diff --git a/samples/dect/dect_phy/hello_dect/CMakeLists.txt b/samples/dect/dect_phy/hello_dect/CMakeLists.txt
new file mode 100644
index 000000000000..e7b554343b74
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect/CMakeLists.txt
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+cmake_minimum_required(VERSION 3.20.0)
+
+find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
+project(hello_dect)
+
+# NORDIC SDK APP START
+target_sources(app PRIVATE src/main.c)
+# NORDIC SDK APP END
diff --git a/samples/dect/dect_phy/hello_dect/Kconfig b/samples/dect/dect_phy/hello_dect/Kconfig
new file mode 100644
index 000000000000..5942a3f51ea4
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect/Kconfig
@@ -0,0 +1,42 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+config CARRIER
+	int "Carrier to use"
+	default 1677 #during development, remove default from sample so cutomer must address it?-
+	help
+	   The availability of the channels and the exact regulation to use them varies in different countries.
+	   See ETSI TS 103 636-2 5.4.2 for the calculation.
+
+config MCS
+	int
+	default 1
+	help
+	   The MCS impacts how much data can be fit into subslots/slots.
+	   This is now hardcoded assuming MCS 1.
+
+config TX_POWER
+	int "Transmission power"
+	range 0 11
+	default 1
+	help
+	   TX power, 11 == 19 dBm, maximum of the HW(!)
+
+config TX_INTERVAL_SECONDS
+	int "Transmission interval in seconds"
+	default 5
+
+config TX_TRANSMISSION_CYCLES_BEFORE_EXIT
+	int "Number of transmissions lost before receiver device times out"
+	default 3
+
+module = DECT_PHY_HELLO
+module-str = DECT NR+ PHY hello DECT
+source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"
+
+menu "Zephyr Kernel"
+source "Kconfig.zephyr"
+endmenu
diff --git a/samples/dect/dect_phy/hello_dect/README.rst b/samples/dect/dect_phy/hello_dect/README.rst
new file mode 100644
index 000000000000..d3c398b7db7b
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect/README.rst
@@ -0,0 +1,95 @@
+.. _nrf_modem_dect_phy_hello:
+
+nRF91x1: DECT NR+ PHY hello sample
+##################################
+
+.. contents::
+   :local:
+   :depth: 2
+
+This sample demonstrates how to set up a simple DECT NR+ application with the DECT PHY modem firmware.
+
+.. important::
+
+   DECT NR+ operates on free but regulated radio channels. The regulation and availability of the channels varies in different countries.
+   It is the responsibility of the developer to operate the devices according to the local regulation, both at the development site and the device operation regions.
+
+Requirements
+************
+
+The sample needs at least two nRF91x1 Development Kits.
+
+See :ref:`nrf91x1_ug_intro` for more details.
+
+.. note::
+
+   The :ref:`nrf_modem_dect_phy_simple` require a special modem firmware to run on the nRF91x1 modem core. Please contact our sales department to know more.
+
+
+.. include:: /includes/tfm.txt
+
+Overview
+********
+
+The sample shows a simple broadcast of DECT NR+ messages from one device to other devices on a hard-coded channel.
+
+During initialization the devices listens on the channel for broadcast transmissions.
+Dependent on the detection of transmissions, the device takes one of the following roles:
+
+* If no transmission is detected, the device takes the role as a tranceiver. In this role, the device sends an incrementing counter value on the hard-coded channel. The period between each transmission is decided by the :kconfig:option:`CONFIG_TX_INTERVAL_SECONDS` Kconfig option.
+* If a transmission is detected, the device takes the role as a receiver. In this role, the device listens for incomming messages.
+  By comparing the counter value with the previous one, the device detects if messages are lost in transmission.
+
+The device will exit the sample if the user presses button 1, ``exit`` is entered in the terminal or if an irrecoverable error occurs.
+A device in the receiving role will also exit if no message is received within a given number of transmission cycles, see :kconfig:option:`CONFIG_TX_TRANSMISSION_CYCLES_BEFORE_EXIT.
+
+Upon exit, devices in the receiving role will print a simple statistics.
+Each device can be reset to run the sample again.
+
+TX Mode: led 1 on, led 2 blinks
+RX mode: led 1 off, led 2 blinks
+
+User interface
+***************
+
+Button 1:
+   Exits the sample.
+
+
+Building and running
+********************
+
+.. |sample path| replace:: :file:`samples/modem_trace_flash`
+
+.. include:: /includes/build_and_run_ns.txt
+
+Testing
+=======
+
+|test_sample|
+
+After programming the sample to your development kits, test it by performing the following steps:
+
+#. |connect_kit|
+#. |connect_terminal|
+#. Observe that the device will start listening for incomming data. If data is received, the device will take the receiver role, if not the device will take the transmitter role.
+#. Observe that the transmitter device will transmit a counter value that is received by the other devices.
+#. Press button 1 on the transmitter device. Observe that the device stops transmitting, and the other devices stop receiving.
+#. After some time, observe that the receiver devices prints the simple statistics and exit the sample.
+
+
+Dependencies
+************
+
+It uses the following `sdk-nrfxlib`_ libraries:
+
+* :ref:`nrfxlib:nrf_modem`
+
+It uses the following Zephyr libraries:
+
+* :ref:`zephyr:uart_api`
+
+
+In addition, it uses the following secure firmware components:
+
+* :ref:`Trusted Firmware-M <ug_tfm>`
diff --git a/samples/dect/dect_phy/hello_dect/prj.conf b/samples/dect/dect_phy/hello_dect/prj.conf
new file mode 100644
index 000000000000..1bc35301c91d
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect/prj.conf
@@ -0,0 +1,9 @@
+CONFIG_DK_LIBRARY=y
+CONFIG_LOG=y
+
+CONFIG_MODEM_ANTENNA_AT_MAGPIO=""
+CONFIG_MODEM_ANTENNA_AT_COEX0=""
+
+CONFIG_NRF_MODEM_LIB=y
+
+CONFIG_NRF_MODEM_LINK_BINARY_DECT_PHY=y
diff --git a/samples/dect/dect_phy/hello_dect/sample.yaml b/samples/dect/dect_phy/hello_dect/sample.yaml
new file mode 100644
index 000000000000..5c4742faec44
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect/sample.yaml
@@ -0,0 +1,9 @@
+sample:
+  name: Modem trace flash
+tests:
+  sample.nrf9160.modem_trace_flash:
+    build_only: true
+    integration_platforms:
+      - nrf9160dk_nrf9160_ns
+    platform_allow: nrf9160dk_nrf9160_ns
+    tags: ci_build
diff --git a/samples/dect/dect_phy/hello_dect/src/main.c b/samples/dect/dect_phy/hello_dect/src/main.c
new file mode 100644
index 000000000000..265b37de7c9a
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect/src/main.c
@@ -0,0 +1,534 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+#include <string.h>
+#include <zephyr/kernel.h>
+#include <zephyr/shell/shell.h>
+#include <zephyr/logging/log.h>
+#include <dk_buttons_and_leds.h>
+#include <nrf_modem_dect_phy.h>
+#include <modem/nrf_modem_lib.h>
+#include <nrf_modem_at.h>
+
+LOG_MODULE_REGISTER(app);
+
+/* Note that the MCS impacts how much data can be fit into subslots/slots
+ * this is now hardcoded assuming MCS 1.
+ */
+#define CONFIG_MCS  1
+/* This depends on the MCS above */
+#define DATA_LEN_MAX 4
+
+BUILD_ASSERT(CONFIG_CARRIER != 0, "Please set carrier in project configuration");
+
+#define RX_TIMEOUT_SECONDS (CONFIG_TX_TRANSMISSION_CYCLES_BEFORE_EXIT * CONFIG_TX_INTERVAL_SECONDS)
+
+static enum device_role { UNSPECIFIED, RECEIVER, TRANSMITTER } role = UNSPECIFIED;
+static bool exit;
+
+/* Handle values for API calls. Keep TX and RX values separated TODO: WHY?. */
+#define TX_HANDLE_MIN 1
+#define TX_HANDLE_MAX 0x7fff
+#define RX_HANDLE_MIN 0x8000
+#define RX_HANDLE_MAX 0xffff
+
+static uint32_t handle = 1;
+
+static uint32_t rx_counter_previous;
+static uint32_t num_missing_errors;
+static uint32_t num_crc_errors;
+static uint32_t num_msg_received;
+static uint32_t tx_counter_value;
+
+static uint8_t tx_buf[DATA_LEN_MAX];
+
+K_SEM_DEFINE(modem_sem, 0, 1);
+K_SEM_DEFINE(rx_tx_sem, 0, 1);
+
+struct phy_ctrl_field_common
+{
+	uint32_t packet_length           : 4;
+	uint32_t packet_length_type      : 1;
+	uint32_t header_format           : 3;
+	uint32_t short_network_id        : 8;
+	uint32_t transmitter_id_hi : 8;
+	uint32_t transmitter_id_lo : 8;
+	uint32_t df_mcs         : 3;
+	uint32_t reserved       : 1;
+	uint32_t transmit_power : 4;
+	uint32_t pad            : 24;
+};
+
+union nrf_modem_dect_phy_hdr phyHeader;
+
+static void rx_tx_timer_callback(struct k_timer *dummy);
+
+K_TIMER_DEFINE(rx_tx_timer, rx_tx_timer_callback, NULL);
+
+/* Timer is called if:
+ * - The device is in receiver mode and nothing is received within RX_TIMEOUT_SECONDS.
