esxi-70u3n-advanced-settings.md

ESXi 7.0 Update 3n Build 21930508 Advanced Settings

Total: 1189

Name	Description	Default	Current	Min	Max	ESXCLI
BufferCache.FlushInterval	Flush at this interval (milliseconds)	30000	30000	100	3600000	True
BufferCache.HardMaxDirty	Block writers if this many buffers are dirty (percent)	95	95	0	100	True
BufferCache.PerFileHardMaxDirty	Block writers if this many buffers of a given file are dirtied (percent)	50	50	0	100	True
BufferCache.SoftMaxDirty	Flush immediately if this many buffers are dirty (percent)	15	15	0	100	True
CBRC.DCacheMemReserved	Memory consumed by CBRC Data Cache (in MB)	400	400	100	32768	True
CBRC.Enable	Enable Content Based Read Cache	False	False	N/A	N/A	False
COW.COWMaxHeapSizeMB	Maximum size (in MB) to which the COW heap is allowed to grow	192	192	192	256	True
COW.COWMaxREPageCacheszMB	Maximum size (in MB) of VMFSSparse metadata cache size before cache eviction kicks in	256	256	32	512	True
COW.COWMinREPageCacheszMB	Minimum size (in MB) of VMFSSparse metadata cache size. Valid when cache eviction is enabled.	0	0	0	512	True
COW.COWREPageCacheEviction	VMFSSparse metadata cache eviction: 0 - disabled, 1 enabled	1	1	0	1	True
Config.Defaults.host.TAAworkaround	Enable mitigation of TSX Asynchronous Abort (CVE-2019-11135).	True	True	N/A	N/A	False
Config.Defaults.monitor.if_pschange_mc_workaround	Enable workaround for Machine Check Error on Page Size Change (CVE-2018-12207).	False	False	N/A	N/A	False
Config.Defaults.security.host.ruissl	Require SSL to be used when communicating with the host over port 902.	True	True	N/A	N/A	False
Config.Defaults.vGPU.consolidation	Assignment policy to place shared passthru graphics VMs on same physical GPU until full.	False	False	N/A	N/A	False
Config.Etc.issue	Messages that are displayed prior to an SSH or local shell login.			N/A	N/A	False
Config.Etc.motd	Messages that are displayed following an SSH or local shell login.		TOO LONG TO PRINT	N/A	N/A	False
Config.GlobalSettings.guest.commands.sharedPolicyRefCount	Reference count to enable guest operations.	0	0	N/A	N/A	False
Config.HostAgent.distributedTracing	Logging level for the loggers related to distributed tracing services.		none	N/A	N/A	False
Config.HostAgent.level[Hbrsvc].logLevel	Logging level for the loggers related to HBR services.			N/A	N/A	False
Config.HostAgent.level[Hostsvc].logLevel	Logging level for the loggers related to Host services.			N/A	N/A	False
Config.HostAgent.level[Proxysvc].logLevel	Logging level for the loggers related to proxy services.			N/A	N/A	False
Config.HostAgent.level[Snmpsvc].logLevel	Logging level for the loggers related to SNMP services.			N/A	N/A	False
Config.HostAgent.level[Statssvc].logLevel	Logging level for the loggers related to Stats services.			N/A	N/A	False
Config.HostAgent.level[Vcsvc].logLevel	Logging level for the loggres related to VC services.			N/A	N/A	False
Config.HostAgent.level[Vimsvc].logLevel	Logging level for the loggers related to Virtual infrastructure management services.			N/A	N/A	False
Config.HostAgent.level[Vmsvc].logLevel	Logging level for the loggers related to VM services.		verbose	N/A	N/A	False
Config.HostAgent.log.level	Controls the global log level.		info	N/A	N/A	False
Config.HostAgent.plugins.hostsvc.esxAdminsGroup	Active Directory group name that is automatically granted administrator privileges on the ESX. NOTE: Changing the group name does not remove the permissions of the previous group.	ESX Admins	ESX Admins	N/A	N/A	False
Config.HostAgent.plugins.hostsvc.esxAdminsGroupAutoAdd	Controls whether the group specified by 'esxAdminsGroup' is automatically granted administrator permission. NOTE: Changing this to false does not remove any permissions already granted to the group.	True	True	N/A	N/A	False
Config.HostAgent.plugins.hostsvc.esxAdminsGroupUpdateInterval	Interval between checks for whether the group specified by 'esxAdminsGroup' has appeared in Active Directory, in minutes.	1	1	N/A	N/A	False
Config.HostAgent.plugins.solo.enableMob	Enables or disables the Debug Managed Object Browser for the ESXi host.	False	False	N/A	N/A	False
Config.HostAgent.plugins.solo.webServer.enableWebscriptLauncher	Controls the availability of webscript launcher page.	True	True	N/A	N/A	False
Config.HostAgent.plugins.vimsvc.authValidateInterval	Number of minutes between each validation of all known users and groups - set to zero to disable validation.	1440	1440	N/A	N/A	False
Config.HostAgent.plugins.vimsvc.httpNfcLeaseTimeout	Number of seconds until an HTTP NFC lease times out due to inactivity. Applies to new leases only.	300	300	N/A	N/A	False
Config.HostAgent.plugins.vimsvc.userSearch.maxResults	Maximum number of users and groups to display in the Add Permissions dialog - set to zero to disable the limit.	100	100	N/A	N/A	False
Config.HostAgent.plugins.vimsvc.userSearch.maxTimeSeconds	Number of seconds to wait for a search for users and groups to return results - set to zero to disable the timeout.	20	20	N/A	N/A	False
Config.HostAgent.plugins.vmsvc.enforceMaxRegisteredVms	Enables enforcing the limitation on the number of registered virtual machines in the inventory.	True	True	N/A	N/A	False
Config.HostAgent.plugins.vmsvc.guestWatchdogTimeout	Number of seconds to wait for the Guest OS to shutdown.	900	900	1	3600	False
Config.HostAgent.plugins.vmsvc.productLockerWatchInterval	Interval between checks for whether the product locker files are changed, in seconds. Set to -1 to disable checks.	300	300	N/A	N/A	False
Config.HostAgent.ssl.keyStore.allowAny	Allow any certificates to be added to the host CA store. Disables CA checks.	False	False	N/A	N/A	False
Config.HostAgent.ssl.keyStore.allowSelfSigned	Allow self-signed certificates to be added to the host CA store.	False	False	N/A	N/A	False
Config.HostAgent.ssl.keyStore.discardLeaf	Discard leaf certificates when adding to CA store. Leaf certificates in a CA store are generally a misconfiguration.	True	True	N/A	N/A	False
Config.HostAgent.ticketing.thumbprintTypes	Hash algorithms with which to generate host thumbprints, specified as a comma-separated list. Options are sha1, sha256. If no hash is specified, all hashes that are considered secure are enabled.	sha1	sha1	N/A	N/A	False
Config.HostAgent.vmacore.soap.maxSessionCount	Maximum number of authenticated VIM API sessions at any given time - set to zero to disable limit.	500	500	N/A	N/A	False
Config.HostAgent.vmacore.soap.sessionTimeout	Number of minutes until a VIM API session times out due to inactivity - set to zero to disable timeout. Applies to new sessions only.	30	30	N/A	N/A	False
Cpu.AllowWideVsmp	Allow VMs with more VCPUs than host PCPUs, 0 to disable	0	0	0	1	True
Cpu.BoundLagQuanta	Number of global quanta before bound lag	8	8	1	100	True
Cpu.CommRateThreshold	threshold for inter-sched-context rate above which the contexts are considered to be related (in num/sec)	500	500	0	50000	True
Cpu.CoschedCostartThreshold	costart threshold in usec, costart threshold should be less than costopThreshold	2000	2000	0	100000	True
Cpu.CoschedCostopThreshold	maximum skew between vcpus in usec, 0 to disable	3000	3000	0	100000	True
Cpu.CoschedCrossCall	0: disable cosched on crosscall; 1: enable cosched on crosscall	1	1	0	1	True
Cpu.CoschedHandoffLLC	0: handoff by switching pcpu; 1: handoff to LLC if possible	1	1	0	1	True
Cpu.CoschedHandoffSkip	only skip handoff if ready time is smaller than this threshold, in usec, 0 to allow skip always	10	10	0	1000	True
Cpu.CoschedPollUsec	interval between coscheduling skew checks, in usec	1000	1000	1000	5000	True
Cpu.CreditAgePeriod	Period in milliseconds	3000	3000	1000	10000	True
Cpu.FairnessRebalancePcpus	max number of PCPUs to be considered when doing fairness rebalance, 0 to disable	4	4	0	32	True
Cpu.HTRebalancePeriod	average milliseconds between opportunities for a pcpu to migrate vcpus from within a core	5	5	0	5000	True
Cpu.HTStolenAgeThreshold	the amount of htStolen time a vcpu can keep without being aged (in seconds)	8	8	0	500	True
Cpu.HTWholeCoreThreshold	a vcpu with vtime falling behind by this threshold (in ms) is eligible to use the whole core (HT only), 0 to disable (may violate resource settings)	800	800	0	5000	True
Cpu.HostRebalancePeriod	average milliseconds between opportunities for a pcpu to migrate vcpus from within the whole system, 0 to disable	2000	2000	0	5000	True
Cpu.L2RebalancePeriod	average milliseconds between opportunities for a pcpu to migrate vcpus from within the shared L2 cache, 0 to disable	10	10	0	5000	True
Cpu.L3RebalancePeriod	average milliseconds between opportunities for a pcpu to migrate vcpus from within the shared L3 cache, 0 to disable	20	20	0	5000	True
Cpu.LimitEnforcementThreshold	Only allows low-vtime children ro run when a group/VM's vtimeLimit is smaller than the global virtual time by less than this threshold (in ms), 0 to disable	200	200	0	10000	True
Cpu.MaxSampleRateLg	Sampling system services at most (2^MaxSampleRateLg) times a second	7	7	1	15	True
Cpu.NonTimerWakeupRate	Disable P state if the running vcpu's non-timer wakeup rate is higher than this threshold, 0 to disable	500	500	0	5000	True
Cpu.PackageRebalancePeriod	average milliseconds between opportunities for a pcpu to migrate vcpus from within a package, 0 to disable	2000	2000	0	5000	True
Cpu.PcpuMigrateIdlePcpus	max number of PCPUs to be considered when doing pcpu idle rebalance, 0 to disable	4	4	0	32	True
Cpu.Quantum	Quantum in milliseconds	200	200	1	1000	True
Cpu.UseMwait	use MWAIT vs. HLT in the idle loop; 0: use HLT, 1: use MWAIT if possible, 2: choose by cpu type	2	2	0	3	True
Cpu.VMAdmitCheckPerVcpuMin	Perform additional admission control check that per virtual CPU virtual machine minimum does not exceed the speed of a single physical CPU	1	1	0	1	True
Cpu.WakeupMigrateIdlePcpus	max number of PCPUs to be considered when doing wakeup idle rebalance, 0 to disable	4	4	0	32	True
DCUI.Access	One or more comma-separated local users which are granted unconditional access to DCUI, even if they don't have administrator role on the host.	root	root	N/A	N/A	False
DataMover.HardwareAcceleratedInit	Enable hardware accelerated VMFS data initialization (requires compliant hardware)	1	1	0	1	True
DataMover.HardwareAcceleratedMove	Enable hardware accelerated VMFS data movement (requires compliant hardware)	1	1	0	1	True
DataMover.MaxHeapSize	Maximum size of the heap in MB used for data movement	64	64	16	256	True
Digest.AlgoType	Digest Crypto Hash Type (1=SHA-1, 2=SHA-256).	1	1	1	2	True
Digest.BlockSize	Blocksize in the original VMDK to compute crypto hash codes. In pages of 4K size. Value needs to be power of 2.	1	1	1	2	True
Digest.CollisionEnabled	Enable collision detection (0=disabled, 1=enabled)	0	0	0	1	True
DirentryCache.MaxDentryPerObj	Maximum directory entries cached per directory	15000	15000	60	30000	True
Disk.AllowUsbClaimedAsSSD	Permit claim rules to mark USB disks as SSD	0	0	0	1	True
Disk.ApdTokenRetryCount	APD Token Retry Count	25	25	10	99999	True
Disk.AutoremoveOnPDL	Autoremove paths to a disk that is in PDL (Permanent Device Loss)	1	1	0	1	True
Disk.BandwidthCap	cap on disk bandwidth (KB/s) usage	4294967294	4294967294	10	4294967294	True
Disk.DelayOnBusy	Delay in milliseconds for completion of commands with a BUSY status	400	400	0	5000	True
Disk.DeviceEnableIOLatencyMsgs	Enable or disable storage latency-related error messages from PSA	0	0	0	1	True
Disk.DeviceReclaimTime	The number of seconds between device re-claim attempts	300	300	0	31536000	True
Disk.Disable4knSSD	Disable use of 4kn SSDs	1	1	0	1	True
Disk.DiskDelayPDLHelper	Delay PDL helper in secs	10	10	0	300	True
Disk.DiskMaxIOSize	Max Disk READ/WRITE I/O size before splitting (in KB)	32767	32767	32	32767	True
Disk.DiskReservationThreshold	Time window within which refcounted reservations on a device are permitted (in msec)	45	45	0	3000	True
Disk.DiskRetryPeriod	Retry period in milliseconds for a command with retry status	2000	2000	500	50000	True
Disk.DumpMaxRetries	Max number of I/O retries during disk dump	10	10	0	1000	True
Disk.DumpPollDelay	Number of microseconds to wait between polls during a disk dump.	1000	1000	1	100000	True
Disk.DumpPollMaxRetries	Max number of device poll retries during disk dump	10000	10000	1	100000	True
Disk.EnableNaviReg	Enable automatic NaviAgent registration with EMC CLARiiON and Invista	1	1	0	1	True
Disk.FailDiskRegistration	Fail device registration if disk has only standby paths and supports only implicit asymmetric logical unit access.	1	1	0	1	True
Disk.FastPathRestoreInterval	Time interval (in msec) to monitor the IO latency to evaluate eligibility for fast-path in PSA.	100	100	10	1000	True
Disk.IdleCredit	Amount of idle credit that a virtual machine can gain for I/O requests	32	32	1	512	True
Disk.MaxLUN	Only LUNs with LUN ID values below this value will be scanned	1024	1024	1	4294967295	True
Disk.MaxNumIOIntervals	Maximum number of IO intervals per device that can be stored in order to detect overlapping IOs to 4Kn disks	1024	1024	64	65535	True
Disk.MaxResetLatency	Delay in milliseconds before logging warnings and spawning new reset worlds if a reset is overdue or taking too long	2000	2000	500	600000	True
Disk.NmpMaxCmdExtension	Increase the maximum number of commands to be processed at once in NMP	0	0	0	1000000000	True
Disk.PVSCSIEnablePreemption	Enable PVSCSI Preemption.	1	1	0	1	True
Disk.PathEvalTime	The number of seconds between FC path evaluations	300	300	0	31536000	True
Disk.PreventVMFSOverwrite	Prevent overwriting VMFS partitions	1	1	0	1	True
Disk.QFullSampleSize	I/O samples to monitor for detecting non-transient queue full condition. Should be nonzero to enable queue depth throttling.	0	0	0	64	True
Disk.QFullThreshold	BUSY or QFULL threshold, upon which LUN queue depth will be throttled. Should be <= QFullSampleSize if throttling is enabled.	8	8	1	16	True
Disk.ReqCallThreshold	Threshold in number of pending requests before calling into vmkernel to process the requests	8	8	1	129	True
Disk.ResetLatency	Delay in milliseconds between reset thread wakeups	1000	1000	100	600000	True
Disk.ResetMaxRetries	Maximum number of bus reset retries. Set to 0 for no limit.	0	0	0	10000	True
Disk.ResetOverdueLogPeriod	Delay in seconds between logs of overdue reset	60	60	10	86400	True
Disk.ResetPeriod	Delay in seconds between bus resets retries	30	30	1	3600	True
Disk.ResetThreadExpires	Life in seconds of an inactive reset handle thread	1800	1800	0	86400	True
