn't correctly set up? https://torlus.com/floppy/forum/viewtopic.php?t=1871 |
Beta Was this translation helpful? Give feedback.
-
|
Hi Keir, Sorry if this isn't the right email but can I ask a couple questions about an "older" version of Grease Weazel?
Thanks,-Jeff
On Sunday, December 11, 2022 at 12:25:53 PM CST, Keir Fraser ***@***.***> wrote:
Number your files 000.img 001.img etc (or whatever file extension is correct for trs80 image files) and since they are sorted into alphanumeric order they will automatically be assigned to slots 000 001 and so on.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Yes
…On Wed, 10 Apr 2024, 23:20 JeffH2022, ***@***.***> wrote:
Hi Keir, Sorry if this isn't the right email but can I ask a couple
questions about an "older" version of Grease Weazel?
Thanks,-Jeff
On Sunday, December 11, 2022 at 12:25:53 PM CST, Keir Fraser ***@***.***>
wrote:
Number your files 000.img 001.img etc (or whatever file extension is
correct for trs80 image files) and since they are sorted into alphanumeric
order they will automatically be assigned to slots 000 001 and so on.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub
<#727 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAGWZFVZVAXZA4OOFDN57XLY4W3MPAVCNFSM6AAAAAAS3DDDV2VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TANZWHEZTK>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Actually I was going to ask via email but you answered on FB
Yahoo Mail: Search, Organize, Conquer
On Thu, Apr 11, 2024 at 1:35 AM, Keir ***@***.***> wrote:
Yes
On Wed, 10 Apr 2024, 23:20 JeffH2022, ***@***.***> wrote:
Hi Keir, Sorry if this isn't the right email but can I ask a couple
questions about an "older" version of Grease Weazel?
Thanks,-Jeff
On Sunday, December 11, 2022 at 12:25:53 PM CST, Keir Fraser ***@***.***>
wrote:
Number your files 000.img 001.img etc (or whatever file extension is
correct for trs80 image files) and since they are sorted into alphanumeric
order they will automatically be assigned to slots 000 001 and so on.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub
<#727 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAGWZFVZVAXZA4OOFDN57XLY4W3MPAVCNFSM6AAAAAAS3DDDV2VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TANZWHEZTK>
.
You are receiving this because you commented.Message ID:
***@***.***>
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
@keirf Could you also add mention to wiki (https://github.com/keirf/flashfloppy/wiki/Initial-Setup#usb-storage) that drive needs to be partitioned using MBR partitions. (At least disks formatted with gnome-disks under Fedora 40 seem to use GPT by default). |
Beta Was this translation helpful? Give feedback.
-
|
FlashFloppy can read GPT partitioned drives. |
Beta Was this translation helpful? Give feedback.
-
|
Weird, I had also issues getting drive recognized by FF, so today I got a known working USB drive from a friend, saw that it was using MBR partitions and after converting my flash drive to use MBR things started working. |
Beta Was this translation helpful? Give feedback.
-
|
Cool. But what does that help with exactly?
Yahoo Mail: Search, Organize, Conquer
On Thu, Oct 10, 2024 at 2:07 PM, Keir ***@***.***> wrote:
FlashFloppy can read GPT partitioned drives.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
OK, here is my setup. I have a TRS80 - model 3, FD0 is a real floppy drive that seems to work fine, FD1 is the Gotek. I flashed the flashfloppy firmware and it says F-F when I boot. I took a flashdrive and used the USB_Foppy_Manager_v1.4i to format the flash and
create 100 virt disks. I copied FF.CFG in to the root (it put it in DISK00) and put a DSK file in DISK00 as well. When I boot the TRS80
the Gotek get power and settles to 000. However if I do a dir :0 I see the bootdisk (real disk) directory, but if I do a dir :1 I
get an illegal drive error. On a prior flash I also got a E01 error. What am I doing wrong? It seems like the problem is in the
flashdrive (by the way, I did setup the FF.CFG explicitly to shugart)?
Thanks.
Beta Was this translation helpful? Give feedback.
All reactions