+ * - The device is in transmitter mode to schadule a transmission.
+ *   Transmission interval is decided by CONFIG_TX_INTERVAL_SECONDS.
+ * - The device is initializing (mode unspecified), and no transmission is received within the
+ *   initialization timeout (RX_TIMEOUT_SECONDS).
+ */
+static void rx_tx_timer_callback(struct k_timer *dummy)
+{
+	switch (role) {
+	case RECEIVER:
+		printk("Receive timeout\n");
+		exit = true;
+		break;
+	case TRANSMITTER:
+		break;
+	case UNSPECIFIED:
+		/* Timer will be restarted when device enters receiver or transmitter role. */
+		k_timer_stop(&rx_tx_timer);
+		/* No transmission detected, will take transmitter role. */
+		LOG_INF("Assigning role transmitter");
+		role = TRANSMITTER;
+	default:
+		break;
+	}
+
+	k_sem_give(&rx_tx_sem);
+}
+
+static void button_handler(uint32_t button_state, uint32_t has_changed)
+{
+	exit = true;
+	k_sem_give(&rx_tx_sem);
+}
+
+/* ETSI TS 103 636-2  spec 8.3.3 RSSI is reported every 0.5dbm */
+int32_t calcRSSI(int16_t recrssi){
+	return (int32_t)(-20 + ((recrssi + 1) * 0.5));
+}
+
+/* Callback after init operation. */
+void init(const uint64_t *time, int16_t temp, enum nrf_modem_dect_phy_err err,
+	  const struct nrf_modem_dect_phy_modem_cfg *cfg)
+{
+	if (err) {
+		LOG_ERR("Init failed, err %d", err);
+		exit = true;
+		return;
+	}
+
+	k_sem_give(&modem_sem);
+}
+
+/* Callback after deinit operation. */
+void deinit(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	if (err) {
+		LOG_ERR("Deinit failed, err %d, exit", err);
+		exit = true;
+		return;
+	}
+
+	k_sem_give(&modem_sem);
+}
+
+/* Operation complete notification. */
+void op_complete(const uint64_t *time, int16_t temperature,
+		 enum nrf_modem_dect_phy_err err, uint32_t handle)
+{
+	LOG_DBG("operation_complete_cb Status %d Handle %d", err, handle);
+	k_sem_give(&modem_sem);
+}
+
+/* Callback after receive stop operation. */
+void rx_stop(const uint64_t *time, enum nrf_modem_dect_phy_err err, uint32_t handle)
+{
+	LOG_DBG("operation_stop_cb Status %d Handle %d", err, handle);
+	k_sem_give(&modem_sem);
+}
+
+/* Physical Control Channel reception notification. */
+void pcc(
+	const uint64_t *time,
+	const struct nrf_modem_dect_phy_rx_pcc_status *status,
+	const union nrf_modem_dect_phy_hdr *hdr)
+{
+	LOG_DBG("pcc_cb header_status: %d rssi_2: %d", status->header_status, status->rssi_2);
+}
+
+/* Physical Control Channel CRC error notification. */
+void pcc_crc_err(const uint64_t *time,
+		 const struct nrf_modem_dect_phy_rx_pcc_crc_failure *crc_failure)
+{
+	num_crc_errors++;
+	int16_t resp = calcRSSI(crc_failure->rssi_2);
+	LOG_ERR("PCC CRC error, rssi_2, %d, crc error count: %d", resp, num_crc_errors);
+}
+
+/* Physical Data Channel reception notification. */
+void pdc( const uint64_t *time,
+	  const struct nrf_modem_dect_phy_rx_pdc_status *status,
+	  const void *data, uint32_t len)
+{
+	int rx_counter;
+	int32_t rx_rssi;
+	uint8_t *rx_data;
+
+	k_timer_start(&rx_tx_timer,
+		      K_SECONDS(RX_TIMEOUT_SECONDS),
+		      K_SECONDS(RX_TIMEOUT_SECONDS));
+
+	/* Unpack data */
+	rx_data = (uint8_t *)data;
+	rx_counter = (rx_data[0]<<24) + (rx_data[1]<<16) + (rx_data[2]<<8) + (rx_data[3]);
+
+	num_msg_received++;
+
+	if (rx_counter % 2 == 0) {
+		dk_set_led_on(DK_LED2);
+	} else {
+		dk_set_led_off(DK_LED2);
+	}
+
+	if (rx_counter_previous > rx_counter) {
+		/* Counter is reset as it reached the maximum. */
+		num_missing_errors = num_missing_errors + rx_counter;
+	} else if (rx_counter_previous > 0 && rx_counter != rx_counter_previous + 1){
+		num_missing_errors = num_missing_errors + (rx_counter - rx_counter_previous) - 1;
+	}
+
+	rx_counter_previous = rx_counter;
+
+	rx_rssi = calcRSSI(status->rssi_2);
+	LOG_INF("Received data, counter: %d, rssi_2: %d, missed/crc errors: %d",
+		rx_counter, rx_rssi, num_missing_errors);
+
+	if (role == UNSPECIFIED) {
+		/* Transmission detected, will take receiver role. */
+		role = RECEIVER;
+	}
+
+	k_sem_give(&rx_tx_sem);
+}
+
+/* Physical Data Channel CRC error notification. */
+void pdc_crc_err(
+	const uint64_t *time, const struct nrf_modem_dect_phy_rx_pdc_crc_failure *crc_failure)
+{
+	num_crc_errors++;
+	int16_t resp=calcRSSI(crc_failure->rssi_2);
+	LOG_ERR("PDC CRC error, rssi_2: %d, CRC error count: %d", resp, num_crc_errors);
+}
+
+/* RSSI measurement result notification. */
+void rssi(const uint64_t *time, const struct nrf_modem_dect_phy_rssi_meas *status)
+{
+	LOG_DBG("RSSI measurement for carrier %d", status->carrier);
+	k_sem_give(&modem_sem);
+}
+
+/* callback after link configuration operation. */
+void link_config(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	return;
+}
+
+/* Callback after time queuery operation. */
+void time_get(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	LOG_DBG("time_query_cb time %"PRIu64" Status %d", *time, err);
+}
+
+/* Callback after capability get operation. */
+void capability_get(const uint64_t *time, enum nrf_modem_dect_phy_err err,
+		    const struct nrf_modem_dect_phy_capability *capability)
+{
+	LOG_DBG("capability_get time %"PRIu64" Status %d", *time, err);
+}
+
+/* Dect PHY callbacks. */
+struct nrf_modem_dect_phy_callbacks dect_phy_callbacks = {
+	.init = init,
+	.deinit = deinit,
+	.op_complete = op_complete,
+	.rx_stop = rx_stop,
+	.pcc = pcc,
+	.pcc_crc_err = pcc_crc_err,
+	.pdc = pdc,
+	.pdc_crc_err = pdc_crc_err,
+	.rssi = rssi,
+	.link_config = link_config,
+	.time_get = time_get,
+	.capability_get = capability_get,
+};
+
+/* Dect PHY init parameters. */
+struct nrf_modem_dect_phy_init_params dect_phy_init_params = {
+	.harq_rx_expiry_time_us = 5000000,
+	.harq_rx_process_count = 4,
+};
+
+/* Receive operation, listen for listen_time_ms duration */
+int modem_rx(uint32_t rxMode, int listen_time_ms, uint32_t handle)
+{
+	int err;
+	struct nrf_modem_dect_phy_rx_params rxOpsParams = {
+		.start_time = 0,
+		.handle = handle,
+		.network_id=0,
+		.mode = rxMode,
+		.rssi_interval = NRF_MODEM_DECT_PHY_RSSI_INTERVAL_OFF,
+		.link_id = NRF_MODEM_DECT_PHY_LINK_UNSPECIFIED,
+		.rssi_level = -60,
+		.carrier = CONFIG_CARRIER,
+		.duration = listen_time_ms * NRF_MODEM_DECT_MODEM_TIME_TICK_RATE_KHZ,
+		.filter.short_network_id = (uint8_t)(0x0a),
+		.filter.is_short_network_id_used = 1,
+		/* listen for everything (broadcast mode used) */
+		.filter.receiver_identity = 0,
+	};
+
+	err = k_sem_take(&modem_sem, K_SECONDS(RX_TIMEOUT_SECONDS));
+	if (err) {
+		LOG_ERR("Failed to take modem sem, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_rx(&rxOpsParams);
+	if (err) {
+		LOG_ERR("Receive failure, err %d", err);
+		return err;
+	}
+
+	return 0;
+}
+
+/* Send operation, start immediately. */
+int modem_tx(uint32_t handle, void *data, size_t data_len)
+{
+	int err;
+	struct nrf_modem_dect_phy_tx_params txOpsParams = { 0 };
+
+	struct phy_ctrl_field_common header = {
+		.header_format = (uint8_t)0x0,
+		.packet_length_type =  (uint8_t)0x0,
+		.packet_length = (uint8_t) 0x01,
+		.short_network_id = (uint8_t)(0x0a & 0xff),