Disk.ResetThreadMax	Maximum number of reset handler threads	16	16	1	16	True
Disk.ResetThreadMin	Minimum number of reset handler threads	1	1	1	16	True
Disk.RetryUnitAttention	Retry all SCSI commands that return a unit attention error	1	1	0	1	True
Disk.ReturnCCForNoSpace	Return CC 0x7/0x27/0x7 in the event where a backing datastore has run out of space as opposed to posting a monitor event to halt the VM	0	0	0	1	True
Disk.SchedCostUnit	IO Scheduler block size for accounting	32768	32768	4096	262144	True
Disk.SchedQCleanupInterval	Time interval (in secs) to cleanup per device unused schedQ list (default = 5 minutes).	300	300	0	31536000	True
Disk.SchedQControlSeqReqs	Number of consecutive requests from a virtual machine required to raise the outstanding commands to maximum	128	128	0	2048	True
Disk.SchedQControlVMSwitches	Number of switches between commands issued by different virtual machines required to reduce outstanding commands to CONFIG_DISK_CIF	6	6	0	2048	True
Disk.SchedQPriorityPercentage	Percentage of priority commands to serve from priority queue	80	80	10	100	True
Disk.SchedQuantum	Number of consecutive requests from one world	8	8	1	64	True
Disk.SchedReservationBurst	Permit I/O bursts in mclock scheduler with reservations.	1	1	0	1	True
Disk.SchedulerWithReservation	Disk I/O scheduler (0:default 1:mclock)	1	1	0	1	True
Disk.SectorMaxDiff	Distance in sectors at which the disk BW schedules affinity stops	2000	2000	0	2000000	True
Disk.SharesHigh	Shares for high disk priority	2000	2000	100	10000	True
Disk.SharesLow	Shares for low disk priority	500	500	100	10000	True
Disk.SharesNormal	Shares for normal disk priority	1000	1000	100	10000	True
Disk.SkipResetNoCIF	Do not send Device/Virt RESET if No Cmds in Flight	1	1	0	1	True
Disk.SllThrottleTime	Time (in msecs) I/Os to SLLs will be throttled in the event of a TASK_SET_FULL being received.	800	800	25	3000	True
Disk.SupportSparseLUN	Support for sparse LUNs if set to one	1	1	0	1	True
Disk.ThroughputCap	Cap on disk throughput (IO/s) usage	4294967294	4294967294	10	4294967294	True
Disk.UseDeviceReset	Use device reset (instead of bus reset) to reset a SCSI device	1	1	0	1	True
Disk.UseIoPool	A bitmask: 0x1 - adapter submission pool, 0x2 - device completion pool, 0x4 - device queueing pool.	0	0	0	7	True
Disk.UseLunReset	Use LUN reset (instead of device.bus reset) to reset a SCSI device	1	1	0	1	True
Disk.UseReportLUN	Use the REPORT LUN command to increase scanning speed for devices	1	1	0	1	True
Disk.VSCSICoalesceCount	Frequency with which the coalesce callback is called.	1000	1000	0	100000	True
Disk.VSCSIDisableNvmeRetry	Disable vNVME Retries in VSCSI.	1	1	0	1	True
Disk.VSCSIHaltPollInterval	When vCPU halt we poll VSCSI vHBAs for work, but at most do so this often. Time is in microseconds.	5	5	1	1000	True
Disk.VSCSIPollPeriod	Time in microseconds between VSCSI polls.	1000	1000	1	99999999	True
Disk.VSCSIResvCmdRetryInSecs	Time (in secs) to retry on transient errors for Reservation commands for MSCS CAB configs.	1	1	1	60	True
Disk.VSCSIWriteSameBurstSize	Max number of split IOs per write same request.	4	4	1	4	True
FSS.FSSLightWeightProbe	Enable light-weight efficient probe of ESX supported datastores	1	1	0	1	True
FT.AckIntervalMax	Maximum time in microseconds between acks	1000000	1000000	1000000	4000000	True
FT.AckIntervalMin	Minimum time in microseconds between acks	0	0	0	100000	True
FT.BackupConnectTimeout	Time in milliseconds to wait for the backup to connect	8000	8000	100	30000	True
FT.BackupExtraTimeout	Extra milliseconds before backup declares primary dead	100	100	0	30000	True
FT.BadExecLatency	Latency considered bad execution latency(ms)	800	800	0	10000	True
FT.BindToVmknic	Bind the FT socket to a specific vmknic	0	0	0	1	True
FT.ChargeVMXForFlush	Charge the VMX world for log flushing instead of the global flush world	1	1	0	1	True
FT.CheckFCPathState	Check storage path state	1	1	0	1	True
FT.CheckForProgress	Check for progress on the backup and/or primary	0	0	0	1	True
FT.CoreDumpNoProgressMS	Milliseconds before live coredump vmm and vmx if progress isn't made	0	0	0	10000	True
FT.ExecLatencyKill	Time to wait for good latency before killing a slow backup(ms)	0	0	0	100000	True
FT.ExtraLogTimeout	Time in milliseconds for temporary increase in timeout	10000	10000	500	300000	True
FT.FTCptConcurrentSend	Send non-diff pages in parallel with diffing rather than after	1	1	0	1	True
FT.FTCptDelayCheckpoint	Delay checkpoint if no network packet waiting	2	2	0	2	True
FT.FTCptDiffCap	Max percent pages via diffs (EXPERIMENTAL, failover will not work if not 100)	100	100	0	100	True
FT.FTCptDiffThreads	Number of threads for diffing pages	6	6	1	16	True
FT.FTCptDisableFailover	Disable failovers (testing only)	0	0	0	6	True
FT.FTCptDiskWriteTimeout	Time in milliseconds for backup site to wait for a disk I/O to complete	3000	3000	10	60000	True
FT.FTCptDontDelayPkts	Do not delay network packets - for testing only	0	0	0	1	True
FT.FTCptDontSendPages	Do not send over modified pages - for testing only	0	0	0	1	True
FT.FTCptEpochList	List of potential epochs to try in order of increasing value	5,10,20,100	5,10,20,100	N/A	N/A	True
FT.FTCptEpochSample	Single epoch sampling time in ms	1000	1000	1	60000	True
FT.FTCptEpochWait	Wait in ms after epoch sampling	8000	8000	1	4294967295	True
FT.FTCptIORetryExtraInterval	Extra sleep interval (in ms) between retries on disk I/O error	200	200	10	2000	True
FT.FTCptIORetryInterval	Sleep interval (in ms) between retries on disk I/O error	10	10	10	2000	True
FT.FTCptIORetryTimes	Maximum retries on disk I/O error	15	15	5	50	True
FT.FTCptLogTimeout	Time in milliseconds to wait for FT log entries (read or write)	8000	8000	500	30000	True
FT.FTCptMaxPktsDelay	Max number of packets in the delayed queue before forcing a checkpoint	0	0	0	10000	True
FT.FTCptMinInterval	Time in milliseconds to wait between two forced checkpoints	4	4	2	1000	True
FT.FTCptNetDelayNoCpt	Delay to impose on virtual machine network output in ms	0	0	0	5000	True
FT.FTCptNumConnections	# of data connections to use for page sending	2	2	1	4	True
FT.FTCptNumaIndex	Index dirty pages by NUMA node. Workers will use the index to prefer local work.	0	0	0	1	True
FT.FTCptPagePolicy	Page placement policy for side data. < 2^16: Use a specific node mask, 0x10000: Put pages anywhere, 0x10001: Match nodes with virtual machine, 0x10002: Avoid matching nodes with virtual machine	65538	65538	1	65538	True
FT.FTCptPoweroff	Power off the Primary VM after the next checkpoint	0	0	0	3	True
FT.FTCptRcvBufSize	TCP receive buffer size for the backup	562140	562140	131080	16777216	True
FT.FTCptSndBufSize	TCP send buffer size for the Primary VM	562140	562140	131080	16777216	True
FT.FTCptStartTimeout	Time in milliseconds for backup site to wait for data for the next checkpoint	90000	90000	1000	90000	True
FT.FTCptStatsInterval	Time in milliseconds between stat printing	30	30	0	600	True
FT.FTCptThreadPolicy	Policy for placing helper threads. < 2^16: Use a fixed NUMA node mask, 0x10000: Put threads anywhere, 0x10001: Match threads to a dynamic node index	65536	65536	1	65537	True
FT.FTCptVcpuMinUsage	VCPU usage in percentage below which the VM will be considered for forced checkpoint	40	40	0	100	True
FT.FTCptWaitOnSocket	Wait when socket is empty	1	1	0	1	True
FT.FlushReservationMax	The maximum amount of CPU to reserve for the async flush world	25	25	0	100	True
FT.FlushReservationMin	The minimum amount of CPU to reserve for the async flush world	5	5	0	100	True
FT.FlushSleep	Sleep time in milliseconds when nothing to flush	0	0	0	10000	True
FT.GlobalFlushWorld	Use a global async flush world	0	0	0	1	True
FT.GoodExecLatency	Latency considered good execution latency(ms)	200	200	0	10000	True
FT.HeartbeatCount	Number of failed heartbeats before declare dead.	10	10	5	20	True
FT.HostTimeout	Time in milliseconds before declare FT host dead	2000	2000	100	30000	True
FT.IORetryExtraInterval	Sleep extra interval (msec) between I/O reissuing on I/O error	200	200	10	2000	True
FT.IORetryInterval	Sleep interval (msec) between I/O reissuing on I/O error	10	10	10	2000	True
FT.IORetryTimes	Maximum disk I/O reissuing times on I/O error	15	15	5	50	True
FT.LogBufferStallSleep	Sleep time in milliseconds when log buffer is full on the primary	1	1	0	100000	True
FT.LogTimeout	Time in milliseconds to wait on log socket	8000	8000	500	30000	True
FT.LongFlushDebugMS	Long millisecond interval for debugging flushing delays	500	500	100	5000	True
FT.MaxFlushInterval	Maximum amount of microseconds to wait before writing to flush socket	0	0	0	10000	True
FT.MinWriteSize	Minimum amount of data to write to flush socket	0	0	0	65536	True
FT.NoWaitOnSocket	Don't wait on socket	0	0	0	1	True
FT.PanicNoProgressMS	Milliseconds before panic if progress isn't made	0	0	0	10000	True
FT.PrimaryConnectTimeout	Time in milliseconds to wait when connecting to the primary	8000	8000	100	30000	True
FT.ShortFlushDebugMS	Short millisecond interval for debugging flushing delays	100	100	10	5000	True
FT.TCPNoDelayBackup	Set TCP_NODELAY on the socket on the backup	1	1	0	1	True
FT.TCPNoDelayPrimary	Set TCP_NODELAY on the socket on the primary	1	1	0	1	True
FT.TCPPersistTimer	TCP persist timer time in milliseconds	500	500	500	5000	True
FT.TCPRcvBufSize	TCP receive buffer size for the backup	131072	131072	16384	1000000	True
FT.TCPSndBufSize	TCP send buffer size for the primary	131072	131072	16384	1000000	True
FT.UseHostMonitor	Use the host monitor to ping the other host	0	0	0	1	True
FT.Vmknic	Vmknic for FT vmkernel VNIC			N/A	N/A	True
FT.XmitSyncQueueLen	Length of the Tx synchronization queue	64	64	1	32768	True
FT.adjDownInt	CPU adjust down interval in seconds	10	10	3	30	True
FT.adjDownPct	CPU slowdown adjustment pct parameter	10	10	1	30	True
FT.adjUpInt	CPU adjust up interval in seconds	200	200	5	12000	True
FT.adjUpPct	CPU speedup adjustment pct parameter	10	10	1	30	True
FT.execLatExtra	Extra execution latency allowed in msec	500	500	0	3000	True
FT.maxLowerBound	CPU minimum alloc.max allowed in pct	20	20	5	50	True
FT.slowdownPctMax	Maximum primary vm CPU slowdown pct	60	60	0	90	True
FT.slowdownTimeMax	Maximum primary vm CPU slowdown duration in seconds	600	600	0	9000	True
HBR.ChecksumIoSize	Size in blocks of a checksum read I/O	8	8	1	1024	True
HBR.ChecksumMaxIo	Maximum number of I/O chunks read in parallel for checksum	8	8	1	256	True
HBR.ChecksumPerSlice	Maximum number of I/O chunks we read in each slice for checksum	2	2	1	64	True
HBR.ChecksumRegionSize	Size in blocks of one checksum region, corresponding to one network request	256	256	1	4096	True
HBR.ChecksumUseAllocInfo	Use disk allocation info to help speed up the checksum process	1	1	0	1	True
HBR.ChecksumUseChecksumInfo	Use disk checksum info to help speed up transfering valid blocks of data.	1	1	0	1	True
HBR.ChecksumZoneSize	Size in regions of one checksum zone for which allocation information will be cached	32768	32768	32	1048576	True
HBR.CopySnapDiskMaxExtentCount	Number of extents for a single snapshot disk that can be copied in parallel	16	16	1	128	True
HBR.CopySnapFidHashBuckets	Number of hash buckets to use to track the snapshot disks open to copy to demand log.	256	256	1	1024	True
HBR.DemandlogCompletedHashBuckets	Number of hash buckets to use to track extents that have been written to the demand log.	8	8	1	32	True
HBR.DemandlogExtentHashBuckets	Number of hash buckets to use to track extents that haven't been read.	512	512	1	65536	True
HBR.DemandlogIoTimeoutSecs	Timeout for IOs for demand log operations.	120	120	0	1000	True
HBR.DemandlogReadRetries	Number of times to retry an internal read (for the demand log) before aborting the delta.	20	20	0	1000	True
HBR.DemandlogRetryDelayMs	Delay in milliseconds for retrying a demand log write.	10	10	0	100000	True
HBR.DemandlogTransferIoSize	Size in blocks of a demandlog transfer read I/O	8	8	1	16	True
HBR.DemandlogTransferMaxCompletion	Maximum number of demandlog chunks that are allowed in completion phase per disk	0	0	0	512	True
HBR.DemandlogTransferMaxIo	Maximum number of demandlog transfer I/O chunks issued in parallel	32	32	1	128	True
HBR.DemandlogTransferMaxNetwork	Maximum number of demandlog chunks transferred in parallel	64	64	1	256	True
HBR.DemandlogTransferPerSlice	Maximum number of demandlog chunks issued per slice	16	16	1	128	True
HBR.DemandlogWriteRetries	Number of times to retry a demand log write before aborting the delta.	20	20	0	1000	True
HBR.DisconnectedEventDelayMs	Time to wait (while attempting reconnection) before posting a 'no connection to VR server' event	60000	60000	100	600000	True
HBR.ErrThrottleChecksumIO	Throttle Checksum I/O errors.	1	1	0	1	True
HBR.ErrThrottleDceRead	Throttle DCE Read errors.	1	1	0	1	True
HBR.HbrBitmapAllocTimeoutMS	A timeout in MS for how long we will wait to allocate a bitmap	3000	3000	0	10000	True
HBR.HbrBitmapVMMaxStorageGB	An estimation of the maximum storage allocated per VM in gigabytes	65536	65536	100	131072	True
HBR.HbrBitmapVMMinStorageGB	An estimation of the minimum storage allocated per VM in gigabytes	500	500	100	131072	True
HBR.HbrDemandLogIOPerVM	Number of concurrent demand log copies per VM	64	64	1	128	True
HBR.HbrLowerExtentBreakGB	Disks with capacity between the min extent break and this number of gigabytes will have the lower extent size.	8192	8192	1	65536	True
HBR.HbrLowerExtentSizeKB	Lower extent size used for disks in kilobytes.	16	16	1	128	True
HBR.HbrMaxExtentSizeKB	Maximum extent size in kilobytes. Used for disks with capacity over the upper extent break.	64	64	1	128	True
HBR.HbrMaxGuestXferWhileDeltaMB	Maximum single SCSI command transfer size (in megabytes) that will be tolerated while a delta is taking place.	1024	1024	256	3072	True
HBR.HbrMaxUnmapExtents	Maximum expected number of extents for SCSI UNMAP commands.	10	10	0	100000	True
HBR.HbrMaxUnmapsInFlight	Maximum expected number of SCSI UNMAP commands in flight on a single disk.	128	128	0	1048576	True
HBR.HbrMaxUpdateSizeKB	Maximum size of a single network update in kilobytes.	128	128	64	128	True
HBR.HbrMinExtentBreakGB	Disks with capacity under this number of gigabytes will have the min extent size.	2048	2048	1	65536	True
HBR.HbrMinExtentSizeKB	Minimum extent size used for disks in kilobytes.	8	8	1	128	True
HBR.HbrOptimizeFullSync	Skip transfer of changed blocks during full sync to avoid sending them twice between the full sync and the subsequent delta.	1	1	0	1	True
