Makefile

# **编译选项在这里修改**
# TARGET 只可以取LINUX, OPENWRT两个选项
# LINUX 为*nix系列系统编译
# OPENWRT 专为 openwrt 路由器系统编译，并且会生成 ipk 安装包, NOTE 选择 OPENWRT 时，
# 需要确定 MIPS 的大小端
TARGET := LINUX
# 只有当T ARGET 为 OPENWRT 才定义MIPS，默认为 MSB
# 大端: MSB; 小端: LSB
MIPS := MSB
# 下面是高级选项
# 如果是, 就取 DEBUG，否则就是空
IS_DEBUG :=
# 如果是, 就取 GUI，否则就是空
IS_GUI :=
# 交叉编译，在 TARGET 选为 OPENWRT 并且制定 MIPS 时会自动确定 CROSS 的值
# e.g. CROSS := mips-openwrt-linux-
CROSS :=
# **编译选项到此**

RM := rm -rf
CP := cp -r
MKDIR := mkdir -p
SED := sed

CC := gcc

VERSION := 0.0.4.1
CONFIG	 := ./drcomrc
ifneq "$(IS_GUI)" ""
    RES := resource
    ICON_PATH := $(RES)/icon.png
endif #IS_GUI == ""

ifeq ($(TARGET), OPENWRT)
    ifeq ($(MIPS), MSB)
        CROSS := mips-openwrt-linux-
        VERSION := $(VERSION)-openwrt-msb
    else
        CROSS := mipsel-openwrt-linux-
        VERSION := $(VERSION)-openwrt-lsb
    endif #MIPS == MSB
else
    VERSION := $(VERSION)-linux-amd64
endif #CC == gcc

CC := $(CROSS)$(CC)
APP := Drcom4CWNU-$(VERSION)

CFLAGS_GUI	:= `pkg-config --cflags gtk+-2.0` -DICON_PATH=\"$(ICON_PATH)\" -DGUI
LDFLAGSS_GUI	:= `pkg-config --libs gtk+-2.0`
CFLAGS_DEBUG	:= -DDEBUG -g -O0 -Wall -Wno-unused
LDFLAGS_DEBUG	:=
CFLAGS_RELEASE	:= -O2 -W -g

OBJS	:= md5.o config.o common.o eapol.o drcom.o
CFLAGS	:= -DCONF_PATH=\"$(CONFIG)\" -DVERSION=\"$(VERSION)\" -std=gnu99
LDFLAGS :=

ifeq ($(findstring gcc, $(CC)), gcc)
ifeq ($(TARGET), LINUX)
    CFLAGS_DEBUG += -pg
    LDFLAGS_DEBUG += -pg
endif
endif

ifeq ($(TARGET), OPENWRT)
    IPK := ipk
endif


ifeq ($(IS_DEBUG), DEBUG)
    CFLAGS += $(CFLAGS_DEBUG)
    LDFLAGS += $(LDFLAGS_DEBUG)
else
    CFLAGS += $(CFLAGS_RELEASE)
endif

ifeq ($(IS_GUI), GUI)
    CFLAGS += $(CFLAGS_GUI)
    LDFLAGS += $(LDFLAGSS_GUI)
    OBJS += main_gui.o gui.o
else
    OBJS += main_cli.o wrap_eapol.o dhcp.o
endif

all: drcom $(IPK)

drcom: $(OBJS)
	$(CC) -o $@ $^ $(LDFLAGS)
%.o: %.c
	$(CC) -c $^ $(CFLAGS)

#打包源代码
tar: *.c *.h drcomrc.example Makefile $(RES)
	if [ ! -e $(APP) ]; then \
		$(MKDIR) $(APP); \
	fi
	$(CP) $^ $(APP)
	tar -Jcvf $(APP).tar.xz $(APP)
	$(RM) $(APP)

#打包编译好的程序
release: all drcomrc.example $(RES) $(WIN_DLLS) $(APP)
	$(CP) drcom drcomrc.example $(APP)
	zip -r $(APP).zip $(APP)