+
+		.transmitter_id_hi = (uint8_t) (0x0101 >> 8),
+		.transmitter_id_lo = (uint8_t) (0x0101 & 0xff),
+		.transmit_power = CONFIG_TX_POWER,
+		.reserved = 0,
+		.df_mcs = CONFIG_MCS
+	};
+
+	memcpy(&phyHeader.type_1, &header, 5);
+
+/*
+	phyHeader.hdr_type_1.header_format = (uint8_t)0x0; //broadcast
+	phyHeader.hdr_type_1.packet_length_type =  (uint8_t)0x0;
+	phyHeader.hdr_type_1.packet_length = (uint8_t) 0x01;
+	phyHeader.hdr_type_1.short_network_id = (uint8_t)(0x0a & 0xff);
+
+	phyHeader.hdr_type_1.transmitter_id_hi = (uint8_t) (0x0101 >> 8);
+	phyHeader.hdr_type_1.transmitter_id_lo = (uint8_t) (0x0101 & 0xff);
+	phyHeader.hdr_type_1.transmit_power = CONFIG_TX_POWER;
+	phyHeader.hdr_type_1.reserved = 0;
+	phyHeader.hdr_type_1.df_mcs = CONFIG_MCS;
+*/
+	txOpsParams.start_time = 0;
+	txOpsParams.handle = handle;
+	txOpsParams.network_id = 0x0a;
+	txOpsParams.phy_type = 0;
+	txOpsParams.lbt_rssi_threshold_max = 0;
+	txOpsParams.carrier = CONFIG_CARRIER;
+	txOpsParams.lbt_period = NRF_MODEM_DECT_LBT_PERIOD_MAX;
+	txOpsParams.phy_header = &phyHeader;
+	txOpsParams.data = data;
+	txOpsParams.data_size = data_len;
+
+	k_sem_take(&modem_sem, K_FOREVER);
+
+	err = nrf_modem_dect_phy_tx(&txOpsParams);
+	if (err!=0) {
+		return err;
+	}
+
+	return 0;
+}
+
+/* Transmit counter value on the air. */
+static int transmit_counter(uint32_t handle, uint32_t counter)
+{
+	int err;
+
+	if(counter % 2==0) {
+		dk_set_led_on(DK_LED2);
+	}
+	else {
+		dk_set_led_off(DK_LED2);
+	}
+
+	/* Format TX buffer */
+	for (int i = 0; i < DATA_LEN_MAX; i++) {
+		tx_buf[(DATA_LEN_MAX - 1) - i] = (counter >> (i * 8)) & 0xff;
+	}
+
+	err = modem_tx(handle, tx_buf, sizeof(tx_buf));
+	if (err) {
+		LOG_ERR("Modem TX failed, err %d", err);
+		return err;
+	}
+
+	return 0;
+}
+
+
+static int shell_exit(const struct shell *shell, size_t argc, char **argv)
+{
+	ARG_UNUSED(argc);
+	ARG_UNUSED(argv);
+
+	LOG_INF("Exit request received");
+	exit = true;
+	k_sem_give(&rx_tx_sem);
+
+	return 0;
+}
+
+SHELL_CMD_REGISTER(exit, NULL, "Exit sample", shell_exit);
+
+
+int main(void)
+{
+	int err;
+
+	LOG_INF("Dect NR+ PHY sample started");
+
+	err = dk_buttons_init(button_handler);
+	if (err) {
+		LOG_ERR("dk_buttons_init failed, err %d", err);
+	}
+
+	err = dk_leds_init();
+	if (err) {
+		LOG_ERR("dk_leds_init failed, err %d", err);
+	}
+
+	err = nrf_modem_lib_init();
+	if (err) {
+		LOG_ERR("modem init failed, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_callback_set(&dect_phy_callbacks);
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_callback_set failed, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_init(&dect_phy_init_params);
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_init failed, err %d", err);
+		return err;
+	}
+
+	LOG_INF("Dect NR+ PHY initialized %d", err);
+
+	/* Wait for initial listen to decide what role to take. */
+	LOG_INF("Listening for transmissions on channel %d for %d secs",
+		CONFIG_CARRIER, RX_TIMEOUT_SECONDS);
+	err = modem_rx(NRF_MODEM_DECT_PHY_RX_MODE_SINGLE_SHOT,
+		       RX_TIMEOUT_SECONDS * MSEC_PER_SEC, 0);
+	if (err) {
+		LOG_ERR("Modem RX failed during initialization, err %d", err);
+		return err;
+	}
+
+	k_timer_start(&rx_tx_timer, K_SECONDS(RX_TIMEOUT_SECONDS), K_SECONDS(RX_TIMEOUT_SECONDS));
+
+	k_sem_take(&rx_tx_sem, K_FOREVER);
+	k_sem_give(&rx_tx_sem);
+
+	LOG_INF("Press button 1 or enter 'exit' to exit the sample");
+
+	if (role == TRANSMITTER) {
+		LOG_INF("Taking transmitter role");
+		dk_set_led_on(DK_LED1);
+
+		k_timer_start(&rx_tx_timer, K_NO_WAIT, K_SECONDS(CONFIG_TX_INTERVAL_SECONDS));
+
+		while (1) {
+			handle++;
+
+			if(handle == UINT32_MAX) {
+				handle = TX_HANDLE_MIN;
+			}
+
+			k_sem_take(&rx_tx_sem, K_FOREVER);
+			if (exit) {
+				break;
+			}
+
+			err = transmit_counter(handle, tx_counter_value);
+			if (err) {
+				LOG_ERR("transmit failed, err %d", err);
+				continue;
+			}
+
+			LOG_INF("Data sent, counter %d",tx_counter_value);
+
+			tx_counter_value++;
+
+			if (tx_counter_value == UINT32_MAX) {
+				tx_counter_value = 0;
+				LOG_WRN("TX integer value looped");
+			}
+		}
+
+		k_timer_stop(&rx_tx_timer);
+
+		LOG_INF("Exit on user input");
+		LOG_INF("*********************************************");
+		LOG_INF("Sent messages %d", tx_counter_value - 1);
+		LOG_INF("**************** exit *************************");
+	} else if (role == RECEIVER) {
+		LOG_INF("Taking receiver role");
+		dk_set_led_off(DK_LED1);
+
+		k_timer_start(&rx_tx_timer,
+			      K_SECONDS(RX_TIMEOUT_SECONDS),
+			      K_SECONDS(RX_TIMEOUT_SECONDS));
+
+		while (1) {
+			handle++;
+
+			if (handle == RX_HANDLE_MAX) {
+				handle= RX_HANDLE_MIN;
+			}
+
+			k_sem_take(&rx_tx_sem, K_FOREVER);
+			if (exit) {
+				break;
+			}
+
+			err = modem_rx(NRF_MODEM_DECT_PHY_RX_MODE_SINGLE_SHOT,
+				       RX_TIMEOUT_SECONDS * MSEC_PER_SEC, handle);
+			if (err) {
+				LOG_ERR("Modem RX failed, err %d", err);
+			}
+		}
+
+		k_timer_stop(&rx_tx_timer);
+
+		LOG_INF("Exit on timeout or user input");
+		LOG_INF("*********************************************");
+		LOG_INF("Received messages %d", num_msg_received);
+		/* CRC error causes a missed message, so missing errors includes also CRC */
+		LOG_INF("Missed messages %d", (num_missing_errors - num_crc_errors));
+		LOG_INF("CRC errors  %d", num_crc_errors);
+		LOG_INF("**************** exit *************************");
+	}
+
+	return 0;
+}
diff --git a/samples/dect/dect_phy/hello_dect/west.yml b/samples/dect/dect_phy/hello_dect/west.yml
new file mode 100644
index 000000000000..725725c119fe
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect/west.yml
@@ -0,0 +1,48 @@
+# The west manifest file for the Nordic Modem Library.
+#
+# The per-installation west configuration file specifies the location of this
+# manifest file. The "path" option in the [manifest] section of .west/config
+# defines the folder that contains west.yml. The path is relative to the folder
+# that contains .west. See the west documentation for more information.
+
+manifest:
+  defaults:
+    remote: ncs
+
+  remotes:
+    - name: ncs
+      url-base: https://github.com/nrfconnect
+    - name: nordicsemi
+      url-base: https://github.com/NordicSemiconductor
+    - name: nordicplayground
+      url-base: https://github.com/NordicPlayground
+    - name: eivindj-nordic
+      url-base: https://github.com/lemrey
+
+  group-filter:
+    - -default
+    - -test
+
+  # Use the `ncs` remote when updating the manifest to tag a release.
+  # Otherwise, if submitting a PR to libmodem which needs changes `sdk-nrf` or `nrfxlib`,
+  # submit a PR to the integration branches in `nrfxlib` and `sdk-nrf` (lemrey/libmodem)
+  # and point the manifest to those PR (pull/xxx/head).
+  # This is necessary for CI to run correctly on the PR to libmodem.
+  # Finally, when the PRs to the integration branches are merged,
+  # update the manifest in your libmodem PR to point to the integration
+  # branches instead, i.e. lemrey/libmodem.