HBR.HbrResourceHeapPerVMSizeKB	The additional amount of memory in KB per VM to add to the resource heap size	128	128	0	4096	True
HBR.HbrResourceHeapSizeMB	A base value in MB for the size of the resource heap	3	3	2	256	True
HBR.HbrResourceHeapUtilization	Expected usable percentage of the resource heap (minus overheads, fragmentation)	95	95	1	200	True
HBR.HbrResourceMaxCompletionContexts	The maximum number of resource contexts allowed in completion phase for all VMs.	8192	8192	16	16384	True
HBR.HbrResourceMaxDiskContexts	The maximum number of resource contexts allowed in disk phase for all VMs.	16	16	16	8192	True
HBR.HbrRuntimeHeapMaxBaseMB	A base value in MB for the maximum size of the runtime heap	1	1	1	128	True
HBR.HbrRuntimeHeapMinBaseMB	A base value in MB for the minimum size of the runtime heap	1	1	1	128	True
HBR.HbrStaticHeapMaxBaseMB	A base value in MB for the maximum size of the static heap	1	1	1	128	True
HBR.HbrStaticHeapMinBaseMB	A base value in MB for the minimum size of the static heap	1	1	1	128	True
HBR.HbrThrottleGenericErrResetTime	Time in MS between the last logged generic HBR error and the throttle reset.	16384	16384	0	65536	True
HBR.HbrUpperExtentBreakGB	Disks with capacity between the lower extent break and this number of gigabytes will have the upper extent size.	32768	32768	1	65536	True
HBR.HbrUpperExtentSizeKB	Upper extent size used for disks in kilobytes.	32	32	1	128	True
HBR.HelperQueueMaxRequests	Maximum number of helper requests the helper queue can support	8192	8192	128	16384	True
HBR.HelperQueueMaxWorlds	Maximum number of world processing helper queue requests	8	8	1	16	True
HBR.LocalReadIoTimeoutSecs	Timeout for IOs for dce local reads.	120	120	0	1000	True
HBR.MigrateFlushTimerSecs	Time between attempts to flush the state to the persistent file during migration.	3	3	1	600	True
HBR.NetworkUseCubic	Use the cubic TCP congestion algorithm for HBR sockets	1	1	0	1	True
HBR.NetworkerRecvHashBuckets	Number of hash buckets to use to track commands waiting to receive a response.	64	64	1	65536	True
HBR.OpportunisticBlockListSize	Number of blocks to keep around in a LRU list for opportunistic replication	4000	4000	500	10000	True
HBR.ProgressReportIntervalMs	Interval between per-disk progress updates to hostd	5000	5000	1000	600000	True
HBR.PsfIoTimeoutSecs	Timeout for IOs for persistent state file/demand log metadata.	300	300	0	1000	True
HBR.ReconnectFailureDelaySecs	Additional delay in seconds added per reconnection failure for a session	10	10	10	300	True
HBR.ReconnectMaxDelaySecs	Maximum delay in seconds between reconnection attempts for a session	90	90	30	300	True
HBR.ResourceServerHashBuckets	Number of hash buckets to use to track remote HBR servers.	8	8	1	65536	True
HBR.RetryMaxDelaySecs	Maximum server request retry delay in seconds (for non-fatal errors)	60	60	1	120	True
HBR.RetryMinDelaySecs	Minimum server request retry delay in seconds (for non-fatal errors)	1	1	1	60	True
HBR.SyncTransferRetrySleepSecs	Time in seconds to wait after a failure before retrying a sync operation.	5	5	1	600	True
HBR.TransferDiskMaxCompletion	Maximum number of blocks that are allowed in the completion phase per disk	0	0	0	512	True
HBR.TransferDiskMaxIo	Maximum number of blocks that will be read in parallel	32	32	1	128	True
HBR.TransferDiskMaxNetwork	Maximum number of blocks that will be transferred in parallel	64	64	1	256	True
HBR.TransferDiskPerSlice	Maximum number of blocks that will be read in each slice	16	16	1	128	True
HBR.TransferFileExtentSize	Chunk size for config file transfers	8192	8192	512	1048576	True
HBR.TransferMaxContExtents	Maximum number of contiguous extents that will be coalesced into a single update	16	16	1	128	True
HBR.WireChecksum	Use wire checksums	1	1	0	1	True
HBR.XferBitmapCheckIntervalSecs	Time in seconds to wait before checking the transfer bitmap for availability of dirty blocks.	1	1	1	600	True
Hpp.HppPReservationCmdRetryTime	Time (in secs) to retry on transient errors for Persistent reservation commands for MSCS CAB configs	1	1	1	300	True
ISCSI.CloseIscsiConnOnTaskMgmtFailure	Close iSCSI connection on task management failure	1	1	0	1	True
ISCSI.MaxIoSizeKB	The maximum I/O size of Software iSCSI in KB. Requires rebooting the host.	128	128	128	512	True
ISCSI.SocketRcvBufLenKB	Socket receive buffer length in KB for iSCSI connections	256	256	256	6144	True
ISCSI.SocketSndBufLenKB	Socket send buffer length in KB for iSCSI connections	600	600	600	6144	True
Irq.BestVcpuRouting	IRQ best virtual CPU routing	0	0	0	1	True
Irq.IRQActionAffinityWeight	relative weight for action-vcpu affinity	5	5	0	10	True
Irq.IRQAvoidExclusive	Avoid placing interrupts on physical CPUs with exclusive affinity set.	1	1	0	1	True
Irq.IRQBHConflictWeight	relative weight for irq/BH conflict	5	5	0	10	True
Irq.IRQRebalancePeriod	Time in milliseconds between attempts to rebalance interrupts	50	50	10	20000	True
Irq.IRQVcpuConflictWeight	relative weight for irq/vcpu conflict	3	3	1	10	True
LPage.LPageAlwaysTryForNPT	Enable always try to alloc large page for NPT	1	1	0	1	True
LPage.LPageDefragEnable	Enable large page defragmentation	1	1	0	1	True
LPage.LPageMarkLowNodes	Enable marking of nodes with low large pages free	1	1	0	1	True
LPage.MaxSharedPages	Maximum number of shared pages in a 2MB region that may be broken to back the region with a large page	510	510	0	512	True
LPage.MaxSwappedPagesInitVal	Initial value for maximum number of swapped pages in a 2MB region that may be read to back the region with a large page	10	10	0	512	True
LPage.freePagesThresholdForRemote	Maximum number of free small pages on local nodes to allow remote lpages	2048	2048	0	4294967295	True
LSOM.blkAttrCacheSizePercent	BlkAttr cache size percent growth rate with peak value (100%) caching almost all blkattrs for the diskgroup.	0	0	0	100	True
LSOM.lsomDeviceNeedsRepairCount	Number of times the device can be repaired for transient IO errors.	3	3	0	64	True
LSOM.lsomEnableFullRebuildAvoidance	Enable LSOM full rebuild avoidance for transient IO errors. (0:disabled 1:enabled)	1	1	0	1	True
LSOM.lsomEnableRebuildOnLSE	Remediate the device error by automatically re-creating diskgroup on encountering Medium Error on the device	1	1	0	2	True
LSOM.lsomPlogEnableDeadmanTimer	Configuration if an I/O is stuck for a long time. (0:No Action 1:PSOD 2:Disk offline)	2	2	0	2	True
LSOM.lsomRebuildOnEvacFailure	Remediate the device error by automatically re-creating diskgroup on encountering Unrecoverable Read Error on the device even if evacuation of the device failed	0	0	0	1	True
Mem.AllocGuestLargePage	Enable large page backing of guest memory	1	1	0	1	True
Mem.CtlMaxPercent	Vmmemctl limit as percentage of virtual machine maximum size	65	65	0	99	True
Mem.IdleTax	Idle memory tax rate	75	75	0	99	True
Mem.IdleTaxType	idle tax type. 0=flat, 1=variable	1	1	0	1	True
Mem.MemCBTBitmapMaxAlloc	Maximum memory in MB to allocate for CBT bitmaps.	1024	1024	256	2048	True
Mem.MemDefragClientsPerDir	Clients that are allowed to defrags per directory.	2	2	0	512	True
Mem.MemEagerZero	Zero out userworld and guest memory pages immediately after free	0	0	0	1	True
Mem.MemMaxResvThreshold	Max memory reservartion threshold used for indicating health state	16384	16384	0	4294967295	True
Mem.MemMinFreePct	Percentage of host memory to reserve for accelerating memory allocations when free memory is low, 0 for automatic	0	0	0	50	True
Mem.MemZipEnable	Enable the memory compression cache	1	1	0	1	True
Mem.MemZipMaxAllocPct	Sets the maximum size for the compression cache as a percentage of allocated VM memory size	50	50	5	100	True
Mem.MemZipMaxPct	Sets the maximum target size for the compression cache as a percentage of VM size	10	10	5	100	True
Mem.ReallocPolicy	Memory scheduling policy. 0: default, 1: GFMS, 2: Legacy	0	0	0	2	True
Mem.SampleActivePctMin	lower bound for sampled active memory	1	1	0	10	True
Mem.SampleDirtiedPctMin	lower bound for sampled active dirtied memory	0	0	0	10	True
Mem.ShareCOSBufSize	Specify number of MPNs to be used by COW P2M buffer	5	5	2	32	True
Mem.ShareForceSalting	PShare salting lets you limit the transparent page sharing only between a set of VMs. PShare salting is controlled by the VMX sched.mem.pshare.salt option. The PShare salting option has three states: 0 - no salting or isolation between VMs; 1 - VMs that have the sched.mem.pshare.salt option set are able to share memory with VMs with the same salt; 2 - VMs that do not have the sched.mem.pshare.salt option set cannot share memory with any other VM, page sharing is possible only inside the VM. If the sched.mem.pshare.salt is present but empty, the VM gets its own unique salt.	2	2	0	2	True
Mem.ShareRateMax	per-VM upper limit on pshare scan rate in pages/sec. (0 to disable)	1024	1024	0	32768	True
Mem.ShareScanGHz	max page scan rate in MB/sec per GHz of host CPU, 0 to disable	4	4	0	32	True
Mem.ShareScanTime	desired time in minutes to scan entire VM	60	60	10	600	True
Mem.VMOverheadGrowthLimit	Default limit (in MB) on VM overhead memory growth. Valid values are 0 to maximum memory supported, and 0xffffffff which means "unlimited".	4294967295	4294967295	0	4294967295	True
Migrate.BindToVmknic	Bind the vMotion socket to a specific vmknic. 0 for never, 1 to bind only with FT, 2 to bind with FT or for multi-vmknic support, 3 to always bind	3	3	0	3	True
Migrate.CptCacheMaxSizeMB	Maximum checkpoint cache size in MB	544	544	8	1024	True
Migrate.DebugChecksumMismatch	Debug checksum mismatch.	0	0	0	1	True
Migrate.DetectZeroPages	Whether vMotion should detect zero pages during page transmission	1	1	0	1	True
Migrate.Enabled	Enable hot migration support	1	1	0	1	True
Migrate.GetPageSysAlertThresholdMS	Threshold in milliseconds for the source host to prepare a page for transmission above which a SysAlert is triggered	10000	10000	1000	100000	True
Migrate.LowBandwidthSysAlertThreshold	Threshold in KB/s for VMotion bandwidth below which a SysAlert is triggered	0	0	0	100000	True
Migrate.LowMemWaitSysAlertThresholdMS	Threshold in milliseconds for the dest host to leave the low-memory state above which a SysAlert is triggered	10000	10000	1000	100000	True
Migrate.MigrateBitmapEncodingType	Encoding type for changed bitmap transfer	2	2	0	2	True
Migrate.MigrateCpuMinPctDefault	Desired default shared CPU reservation (in %) for VMotions	30	30	0	400	True
Migrate.MigrateCpuPctPerGb	Desired per Gbit shared CPU reservation (in %) for VMotions	10	10	0	100	True
Migrate.MigrateCpuSharesHighPriority	CPU shares for a high priority VMotion	60000	60000	1	100000	True
Migrate.MigrateCpuSharesRegular	CPU shares for a regular VMotion	30000	30000	1	100000	True
Migrate.MonActionWaitSysAlertThresholdMS	Threshold in milliseconds for the monitor to process a pre-copy action after which a SysAlert is triggered	2000	2000	1	100000	True
Migrate.NetExpectedLineRateMBps	Expected network throughput, in MBps, for bandwidth-delay calculation	133	133	1	2000	True
Migrate.NetLatencyModeThreshold	Lowest possible round-trip time, in ms, before vMotion must operate in latency-aware mode.	4	4	1	1000	True
Migrate.NetTimeout	Timeout in seconds for migration network operations	20	20	1	3600	True
Migrate.NfcNetTimeout	Time-out in seconds for NFC migration network operations	60	60	1	3600	True
Migrate.OutstandingReadKBMax	Maximum socket-backed mbuf bytes vMotion will allow to be outstanding while drained concurrently with reads, 0 for unlimited	128	128	0	2048	True
Migrate.PanicOnChecksumMismatch	1 for world panic, 2 for vmkernel panic	0	0	0	2	True
Migrate.PreCopyCountDelay	Delay preCopy next action every n action posts	10	10	0	1000	True
Migrate.PreCopyMinProgressPerc	Minimum allowed transmit to dirty page ratio per pre-copy iteration	130	130	1	1000	True
Migrate.PreCopyPagesPerSend	Maximum number of pages to send per precopy transmit	32	32	1	1024	True
Migrate.PreCopySwitchoverTimeGoal	Goal time in milliseconds to send changed pages after pre-copy completes	500	500	100	100000	True
Migrate.PreallocLPages	Attempt to prealloc destination pages via large page allocation	1	1	0	1	True
Migrate.ProhibitInstantClone	Prohibit instant clone from a VM	0	0	0	1	True
Migrate.RcvBufSize	TCP receive buffer size for the destination	562540	562540	65536	1000000	True
Migrate.SdpsDynamicDelaySec	Delay, in seconds, between polling when considering enabling SDPS in the first preCopy iteration.	30	30	0	10000	True
Migrate.SdpsEnabled	Stuns VMotion source in small increments during precopy, 0=disabled, 1=always enabled, 2=dynamic	2	2	0	2	True
Migrate.SdpsTargetRate	Percent by which transmit should be made to exceed dirty	500	500	1	10000	True
Migrate.SndBufSize	TCP send buffer size for the source	562540	562540	65536	1000000	True
Migrate.TcpTsoDeferTx	Use TCP tso defer optimization for transmit	0	0	0	1	True
Migrate.TryToUseDefaultHeap	Attempt use the default migration heap when beginning new migrations	1	1	0	1	True
Migrate.VASpaceReserveCount	Number of migrations to reserve virtual address space for at module load time	64	64	2	64	True
Migrate.VASpaceReserveSize	Megabytes of virtual address space to reserve per migration at module load time	4096	4096	64	4096	True
Migrate.VMotionLatencySensitivity	Make vMotion helper worlds latency sensitive, avoid transmit delays.	1	1	0	1	True
Migrate.VMotionResolveSwapType	Attempt to resolve swap type during VMotion initialization	1	1	0	1	True
Migrate.VMotionStreamHelpers	Number of helpers to allocate for VMotion streams, 0 to dynamically allocate atleast one per stream IP	0	0	0	112	True
Migrate.Vmknic	vmknic for vMotion vmkernel VNIC		vmk0	N/A	N/A	True
Misc.APDHandlingEnable	Enable Storage APD Handling.	1	1	0	1	True
Misc.APDTimeout	Number of seconds a device can be in APD before failing User World I/O.	140	140	20	999999	True
Misc.BHTimeout	Time-out for bottom-half handlers in milliseconds	0	0	0	5000	True
Misc.BhTimeBound	Time bound on BH checking in us (microseconds).	2000	2000	0	500000	True
Misc.BlueScreenTimeout	Time-out in seconds. Set to 0 for no time-out.	0	0	0	65535	True
Misc.ConsolePort	Name of serial port to use for visor console (COM1, COM2)	none	none	N/A	N/A	True
Misc.DebugBuddyEnable	Enable buddy debugging. Set to 0 to disable.	0	0	0	1	True
Misc.DebugLogToSerial	Send vmkernel LOG messages to the serial port	0	0	0	1	True
Misc.DebugShellPort	Name of serial port to use for debug shell (COM1, COM2)	none	none	N/A	N/A	True
Misc.DefaultHardwareVersion	Default virtual machine compatibility			N/A	N/A	True