$(APP):
	if [ ! -e $(APP) ]; then \
		$(MKDIR) $(APP); \
	fi

$(RES): $(APP)
	$(CP) $(RES) $(APP)

install: drcom
	if [ ! -e dist ]; then \
		$(MKDIR) dist; \
	fi
	$(CP) drcom drcomrc.example dist

$(IPK): drcom random_mac
	$(MKDIR) ./usr/lib/lua/luci/controller/
	$(MKDIR) ./usr/lib/lua/luci/model/cbi/
	$(MKDIR) ./etc/config/
	$(MKDIR) ./etc/init.d/
	$(MKDIR) ./etc/rc.d/
	$(MKDIR) ./overlay/Drcom4CWNU/
	$(MKDIR) ./usr/bin/
	$(CP) openwrt/luci/Drcom4CWNU.reg.lua     ./usr/lib/lua/luci/controller/Drcom4CWNU.lua
	$(CP) openwrt/luci/Drcom4CWNU.cbi.lua     ./usr/lib/lua/luci/model/cbi/Drcom4CWNU.lua
	$(CP) openwrt/luci/drcomrc.etc            ./etc/config/drcomrc
	$(CP) openwrt/scripts/drcom.sh            ./etc/init.d/drcom.sh
	chmod +x                                  ./etc/init.d/drcom.sh
	$(CP) openwrt/scripts/drcom-daemon.sh     ./etc/init.d/drcom-daemon
	chmod +x                                  ./etc/init.d/drcom-daemon
	ln -sf /etc/init.d/drcom-daemon           ./etc/rc.d/S98drcom-daemon
	$(CP) openwrt/scripts/wr2drcomrc.sh       ./overlay/Drcom4CWNU/wr2drcomrc.sh
	chmod +x                                  ./overlay/Drcom4CWNU/wr2drcomrc.sh
	$(CP) openwrt/scripts/wr2wireless.sh      ./overlay/Drcom4CWNU/wr2wireless.sh
	chmod +x                                  ./overlay/Drcom4CWNU/wr2wireless.sh
	$(CP) drcom                               ./overlay/Drcom4CWNU/drcom
	$(CP) drcomrc.example                     ./overlay/Drcom4CWNU/drcomrc
	$(CP) random_mac                          ./usr/bin/random_mac
	tar -czf data.tar.gz ./usr ./etc ./overlay
	$(CP) openwrt/ipk/control                 ./control
	$(SED) -i "s/Version.*/Version: $(VERSION)/"                                  ./control
	$(SED) -i "s/Installed-Size.*/Installed-Size: `du -b data.tar.gz | cut -f1`/" ./control
	# 欺骗opkg吧
	# 架构直接写成all免去检测，但实际上是按照mips的大小端来分类好了的
	$(SED) -i "s/Architecture.*/Architecture: all/" ./control;
	tar -czf ./control.tar.gz ./control
	$(CP) openwrt/ipk/debian-binary           ./debian-binary
	tar -czf $(APP).ipk ./data.tar.gz ./debian-binary ./control.tar.gz
	#cat $(APP) | gzip -c > $(APP).ipk
	$(RM) ./usr ./etc ./overlay ./data.tar.gz ./debian-binary ./control.tar.gz ./control
	$(RM) $(APP)

random_mac: openwrt/random_mac.c
	$(CC) -o $@ $^ $(CFLAGS)

help:
	@echo "make help|all|release|tar|distclean"
	@echo "     help: Show this page."
	@echo "     all: Build all src."
	@echo "     release: Build all src and tar executable binary program & resource files."
	@echo "     tar: tar src files & resource files."
	@echo "     distclean: clean all exclude original file such as src & 'Makefile'."
	@echo "     install: install soft to current 'dist' folder. NOTE: just for linux!"
	@echo "set VARIABLE"
	@echo "$$ make TARGET=target IS_GUI=gui"
	@echo "     target: LINUX or OPENWRT"
	@echo "     gui: GUI or empty(don't type it. e.g. 'IS_GUI=')"

clean:
	$(RM) *.o netif-config.exe netif-config drcom dist gmon.out random_mac

distclean: clean
	$(RM) cscope.* tags dist
	$(RM) $(APP)* *.ipk

.PHONY: clean all tar distclean release help install ipk