+
+  projects:
+    - name: libmodem
+      path: libmodem
+      remote: nordicplayground
+      revision: main
+      import: true
+
+    - name: nrf-dect
+      path: nrf-dect
+      remote: nordicsemi
+      revision: pull/4/head
+
+  self:
+    path: eivindj-nordic/dect-testapp
diff --git a/samples/dect/dect_phy/hello_dect_rx/CMakeLists.txt b/samples/dect/dect_phy/hello_dect_rx/CMakeLists.txt
new file mode 100644
index 000000000000..e7b554343b74
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rx/CMakeLists.txt
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+cmake_minimum_required(VERSION 3.20.0)
+
+find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
+project(hello_dect)
+
+# NORDIC SDK APP START
+target_sources(app PRIVATE src/main.c)
+# NORDIC SDK APP END
diff --git a/samples/dect/dect_phy/hello_dect_rx/Kconfig b/samples/dect/dect_phy/hello_dect_rx/Kconfig
new file mode 100644
index 000000000000..430208ceba88
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rx/Kconfig
@@ -0,0 +1,32 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+config CARRIER
+	int "Carrier to use"
+	default 1677 #during development, remove default from sample so cutomer must address it?-
+	help
+	   The availability of the channels and the exact regulation to use them varies in different countries.
+	   See ETSI TS 103 636-2 5.4.2 for the calculation.
+
+config NETWORK_ID
+	int "Network ID"
+	range 1 4294967295
+	default 91
+
+config RX_TIMEOUT_S
+	int "RX timeout"
+	default 30
+	help
+	   Time to wait before sample exits after last successful reception.
+	   Time is given in seconds.
+
+module = DECT_PHY_HELLO_RX
+module-str = DECT NR+ PHY hello DECT
+source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"
+
+menu "Zephyr Kernel"
+source "Kconfig.zephyr"
+endmenu
diff --git a/samples/dect/dect_phy/hello_dect_rx/README.rst b/samples/dect/dect_phy/hello_dect_rx/README.rst
new file mode 100644
index 000000000000..d3c398b7db7b
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rx/README.rst
@@ -0,0 +1,95 @@
+.. _nrf_modem_dect_phy_hello:
+
+nRF91x1: DECT NR+ PHY hello sample
+##################################
+
+.. contents::
+   :local:
+   :depth: 2
+
+This sample demonstrates how to set up a simple DECT NR+ application with the DECT PHY modem firmware.
+
+.. important::
+
+   DECT NR+ operates on free but regulated radio channels. The regulation and availability of the channels varies in different countries.
+   It is the responsibility of the developer to operate the devices according to the local regulation, both at the development site and the device operation regions.
+
+Requirements
+************
+
+The sample needs at least two nRF91x1 Development Kits.
+
+See :ref:`nrf91x1_ug_intro` for more details.
+
+.. note::
+
+   The :ref:`nrf_modem_dect_phy_simple` require a special modem firmware to run on the nRF91x1 modem core. Please contact our sales department to know more.
+
+
+.. include:: /includes/tfm.txt
+
+Overview
+********
+
+The sample shows a simple broadcast of DECT NR+ messages from one device to other devices on a hard-coded channel.
+
+During initialization the devices listens on the channel for broadcast transmissions.
+Dependent on the detection of transmissions, the device takes one of the following roles:
+
+* If no transmission is detected, the device takes the role as a tranceiver. In this role, the device sends an incrementing counter value on the hard-coded channel. The period between each transmission is decided by the :kconfig:option:`CONFIG_TX_INTERVAL_SECONDS` Kconfig option.
+* If a transmission is detected, the device takes the role as a receiver. In this role, the device listens for incomming messages.
+  By comparing the counter value with the previous one, the device detects if messages are lost in transmission.
+
+The device will exit the sample if the user presses button 1, ``exit`` is entered in the terminal or if an irrecoverable error occurs.
+A device in the receiving role will also exit if no message is received within a given number of transmission cycles, see :kconfig:option:`CONFIG_TX_TRANSMISSION_CYCLES_BEFORE_EXIT.
+
+Upon exit, devices in the receiving role will print a simple statistics.
+Each device can be reset to run the sample again.
+
+TX Mode: led 1 on, led 2 blinks
+RX mode: led 1 off, led 2 blinks
+
+User interface
+***************
+
+Button 1:
+   Exits the sample.
+
+
+Building and running
+********************
+
+.. |sample path| replace:: :file:`samples/modem_trace_flash`
+
+.. include:: /includes/build_and_run_ns.txt
+
+Testing
+=======
+
+|test_sample|
+
+After programming the sample to your development kits, test it by performing the following steps:
+
+#. |connect_kit|
+#. |connect_terminal|
+#. Observe that the device will start listening for incomming data. If data is received, the device will take the receiver role, if not the device will take the transmitter role.
+#. Observe that the transmitter device will transmit a counter value that is received by the other devices.
+#. Press button 1 on the transmitter device. Observe that the device stops transmitting, and the other devices stop receiving.
+#. After some time, observe that the receiver devices prints the simple statistics and exit the sample.
+
+
+Dependencies
+************
+
+It uses the following `sdk-nrfxlib`_ libraries:
+
+* :ref:`nrfxlib:nrf_modem`
+
+It uses the following Zephyr libraries:
+
+* :ref:`zephyr:uart_api`
+
+
+In addition, it uses the following secure firmware components:
+
+* :ref:`Trusted Firmware-M <ug_tfm>`
diff --git a/samples/dect/dect_phy/hello_dect_rx/prj.conf b/samples/dect/dect_phy/hello_dect_rx/prj.conf
new file mode 100644
index 000000000000..8ca959f05cf8
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rx/prj.conf
@@ -0,0 +1,8 @@
+CONFIG_LOG=y
+CONFIG_DECT_PHY_HELLO_RX_LOG_LEVEL_INF=y
+
+CONFIG_MODEM_ANTENNA_AT_MAGPIO=""
+CONFIG_MODEM_ANTENNA_AT_COEX0=""
+
+CONFIG_NRF_MODEM_LIB=y
+CONFIG_NRF_MODEM_LINK_BINARY_DECT_PHY=y
diff --git a/samples/dect/dect_phy/hello_dect_rx/sample.yaml b/samples/dect/dect_phy/hello_dect_rx/sample.yaml
new file mode 100644
index 000000000000..5c4742faec44
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rx/sample.yaml
@@ -0,0 +1,9 @@
+sample:
+  name: Modem trace flash
+tests:
+  sample.nrf9160.modem_trace_flash:
+    build_only: true
+    integration_platforms:
+      - nrf9160dk_nrf9160_ns
+    platform_allow: nrf9160dk_nrf9160_ns
+    tags: ci_build
diff --git a/samples/dect/dect_phy/hello_dect_rx/src/main.c b/samples/dect/dect_phy/hello_dect_rx/src/main.c
new file mode 100644
index 000000000000..5a515626be46
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rx/src/main.c
@@ -0,0 +1,262 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+#include <string.h>
+#include <zephyr/kernel.h>
+#include <zephyr/logging/log.h>
+#include <nrf_modem_dect_phy.h>
+#include <modem/nrf_modem_lib.h>
+
+LOG_MODULE_REGISTER(app_rx, CONFIG_DECT_PHY_HELLO_RX_LOG_LEVEL);
+
+BUILD_ASSERT(CONFIG_CARRIER != 0, "Please set carrier in project configuration");
+
+/* Handle values for API calls */
+#define RX_HANDLE_MIN 0x7fff
+#define RX_HANDLE_MAX 0xffff
+
+static uint32_t handle = 1;
+
+static bool exit;
+
+K_SEM_DEFINE(modem_sem, 0, 1);
+K_SEM_DEFINE(rx_sem, 0, 1);
+
+/* ETSI TS 103 636-2  spec 8.3.3 RSSI is reported every 0.5dbm */
+int32_t calcRSSI(int16_t recrssi){
+	return (int32_t)(-20 + ((recrssi + 1) * 0.5));
+}
+
+/* Callback after init operation. */
+void init(const uint64_t *time, int16_t temp, enum nrf_modem_dect_phy_err err,
+	  const struct nrf_modem_dect_phy_modem_cfg *cfg)
+{
+	if (err) {
+		LOG_ERR("Init failed, err %d", err);
+		exit = true;
+		return;
+	}
+
+	k_sem_give(&modem_sem);
+}
+
+/* Callback after deinit operation. */
+void deinit(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	if (err) {
+		LOG_ERR("Deinit failed, err %d", err);
+		return;
+	}
+
+	k_sem_give(&modem_sem);
+}
+
+/* Operation complete notification. */
+void op_complete(const uint64_t *time, int16_t temperature,
+		 enum nrf_modem_dect_phy_err err, uint32_t handle)
+{
+	LOG_DBG("operation_complete_cb Status %d Handle %d", err, handle);
+	k_sem_give(&modem_sem);
+}
+