Misc.DegradedPathEvalTime	Evaluation time (in secs) for paths to mark the path as degraded	5	5	0	500	True
Misc.DegradedPathReEvalInterval	Re-evaluation interval (in secs) for the degraded paths	60	60	60	600	True
Misc.EnableHighDMA	Enable DMA above 4GB	1	1	0	1	True
Misc.EnablePSPLatencyPolicy	Enable latency based sub-policy of Round-robin path selection plugin	1	1	0	1	True
Misc.GDBPort	Name of serial port to use for GDB debugging (COM1, COM2)	none	none	N/A	N/A	True
Misc.GuestLibAllowHostInfo	Allow guest to read host-level metrics	0	0	0	1	True
Misc.HeapMgrGuardPages	Number of guard pages to insert between heap VA regions	1	1	0	512	True
Misc.HeapPanicDestroyNonEmpty	Panic when a non-empty heap gets destroyed	0	0	0	1	True
Misc.HeartbeatInterval	Interval in msec to check CPU lockups	1000	1000	100	86400000	True
Misc.HeartbeatPanicIpiCount	Number of IPIs sent to target pcpu prior to invoking NMI PSOD	2	2	0	5	True
Misc.HeartbeatPanicTimeout	Interval in seconds after which to panic if no heartbeats received	14	900	1	86400	True
Misc.HeartbeatTimeout	Time-out for sending NMI to the locked CPU	7	90	1	86400	True
Misc.HordeEnabled	Enables horde mode	0	0	0	1	True
Misc.HppDegradedPathThresholdPer	Percentage threshold of transient errors to mark path as degraded	20	20	0	100	True
Misc.HppManageDegradedPaths	Choose paths with less errors for I/Os during transient issues on HPP claimed paths	1	1	0	1	True
Misc.HyperClockAllowSystemTimeAux	Allow auxiliary input to system time HyperClock	0	0	0	1	True
Misc.IoFilterWatchdogTimeout	Timeout for the I/O filter watchdog in seconds. 0 means the watchdog is disabled. 120 seconds is the minimum timeout value.	120	120	0	3600	True
Misc.LogDumpShutdownTimeout	The maximum amount of time during shutdown that the kernel logger will spend dumping logs from the log buffer	180	180	0	1800	True
Misc.LogPort	Name of serial port to use for logging (COM1, COM2)	none	none	N/A	N/A	True
Misc.LogTimestampUptime	Use uptime rather than UTC for vmkernel log	0	0	0	1	True
Misc.LogToFile	Send VMkernel log messages to /var/log/vmkernel	1	1	0	1	True
Misc.LogToSerial	Send VMkernel log messages to the serial port	1	1	0	1	True
Misc.LogWldPrefix	Include running world on every log statement	1	1	0	1	True
Misc.MCEMonitorInterval	Interval[0 - 0x7fffffff ms] to poll for Machine Check Errors(0=never)	1000	1000	0	2147483647	True
Misc.MaximumHardwareVersion	Maximum virtual machine compatibility			N/A	N/A	True
Misc.MinimalPanic	Do not attempt core dump after purple screen	0	0	0	1	True
Misc.NMILint1IntAction	Override how a hardware generated NMI is handled: 0=default (panic, unless changed by boot-time option), 1=enter debugger, 2=panic, 3=log and ignore (not recommended), 4=log and ignore if undiagnosed	0	0	0	3	True
Misc.NmpDegradedPathThresholdPer	Percentage threshold of transient errors to mark path as degraded	20	20	0	100	True
Misc.NmpManageDegradedPaths	Choose paths with less errors for I/Os during transient issues on NMP claimed paths	1	1	0	1	True
Misc.PSPDeactivateFlakyPath	Deactivate flaky path if IOs are failing with HOST ERROR	0	0	0	1	True
Misc.PanicLogToSerial	Send Panic log messages to the serial port	0	0	0	1	True
Misc.PowerButton	Action to take on a momentary press of the soft power button (0=ignore, 1=request graceful system shutdown and power-off)	1	1	0	1	True
Misc.PowerOffEnable	Action to take on system power-off request (0=halt only, 1=power off)	1	1	0	1	True
Misc.PreferredHostName	Preferred Host name			N/A	N/A	True
Misc.ProcVerbose	Option unused			N/A	N/A	True
Misc.RebootMethod	Preferred reboot method (any, psci, acpi, rcr_hard, kb, ps2, uefi, or rcr_power)	any	any	N/A	N/A	True
Misc.SIOControlFlag1	Storage I/O Control Internal Flag	0	0	0	2147483647	True
Misc.SIOControlFlag2	Storage I/O Control Internal Flag	0	0	0	2147483647	True
Misc.SIOControlLoglevel	Storage I/O Control Log Level	0	0	0	7	True
Misc.SIOControlOptions	Storage I/O Control Options			N/A	N/A	True
Misc.ScreenSaverDelay	Delay in minutes before screensaver kicks in	0	0	0	60	True
Misc.ShaperStatsEnabled	Enable stats in shaper module	1	1	0	1	True
Misc.ShellPort	Name of serial port to use for visor shell (COM1, COM2)	none	none	N/A	N/A	True
Misc.TestNativeFCPaeCapable	native_fc test module is pae capable	0	0	0	1	True
Misc.TimerTolerance	Default timer lateness tolerance in microseconds	2000	2000	100	1000000	True
Misc.UserDuctDynBufferSize	Max buffer size for UW duct (bytes)	16384	16384	0	32768	True
Misc.UserSocketUnixMaxBufferSize	Max buffer size for UW unix domain sockets (bytes)	65536	65536	0	131072	True
Misc.WatchdogBacktrace	Backtrace on every Nth watchdog	0	0	0	10	True
Misc.forceBPB	Force use of BPB.	0	0	0	1	True
Misc.forceMPTI	Force use of Monitor Page Table Isolation.	1	1	0	1	True
Misc.vmmDisableL1DFlush	Disable L1D flush on VM entry	0	0	0	1	True
Misc.vsanWitnessVirtualAppliance	Indicates a vSAN witness host running in a Virtual Appliance. VM services (create/register/power on) are blocked	0	0	0	1	True
Misc.DsNsMgrTimeout	Timeout for DatastoreNamespaceManager operations in milliseconds	1200000	1200000	10000	1800000	False
Misc.HostAgentUpdateLevel	The update level of Host Agent.		3	N/A	N/A	False
Misc.MetadataUpdateTimeoutMsec	Timeout for VM MetadataManager operations in milliseconds	30000	30000	0	600000	False
NFS.ApdStartCount	Number of sequential heartbeat failures after which APD start event is triggered	3	3	1	5	True
NFS.DiskFileLockUpdateFreq	Time (in seconds) between updates to a disk lock file	10	10	8	3600	True
NFS.HeartbeatDelta	Time in seconds since the last successful update before a heartbeat is sent	5	5	3	30	True
NFS.HeartbeatFrequency	Time in seconds between heartbeats	12	12	5	86400	True
NFS.HeartbeatMaxFailures	Number of sequential failures before a volume is marked down	10	10	6	10	True
NFS.HeartbeatTimeout	Time in seconds before an outstanding heartbeat is stopped	5	5	3	30	True
NFS.LockBreakTimeout	Time (in seconds) to wait to check for expired races when breaking lock	10	10	0	3600	True
NFS.LockRenewMaxFailureNumber	Number of update failures before a disk file lock is declared stale	3	3	1	100	True
NFS.LockSWMRTimeout	Time (in seconds) to wait to check for expired races when acquiring SWMR lock	10	10	0	3600	True
NFS.LockSharedTimeout	Time (in seconds) to wait to check for expired races when sharing (read) lock	0	0	0	3600	True
NFS.LockUpdateTimeout	Time (in seconds) before we abort an outstanding lock update	5	5	1	8	True
NFS.LogNfsStat3	Log nfsstat3 code	0	0	0	1	True
NFS.MaxQueueDepth	Maximum per-Volume queue depth	4294967295	4294967295	1	4294967295	True
NFS.MaxVolumes	Maximum number of mounted NFS v3 volumes	32	32	8	256	True
NFS.NFSMaxOutstandingIOs	Maximum number of NFSv3 outstanding IOs on the host	65536	65536	32	131072	True
NFS.ReceiveBufferSize	Default size of socket receive buffer (KB)	1024	1024	64	5120	True
NFS.SendBufferSize	Default size of socket send buffer (KB)	1024	1024	32	5120	True
NFS.SyncRetries	Number of retries before synchronous IO fails (10 seconds per retry)	25	25	3	360	True
NFS.VolumeRemountFrequency	Time in seconds before attempting to remount a volume	30	30	30	3600	True
NFS41.EOSDelay	Request EOS safety delay in seconds	30	30	0	90	True
NFS41.IOTaskRetry	Synchronous I/O task number of retries	25	25	1	100	True
NFS41.MaxRead	Maximum read transfer size in bytes (use the smaller of this value and the server advertised value)	4294967295	4294967295	256	4294967295	True
NFS41.MaxVolumes	Maximum number of mounted NFS v4.1 volumes	32	32	8	256	True
NFS41.MaxWrite	Maximum write transfer size in bytes (use the smaller of this value and the server advertised value)	4294967295	4294967295	256	4294967295	True
NFS41.MountTimeout	Mount timeout in seconds	30	30	1	60	True
NFS41.RecvBufSize	Socket receive buffer size in kilobytes (using default if set to zero)	1024	1024	0	2048	True
NFS41.SendBufSize	Socket send buffer size in kilobytes (using default if set to zero)	1024	1024	0	2048	True
Net.AdvertisementDuration	duration of RARP advertisements	60	60	0	255	True
Net.AllowPT	Whether to enable UPT/NPA	1	1	0	1	True
Net.BlockGuestBPDU	Block guest sourced BPDU frames	0	0	0	1	True
Net.CoalesceDefaultOn	Dynamic coalescing on by default	1	1	0	1	True
Net.CoalesceFavorNoVmmVmkTx	Favor disabling all vmm->vmk tx transitions; boost its score by factor of this/64.	1	1	0	64	True
Net.CoalesceFineTimeoutCPU	Set which CPU the fine timer will run on	2	2	0	512	True
Net.CoalesceFineTxTimeout	set the fine coalesce timeout in microseconds	1000	1000	1	4294967295	True
Net.CoalesceFlexMrq	Whether to dynamically switch on/off multiRxQCalib.	1	1	0	1	True
Net.CoalesceLowRxRate	No Rx coalescing calibration when the number of pkts Rx per timeout is lower than this number.	4	4	0	256	True
Net.CoalesceLowTxRate	No tx coalescing calibration when the number of pkts tx per timeout is lower than this number.	4	4	0	256	True
Net.CoalesceMatchedQs	Whether to use matched TxRxQ-pairs mode when applicable.	1	1	0	1	True
Net.CoalesceMrqLt	Whether to set a RxQ's coalesce to zero based on per-RxQ Low Traffic.	1	1	0	1	True
Net.CoalesceMrqMetricAllowTxOnly	Whether to allow's individual RxQ's perf metric to be tx pkt cnt only; if not, it will be tx + rx, or rx only.	1	1	0	1	True
Net.CoalesceMrqMetricRxOnly	Whether to force individual RxQ's perf metric to be rx pkt cnt only.	0	0	0	1	True
Net.CoalesceMrqOverallStop	Whether to use overall performance to stop RxQ Calib.	0	0	0	1	True
Net.CoalesceMrqRatioMetric	Whether Tx perf score is attributed to RxQ according to rxPktCnt ratio.	1	1	0	1	True
Net.CoalesceMrqTriggerReCalib	Whether to let individual RxQ's perf change trigger re-calib.	1	1	0	1	True
Net.CoalesceMultiRxQCalib	When not in matched TxRxQ-pairs mode, whether to uses separate RxQ Calib.	1	1	0	1	True
Net.CoalesceNoVmmVmkTx	Whether to try disable all vmm->vmk tx transitions.	1	1	0	1	True
Net.CoalesceParams	Set parameters for the default virtual NIC coalescing scheme.			N/A	N/A	True
Net.CoalesceRBCRate	Target event rate for RateBasedCoalescing	4000	4000	100	100000	True
Net.CoalesceRxLtStopCalib	Whether Rx Low Traffic stops Rx calibration.	0	0	0	1	True
Net.CoalesceRxQDepthCap	Cap of Rx coalescing size.	40	40	0	80	True
Net.CoalesceScheme	Set the default virtual NIC coalescing scheme.	rbc	rbc	N/A	N/A	True
Net.CoalesceTimeoutType	set the coalesce timeout type: fine(1 ms by default) or coarse (4 ms by default)	2	2	1	2	True
Net.CoalesceTxAlwaysPoll	Whether always poll Tx at coalesce timeout handler.	1	1	0	1	True
Net.CoalesceTxQDepthCap	Cap of Tx coalescing size.	40	40	0	80	True
Net.CoalesceTxTimeout	Set the coalesce time-out in microseconds	4000	4000	1	4294967295	True
Net.DCBEnable	Enable DCB for FCoE	1	1	0	1	True
Net.DVFilterBindIpAddress	DVFilter internal communication endpoint			N/A	N/A	True
Net.DVFilterPriorityRdLockEnable	Use priority locking in dvfilter to read lock portsets	1	1	0	1	True
Net.DVSLargeHeapMBPerGB	Maximum MB of dvsLargeHeap memory to be allocated per GB of physical memory	2	2	0	20	True
Net.DVSLargeHeapMaxSize	Max size for the dvsLargeHeap	300	300	64	2048	True
Net.DontOffloadInnerIPv6	Don't offload inner IPv6 CSO/TSO packets to physical NICs	0	0	0	1	True
Net.E1000IntrCoalesce	Whether to enable interrupt coalescing for e1000 vNIC.	1	1	0	1	True
Net.E1000TxCopySize	e1000 tx less than or equal to this will be fully copied with no need for completion.	2048	2048	0	4294967295	True
Net.E1000TxZeroCopy	Use tx zero copy for non-tso packets for e1000.	1	1	0	1	True
Net.EnableDMASgCons	When non-zero, enable the DMA SG constraints support in uplink layer	1	1	0	1	True
Net.EnableOuterCsum	Enable uplink layer outer checksumming	1	1	0	1	True
Net.EnsMbufpoolMaxMBPerGB	Maximum MB of the ENS slab memory to be allocated per GB of physical memory	200	200	10	500	True
Net.EnsMbufpoolMinMBPerGB	Minimum MB of the ENS slab memory to be allocated per GB of physical memory	10	10	0	500	True
Net.EtherswitchAllowFastPath	Allow Etherswitch fast path	0	0	0	1	True
Net.EtherswitchHashSize	Number of ports on the etherswitch x 2^N is the size of the hash table for looking up MACs	1	1	0	4	True
Net.EtherswitchHeapMax	The maximum size (in Megabytes) to which the etherswitch heap can grow. (REQUIRES REBOOT!)	512	512	86	2047	True
Net.EtherswitchNumPerPCPUDispatchData	The dispatch data number in the etherswitch per-pCPU dispatch data cache. (REQUIRES REBOOT!)	3	3	3	63	True
Net.FollowHardwareMac	If set to 1, the management interface MAC address will update whenever the hardware MAC address changes.	0	0	0	1	True
Net.GuestIPHack	Enable guest arp inspection IOChain to get IP	0	0	0	1	True
Net.GuestTxCopyBreak	Transmits smaller than this will be copied rather than mapped	64	64	60	4294967295	True
Net.IGMPQueries	Number of IGMP Queries to send during after VMotion/Teaming failover	2	2	0	2	True
Net.IGMPQueryInterval	Interval(in seconds) for IGMP/MLD general query in multicast snooping	125	125	32	3600	True
Net.IGMPRouterIP	Router IP Address for IGMP (generally not necessary to set this)	0.0.0.0	0.0.0.0	N/A	N/A	True
Net.IGMPV3MaxSrcIPNum	Max per-group srouce IP number for IGMP V3	10	10	1	32	True
Net.IGMPVersion	IGMP Version (2 or 3)	3	3	2	3	True
Net.LRODefBackoffPeriod	After adaptive LRO decided not to do LRO, how many intervals to wait before trying again.	8	8	0	65535	True
Net.LRODefMaxLength	LRO default max length	65535	65535	1	65535	True
Net.LRODefThreshold	After this # packets, evaluate whether to continue SW LRO	4000	4000	0	65535	True
Net.LRODefUseRatioDenom	If SW LRO reduce pkt count to be smaller than ratio, continue to do LRO. Denominator of ratio.	3	3	0	255	True
Net.LRODefUseRatioNumer	If SW LRO reduce pkt count to be smaller than ratio, continue to do LRO. Numerator of ratio.	1	1	0	255	True
Net.LinkFlappingThreshold	Max number of link down events per minute before considering a link unstable (0 to deactivate)	60	60	0	65535	True
Net.LinkStatePollTimeout	Link State poll timer period in milliseconds.	500	500	100	90000	True
Net.MLDRouterIP	Router IPv6 Address for MLD (generally not necessary to set this)	FE80::FFFF:FFFF:FFFF:FFFF	FE80::FFFF:FFFF:FFFF:FFFF	N/A	N/A	True
Net.MLDV2MaxSrcIPNum	Max per-group srouce IP number for MLD V2	10	10	1	32	True
Net.MLDVersion	MLD Version (1 or 2)	2	2	1	2	True
Net.MaxBeaconVlans	maximum number of VLANs to probe with beacons.	100	100	0	4096	True
Net.MaxBeaconsAtOnce	Maximum number of beacons to send in one beacon cycle	100	100	0	4096	True
Net.MaxGlobalRxQueueCount	Global max length of rx queues for all virtual ports on a ESX host that support queueing	100000	100000	0	4294967295	True
Net.MaxNetifTxQueueLen	Maximum length of the Tx queue for the physical NICs	2000	2000	1	10000	True
Net.MaxPageInQueueLen	Maximum number of paging requests to queue for guest DMA	75	75	0	500	True
Net.MaxPktRxListQueue	Maximum packet we can queue in rxList	3500	3500	0	200000	True
Net.MaxPortRxQueueLen	Maximum length of the rx queue for virtual ports whose clients support queuing	80	80	1	500	True
Net.MinEtherLen	Minimum size ethernet frame to transmit	60	60	60	1518	True
Net.NcpLlcSap	beacon/color NCP messages created with this SAP (DSAP/SSAP)	0	0	0	255	True
Net.NetBHRxStormThreshold	Declare Rx Storm after this number of consecutive rx pkt drops during queuing in NetBH rxList.	320	320	0	200000	True
Net.NetDebugRARPTimerInter	RARP timer will be triggered at this interval.	30000	30000	0	16777215	True
Net.NetDeferTxCompletion	Whether to defer tx completion to tx world. 1 for Try Completion. 2 For Always (Only in MQ Tx World case).	1	1	0	2	True
Net.NetDiscUpdateIntrvl	Set interval (in milliseconds) of networking discovery to update the VLAN information	300	300	1	4294967295	True
Net.NetEnableSwCsumForLro	Whether enable software checksum for LRO	1	1	0	1	True
Net.NetEsxfwPassOutboundGRE	Whether outbound GRE traffic is passed by ESXi firewall	1	1	0	1	True
Net.NetInStressTest	If set to 1, suppress certain logs to avoid log spew.	0	0	0	1	True
Net.NetLatencyAwareness	Whether to check virtual machine's latency settings or not for vmxnet2/3	1	1	0	1	True
Net.NetMaxRarpsPerInterval	Max number of RARPs dispatched per timer callback.	128	128	1	4294967295	True
Net.NetNetqNumaIOCpuPinThreshold	CPU threshold for pinning device queues in NUMA I/O	0	0	0	60	True
Net.NetNetqRxRebalRSSLoadThresholdPerc	Threshold percentage to rebalance RSS(Receive Side Scaling) queue	10	10	0	100	True
Net.NetNetqTxPackKpps	Max TX queue load (in thousand packet per second) to allow packing on the corresponding RX queue	300	300	1	10000	True
Net.NetNetqTxUnpackKpps	Threshold (in thousand packet per second) for TX queue load to trigger unpacking of the corresponding RX queue	600	600	1	10000	True
Net.NetNiocAllowOverCommit	Whether allow NIOC overcommit when a vNIC is in connected state for DVS	1	1	0	1	True
Net.NetPTMgrWakeupInterval	How often the PTMgr will wakeup and trigger the UPT mode switch in second.	6	6	5	10	True
Net.NetPktAllocTries	Number of attempts for allocating packet within the page	5	5	1	10	True
Net.NetPktSlabFreePercentThreshold	Percent of free network memory pool, below which an event is reported.	2	2	2	50	True
Net.NetPortFlushIterLimit	when input is serialized, this bounds the number of times a thread flushes the deferred list.	2	2	0	127	True
Net.NetPortFlushPktLimit	when input is serialized, this bounds the number of pkts a thread flushes from the deferred list.	64	64	0	255	True
Net.NetPortTrackTxRace	if enabled(1), collect statistics on potential tx race between concurrent threads.	0	0	0	1	True
Net.NetRCFAllowBPF	Allow to run BPF code in RCF	1	1	0	1	True
Net.NetRmDistMacFilter	Activate/Deactivate the MAC filter on distributed NetRM	1	1	0	1	True
Net.NetRmDistSamplingRate	Sampling rate on distributed NetRM	0	0	0	10000	True
Net.NetRxCopyInTx	Whether to enable rx copy in tx worldlet/world.	0	0	0	1	True
Net.NetSchedCoalesceTxUsecs	Maximum number of microseconds the device can delay tx completions	33	33	1	125	True
Net.NetSchedDefaultResPoolSharesPct	Percent share given to unclassified traffic	5	5	1	99	True
Net.NetSchedDefaultSchedName	Default networking packet scheduler	fifo	fifo	N/A	N/A	True
Net.NetSchedECNEnabled	Enable net scheduler to send congestion notification to switch ports.	1	1	0	1	True
Net.NetSchedECNThreshold	Percentage queue utilization at which net scheduler will start sending congestion notifications to switch ports.	70	70	0	100	True
Net.NetSchedHClkLeafQueueDepthPkt	Minimum number of packets each HClk leaf node can hold	640	640	1	10000	True
Net.NetSchedHClkMQ	Enable multiple hardware queue for hclk netsched. (0 is off. 1 and 2 means MQ enabled. With 1, user specifies the number of queues, while 2 is dynamic based on link speed.)	2	2	0	2	True
Net.NetSchedHClkMaxHwQueue	Maximum number hardware queue that HClock can use. Only used when NetSchedHClkMQ is 1.	2	2	1	128	True
Net.NetSchedHClkVnicMQ	Enable multiple VNIC queue for hardware send queue selection	0	0	0	1	True
Net.NetSchedHeapMaxSizeMB	Size of the netsched subsystem heap in MB	64	64	1	96	True
Net.NetSchedInFlightMaxBytesDefault	Number of bytes fed to the nic for nics with a normal (1Gbps) linkspeed	20000	20000	1500	1500000	True
Net.NetSchedInFlightMaxBytesInsane	Number of bytes fed to the nic for nics that don't support tx completion coalescing	1500000	1500000	1500	1500000	True
Net.NetSchedMaxPktSend	Maximum number of packets that we can send to the driver at a time	256	256	100	4096	True
Net.NetSchedQoSSchedName	Default networking packet scheduler for QoS	hclk	hclk	N/A	N/A	True
Net.NetSchedSpareBasedShares	Enable shares scheduling only on spare bandwidth. Don't bill while doing reservation scheduling	1	1	0	1	True
Net.NetSendRARPOnPortEnablement	Ensure one RARP is sent immediately when a port is enabled	1	1	0	1	True
Net.NetShaperQueuePerL3L4Flow	Enable queuing per L3/L4 flow hashing	1	1	0	1	True
Net.NetShaperQueueSizeMax	Maximum shaper queue size	500	500	1	5000	True
Net.NetShaperQueueSizeMin	Minimum shaper queue size	10	10	1	500	True
Net.NetSplitRxMode	Whether to enable automatic splitRxMode	1	1	0	1	True
Net.NetTraceEnable	Enable virtual network tracing	0	0	0	1	True
Net.NetTuneHostMode	Tuning mode for networking	default	default	N/A	N/A	True
Net.NetTuneInterval	Tuning interval in seconds	60	60	1	3600	True
Net.NetTuneThreshold	Threshold for activating a tuned mode	1n 2n 50	1n 2n 50	N/A	N/A	True
Net.NetTxDontClusterSize	Transmits smaller than this will not be subject to clustering.coalescing	0	0	0	8192	True
Net.NetTxStaticRelation	Whether the world should have a static relation to the VM VCPU	1	1	0	1	True
Net.NetVMTxType	World for asynchronous Tx for net devices. 1 for one tx context per vNIC. 2 for one tx context per VM	2	2	1	3	True
Net.NetpollSwLRO	Whether to perform SW LRO on pkts in netPoll	1	1	0	1	True
Net.NoLocalCSum	Do not checksum local tx.rx frames	0	0	0	1	True
Net.NotifySwitch	Broadcasts an arp request on net handle enable	1	1	0	1	True
Net.PTSwitchingTimeout	Timeout (in ms) when asking the VMX/guest to switch in/out of passthru	20000	20000	0	60000	True
Net.PVRDMAVmknic	Vmknic for PVRDMA			N/A	N/A	True
Net.PktagingDropPolicy	Dropping policy for vmxnet3 rx burst queue. 1 for PKTAGING_TAIL_DROP. 2 for PKTAGING_RED	0	0	0	1	True
Net.PortDisableTimeout	Maximum time to wait for ports to complete I/O before disabling	5000	5000	0	2147483647	True
Net.ProvisioningVmknics	vmknics used by NFC for provisioning operations.			N/A	N/A	True
Net.ReversePathFwdCheck	Block the multicast/broadcast packets that come back from physical switches in a teamed environment	1	1	0	1	True
Net.ReversePathFwdCheckPromisc	Block duplicate packet in a teamed environment when the virtual switch is set to Promiscuous mode.	0	0	0	1	True
Net.SendIGMPReportToUplink	Enable sending IGMP report to uplink	0	0	0	1	True
Net.TcpipCopySmallTx	Copy and tx complete small packets for tcp tx	1	1	0	1	True
Net.TcpipDefLROEnabled	LRO enabled for TCP/IP	1	1	0	1	True
Net.TcpipDefLROMaxLength	LRO default max length for TCP/IP	32768	32768	1	65535	True
Net.TcpipDgramRateLimiting	Enable Tx rate limiting for UDP sockets	1	1	0	1	True
Net.TcpipEnableABC	Enable Appropriate Byte Counting for TCP (RFC 3465)	1	1	0	1	True
Net.TcpipEnableFlowtable	Enable route caching through the use of flowtable	1	1	0	1	True
Net.TcpipEnableSendScaling	Enable Send-Side Scaling (requires RSS)	1	1	0	1	True
Net.TcpipHWLRONoDelayAck	Delayed ack timer not armed for Hardware LRO (socket option needs to be set in addition).	1	1	0	1	True
Net.TcpipHeapMax	Max megabytes the tcpip module heap can grow to. (REQUIRES REBOOT!)	1024	1024	32	3070	True
Net.TcpipHeapSize	Size of the TCP/IP module heap in megabytes (requires reboot)	0	0	0	32	True
Net.TcpipIGMPDefaultVersion	Default version of IGMP, in the absence of a querier	3	3	1	3	True
Net.TcpipIGMPRejoinInterval	Delay in seconds between automatic IGMP rejoins when no querier is present	60	60	10	3600	True
Net.TcpipLODispatchQueueMaxLen	Max # of pkts queued into the per-protocol queue used for dispatching loopback traffic (REQUIRES REBOOT!)	128	128	50	512	True
Net.TcpipLRONoDelayAck	Delayed ack timer not armed for LRO	1	1	0	1	True
Net.TcpipLogPackets	Turns on packet logging for a vmknic on debug builds, in a circular & in-memory buffer (Takes effect during vmknic creation time)	0	0	0	1	True
Net.TcpipLogPacketsCount	Number of packets to log in the in-memory logger. 24570 packets take up about 1.2 MB, and Tx & Rx use separate buffers. (Takes effect during vmknic creation time)	24570	24570	1024	49140	True
Net.TcpipMaxNetstackInstances	The maximum number of TCP/IP stack instances that can exist concurrently. If you increase this number, you must also increase the TcpipHeapSize by about 2.5 MB per instance. Requires rebooting the host.	48	48	48	513	True
Net.TcpipNoBcopyRx	Avoid bcopy in tcp rx	1	1	0	1	True
Net.TcpipPendPktSocketFreeTimeout	Time Delay in seconds, for freeing UDP sockets that have pending packets for Tx completion	300	300	1	300	True
Net.TcpipRxDispatchQueueMaxLen	Max # of pkts queued into a tcpip vmknic by an execution context (applied when vmknic is created)	2000	2000	1	20000	True
Net.TcpipRxDispatchQueues	Max # of dispatch queues used for RX. For low memory systems, this should be minimum value(REQUIRES REBOOT!)	2	2	1	8	True
Net.TcpipRxDispatchQuota	Max # of pkts dispatched into the tcpip stack by an execution context	200	200	1	1000	True
Net.TcpipTxDispatchQuota	Max # of pkts dispatched from the tcpip stack by an execution context	100	100	1	1000	True
Net.TcpipTxqBackoffTimeoutMs	Duration (in milli seconds) for which backoff is effective when the tx queue has reached the NET_TCPIP_TXQ_MAX_USAGE_THRESHOLD	70	70	20	1000	True
Net.TcpipTxqMaxUsageThreshold	Tx queue usage threshold in percent at which to start throttling	80	80	50	100	True
Net.TeamPolicyUpDelay	Delay (ms) before considering an `uplink up' event relevant	100	100	0	1800000	True
Net.TeamingNUMAAware	Enable the NUMA awareness in Teaming	1	1	0	1	True
Net.TrafficFilterIpAddress	Alternate DVFilter internal communication endpoint			N/A	N/A	True
Net.TsoDumpPkt	detailed dump of every pkts	0	0	0	2147483647	True
Net.UplinkAbortDisconnectTimeout	Timeout (ms) waiting for pending calls to finish when disconnecting.	5000	5000	1	6000000	True
Net.UplinkKillAsyncTimeout	Timeout (ms) waiting for async when world is killed.	10000	10000	1	6000000	True
Net.UplinkTxQueuesDispEnabled	Enables dispatching of port traffic on multiple tx queues	1	1	0	1	True
Net.UseHwCsumForIPv6Csum	When non-zero, use pNIC HW_CSUM, if available, as IPv6 csum offload	1	1	0	1	True
Net.UseHwIPv6Csum	When non-zero, use pNIC HW IPv6 csum offload if available	1	1	0	1	True
Net.UseHwTSO	When non-zero, use pNIC HW TSO offload if available	1	1	0	1	True
Net.UseHwTSO6	When non-zero, use pNIC HW IPv6 TSO offload if available	1	1	0	1	True
Net.UseLegacyProc	Enable or disable populating legacy entries in /proc/vmware/net	0	0	0	1	True
Net.UseProc	Populate /proc/vmware/net	0	0	0	1	True
Net.VLANMTUCheckMode	Set the unicast/broadcast checking mode in VLAN MTU check	1	1	0	1	True
Net.VmklnxLROEnabled	LRO enabled in vmklinux	0	0	0	1	True
Net.VmklnxLROMaxAggr	LRO max aggr in vmklinux	6	6	0	24	True
Net.VmknicDoLroSplit	whether for vmknic LRO avoids aggregating all pkts into a single (> 2 ms) large pkt.	0	0	0	1	True
Net.VmknicLroSplitBnd	when VmknicDoLroSplit is non-zero, while pktList is larger than this number, lroSplit is not done.	12	12	2	255	True
Net.Vmxnet2HwLRO	Whether to perform HW LRO on pkts going to a LPD capable vmxnet2	1	1	0	1	True
Net.Vmxnet2PinRxBuf	Pin RX buffers for vmxnet2 clients (windows guest only)	0	0	0	1	True
Net.Vmxnet2SwLRO	Whether to perform SW LRO on pkts going to a LPD capable vmxnet2	1	1	0	1	True
Net.Vmxnet3HwLRO	Whether to enable HW LRO on pkts going to a LPD capable vmxnet3	1	1	0	1	True
Net.Vmxnet3NonTsoPacketGtMtuAllowed	Allow non-TSO/LRO packets greater than vNic MTU	0	0	0	1	True
Net.Vmxnet3PageInBound	max # pageIn requests to handle per helper call for vmxnet3.	32	32	1	1024	True
Net.Vmxnet3RSSHashCache	Enable RSS hash cache.	1	1	0	1	True
Net.Vmxnet3RxPollBound	max # pkts to receive per timeout for vmxnet3.	256	256	0	4096	True
Net.Vmxnet3SwLRO	Whether to perform SW LRO on pkts going to a LPD capable vmxnet3	1	1	0	1	True
Net.Vmxnet3WinIntrHints	whether intr hints are used for Windows vmxnet3.	1	1	0	1	True
Net.Vmxnet3usePNICHash	Reuse pnic computed RSS hash.	0	0	0	1	True
Net.VmxnetBiDirNeedsTsoTx	Need to see Tso Tx to qualify for tsoSplit bidirectional traffic condition.	1	1	0	1	True
Net.VmxnetBiDirNoTsoSplit	For bidirectional traffic, don't do tsoSplit.	1	1	0	1	True
Net.VmxnetCopyTxRunLimit	non-Win vmxnet2/3 tx will have at most so many fully copied tx's in a row (65536 and larger means never).	16	16	0	4294967295	True
Net.VmxnetDoLroSplit	whether for vmxnet LRO avoids aggregating all pkts into a single (> 2 mss) large pkt.	1	1	0	1	True
Net.VmxnetDoTsoSplit	whether to split TSO pkts before LPD; 1: halved; 3: VmxnetTsoSplitSize; 2: hybrid.	1	1	0	3	True
Net.VmxnetLROBackoffPeriod	After adaptive LRO decided not to do LRO, how many intervals to wait before trying again.	8	8	0	65535	True
Net.VmxnetLROMaxLength	LRO default max length for TCP/IP	32000	32000	1	65535	True
Net.VmxnetLROThreshold	After this # packets, evaluate whether to continue SW LRO	4000	4000	0	65535	True
Net.VmxnetLROUseRatioDenom	If SW LRO reduce pkt count to be smaller than ratio, continue to do LRO. Denominator of ratio.	3	3	0	255	True
Net.VmxnetLROUseRatioNumer	If SW LRO reduce pkt count to be smaller than ratio, continue to do LRO. Numerator of ratio.	2	2	0	255	True
Net.VmxnetLroSplitBnd	when VmxnetDoLroSplit is non-zero, while pktList is larger than this number, lroSplit is not done.	64	64	2	255	True
Net.VmxnetPromDisableLro	Whether to disable SW LRO when vNIC goes into promiscuous mode.	1	1	0	1	True
Net.VmxnetSwLROSL	Whether to use ShortLived for vmxnet SW LRO	1	1	0	1	True
Net.VmxnetTsoSplitBnd	when VmxnetDoTsoSplit is 1 or 2, use targetSize as the tsoSplit threshold if the overall pkt list already has this number of pkts.	12	12	2	255	True