+/* Callback after receive stop operation. */
+void rx_stop(const uint64_t *time, enum nrf_modem_dect_phy_err err, uint32_t handle)
+{
+	LOG_DBG("operation_stop_cb Status %d Handle %d", err, handle);
+	k_sem_give(&modem_sem);
+}
+
+/* Physical Control Channel reception notification. */
+void pcc(
+	const uint64_t *time,
+	const struct nrf_modem_dect_phy_rx_pcc_status *status,
+	const union nrf_modem_dect_phy_hdr *hdr)
+{
+	LOG_DBG("pcc_cb header_status: %d rssi_2: %d",	status->header_status, status->rssi_2);
+
+}
+
+/* Physical Control Channel CRC error notification. */
+void pcc_crc_err(const uint64_t *time,
+		 const struct nrf_modem_dect_phy_rx_pcc_crc_failure *crc_failure)
+{
+	int16_t resp = calcRSSI(crc_failure->rssi_2);
+	LOG_ERR("PCC CRC error, rssi_2, %d", resp);
+}
+
+/* Physical Data Channel reception notification. */
+void pdc( const uint64_t *time,
+	  const struct nrf_modem_dect_phy_rx_pdc_status *status,
+	  const void *data, uint32_t len)
+{
+	int32_t rx_rssi;
+
+	rx_rssi = calcRSSI(status->rssi_2);
+
+	LOG_INF("Received data (RSSI: %d): %s", rx_rssi, (char *)data);
+
+	k_sem_give(&rx_sem);
+}
+
+/* Physical Data Channel CRC error notification. */
+void pdc_crc_err(
+	const uint64_t *time, const struct nrf_modem_dect_phy_rx_pdc_crc_failure *crc_failure)
+{
+	int16_t resp=calcRSSI(crc_failure->rssi_2);
+	LOG_ERR("PDC CRC error, rssi_2: %d", resp);
+}
+
+/* RSSI measurement result notification. */
+void rssi(const uint64_t *time, const struct nrf_modem_dect_phy_rssi_meas *status)
+{
+	return;
+}
+
+/* callback after link configuration operation. */
+void link_config(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	return;
+}
+
+/* Callback after time queuery operation. */
+void time_get(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	LOG_DBG("time_query_cb time %"PRIu64" Status %d", *time, err);
+}
+
+/* Callback after capability get operation. */
+void capability_get(const uint64_t *time, enum nrf_modem_dect_phy_err err,
+		    const struct nrf_modem_dect_phy_capability *capability)
+{
+	LOG_DBG("capability_get time %"PRIu64" Status %d", *time, err);
+}
+
+/* Dect PHY callbacks. */
+struct nrf_modem_dect_phy_callbacks dect_phy_callbacks = {
+	.init = init,
+	.deinit = deinit,
+	.op_complete = op_complete,
+	.rx_stop = rx_stop,
+	.pcc = pcc,
+	.pcc_crc_err = pcc_crc_err,
+	.pdc = pdc,
+	.pdc_crc_err = pdc_crc_err,
+	.rssi = rssi,
+	.link_config = link_config,
+	.time_get = time_get,
+	.capability_get = capability_get,
+};
+
+/* Dect PHY init parameters. */
+struct nrf_modem_dect_phy_init_params dect_phy_init_params = {
+	.harq_rx_expiry_time_us = 5000000,
+	.harq_rx_process_count = 4,
+};
+
+/* Receive operation, listen for listen_time_ms duration */
+int modem_rx(uint32_t rxMode, int listen_time_ms, uint32_t handle)
+{
+	int err;
+	struct nrf_modem_dect_phy_rx_params rxOpsParams = {
+		.start_time = 0,
+		.handle = handle,
+		.network_id = CONFIG_NETWORK_ID,
+		.mode = rxMode,
+		.rssi_interval = NRF_MODEM_DECT_PHY_RSSI_INTERVAL_OFF,
+		.link_id = NRF_MODEM_DECT_PHY_LINK_UNSPECIFIED,
+		.rssi_level = -60,
+		.carrier = CONFIG_CARRIER,
+		.duration = listen_time_ms * NRF_MODEM_DECT_MODEM_TIME_TICK_RATE_KHZ,
+		.filter.short_network_id = CONFIG_NETWORK_ID & 0xff,
+		.filter.is_short_network_id_used = 1,
+		/* listen for everything (broadcast mode used) */
+		.filter.receiver_identity = 0,
+	};
+
+	err = k_sem_take(&modem_sem, K_SECONDS(CONFIG_RX_TIMEOUT_S));
+	if (err) {
+		LOG_ERR("Failed to take modem sem, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_rx(&rxOpsParams);
+	if (err) {
+		LOG_ERR("Receive failure, err %d", err);
+		return err;
+	}
+
+	return 0;
+}
+
+int main(void)
+{
+	int err;
+
+	LOG_INF("Dect NR+ PHY sample started");
+
+	err = nrf_modem_lib_init();
+	if (err) {
+		LOG_ERR("modem init failed, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_callback_set(&dect_phy_callbacks);
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_callback_set failed, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_init(&dect_phy_init_params);
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_init failed, err %d", err);
+		return err;
+	}
+
+	k_sem_take(&modem_sem, K_FOREVER);
+	k_sem_give(&modem_sem);
+	if (exit) {
+		return -EIO;
+	}
+
+	LOG_INF("Dect NR+ PHY initialized %d", err);
+	LOG_INF("Starting to receive");
+
+	while (1) {
+		handle++;
+		if (handle == RX_HANDLE_MAX) {
+			handle= RX_HANDLE_MIN;
+		}
+
+		err = modem_rx(NRF_MODEM_DECT_PHY_RX_MODE_SINGLE_SHOT,
+				CONFIG_RX_TIMEOUT_S * MSEC_PER_SEC, handle);
+		if (err) {
+			LOG_ERR("Modem RX failed, err %d", err);
+		}
+
+		err = k_sem_take(&rx_sem, K_SECONDS(CONFIG_RX_TIMEOUT_S));
+		if (err) {
+			LOG_INF("Receive timeout");
+			break;
+		}
+	}
+
+	LOG_INF("Shutting down");
+
+	err = nrf_modem_dect_phy_deinit();
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_deinit() failed, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_lib_shutdown();
+	if (err) {
+		LOG_ERR("nrf_modem_lib_shutdown() failed, err %d", err);
+		return err;
+	}
+
+	LOG_INF("Bye!");
+
+	return 0;
+}
diff --git a/samples/dect/dect_phy/hello_dect_rx/west.yml b/samples/dect/dect_phy/hello_dect_rx/west.yml
new file mode 100644
index 000000000000..725725c119fe
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rx/west.yml
@@ -0,0 +1,48 @@
+# The west manifest file for the Nordic Modem Library.
+#
+# The per-installation west configuration file specifies the location of this
+# manifest file. The "path" option in the [manifest] section of .west/config
+# defines the folder that contains west.yml. The path is relative to the folder
+# that contains .west. See the west documentation for more information.
+
+manifest:
+  defaults:
+    remote: ncs
+
+  remotes:
+    - name: ncs
+      url-base: https://github.com/nrfconnect
+    - name: nordicsemi
+      url-base: https://github.com/NordicSemiconductor
+    - name: nordicplayground
+      url-base: https://github.com/NordicPlayground
+    - name: eivindj-nordic
+      url-base: https://github.com/lemrey
+
+  group-filter:
+    - -default
+    - -test
+
+  # Use the `ncs` remote when updating the manifest to tag a release.
+  # Otherwise, if submitting a PR to libmodem which needs changes `sdk-nrf` or `nrfxlib`,
+  # submit a PR to the integration branches in `nrfxlib` and `sdk-nrf` (lemrey/libmodem)
+  # and point the manifest to those PR (pull/xxx/head).
+  # This is necessary for CI to run correctly on the PR to libmodem.
+  # Finally, when the PRs to the integration branches are merged,
+  # update the manifest in your libmodem PR to point to the integration
+  # branches instead, i.e. lemrey/libmodem.
+
+  projects:
+    - name: libmodem
+      path: libmodem
+      remote: nordicplayground
+      revision: main
+      import: true
+
+    - name: nrf-dect
+      path: nrf-dect
+      remote: nordicsemi
+      revision: pull/4/head
+
+  self:
+    path: eivindj-nordic/dect-testapp
diff --git a/samples/dect/dect_phy/hello_dect_rxtx/CMakeLists.txt b/samples/dect/dect_phy/hello_dect_rxtx/CMakeLists.txt
new file mode 100644
index 000000000000..e7b554343b74
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rxtx/CMakeLists.txt
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+cmake_minimum_required(VERSION 3.20.0)
+
+find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
+project(hello_dect)
+
+# NORDIC SDK APP START
+target_sources(app PRIVATE src/main.c)
+# NORDIC SDK APP END
diff --git a/samples/dect/dect_phy/hello_dect_rxtx/Kconfig b/samples/dect/dect_phy/hello_dect_rxtx/Kconfig
new file mode 100644
index 000000000000..6e812141aa90
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rxtx/Kconfig
@@ -0,0 +1,56 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+config CARRIER
+	int "Carrier to use"
+	default 1677 #during development, remove default from sample so cutomer must address it?-
+	help
+	   The availability of the channels and the exact regulation to use them varies in different countries.
+	   See ETSI TS 103 636-2 5.4.2 for the calculation.
+
+config NETWORK_ID
+	int "Network ID"
+	range 1 4294967295
+	default 91
+
+config MCS
+	int "MCS"
+	default 1
+	help
+	   The MCS impacts how much data can be fit into subslots/slots.