Net.VmxnetTsoSplitSize	split (byte) size; only used if DoTsoSplit >= 2.	17500	17500	1500	65535	True
Net.VmxnetTxCopySize	vmxnet tx <= than this will be fully copied with no need for completion.	256	256	0	4294967295	True
Net.VmxnetWinCopyTxRunLimit	Win vmxnet2/3 tx will have at most so many fully copied tx's in a row (65536 and larger means never).	65535	65535	0	4294967295	True
Net.VmxnetWinUDPTxFullCopy	whether Windows vmxnet UDP tx is fullCopy.	1	1	0	2	True
Net.vNicNumDeferredReset	max # normalPkts per poll.	12	12	0	4096	True
Net.vNicTxPollBound	max # normalPkts per poll.	192	192	0	4096	True
Net.vmxnetThroughputWeight	How far to favor throughput in vmxnet behavior.	0	0	0	255	True
Net.IOControlPnicOptOut	List of physical NICs to opt out of network I/O control			N/A	N/A	False
Nmp.NmpPReservationCmdRetryTime	Time (in secs) to retry on transient errors for Persistent reservation commands for MSCS CAB configs	1	1	1	300	True
Nmp.NmpSatpAluaCmdRetryTime	Time (in secs) to retry on transient errors	20	20	0	50	True
Numa.CoreCapRatioPct	The capacity of a core in percent. When exceeded, locality migration is rejected. Set to 0 to disable this check	90	90	0	100	True
Numa.CostopSkewAdjust	way to handle costop skew, 0:do nothing, 1:interleave vcpus among clients, 2:allow vcpus on all nodes	1	1	0	2	True
Numa.FollowCoresPerSocket	1: if the vNUMA topology should strickly follow core-per-socket config, 0: to remove the restriction	0	0	0	1	True
Numa.LTermFairnessInterval	duration of long term fairness interval in terms of NUMA rebalance period, 0 indicates that long term fairness is disabled	5	5	0	1000	True
Numa.LTermMigImbalThreshold	imbalance in long term owed, in percentage, required to trigger migration for long term fairness	10	10	0	100	True
Numa.LargeInterleave	Always use large page interleaving; 0 to disable.	1	1	0	1	True
Numa.LatencyProbePeriod	Time (in ms) in between dynamic latency probing	500	500	10	100000	True
Numa.LocalityWeightActionAffinity	Benefit of improving action affinity by 1.	130	130	0	200	True
Numa.LocalityWeightMem	Benefit of improving memory locality by 1 pct.	1	1	0	100	True
Numa.MigImbalanceThreshold	Minimum percent load imbalance between nodes to trigger migration	10	10	1	200	True
Numa.MigPreventLTermThresh	long term owed for a VM, in percentage, above which NUMA migration and swaps are disabled for that VM	0	0	0	100	True
Numa.MigThrashThreshold	Maximum post-migration load imbalance as a percentage of pre-migration imbalance to prevent thrashing	50	50	0	100	True
Numa.MigThreshold	Minimum percent load balance improvement to allow single migration.swap	2	2	0	100	True
Numa.MonMigEnable	Allow NUMASched monitor migrations. Set to 1 to enable; set to 0 to disable.	1	1	0	1	True
Numa.PageMigEnable	Permit NUMASched to manipulate page migration. Set to 1 to enable; set to 0 to disable.	1	1	0	1	True
Numa.PageMigLinearRun	page migration candidates for linear scan, 0 to disable	95	95	0	10000	True
Numa.PageMigRandomRun	page migration candidates for random scan, 0 to disable	5	5	0	10000	True
Numa.PageMigRateMax	max page migration rate	8000	8000	0	250000	True
Numa.PreferHT	Prefer using HyperThreads on the same NUMA node over full cores on multiple nodes; 0 to disable.	0	0	0	1	True
Numa.RebalanceCoresNode	Minimum number of cores per node required to enable NUMA rebalancer	2	2	1	8	True
Numa.RebalanceCoresTotal	Minimum number of total host cores required to enable NUMA rebalancer	4	4	1	32	True
Numa.RebalanceEnable	Enable or disable NUMA scheduler rebalancer	1	1	0	1	True
Numa.RebalancePeriod	Frequency of NUMA node rebalancing in milliseconds	2000	2000	100	60000	True
Numa.SwapConsiderPeriod	time between reconsidering a client for swap, in units of NUMA rebalance period	15	15	0	10000	True
Numa.SwapInterval	frequency of NUMA node swap rebalancing, in units of NUMA rebalance period	3	3	1	10000	True
Numa.SwapLoadEnable	Enable or disable virtual machine swaps across nodes to balance CPU load	1	1	0	1	True
Numa.SwapLocalityEnable	Enable or disable virtual machine swaps across nodes to improve memory locality	1	1	0	1	True
Numa.SwapMigrateOnly	frequency of NUMA VM migration only considerations, in units of NUMA rebalance period, 0 to disable pure migrations	2	2	0	100	True
Power.CStateMaxLatency	In Custom policy, avoid a C-state whose latency is larger than this value (us)	500	500	0	1000000	True
Power.CStatePredictionCoef	In Custom policy, predict non-timer wakeup with error probability p, where CStatePredictionCoef = -ln(1 - p) * (1 << 20)	110479	110479	0	2000000	True
Power.CStateResidencyCoef	In Custom policy, avoid a C-state whose latency * CStateResidencyCoef > predicted residence time	5	5	0	1000000	True
Power.ChargeMemoryPct	Percentage of idle power consumed by memory	20	20	0	100	True
Power.MaxCpuLoad	In Custom policy, CPU utilization threshold below which CPU frequency can be dynamically adjusted	60	60	0	100	True
Power.MaxFreqPct	In Custom policy, do not use P-states faster than the given percentage of full CPU speed, rounded up to the next available P-state	100	100	0	100	True
Power.MinFreqPct	In Custom policy, do not use P-states slower than the given percentage of full CPU speed	0	0	0	100	True
Power.PerfBias	In Custom policy, Performance Energy Bias Hint, where 0-15 directly specifies preference on a scale where 0=MaxPerf and 15=MinPower, while 16-18 chooses an automatically determined value from a preset policy: 16=Low Power, 17=Balanced, 18=High Performance	17	17	0	18	True
Power.PerfBiasEnable	Use Performance Energy Bias Hint	1	1	0	1	True
Power.TimerHz	In Custom policy, dynamic power management timer sampling rate	100	100	1	1000	True
Power.UseCStates	In Custom policy, use ACPI C-states when processor is idle	1	1	0	1	True
Power.UsePStates	In Custom policy, use ACPI P-states to save power when processor is busy	1	1	0	1	True
RdmFilter.HbaIsShared	Allow local disks to be RDM candidates for Virtual Machines	False	True	N/A	N/A	False
ScratchConfig.ConfiguredScratchLocation	The directory configured to be used for scratch space. Changes will take effect on next reboot.		/vmfs/volumes/650d95f1-e942b415-8eaa-000c2936d493	N/A	N/A	False
ScratchConfig.CurrentScratchLocation	The directory currently being used for scratch space.		/vmfs/volumes/650d95f1-e942b415-8eaa-000c2936d493	N/A	N/A	False
Scsi.ChangeQErrSetting	Change the QErr value of devices to 0x0.	1	1	0	1	True
Scsi.CompareLUNNumber	Consider LUN number when determining LUN identity.	1	1	0	1	True
Scsi.EnableCmdSanityCheck	Enable Scsi command basic sanity checks. This option can crash the system if Scsi Command signature mismatches	0	0	0	1	True
Scsi.ExtendAPDCondition	Trigger APD condition when paths are in unavailable states	0	0	0	1	True
Scsi.FailVMIOonAPD	Fast fail virtual machine I/Os on APD Timeout.	0	0	0	1	True
Scsi.LogCmdErrors	Log SCSI Device command errors.	1	1	0	1	True
Scsi.LogCmdRCErrorsFreq	Number of consecutive RC errors to be seen before logging SCSI Device command.	0	0	0	4294967295	True
Scsi.LogMPCmdErrors	Log SCSI Multi-path plugin command errors.	1	1	0	1	True
Scsi.LogScsiAborts	Log SCSI abort errors and success.	0	0	0	1	True
Scsi.LunCleanupInterval	Timeout for purging stale LUNs. Any LUN which was seen more than the configured number of days ago, will be deleted by the daily cleanup operation	7	7	1	100	True
Scsi.MaxReserveBacktrace	Log a backtrace if caller exceeds SCSI_MAX_RESERVE_TIME or SCSI_MAX_RESERVE_TOTALTIME (debug only)	0	0	0	1	True
Scsi.MaxReserveTime	Maximum time (in milliseconds) a system-initiated reservation is normally held	200	200	50	500	True
Scsi.MaxReserveTotalTime	Maximum time (in msecs) a system-initiated reservation normally takes from issue to release (debug only)	250	250	50	500	True
Scsi.NvmeAdjustLocalNSQDepth	Allow dividing the controller queue depth among the namespaces behind the controller for NVMe Local devices.	1	1	0	1	True
Scsi.NvmeMaxUnmapBlockDescriptorCount	Set maximum deallocate(unmap) descriptor count limit	0	0	0	256	True
Scsi.NvmeMaxUnmapLbaCount	Set maximum deallocate(unmap) size limit (in blocks)	0	0	0	4294967295	True
Scsi.NvmeProbeLogVerbose	Enable verbose logging during NVMe device discovery.	0	0	0	1	True
Scsi.PassthroughLocking	SCSI passthrough locking	1	1	0	1	True
Scsi.PcpusPerCompletionWorld	Allocate number of storage adapter completion worlds based on pcpus per world across NUMA nodes.	4	4	1	64	True
Scsi.ReserveBacktrace	Log a backtrace for all Reserve/Release pairs (debug only)	0	0	0	1	True
Scsi.SCSIBlockUnsupportedOpcodesAndPages	Enable or disable blocking unsupported SCSI opcodes and vpd/mode pages	1	1	0	1	True
Scsi.SCSIEnableDescToFixedConv	Enable or disable conversion of descriptor format sense to fixed for older plugins	1	1	0	1	True
Scsi.SCSIEnableDeviceLatencyHistogram	Enable or disable updation of device latency histograms	1	1	0	1	True
Scsi.SCSIStrictSPCVersionChecksForPEs	Only LUNs with version >= SCSI_ANSI_SCSI3_SPC4 can be PEs	0	0	0	1	True
Scsi.SCSITimeout_ReabortTime	Delay (in milliseconds) after a stop due to time-out before the stop is re-issued	5000	5000	1	99999999	True
Scsi.SCSITimeout_ScanTime	Time (in milliseconds) to sleep between checking for timed-out asynchronous I/O	1000	1000	1	99999999	True
Scsi.SCSIioTraceBufSizeMB	Logchannel buffer size for per device IO tracing in MB	1	1	1	2	True
Scsi.ScanOnDriverLoad	Scan new SCSI buses on device driver load	1	1	0	1	True
Scsi.ScanSync	Force LU scanning operations to be synchronous if set.	0	0	0	1	True
Scsi.ScsiAllowDeviceSpinup	Allow device spin up, if device is in spun down state.	1	1	0	1	True
Scsi.ScsiPathSplitUseSimpleCloneBuffer	Use simple clone buffers to split IOs at path layer whenever possible.	1	1	0	1	True
Scsi.ScsiRestartStalledQueueLatency	Delay in ms before restarting a stalled queue	500	500	1	60000	True
Scsi.ScsiTMHardTimeout	Timeout in milliseconds before signalling upper layers of wedged I/O (0 = Signalling disabled).	120000	120000	0	600000	True
Scsi.ScsiUseVPDXCopyInfo	Use Scsi VPD query for XCopy Info.	1	1	0	1	True
Scsi.ScsiVVolPESNRO	Default schedNumReqOutstanding value for a PE LUN.	256	256	32	4096	True
Scsi.TimeoutTMThreadExpires	Life in seconds of timeout task mgmt handler thread	1800	1800	1	86400	True
Scsi.TimeoutTMThreadLatency	Delay in ms before waking up new task mgmt thread	2000	2000	1	600000	True
Scsi.TimeoutTMThreadMax	Max number of timeout task-mgmt handler threads	16	16	1	16	True
Scsi.TimeoutTMThreadMin	Min number of timeout task-mgmt handler threads	1	1	1	16	True
Scsi.TimeoutTMThreadRetry	Delay in milliseconds before retrying taskmgmt which failed or for which the I/O did not complete	2000	2000	1000	10000	True
Scsi.TransFailLogPct	Percent of Transient failures seen on Scsi Device that will be logged.	20	20	0	100	True
Scsi.UseAdaptiveRetries	Use adaptive retries for transient errors.	1	1	0	1	True
Security.AccountLockFailures	Maximum allowed failed login attempts before locking out a user's account. Zero disables account locking.	5	5	N/A	N/A	False
Security.AccountUnlockTime	Duration in seconds to lock out a user's account after exceeding the maximum allowed failed login attempts.	900	900	N/A	N/A	False
Security.PasswordHistory	Number of passwords to remember for each user. Zero disables password history.	0	0	N/A	N/A	False
Security.PasswordMaxDays	Maximum number of days between password changes. Affects all existing and new users.	99999	99999	N/A	N/A	False
Security.PasswordQualityControl	Raw options for pam_passwdqc PAM module. This value is used as is in PAM's configuration file, so use with caution.	retry=3 min=disabled,disabled,disabled,7,7	retry=3 min=disabled,disabled,disabled,7,7	N/A	N/A	False
Security.SshSessionLimit	Maximum number of SSH sessions for all users except user 'root'.	50	50	N/A	N/A	False
SunRPC.MaxConnPerIP	Max number of TCP/IP connection per IP	32	32	1	256	True
SunRPC.SendLowat	Send buffer lowat (%)	25	25	1	100	True
SunRPC.SetNoDelayedAck	Set socket option to disable TCP delayed acknowledgements (Use this option under guidance of VMware support. Requires Remount)	0	0	0	1	True
SunRPC.WorldAffinity	TX Affinity: 0 - Disabled, 1 - Issuing world, 2 - Exact RX world, 3 - Loose RX world	2	2	0	2	True
SvMotion.SvMotionAvgDisksPerVM	Initial Storage vMotion Heap Size is proportional to this setting	8	8	4	1024	True
Syslog.global.auditRecord.remoteEnable	Enable transmitting audit records to remote hosts.	False	False	N/A	N/A	False
Syslog.global.auditRecord.storageCapacity	Audit record storage capacity (in MiB).	4	4	N/A	N/A	False
Syslog.global.auditRecord.storageDirectory	Audit record storage directory.	[] /scratch/auditLog	[] /scratch/auditLog	N/A	N/A	False
Syslog.global.auditRecord.storageEnable	Enable audit record storage.	False	False	N/A	N/A	False
Syslog.global.certificate.checkCRL	Enable checking the revocation status of all the certificates in an SSL certificate chain.	False	False	N/A	N/A	False
Syslog.global.certificate.checkSSLCerts	Enforce checking of SSL certificates when transmitting messages to remote hosts.	True	True	N/A	N/A	False
Syslog.global.certificate.strictX509Compliance	Enable strict compliance with X.509.	False	False	N/A	N/A	False
Syslog.global.defaultRotate	Number of older log files to keep.	8	8	N/A	N/A	False
Syslog.global.defaultSize	Size of each log file before switching to a new one (in KiB).	1024	1024	N/A	N/A	False
Syslog.global.droppedMsgs.fileRotate	Number of older dropped message log files to keep.	10	10	N/A	N/A	False
Syslog.global.droppedMsgs.fileSize	Size of each dropped message log file before switching to a new one (in KiB).	100	100	N/A	N/A	False
Syslog.global.logCheckSSLCerts	DEPRECATED - use Syslog.global.certificate.checkSSLCerts. Enforce checking of SSL certificates when transmitting messages to remote hosts.	True	True	N/A	N/A	False
Syslog.global.logDir	Datastore path of the directory to output logs to. Example: [datastoreName]/logdir	[] /scratch/log	[] /scratch/log	N/A	N/A	False
Syslog.global.logDirUnique	Enable placing log files in a unique subdirectory of logdir, based on hostname.	False	False	N/A	N/A	False
Syslog.global.logFilters	DESCRIPTION BREAKS FORMATTING			N/A	N/A	False
Syslog.global.logFiltersEnable	Enable the use of log filters.	False	False	N/A	N/A	False
Syslog.global.logHost	Comma (,) separated list of remote hosts to transmit messages to. Format is: proto://hostname	ipv4	'['ipv6']'[:port]. Protocol must be one of (tcp	udp	ssl). If a port is not provided, ssl and tcp will use 1514; udp will use 514.