+
+config TX_POWER
+	int "Transmission power"
+	range 0 11
+	default 11
+	help
+	   TX power, 11 == 19 dBm, maximum of the HW(!)
+
+config TX_INTERVAL_SECONDS
+	int "Transmission interval in seconds"
+	default 5
+
+config TX_TRANSMISSIONS
+	int "TX transmissions"
+	range 0 4294967295
+	default 0
+	help
+	   Transmissions before sample exits, use 0 to transmit forever.
+
+config RX_TIMEOUT_S
+	int "RX timeout"
+	default 5
+	help
+	   Time to wait before sample exits after last successful reception.
+	   Time is given in seconds.
+
+module = DECT_PHY_HELLO_TX
+module-str = DECT NR+ PHY hello DECT
+source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"
+
+menu "Zephyr Kernel"
+source "Kconfig.zephyr"
+endmenu
diff --git a/samples/dect/dect_phy/hello_dect_rxtx/README.rst b/samples/dect/dect_phy/hello_dect_rxtx/README.rst
new file mode 100644
index 000000000000..d3c398b7db7b
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rxtx/README.rst
@@ -0,0 +1,95 @@
+.. _nrf_modem_dect_phy_hello:
+
+nRF91x1: DECT NR+ PHY hello sample
+##################################
+
+.. contents::
+   :local:
+   :depth: 2
+
+This sample demonstrates how to set up a simple DECT NR+ application with the DECT PHY modem firmware.
+
+.. important::
+
+   DECT NR+ operates on free but regulated radio channels. The regulation and availability of the channels varies in different countries.
+   It is the responsibility of the developer to operate the devices according to the local regulation, both at the development site and the device operation regions.
+
+Requirements
+************
+
+The sample needs at least two nRF91x1 Development Kits.
+
+See :ref:`nrf91x1_ug_intro` for more details.
+
+.. note::
+
+   The :ref:`nrf_modem_dect_phy_simple` require a special modem firmware to run on the nRF91x1 modem core. Please contact our sales department to know more.
+
+
+.. include:: /includes/tfm.txt
+
+Overview
+********
+
+The sample shows a simple broadcast of DECT NR+ messages from one device to other devices on a hard-coded channel.
+
+During initialization the devices listens on the channel for broadcast transmissions.
+Dependent on the detection of transmissions, the device takes one of the following roles:
+
+* If no transmission is detected, the device takes the role as a tranceiver. In this role, the device sends an incrementing counter value on the hard-coded channel. The period between each transmission is decided by the :kconfig:option:`CONFIG_TX_INTERVAL_SECONDS` Kconfig option.
+* If a transmission is detected, the device takes the role as a receiver. In this role, the device listens for incomming messages.
+  By comparing the counter value with the previous one, the device detects if messages are lost in transmission.
+
+The device will exit the sample if the user presses button 1, ``exit`` is entered in the terminal or if an irrecoverable error occurs.
+A device in the receiving role will also exit if no message is received within a given number of transmission cycles, see :kconfig:option:`CONFIG_TX_TRANSMISSION_CYCLES_BEFORE_EXIT.
+
+Upon exit, devices in the receiving role will print a simple statistics.
+Each device can be reset to run the sample again.
+
+TX Mode: led 1 on, led 2 blinks
+RX mode: led 1 off, led 2 blinks
+
+User interface
+***************
+
+Button 1:
+   Exits the sample.
+
+
+Building and running
+********************
+
+.. |sample path| replace:: :file:`samples/modem_trace_flash`
+
+.. include:: /includes/build_and_run_ns.txt
+
+Testing
+=======
+
+|test_sample|
+
+After programming the sample to your development kits, test it by performing the following steps:
+
+#. |connect_kit|
+#. |connect_terminal|
+#. Observe that the device will start listening for incomming data. If data is received, the device will take the receiver role, if not the device will take the transmitter role.
+#. Observe that the transmitter device will transmit a counter value that is received by the other devices.
+#. Press button 1 on the transmitter device. Observe that the device stops transmitting, and the other devices stop receiving.
+#. After some time, observe that the receiver devices prints the simple statistics and exit the sample.
+
+
+Dependencies
+************
+
+It uses the following `sdk-nrfxlib`_ libraries:
+
+* :ref:`nrfxlib:nrf_modem`
+
+It uses the following Zephyr libraries:
+
+* :ref:`zephyr:uart_api`
+
+
+In addition, it uses the following secure firmware components:
+
+* :ref:`Trusted Firmware-M <ug_tfm>`
diff --git a/samples/dect/dect_phy/hello_dect_rxtx/prj.conf b/samples/dect/dect_phy/hello_dect_rxtx/prj.conf
new file mode 100644
index 000000000000..15aa49536e0b
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rxtx/prj.conf
@@ -0,0 +1,10 @@
+CONFIG_DK_LIBRARY=y
+CONFIG_LOG=y
+
+CONFIG_MODEM_ANTENNA_AT_MAGPIO=""
+CONFIG_MODEM_ANTENNA_AT_COEX0=""
+
+CONFIG_NRF_MODEM_LIB=y
+
+CONFIG_NRF_MODEM_LINK_BINARY_DECT_PHY=y
+CONFIG_HWINFO=y
diff --git a/samples/dect/dect_phy/hello_dect_rxtx/sample.yaml b/samples/dect/dect_phy/hello_dect_rxtx/sample.yaml
new file mode 100644
index 000000000000..5c4742faec44
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rxtx/sample.yaml
@@ -0,0 +1,9 @@
+sample:
+  name: Modem trace flash
+tests:
+  sample.nrf9160.modem_trace_flash:
+    build_only: true
+    integration_platforms:
+      - nrf9160dk_nrf9160_ns
+    platform_allow: nrf9160dk_nrf9160_ns
+    tags: ci_build
diff --git a/samples/dect/dect_phy/hello_dect_rxtx/src/main.c b/samples/dect/dect_phy/hello_dect_rxtx/src/main.c
new file mode 100644
index 000000000000..cc98036d5fc5
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rxtx/src/main.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+#include <string.h>
+#include <zephyr/kernel.h>
+#include <zephyr/logging/log.h>
+#include <nrf_modem_dect_phy.h>
+#include <modem/nrf_modem_lib.h>
+#include <nrf_modem_at.h>
+#include <zephyr/drivers/hwinfo.h>
+
+LOG_MODULE_REGISTER(app);
+
+#define DATA_LEN_MAX 16
+
+#define CONFIG_TX_INTERVAL_SECONDS 5
+
+static bool exit;
+static uint16_t device_id;
+
+K_SEM_DEFINE(modem_sem, 0, 1);
+K_SEM_DEFINE(tx_sem, 0, 1);
+K_SEM_DEFINE(rx_sem, 0, 1);
+
+struct phy_ctrl_field_common
+{
+	uint32_t packet_length           : 4;
+	uint32_t packet_length_type      : 1;
+	uint32_t header_format           : 3;
+	uint32_t short_network_id        : 8;
+	uint32_t transmitter_id_hi : 8;
+	uint32_t transmitter_id_lo : 8;
+	uint32_t df_mcs         : 3;
+	uint32_t reserved       : 1;
+	uint32_t transmit_power : 4;
+	uint32_t pad            : 24;
+};
+
+static void tx_timer_callback(struct k_timer *dummy)
+{
+	k_sem_give(&tx_sem);
+}
+
+K_TIMER_DEFINE(tx_timer, tx_timer_callback, NULL);
+
+/* ETSI TS 103 636-2  spec 8.3.3 RSSI is reported every 0.5dbm */
+int32_t calcRSSI(int16_t recrssi){
+	return (int32_t)(-20 + ((recrssi + 1) * 0.5));
+}
+
+/* Callback after init operation. */
+void init(const uint64_t *time, int16_t temp, enum nrf_modem_dect_phy_err err,
+	  const struct nrf_modem_dect_phy_modem_cfg *cfg)
+{
+	if (err) {
+		LOG_ERR("Init failed, err %d", err);
+		exit = true;
+		return;
+	}
+
+	k_sem_give(&modem_sem);
+}
+
+/* Callback after deinit operation. */
+void deinit(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	if (err) {
+		LOG_ERR("Deinit failed, err %d", err);
+		return;
+	}
+
+	k_sem_give(&modem_sem);
+}
+
+/* Operation complete notification. */
+void op_complete(const uint64_t *time, int16_t temperature,
+		 enum nrf_modem_dect_phy_err err, uint32_t handle)
+{
+	LOG_DBG("operation_complete_cb Status %d Handle %d", err, handle);
+	k_sem_give(&modem_sem);
+}
+
+/* Callback after receive stop operation. */
+void rx_stop(const uint64_t *time, enum nrf_modem_dect_phy_err err, uint32_t handle)
+{
+	LOG_DBG("operation_stop_cb Status %d Handle %d", err, handle);
+	k_sem_give(&modem_sem);
+}
+
+/* Physical Control Channel reception notification. */
+void pcc(
+	const uint64_t *time,
+	const struct nrf_modem_dect_phy_rx_pcc_status *status,
+	const union nrf_modem_dect_phy_hdr *hdr)
+{
+	struct phy_ctrl_field_common *header = (struct phy_ctrl_field_common *)hdr->type_1;
+	LOG_INF("Received header from device ID %d",
+		header->transmitter_id_hi << 8 |  header->transmitter_id_lo);
+}
+
+/* Physical Control Channel CRC error notification. */
+void pcc_crc_err(const uint64_t *time,
+		 const struct nrf_modem_dect_phy_rx_pcc_crc_failure *crc_failure)
+{
+	return;
+}
+
+/* Physical Data Channel reception notification. */
+void pdc( const uint64_t *time,
+	  const struct nrf_modem_dect_phy_rx_pdc_status *status,
+	  const void *data, uint32_t len)
+{
+	int32_t rx_rssi;
+
+	rx_rssi = calcRSSI(status->rssi_2);
+
+	LOG_INF("Received data (RSSI: %d): %s", rx_rssi, (char *)data);
+
+	k_sem_give(&rx_sem);
+}
+
+/* Physical Data Channel CRC error notification. */
+void pdc_crc_err(
+	const uint64_t *time, const struct nrf_modem_dect_phy_rx_pdc_crc_failure *crc_failure)
+{
+	return;
+}
+
+/* RSSI measurement result notification. */
+void rssi(const uint64_t *time, const struct nrf_modem_dect_phy_rssi_meas *status)
+{
+	LOG_DBG("RSSI measurement for carrier %d", status->carrier);
+	k_sem_give(&modem_sem);
+}
+
+/* callback after link configuration operation. */
+void link_config(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	return;
+}
+
+/* Callback after time queuery operation. */
+void time_get(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	LOG_DBG("time_query_cb time %"PRIu64" Status %d", *time, err);
+}
+
+/* Callback after capability get operation. */
+void capability_get(const uint64_t *time, enum nrf_modem_dect_phy_err err,
+		    const struct nrf_modem_dect_phy_capability *capability)
+{
+	LOG_DBG("capability_get time %"PRIu64" Status %d", *time, err);
+}
+
+/* Dect PHY callbacks. */
+struct nrf_modem_dect_phy_callbacks dect_phy_callbacks = {
+	.init = init,
+	.deinit = deinit,
+	.op_complete = op_complete,
+	.rx_stop = rx_stop,
+	.pcc = pcc,
+	.pcc_crc_err = pcc_crc_err,
+	.pdc = pdc,
+	.pdc_crc_err = pdc_crc_err,
+	.rssi = rssi,
+	.link_config = link_config,
+	.time_get = time_get,
+	.capability_get = capability_get,
+};
+
+/* Dect PHY init parameters. */
+struct nrf_modem_dect_phy_init_params dect_phy_init_params = {
+	.harq_rx_expiry_time_us = 5000000,
+	.harq_rx_process_count = 4,
+};
+
+/* Send and receive operation, start immediately. */
+int modem_txrx(uint32_t handle, void *data, size_t data_len)
+{
+	int err;
+	union nrf_modem_dect_phy_hdr phyHeader;
+
+	struct phy_ctrl_field_common header = {
+		.header_format = (uint8_t)0x0,
+		.packet_length_type =  (uint8_t)0x0,
+		.packet_length = (uint8_t) 0x01,
+		.short_network_id = (uint8_t)(CONFIG_NETWORK_ID & 0xff),
+
+		.transmitter_id_hi = (uint8_t) (device_id >> 8),
+		.transmitter_id_lo = (uint8_t) (device_id & 0xff),
+		.transmit_power = CONFIG_TX_POWER,
+		.reserved = 0,
+		.df_mcs = CONFIG_MCS,
+	};
+
+	memcpy(&phyHeader, &header, 5);
+
+	struct nrf_modem_dect_phy_tx_rx_params txrxOpsParams = {
+		.tx = {
+			.start_time = 0,
+			.handle = handle,
+			.network_id = CONFIG_NETWORK_ID,
+			.phy_type = 0,
+			.lbt_rssi_threshold_max = 0,
+			.carrier = CONFIG_CARRIER,
+			.lbt_period = NRF_MODEM_DECT_LBT_PERIOD_MAX,
+			.phy_header = &phyHeader,
+			.data = data,
+			.data_size = data_len,
+		},
+		.rx = {
+			.start_time = 0,
+			.handle = handle,
+			.network_id = CONFIG_NETWORK_ID,
+			.mode = NRF_MODEM_DECT_PHY_RX_MODE_SINGLE_SHOT,
+			.rssi_interval = NRF_MODEM_DECT_PHY_RSSI_INTERVAL_OFF,
+			.link_id = NRF_MODEM_DECT_PHY_LINK_UNSPECIFIED,
+			.rssi_level = -60,
+			.carrier = CONFIG_CARRIER,
+			.duration = CONFIG_RX_TIMEOUT_S * MSEC_PER_SEC * NRF_MODEM_DECT_MODEM_TIME_TICK_RATE_KHZ,
+			.filter.short_network_id = CONFIG_NETWORK_ID & 0xff,
+			.filter.is_short_network_id_used = 1,
+			/* listen for everything (broadcast mode used) */
+			.filter.receiver_identity = 0,
+		}
+	};
+
+	memcpy(&phyHeader.type_1, &header, 5);
+
+	k_sem_take(&modem_sem, K_FOREVER);
+
+	err = nrf_modem_dect_phy_tx_rx(&txrxOpsParams);
+	if (err!=0) {
+		return err;
+	}
+
+	return 0;
+}
+
+int main(void)
+{
+	int err;
+	uint32_t handle = 0;
+
+	uint8_t tx_buf[DATA_LEN_MAX];
+	size_t tx_len;
+	uint32_t tx_counter_value = 0;
+
+	LOG_INF("Dect NR+ PHY sample started");
+
+	err = nrf_modem_lib_init();
+	if (err) {
+		LOG_ERR("modem init failed, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_callback_set(&dect_phy_callbacks);
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_callback_set failed, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_init(&dect_phy_init_params);
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_init failed, err %d", err);
+		return err;
+	}
+
+	k_sem_take(&modem_sem, K_FOREVER);
+	k_sem_give(&modem_sem);
+	if (exit) {
+		return -EIO;
+	}
+
+	hwinfo_get_device_id((void *)&device_id, sizeof(device_id));
+
+	LOG_INF("Dect NR+ PHY initialized, device ID: %d", device_id);
+
+
+	k_timer_start(&tx_timer, K_SECONDS(CONFIG_TX_INTERVAL_SECONDS),
+		      K_SECONDS(CONFIG_TX_INTERVAL_SECONDS));
+
+	while (1) {
+		/** Transmitting message */
+		LOG_INF("Transmitting message %d", tx_counter_value);
+		tx_len = sprintf(tx_buf, "Hello DECT! %d", tx_counter_value);
+
+		err = modem_txrx(handle, tx_buf, tx_len);
+		if (err) {
+			LOG_ERR("Modem TX failed, err %d", err);
+			return err;
+		}
+
+		handle++;
+		tx_counter_value++;
+
+		if ((tx_counter_value >= CONFIG_TX_TRANSMISSIONS) && CONFIG_TX_TRANSMISSIONS) {
+			LOG_INF("Reached maximum number of transmissions (%d)",
+				CONFIG_TX_TRANSMISSIONS);
+			break;
+		} else if (tx_counter_value == UINT32_MAX) {
+			tx_counter_value = 0;
+		}
+
+		k_sem_take(&tx_sem, K_FOREVER);
+	}
+
+	k_timer_stop(&tx_timer);
+
+	LOG_INF("Shutting down");
+
+	err = nrf_modem_dect_phy_deinit();
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_deinit() failed, err %d", err);
+		return err;
+	}
+
+	k_sem_take(&modem_sem, K_FOREVER);
+
+	err = nrf_modem_lib_shutdown();
+	if (err) {
+		LOG_ERR("nrf_modem_lib_shutdown() failed, err %d", err);
+		return err;
+	}
+
+	LOG_INF("Bye!");
+
+	return 0;
+}
diff --git a/samples/dect/dect_phy/hello_dect_rxtx/west.yml b/samples/dect/dect_phy/hello_dect_rxtx/west.yml
new file mode 100644
index 000000000000..725725c119fe
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_rxtx/west.yml
@@ -0,0 +1,48 @@
+# The west manifest file for the Nordic Modem Library.
+#
+# The per-installation west configuration file specifies the location of this
+# manifest file. The "path" option in the [manifest] section of .west/config
+# defines the folder that contains west.yml. The path is relative to the folder
+# that contains .west. See the west documentation for more information.
+
+manifest:
+  defaults:
+    remote: ncs
+
+  remotes:
+    - name: ncs
+      url-base: https://github.com/nrfconnect
+    - name: nordicsemi
+      url-base: https://github.com/NordicSemiconductor
+    - name: nordicplayground
+      url-base: https://github.com/NordicPlayground
+    - name: eivindj-nordic
+      url-base: https://github.com/lemrey
+
+  group-filter:
+    - -default
+    - -test
+
+  # Use the `ncs` remote when updating the manifest to tag a release.
+  # Otherwise, if submitting a PR to libmodem which needs changes `sdk-nrf` or `nrfxlib`,
+  # submit a PR to the integration branches in `nrfxlib` and `sdk-nrf` (lemrey/libmodem)
+  # and point the manifest to those PR (pull/xxx/head).