Syslog.global.logLevel	Log filtering level. This should only be changed when troubleshooting an issue with the syslog daemon. Values may be 'debug' (most detailed level), 'info' (default detail level), 'warning' (only warnings or errors), or 'error' (only errors).	error	error	N/A	N/A	False
Syslog.global.msgQueueDropMark	The message queue drop mark (as a percentage).	90	90	N/A	N/A	False
Syslog.global.remoteHost.connectRetryDelay	Delay before retrying to connect to a remote host after a connection attempt has failed (in seconds).	180	180	N/A	N/A	False
Syslog.global.remoteHost.maxMsgLen	Maximum remote host transmission length (in bytes) when using the TCP and TLS (SSL) protocols. Messages longer than this will be truncated.	1024	1024	N/A	N/A	False
Syslog.global.vsanBacking	Allow the logging and audit record storage directories to be placed on a VSAN. WARNING! Enabling this parameter may cause ESXi to hang.	False	False	N/A	N/A	False
Syslog.loggers.LogEFI.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.LogEFI.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.Xorg.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.Xorg.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.apiForwarder.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.apiForwarder.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.attestd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.attestd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.auth.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.auth.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.clomd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.clomd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.clusterAgent.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.clusterAgent.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.cmmdsTimeMachine.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.cmmdsTimeMachine.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.cmmdsTimeMachineDump.rotate	Number of older log files to keep for this logger.	0	20	N/A	N/A	False
Syslog.loggers.cmmdsTimeMachineDump.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.cmmdsd.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.cmmdsd.size	Size of each log file before switching to another for this logger (in KiB).	0	5120	N/A	N/A	False
Syslog.loggers.crx-cli.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.crx-cli.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.dhclient.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.dhclient.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.dpd.rotate	Number of older log files to keep for this logger.	0	16	N/A	N/A	False
Syslog.loggers.dpd.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.envoy.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.envoy.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.epd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.epd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.esxcli.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.esxcli.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.esxgdpd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.esxgdpd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.esxtokend.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.esxtokend.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.esxupdate.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.esxupdate.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.etcd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.etcd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.fdm.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.fdm.size	Size of each log file before switching to another for this logger (in KiB).	0	5120	N/A	N/A	False
Syslog.loggers.gstored.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.gstored.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.healthd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.healthd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.healthdPlugins.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.healthdPlugins.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.hostd-probe.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.hostd-probe.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.hostd.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.hostd.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.hostdCgiServer.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.hostdCgiServer.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.hostprofiletrace.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.hostprofiletrace.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.infravisor.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.infravisor.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.iofiltervpd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.iofiltervpd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.ioinsight.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.ioinsight.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.keypersist.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.keypersist.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.kmxa.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.kmxa.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.kmxd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.kmxd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.lacp.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.lacp.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.lifecycle.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.lifecycle.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.loadESX.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.loadESX.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.localcli.rotate	Number of older log files to keep for this logger.	0	4	N/A	N/A	False
Syslog.loggers.localcli.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.metald.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.metald.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.nfcd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.nfcd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.osfsd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.osfsd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.rhttpproxy.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.rhttpproxy.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.sandboxd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.sandboxd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.sdrsInjector.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.sdrsInjector.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.settingsd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.settingsd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.shell.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.shell.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.sockrelay.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.sockrelay.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.spherelet.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.spherelet.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.storageRM.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.storageRM.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.swapobjd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.swapobjd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.syslog.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.syslog.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.trx.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.trx.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.usb.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.usb.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vdfs-proxy.rotate	Number of older log files to keep for this logger.	0	16	N/A	N/A	False
Syslog.loggers.vdfs-proxy.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vdfs-server.rotate	Number of older log files to keep for this logger.	0	16	N/A	N/A	False
Syslog.loggers.vdfs-server.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vdtc.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vdtc.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vitd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vitd.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vltd.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.vltd.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vmauthd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vmauthd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vmkdevmgr.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vmkdevmgr.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vmkernel.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vmkernel.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vmkeventd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vmkeventd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vmksummary.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vmksummary.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vmkwarning.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vmkwarning.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vobd.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vobd.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vprobe.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vprobe.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vpxa.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.vpxa.size	Size of each log file before switching to another for this logger (in KiB).	0	5120	N/A	N/A	False
Syslog.loggers.vsanEsxcli.rotate	Number of older log files to keep for this logger.	0	3	N/A	N/A	False
Syslog.loggers.vsanEsxcli.size	Size of each log file before switching to another for this logger (in KiB).	0	5120	N/A	N/A	False
Syslog.loggers.vsananalyticsevents.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.vsananalyticsevents.size	Size of each log file before switching to another for this logger (in KiB).	0	5120	N/A	N/A	False
Syslog.loggers.vsandevicemonitord.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vsandevicemonitord.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vsanesxcmd.rotate	Number of older log files to keep for this logger.	0	5	N/A	N/A	False
Syslog.loggers.vsanesxcmd.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vsanfs.configdump.rotate	Number of older log files to keep for this logger.	0	16	N/A	N/A	False
Syslog.loggers.vsanfs.configdump.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vsanfs.mgmt.rotate	Number of older log files to keep for this logger.	0	32	N/A	N/A	False
Syslog.loggers.vsanfs.mgmt.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vsanfs.vdfsop.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vsanfs.vdfsop.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vsanmgmt.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vsanmgmt.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vsansystem.rotate	Number of older log files to keep for this logger.	0	10	N/A	N/A	False
Syslog.loggers.vsansystem.size	Size of each log file before switching to another for this logger (in KiB).	0	10240	N/A	N/A	False
Syslog.loggers.vsantraceUrgent.rotate	Number of older log files to keep for this logger.	0	8	N/A	N/A	False
Syslog.loggers.vsantraceUrgent.size	Size of each log file before switching to another for this logger (in KiB).	0	1024	N/A	N/A	False
Syslog.loggers.vvold.rotate	Number of older log files to keep for this logger.	0	16	N/A	N/A	False
Syslog.loggers.vvold.size	Size of each log file before switching to another for this logger (in KiB).	0	8192	N/A	N/A	False
USB.arbitratorAutoStartDisabled	Disable automatic start of USB Arbitrator. If set USB passthrough will not be available until USB arbitrator is started at the command line.	0	0	0	1	True
USB.devsShared	Enable sharing (aka non-exclusive claiming) of USB devices with specified vendor and model ids. 0x0 is a wild card model which matches all models from the specified vendor. The string must contain colon delimited numeric fields, respectively the vendor_id and product id. If the latter is omitted from the last pair it is assumed to be 0x0.	0x04b3:0	0x04b3:0	N/A	N/A	True
USB.quirks	Additional USB device quirks to be added to the vmkusb native driver default quirks. Device quirks are software workarounds for hardware errata. String format is ::::, with colon delimited fields. vid and pid are the "usb id" numbers for the USB device vendor and product, respectively (and e.g., 0x0e0f for vendor VMware), and low and high rev are the revisions (inclusive) between which to apply the quirk (e.g., 0 and 0xffff). Quirk name is a string constant starting with UQ_. Contact VMware support for a full list of valid quirk names.			N/A	N/A	True
User.ReaddirRetries	Maximum number of retries when reading entries from directories	10	10	1	20	True
UserVars.ActiveDirectoryPreferredDomainControllers	Preferred Domain Controllers for Active Directory			N/A	N/A	True
UserVars.ActiveDirectoryVerifyCAMCertificate	Enable or disable verification of SSL certificate for vSphere Authentication Proxy server	1	1	0	1	True
UserVars.DcuiTimeOut	An idle time in seconds before DCUI is automatically logged out. Setting 0 disables the timeout.	600	600	0	86400	True
UserVars.ESXiShellInteractiveTimeOut	Idle time before an interactive shell is automatically logged out (in seconds, 0 disables). Takes effect only for newly logged in sessions.	0	0	0	86400	True
UserVars.ESXiShellTimeOut	Time before automatically disabling local and remote shell access (in seconds, 0 disables). Takes effect after the services are restarted.	0	0	0	86400	True
UserVars.ESXiVPsAllowedCiphers	ESXi VPs allowed ciphers. List of allowed ciphers to be used by the VPs. Must be in the form accepted by the SSL_CTX_set_cipher_list API.	!aNULL:kECDH+AESGCM:ECDH+AESGCM:RSA+AESGCM:kECDH+AES:ECDH+AES:RSA+AES	!aNULL:kECDH+AESGCM:ECDH+AESGCM:RSA+AESGCM:kECDH+AES:ECDH+AES:RSA+AES	N/A	N/A	True
UserVars.ESXiVPsDisabledProtocols	ESXi VPs disabled protocols. Choices are sslv3, tlsv1, tlsv1.1, tlsv1.2. By default sslv3 is disabled. If no protocol is specified, all protocols are enabled.	sslv3,tlsv1,tlsv1.1	sslv3,tlsv1,tlsv1.1	N/A	N/A	True
UserVars.EsximageNetRateLimit	Set the maximum rate, in bytes/sec, for downloading VIBs (0=no limit)	0	0	0	2147483647	True
UserVars.EsximageNetRetries	Set the number of times to retry in case of failure while downloading VIBs	10	10	0	1024	True
UserVars.EsximageNetTimeout	Set the timeout in seconds for downloading VIBs (0=no timeout)	60	60	0	1024	True
UserVars.HardwareHealthIgnoredSensors	List of comma-seperated sensor ID's to ignore for alarm generation.			N/A	N/A	True
UserVars.HardwareHealthSyncTime	Interval in minutes for periodic synchronization of hardware sensor state with VC alarm state. Setting 0 disables synchronization.	360	360	0	43200	True
UserVars.HostClientCEIPOptIn	Whether or not to opt-in for the Customer Experience Improvement Program in Host Client, 0 for ask, 1 for yes, 2 for no	0	0	0	2	True
UserVars.HostClientDefaultConsole	The default console to use when clicking on a VM screen shot in Host Client, WebMKS or VMRC	webmks	webmks	N/A	N/A	True
UserVars.HostClientEnableMOTDNotification	Whether or not to enable MOTD notification on login for Host Client	1	1	0	1	True
UserVars.HostClientEnableVisualEffects	Whether or not to enable visual effects for Host Client	1	1	0	1	True
UserVars.HostClientSessionTimeout	Default timeout for Host Client sessions in seconds	900	900	0	7200	True
UserVars.HostClientShowOnlyRecentObjects	Whether or not to show only recent objects in Host Client	1	1	0	1	True
UserVars.HostClientWelcomeMessage	The welcome message that is displayed when a user logs into the Host Client	Welcome to {{hostname}}	Welcome to {{hostname}}	N/A	N/A	True
UserVars.HostdStatsstoreRamdiskSize	Explicitly specify size for the ramdisk hostd uses to store stats (in megabytes, 0 default). Takes effect after hostd service is restarted.	0	0	0	1024	True
UserVars.ProductLockerLocation	Path to VMware Tools and vSphere Client repository	/locker/packages/vmtoolsRepo/	/locker/packages/vmtoolsRepo/	N/A	N/A	True
UserVars.SuppressCoredumpWarning	Do not show warning for disabled or unconfigured coredump target	0	1	0	1	True
UserVars.SuppressHyperthreadWarning	Do not show warning for potential security vulnerability due to hyperthreading	0	0	0	1	True
UserVars.SuppressSgxDisabledWarning	Do not show warning for SGX disabled due to Intel Errata CFW101.	0	0	0	1	True
UserVars.SuppressShellWarning	Do not show warning for enabled local and remote shell access	0	1	0	1	True
UserVars.ToolsRamdisk	Use VMware Tools repository from /tools ramdisk.	0	0	0	1	True
VFLASH.CacheStatsEnable	Vitual Flash Read Cache statistics enable ?	1	1	0	1	True
VFLASH.CacheStatsFromVFC	Use cache statistics from virtual Flash Read Cache module ?	1	1	0	1	True
VFLASH.MaxCacheFileSizeMB	Maximum file size (in MB) of virtual Flash Read supported	409600	409600	4	409600	True
VFLASH.MaxDiskFileSizeGB	Maximum supported disk size (in GB) with virtual Flash Read Cache configuration	16384	16384	0	16384	True
VFLASH.MaxHeapSizeMB	Maximum size (in MB) to which the virtual flash heap is allowed to grow	32	32	16	128	True
VFLASH.MaxResourceGBForVmCache	Maximum supported virtual flash resource (in GB) to be allocated for VM caches	2048	2048	N/A	N/A	False
VFLASH.ResourceUsageThreshold	Threshold (in percentage) of virtual flash resource usage	80	80	N/A	N/A	False
VMFS.UnresolvedVolumeLiveCheck	Enable/disable liveliness check during unresolved volume query.	False	False	N/A	N/A	False
VMFS3.EnableBlockDelete	Enable VMFS block delete when UNMAP is issued from guest OS	0	0	0	1	True
VMFS3.FailVolumeOpenIfAPD	Fail VMFS volume open operation if the underlying device is deemed to be under an all-paths-down condition	0	0	0	1	True
VMFS3.GBLAllowMW	Enable support for more than 8 hosts using multi-writer mode locks on virtual-disks	1	1	0	1	True
VMFS3.HardwareAcceleratedLocking	Enable hardware accelerated VMFS locking (requires compliant hardware). Please see http://kb.vmware.com/kb/2094604 before disabling this option	1	1	0	1	True
VMFS3.LFBCSlabSizeMaxMB	Maximum size (in MB) to which the VMFS affinity manager cluster cache is allowed to grow.	8	8	1	128	True
VMFS3.MaxAddressableSpaceTB	Maximum size of all open files that VMFS cache will support before eviction mechanisms kick in	32	32	32	128	True
VMFS3.MaxHeapSizeMB	Maximum size (in MB) to which the VMFS heap is allowed to grow	768	768	16	768	True
VMFS3.MaxextendedTxnsUsingfs3Heap	Maximum number of extended transactions for which log space can be allocated from VMFS3 heap when the extendedTxnRegion is full	20	20	20	40	True
VMFS3.MinAddressableSpaceTB	Minimum size of all open files that VMFS cache will support (guaranteed)	0	0	0	10	True
VMFS3.OpenWithoutJournal	Open file system when out of space for journal allocation, allowing reads and no meta-data updates	1	1	0	1	True
VMFS3.PBCapMissRatioIntervalSec	Frequency (in seconds) that the Capacity Miss Ratio is computed for the VMFS Pointer Block cache.	60	60	1	1800	True
VMFS3.StAtExclLockEnd	Generate Back Trace in FS3_EndIOExclusive	0	0	0	1	True
VMFS3.UseATSForHBOnVMFS5	Use ATS for Heartbeat on ATS supported VMFS5 volumes	1	1	0	1	True
VMkernel.Boot.allowCoreDumpOnUsb	Enable/Disable creation of core dump file on USB devices.	False	False	N/A	N/A	False
VMkernel.Boot.atsSupport	Enable/Disable PCIe Address Translation Services	True	True	N/A	N/A	False
VMkernel.Boot.autoCreateDumpFile	If enabled and if no suitable dump partition or dump file exists, create a dump file.	True	True	N/A	N/A	False
VMkernel.Boot.autoPartition	Enable/Disable auto-partitioning of empty local disks.	False	False	N/A	N/A	False
VMkernel.Boot.autoPartitionCreateUSBCoreDumpPartition	Enable/Disable auto-partitioning of core dump partition for USB boot devices. Requires that autoPartition is set to TRUE as well.	False	False	N/A	N/A	False
VMkernel.Boot.autoPartitionDiskDumpPartitionSize	Disk dump partition size in MB that gets configured during the auto-partition process.	2560	2560	0	4294967295	False
VMkernel.Boot.bootDeviceRescanTimeout	Boot device rescan timeout (in minutes).	1	1	N/A	N/A	False
VMkernel.Boot.busSpeedMayVary	Allow different APIC timer speeds on different CPUs.	False	False	N/A	N/A	False
VMkernel.Boot.cacheFlushImmOnAllHalt	Flush caches immediately if all cores sharing LLC halt (AMD only)	False	False	N/A	N/A	False
VMkernel.Boot.checkCPUIDLimit	Refuse to run on CPUID limited cpus.	True	True	N/A	N/A	False
VMkernel.Boot.checkPages	Check that free and free-lpage-pool pages are not corrupted.	False	False	N/A	N/A	False
VMkernel.Boot.com1_baud	Baud rate for COM1 (0 -> automatic)	0	0	0	4294967295	False
VMkernel.Boot.com2_baud	Baud rate for COM2 (0 -> automatic)	0	0	0	4294967295	False
VMkernel.Boot.debugBreak	Break into debugger during vmkernel initialization.	False	False	N/A	N/A	False
VMkernel.Boot.debugLogToSerial	0=Serial debug logging off, 1=Serial debug logging on, 2=Defer to config option DebugLogToSerial.	2	2	0	4294967295	False
VMkernel.Boot.deviceBindParallel	Enable parallel binding of devices across drivers in the device manager.	True	True	N/A	N/A	False
VMkernel.Boot.disableACSCheck	Bypass ACS capability checks on all PCIE devices	False	False	N/A	N/A	False
VMkernel.Boot.disableCFOH	Disable Cache Flush on Halt	False	False	N/A	N/A	False
VMkernel.Boot.disableHwrng	Disable hardware random number generator (RDRAND, RDSEED)	False	False	N/A	N/A	False
VMkernel.Boot.diskDumpSlotSize	Disk dump slot size in MB. 0 = automatically sized, otherwise requested size >= 100 MB.	0	0	0	4294967295	False
VMkernel.Boot.dmaEngineExposeIdentityMapping	Whether to expose whether DMA engines do identity mapping.	True	True	N/A	N/A	False
VMkernel.Boot.dmaMapperPolicy	DMA mapping policy to use.	disabled	disabled	N/A	N/A	False
VMkernel.Boot.dumpSize	Maximum core dump file size in MB. Used for automatic core dump file creation. 0 = automatically sized.	0	0	0	4294967295	False
VMkernel.Boot.enableACSCheckForRP	Enable ACS capability checks for Root Port	False	False	N/A	N/A	False
VMkernel.Boot.execInstalledOnly	Execute only those files that have been installed via a vib package and have not been modified.	False	False	N/A	N/A	False
VMkernel.Boot.fakePMemPct	Amount of fake persistent memory (in pct of all volatile memory)	0	0	N/A	N/A	False
VMkernel.Boot.forceHyperthreadingMitigation	Restrict the simultaneous use of logical processors from the same hyperthreaded core regardless of detected security vulnerabilities.	False	False	N/A	N/A	False
VMkernel.Boot.fsCheck	Run filesystem checks on system partitions.	False	False	N/A	N/A	False
VMkernel.Boot.gdbPort	gdb port; com1 or com2	default	default	N/A	N/A	False
VMkernel.Boot.heapCheckTimerInterval	Interval in seconds between heap timer checks	10	10	0	4294967295	False
VMkernel.Boot.heapFreeOwnerCheck	Check heap ownership on free operations	False	False	N/A	N/A	False
VMkernel.Boot.heapFreePoisonByte	Byte pattern used to poison freed memory	255	255	N/A	N/A	False
VMkernel.Boot.heapMetaPoisonByte	Byte pattern used to poison red zones for allocations	90	90	N/A	N/A	False
VMkernel.Boot.heapMetadataProtect	Use poisoned red zones to protect against under/overruns	False	False	N/A	N/A	False
VMkernel.Boot.heapPoisonFreeMem	Poison free memory to catch use after free bugs	False	False	N/A	N/A	False
VMkernel.Boot.heapPoisonTimerChecks	Check heap poisoned areas for corruption on regular intervals	False	False	N/A	N/A	False
VMkernel.Boot.hyperthreading	Enable hyperthreading if available.	True	True	N/A	N/A	False
VMkernel.Boot.hyperthreadingMitigation	Restrict the simultaneous use of logical processors from the same hyperthreaded core as necessary to mitigate a security vulnerability.	False	False	N/A	N/A	False
VMkernel.Boot.hyperthreadingMitigationIntraVM	Restrict the simultaneous use of logical processors from the same hyperthreaded core as necessary to mitigate a security vulnerability within a single VM.	True	True	N/A	N/A	False
VMkernel.Boot.ignoreMsrFaults	Ignore general protection faults as a result of rdmsr and wrmsr instructions	False	False	N/A	N/A	False
VMkernel.Boot.intrBalancingEnabled	Indicates if interrupt balancing is enabled.	True	True	N/A	N/A	False
VMkernel.Boot.ioAbilityChecks	Enforce checking of whether regions can be DMA mapped.	False	False	N/A	N/A	False
VMkernel.Boot.iovDisableIR	Disable Interrupt Remapping in the IOMMU.	False	False	N/A	N/A	False
VMkernel.Boot.ipmiEnabled	Enable IPMI	True	True	N/A	N/A	False
VMkernel.Boot.isPerFileSchedModelActive	Enable per file scheduling model on this host	True	True	N/A	N/A	False
VMkernel.Boot.leaveWakeGPEsDisabled	Disallow a wake GPE from also being a runtime GPE	True	True	N/A	N/A	False
VMkernel.Boot.logEFILevel	Log level for LogEFI.	1	1	N/A	N/A	False
VMkernel.Boot.logPort	Serial port to enable for logging; com1 or com2	default	default	N/A	N/A	False
VMkernel.Boot.maxLogEntries	Size of the kernel log buffer in 256-byte lines. 0=Use default. Min is 1024. Max is 32768.	0	0	0	4294967295	False
VMkernel.Boot.maxPCPUS	Number of PCPUs vmkernel should use.	1024	1024	0	4294967295	False
VMkernel.Boot.maxPCPUsNUMAInterleaving	Enable NUMA-node interleaving of enabled PCPUs.	True	True	N/A	N/A	False
VMkernel.Boot.maxVMs	Max number of VMs VMKernel should support. 0 == determine at runtime	0	0	0	4294967295	False
VMkernel.Boot.memCheckEveryWord	Check every single word when checking mem.	False	False	N/A	N/A	False
VMkernel.Boot.memLowReservedMB	Amount of low memory (< 4 GB) which gets reserved. 0 == determine at runtime	0	0	0	4294967295	False
VMkernel.Boot.memmapMaxEarlyPoisonMemMB	Memory that should be poisoned during early initialization.	65536	65536	0	4294967295	False
VMkernel.Boot.memmapMaxPhysicalMemMB	Maximum physical memory (in MB) addressable by kernel, used to calculate the cut-off MPN, when added to the first valid memory MPN.	0	0	-9223372036854775808	9223372036854775807	False
VMkernel.Boot.memmapMaxRAMMB	Maximum conventional memory (RAM) supported on the system. Additional RAM above this limit will not be used by the system.	33585088	33585088	0	4294967295	False
VMkernel.Boot.microcodeUpdate	Update microcode from boot module if available	True	True	N/A	N/A	False
VMkernel.Boot.microcodeUpdateForce	Disable check that microcode update is newer than installed microcode and that both are released versions	False	False	N/A	N/A	False
VMkernel.Boot.netCoalesceTimerHdlrPcpu	Pcpu that coalesce timeout handler runs on.	0	0	0	4294967295	False
VMkernel.Boot.netGPHeapMaxMBPerGB	Maximum MB of the general purpose networking heap to be allocated per GB of physical memory.	4	4	0	4294967295	False
VMkernel.Boot.netMaxPktsToProcess	Maximum number of packets to process in each invocation packet processing routine	64	64	0	4294967295	False
VMkernel.Boot.netMaxPktsToRelease	Maximum number of packets to release in each invocation packet releasing routine	128	128	0	4294967295	False
VMkernel.Boot.netNetqueueEnabled	Enable/Disable NetQueue support.	True	True	N/A	N/A	False
VMkernel.Boot.netNetqueueEnblSwlroWithPnicHwlro	Enable/Disable SWLRO for PNIC with HWLRO. Requires REBOOT.	True	True	N/A	N/A	False
VMkernel.Boot.netNetqueueMaxFiltersPerUplink	Maximum number of netqueue filters for Uplink. Maximum value for this setting is 32768. Requires REBOOT.	4096	4096	0	4294967295	False
VMkernel.Boot.netNetqueueMaxLearnedFilters	Maximum number of hostwide netqueue learned filters. Maximum value for this setting is 16384. Requires REBOOT.	9216	9216	0	4294967295	False
VMkernel.Boot.netNetqueueMaxStaticFilters	Maximum number of hostwide netqueue static filters. Maximum value for this setting is 16384. Requires REBOOT.	10240	10240	0	4294967295	False
VMkernel.Boot.netPagePoolLimitCap	Maximum number of pages period for the packet page pool.	1048576	1048576	0	4294967295	False
VMkernel.Boot.netPagePoolLimitPerGB	Maximum number of pages for the packet page pool per gigabyte.	5120	5120	0	4294967295	False
VMkernel.Boot.netPagePoolResvCap	Maximum number of pages to reserve for the packet page pool.	0	0	0	4294967295	False
VMkernel.Boot.netPagePoolResvPerGB	Number of pages to reserve for the packet page pool per gigabyte.	0	0	0	4294967295	False
VMkernel.Boot.netPktHeapMaxMBPerGB	Maximum MB of low-memory packet heap to be allocated per GB of physical memory. Maximum value for this setting is 512.	6	6	0	4294967295	False
VMkernel.Boot.netPktHeapMinMBPerGB	Minimum MB of low-memory packet heap to be allocated per GB of physical memory. Maximum value for this setting is 512.	0	0	0	4294967295	False
VMkernel.Boot.netPktPoolMaxMBPerGB	Maximum MB of networking packet buffer pool to be allocated per GB of physical memory. Maximum value for this setting is 512. Net packet pool maximum per system will be at least 656MB.	75	75	0	4294967295	False
VMkernel.Boot.netPktPoolMinMBPerGB	Minimum MB of networking packet buffer pool to be allocated per GB of physical memory (multiple of 24)	0	0	0	4294967295	False
VMkernel.Boot.netPreemptionEnabled	Enable/disable preemption support in overall networking area	True	True	N/A	N/A	False
VMkernel.Boot.nmiAction	Action on hardware generated NMI: 0=default (panic, unless changed by advanced config option), 1=enter debugger, 2=panic, 3=log and ignore (not recommended), 4=log and ignore if undiagnosed	0	0	0	4294967295	False
VMkernel.Boot.numSpareCoresPerLLC	Number of spare cores reserved at boot time per last-level cache (LLC)	0	0	0	4294967295	False
VMkernel.Boot.numaLatencyRemoteThresholdPct	Maximum measured memory access latency difference (in percent units) between 2 pairs of NUMA nodes for the pairs to be considered equidistant	10	10	0	4294967295	False
VMkernel.Boot.overrideDuplicateImageDetection	Override duplicate ESXi image detection	False	False	N/A	N/A	False
VMkernel.Boot.pciBarAllocPolicy	PCI BAR allocation policy; 0=first-fit, 1=smallest-fit, 2=BAR-fit	2	2	0	4294967295	False
VMkernel.Boot.pcipDisablePciErrReporting	Disable error reporting for PCI passthru devices.	True	True	N/A	N/A	False
VMkernel.Boot.poisonMarker	Value used to poison memmap pages	-6148914691236517206	-6148914691236517206	-9223372036854775808	9223372036854775807	False
VMkernel.Boot.poisonPagePool	Poison memmap pages	False	False	N/A	N/A	False
VMkernel.Boot.preventFreePageMapping	Prevent mapping of free pages	False	False	N/A	N/A	False
VMkernel.Boot.rdmaRoceIPBasedGidGeneration	Use the new IP-based GID generation for RoCE.	True	True	N/A	N/A	False
VMkernel.Boot.rdmaUseTeamingPolicy	Use teaming policy for rdma connection.	True	True	N/A	N/A	False
VMkernel.Boot.rtcEnableEFI	Enable UEFI Runtime Services as real time clock	True	True	N/A	N/A	False
VMkernel.Boot.rtcEnableLegacy	Enable legacy CMOS device as real time clock	True	True	N/A	N/A	False
VMkernel.Boot.rtcEnableTAD	Enable ACPI 5.0 Time and Alarm Device as real time clock	True	True	N/A	N/A	False
VMkernel.Boot.scrubIgnoredPages	Check pages that were ignored due to vmbIgnoreStartMPN and vmbIgnoreNumMPNs boot options.	False	False	N/A	N/A	False
VMkernel.Boot.scrubMemoryAfterModuleLoad	Check all memory after each module load. This causes booting to be very slow.	False	False	N/A	N/A	False
VMkernel.Boot.serialUntrusted	Disable serial port if UART misbehaves.	True	True	N/A	N/A	False
VMkernel.Boot.skipPartitioningSsds	If enabled, skip auto-partitioning of empty local SSDs.	False	False	N/A	N/A	False
VMkernel.Boot.storAdptrMultCplWrldsPerNuma	Pcpu Based multiple adapter completion worlds per Numa	True	True	N/A	N/A	False
VMkernel.Boot.storageHeapMaxSize	Maximum size in bytes of the main storage heap	0	0	0	4294967295	False
VMkernel.Boot.storageHeapMinSize	Minimum size in bytes of the main storage heap	0	0	0	4294967295	False
VMkernel.Boot.storageMaxDevices	Maximum number of supported SCSI devices	1024	1024	0	4294967295	False
VMkernel.Boot.storageMaxPaths	Maximum number of supported SCSI paths	4096	4096	0	4294967295	False
VMkernel.Boot.storageMaxVMsPerDevice	Maximum number of VMs expected to use a given device	32	32	0	4294967295	False
VMkernel.Boot.terminateVMOnPDL	Terminate virtual machine on permanent loss of storage	False	False	N/A	N/A	False
VMkernel.Boot.timerEnableACPI	Enable ACPI PM timer as system reference timer.	True	True	N/A	N/A	False
VMkernel.Boot.timerEnableHPET	Enable HPET as system reference timer.	True	True	N/A	N/A	False
VMkernel.Boot.timerEnableTSC	Enable TSC as system reference timer.	True	True	N/A	N/A	False
VMkernel.Boot.timerForceTSC	Always use TSC as system reference timer.	True	True	N/A	N/A	False
VMkernel.Boot.tscSpeedMayVary	Allow different TSC speeds on different CPUs.	False	False	N/A	N/A	False
VMkernel.Boot.tty1Port	TTY1 port; com1, com2 ... to enable	default	default	N/A	N/A	False
VMkernel.Boot.tty2Port	TTY2 port; com1, com2 ... to enable	default	default	N/A	N/A	False
VMkernel.Boot.updateBusIRQ	Allow adding/removing busIRQ information	False	False	N/A	N/A	False
VMkernel.Boot.useNUMAInfo	Enable/disable NUMA-ness	True	True	N/A	N/A	False
VMkernel.Boot.useReliableMem	System is aware of reliable memory.	True	True	N/A	N/A	False
VMkernel.Boot.useSLIT	Use NUMA latency information from the SLIT table if available	True	True	N/A	N/A	False
VMkernel.Boot.vmkATKeyboard	Enable VMkernel AT keyboard driver.	False	False	N/A	N/A	False
VMkernel.Boot.vmkacEnable	0=Disabled, 1=Enforcing, 2=Do not enforce, just warn	1	1	N/A	N/A	False
VMkernel.Boot.vmmrEnable	Enable/Disable vmmr, vmkernel monitoring of x86 host-wide and per-vm stats. 0=Disable, 1=Enable	True	True	N/A	N/A	False
VMkernel.Boot.vtdSuperPages	Enable support for VT-d Super Pages (aka 2MB, 1GB large pages); super-page usage is dependent on this option as well as hardware support.	True	True	N/A	N/A	False
VMkernel.Boot.x2ApicPreferred	Use x2APIC if available, even with less than 256 cpus.	True	True	N/A	N/A	False
VSAN-iSCSI.iscsiPingTimeout	Interval between ping (NOP-Out) requests, in seconds	5	5	0	60	True
VSAN.AutoRestoreDecomState	Whether to restore vSAN node decommission state automatically during vSAN refresh	1	1	0	1	True
VSAN.AutoTerminateGhostVm	Automatically terminate ghost VM(s) during network partition	1	1	0	1	True
VSAN.ClomForceProvisionPlacements	Add Force provisioning flag for all new object placement requests	0	0	0	1	True
VSAN.ClomMaxComponentSizeGB	Maximum component size used for new placements	255	255	10	255	True
VSAN.ClomMaxDiskUsageRepairComps	Percentage disk fullness after which no new repair components can be placed on a given disk	95	95	0	100	True
VSAN.ClomRebalanceThreshold	Percentage disk fullness after which rebalancing is triggered	80	80	0	100	True
VSAN.DedupScope	The default deduplication scope for in all-flash disk group	0	0	0	3	True
VSAN.DefaultHostDecommissionMode	Default host decommission mode for a given node	ensureAccessibility	ensureAccessibility	N/A	N/A	True
VSAN.DomBriefIoTraces	Enables a brief set of per-IO DOM traces for debugging	0	0	0	1	True
VSAN.DomFullIoTraces	Enables the full set of per-IO DOM traces for debugging	0	0	0	1	True
VSAN.DomLongOpTraceMS	Trace ops that take more than the specified value in milliseconds	1000	1000	0	600000	True
VSAN.DomLongOpUrgentTraceMS	Urgent trace ops that take more than the specified value in milliseconds	10000	10000	0	600000	True
VSAN.MaxComponentsPerWitness	Maximum number of components for a witness host	0	0	0	320000	True
VSAN.MaxWitnessClusters	Max number of clusters on a witness node	0	0	0	64	True
VSAN.ObjectScrubsPerYear	Option to set the scrubbing rate as scrubs-per-year	0	0	0	525600	True
VSAN.ObjectScrubsPerYearBase	Maximum scrubs-per-year of an object for disk group utilization based scrubbing.	36	36	1	525600	True
VSAN.PerTraceBandwidthLimit	Max number of traces per second (0 to disable limits)	0	0	0	1000000	True
VSAN.PerTraceBandwidthLimitPeriodMs	Add BANDWIDTH_LIMIT * PERIOD_MS tokens (traces) every PERIOD_MS.	10000	10000	0	10000000	True
VSAN.PerTraceMaxRolloverPeriods	Maximum number of periods where unused bandwidth can accumulate	360	360	0	1000000	True
VSAN.RDTChecksumMode	Checksum mode for RDT-level checksum	0	0	0	3	True
VSAN.TraceEnableCmmds	Enables tracing for vSAN CMMDS and CMMDSResolver components	1	1	0	1	True
VSAN.TraceEnableDom	Enables tracing for vSAN DOM component	1	1	0	1	True
VSAN.TraceEnableDomIo	Enables tracing for vSAN DOMIO component	0	0	0	1	True
VSAN.TraceEnableLsom	Enables tracing for vSAN LSOM component	1	1	0	1	True
VSAN.TraceEnableLsomIo	Enables IO tracing for vSAN LSOM component	0	0	0	1	True
VSAN.TraceEnablePlog	Enables tracing for vSAN PLOG component	1	1	0	1	True
VSAN.TraceEnableRdt	Enables tracing for vSAN RDT component	1	1	0	1	True
VSAN.TraceEnableSsdLog	Enables tracing for vSAN SSDLOG component	1	1	0	1	True
VSAN.TraceEnableVirsto	Enables tracing for vSAN Virsto component	1	1	0	1	True
VSAN.TraceEnableVirstoIo	Enables IO tracing for vSAN Virsto component	0	0	0	1	True
VSAN.TraceEnableVsanSparse	Enables tracing for VsanSparse FDS operations	1	1	0	1	True
VSAN.TraceEnableVsanSparseIO	Enables tracing for VsanSparse I/O operations	0	0	0	1	True
VSAN.TraceEnableVsanSparseVerbose	Enables tracing for details of VsanSparse I/O operations	0	0	0	1	True
VSAN.TraceGlobalBandwidthLimit	Max number of traces per second (0 to disable limits)	0	0	0	1000000	True
VSAN.TraceGlobalBandwidthLimitPeriodMs	Add BANDWIDTH_LIMIT * PERIOD_MS tokens (traces) every PERIOD_MS.	10000	10000	0	10000000	True
VSAN.TraceGlobalMaxRolloverPeriods	Maximum number of periods where unused bandwidth can accumulate	360	360	0	1000000	True
VSAN.TracesPerErrorBandwidthLimit	Maximum number of traces per second during specific error conditions (0 to disable limits)	1000	1000	0	1000000	True
VSAN.TracesPerErrorBandwidthLimitPeriodMs	Add BANDWIDTH_LIMIT * PERIOD_MS tokens (traces) every PERIOD_MS	10000	10000	0	10000000	True
VSAN.TracesPerErrorMaxRolloverPeriods	Maximum number of periods where unused bandwidth can accumulate	60	60	0	1000000	True
VSAN.TrimDisksBeforeUseGranularity	Trim the devices (if supported) before using for vSAN. 0=Disable, 1=MetaData only, 2=Full Disk	0	0	0	2	True
VSAN.VsanSparseCacheOverEvict	Percentage of VsanSparseCacheThreshold to add to eviction	5	5	0	100	True
VSAN.VsanSparseCacheThreshold	Maximum VsanSparse cache size, in cache entries	1024	1024	0	4294967295	True
VSAN.VsanSparseEnabled	Enable auto-creation of vsanSparse instead of vmfsSparse redologs, for vSAN 2.0 datastore only.	1	1	0	1	True
VSAN.VsanSparseHeapSize	Maximum heap size for VsanSparse snapshot consolidation buffers (in KiB)	65536	65536	256	131072	True
VSAN.VsanSparseMaxExtentsPrefetch	Maximum number of extents to fetch during interrogation	64	64	0	128	True
VSAN.VsanSparseParallelLookup	Request written extent data from each layer in parallel	1	1	0	1	True
VSAN.VsanSparseRetainCacheOnSnapshots	Try to retain VsanSparse in-memory cache content when taking VM snapshots	1	1	0	1	True
VSAN.VsanSparseRetainCacheTTL	Maximum time to retain VsanSparse in-memory cache content between snapshots, in seconds	20	20	0	3600	True
VSAN.VsanSparseSpeculativePrefetch	Number of bytes to add to each extent interrogation request	4194304	4194304	0	4294967295	True
VSAN.WriteZeroOnTrimUnsupported	Enable Writing Zero's on capacity devices that do not support TRIM	0	0	0	1	True
VVOL.vvolConcurrentBatchUnbind	Number of concurrent batch unbind requests	2	2	1	20	True
VVOL.vvolMaxRBZRetries	Maximum number of times RBZ is retried during Rebind	100	100	20	600	True
VVOL.vvolSpaceStatsCacheSize	Size of the swap VVOL cache in (must be <= 1024) VVOLD	512	512	0	1024	True
VVOL.vvolUnbindBatchSize	Batch size for the Batch unbinding for VVOLs	16	16	2	256	True
Virsto.DiskFormatVersion	Virsto Disk Format version	15	15	2	15	True
Virsto.Enabled	Use Virsto format for new disks	1	1	1	1	True
Virsto.FlusherRegistryThreshold	Flusher registry data size threshold (percentage) when metadata flush is forced	95	95	50	100	True
Virsto.GweFetchExtentsFactor	Multiplier controlling how many on-disk extents fetched based on GWE request size	3	3	1	10	True
Virsto.InstanceHeapLimit	Heap limit for each Virsto instance (disk) in MB	130	130	128	4095	True
Virsto.MapBlocksFlushThreshold	A threshold for dirty entries of map block cache when metadata flush is forced (in count of 4KB blocks)	90	90	50	100	True
Virsto.MapBlocksMin	Map block cache minimum for each Virsto instance (in count of 4KB blocks)	16384	16384	16	4294967295	True
Virsto.MaxMFRetryCount	How many times Virsto metadata flusher retries in case of a transient error.	3	3	0	4294967295	True
Virsto.MsecBeforeMetaFlush	Force Virsto metadata flush after this many msec	10000	10000	0	86400000	True
Virsto.RecordsPerFormatWrite	Number of (LSAR) records written per format write operation	16	16	1	128	True
Virsto.SharedHeapLimit	Shared heap limit for Virsto module in MB	4	4	2	4095	True
XvMotion.VMFSOptimizations	Enable VMFS-specific IO optimizations	1	1	0	1	True