+  # This is necessary for CI to run correctly on the PR to libmodem.
+  # Finally, when the PRs to the integration branches are merged,
+  # update the manifest in your libmodem PR to point to the integration
+  # branches instead, i.e. lemrey/libmodem.
+
+  projects:
+    - name: libmodem
+      path: libmodem
+      remote: nordicplayground
+      revision: main
+      import: true
+
+    - name: nrf-dect
+      path: nrf-dect
+      remote: nordicsemi
+      revision: pull/4/head
+
+  self:
+    path: eivindj-nordic/dect-testapp
diff --git a/samples/dect/dect_phy/hello_dect_tx/CMakeLists.txt b/samples/dect/dect_phy/hello_dect_tx/CMakeLists.txt
new file mode 100644
index 000000000000..e7b554343b74
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_tx/CMakeLists.txt
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+cmake_minimum_required(VERSION 3.20.0)
+
+find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
+project(hello_dect)
+
+# NORDIC SDK APP START
+target_sources(app PRIVATE src/main.c)
+# NORDIC SDK APP END
diff --git a/samples/dect/dect_phy/hello_dect_tx/Kconfig b/samples/dect/dect_phy/hello_dect_tx/Kconfig
new file mode 100644
index 000000000000..ef2f912a7377
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_tx/Kconfig
@@ -0,0 +1,49 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+config CARRIER
+	int "Carrier to use"
+	default 1677 #during development, remove default from sample so cutomer must address it?-
+	help
+	   The availability of the channels and the exact regulation to use them varies in different countries.
+	   See ETSI TS 103 636-2 5.4.2 for the calculation.
+
+config NETWORK_ID
+	int "Network ID"
+	range 1 4294967295
+	default 91
+
+config MCS
+	int "MCS"
+	default 1
+	help
+	   The MCS impacts how much data can be fit into subslots/slots.
+
+config TX_POWER
+	int "Transmission power"
+	range 0 11
+	default 11
+	help
+	   TX power, 11 == 19 dBm, maximum of the HW(!)
+
+config TX_INTERVAL_SECONDS
+	int "Transmission interval in seconds"
+	default 5
+
+config TX_TRANSMISSIONS
+	int "TX transmissions"
+	range 0 4294967295
+	default 0
+	help
+	   Transmissions before sample exits, use 0 to transmit forever.
+
+module = DECT_PHY_HELLO_TX
+module-str = DECT NR+ PHY hello DECT
+source "${ZEPHYR_BASE}/subsys/logging/Kconfig.template.log_config"
+
+menu "Zephyr Kernel"
+source "Kconfig.zephyr"
+endmenu
diff --git a/samples/dect/dect_phy/hello_dect_tx/README.rst b/samples/dect/dect_phy/hello_dect_tx/README.rst
new file mode 100644
index 000000000000..d3c398b7db7b
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_tx/README.rst
@@ -0,0 +1,95 @@
+.. _nrf_modem_dect_phy_hello:
+
+nRF91x1: DECT NR+ PHY hello sample
+##################################
+
+.. contents::
+   :local:
+   :depth: 2
+
+This sample demonstrates how to set up a simple DECT NR+ application with the DECT PHY modem firmware.
+
+.. important::
+
+   DECT NR+ operates on free but regulated radio channels. The regulation and availability of the channels varies in different countries.
+   It is the responsibility of the developer to operate the devices according to the local regulation, both at the development site and the device operation regions.
+
+Requirements
+************
+
+The sample needs at least two nRF91x1 Development Kits.
+
+See :ref:`nrf91x1_ug_intro` for more details.
+
+.. note::
+
+   The :ref:`nrf_modem_dect_phy_simple` require a special modem firmware to run on the nRF91x1 modem core. Please contact our sales department to know more.
+
+
+.. include:: /includes/tfm.txt
+
+Overview
+********
+
+The sample shows a simple broadcast of DECT NR+ messages from one device to other devices on a hard-coded channel.
+
+During initialization the devices listens on the channel for broadcast transmissions.
+Dependent on the detection of transmissions, the device takes one of the following roles:
+
+* If no transmission is detected, the device takes the role as a tranceiver. In this role, the device sends an incrementing counter value on the hard-coded channel. The period between each transmission is decided by the :kconfig:option:`CONFIG_TX_INTERVAL_SECONDS` Kconfig option.
+* If a transmission is detected, the device takes the role as a receiver. In this role, the device listens for incomming messages.
+  By comparing the counter value with the previous one, the device detects if messages are lost in transmission.
+
+The device will exit the sample if the user presses button 1, ``exit`` is entered in the terminal or if an irrecoverable error occurs.
+A device in the receiving role will also exit if no message is received within a given number of transmission cycles, see :kconfig:option:`CONFIG_TX_TRANSMISSION_CYCLES_BEFORE_EXIT.
+
+Upon exit, devices in the receiving role will print a simple statistics.
+Each device can be reset to run the sample again.
+
+TX Mode: led 1 on, led 2 blinks
+RX mode: led 1 off, led 2 blinks
+
+User interface
+***************
+
+Button 1:
+   Exits the sample.
+
+
+Building and running
+********************
+
+.. |sample path| replace:: :file:`samples/modem_trace_flash`
+
+.. include:: /includes/build_and_run_ns.txt
+
+Testing
+=======
+
+|test_sample|
+
+After programming the sample to your development kits, test it by performing the following steps:
+
+#. |connect_kit|
+#. |connect_terminal|
+#. Observe that the device will start listening for incomming data. If data is received, the device will take the receiver role, if not the device will take the transmitter role.
+#. Observe that the transmitter device will transmit a counter value that is received by the other devices.
+#. Press button 1 on the transmitter device. Observe that the device stops transmitting, and the other devices stop receiving.
+#. After some time, observe that the receiver devices prints the simple statistics and exit the sample.
+
+
+Dependencies
+************
+
+It uses the following `sdk-nrfxlib`_ libraries:
+
+* :ref:`nrfxlib:nrf_modem`
+
+It uses the following Zephyr libraries:
+
+* :ref:`zephyr:uart_api`
+
+
+In addition, it uses the following secure firmware components:
+
+* :ref:`Trusted Firmware-M <ug_tfm>`
diff --git a/samples/dect/dect_phy/hello_dect_tx/prj.conf b/samples/dect/dect_phy/hello_dect_tx/prj.conf
new file mode 100644
index 000000000000..1bc35301c91d
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_tx/prj.conf
@@ -0,0 +1,9 @@
+CONFIG_DK_LIBRARY=y
+CONFIG_LOG=y
+
+CONFIG_MODEM_ANTENNA_AT_MAGPIO=""
+CONFIG_MODEM_ANTENNA_AT_COEX0=""
+
+CONFIG_NRF_MODEM_LIB=y
+
+CONFIG_NRF_MODEM_LINK_BINARY_DECT_PHY=y
diff --git a/samples/dect/dect_phy/hello_dect_tx/sample.yaml b/samples/dect/dect_phy/hello_dect_tx/sample.yaml
new file mode 100644
index 000000000000..5c4742faec44
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_tx/sample.yaml
@@ -0,0 +1,9 @@
+sample:
+  name: Modem trace flash
+tests:
+  sample.nrf9160.modem_trace_flash:
+    build_only: true
+    integration_platforms:
+      - nrf9160dk_nrf9160_ns
+    platform_allow: nrf9160dk_nrf9160_ns
+    tags: ci_build
diff --git a/samples/dect/dect_phy/hello_dect_tx/src/main.c b/samples/dect/dect_phy/hello_dect_tx/src/main.c
new file mode 100644
index 000000000000..733a76172805
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_tx/src/main.c
@@ -0,0 +1,312 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+#include <string.h>
+#include <zephyr/kernel.h>
+#include <zephyr/logging/log.h>
+#include <nrf_modem_dect_phy.h>
+#include <modem/nrf_modem_lib.h>
+#include <nrf_modem_at.h>
+
+LOG_MODULE_REGISTER(app);
+
+#define DATA_LEN_MAX 16
+
+#define CONFIG_TX_INTERVAL_SECONDS 5
+
+static bool exit;
+
+static uint8_t tx_buf[DATA_LEN_MAX];
+
+K_SEM_DEFINE(modem_sem, 0, 1);
+K_SEM_DEFINE(tx_sem, 0, 1);
+
+struct phy_ctrl_field_common
+{
+	uint32_t packet_length           : 4;
+	uint32_t packet_length_type      : 1;
+	uint32_t header_format           : 3;
+	uint32_t short_network_id        : 8;
+	uint32_t transmitter_id_hi : 8;
+	uint32_t transmitter_id_lo : 8;
+	uint32_t df_mcs         : 3;
+	uint32_t reserved       : 1;
+	uint32_t transmit_power : 4;
+	uint32_t pad            : 24;
+};
+
+static void tx_timer_callback(struct k_timer *dummy)
+{
+	k_sem_give(&tx_sem);
+}
+
+K_TIMER_DEFINE(tx_timer, tx_timer_callback, NULL);
+
+/* ETSI TS 103 636-2  spec 8.3.3 RSSI is reported every 0.5dbm */
+int32_t calcRSSI(int16_t recrssi){
+	return (int32_t)(-20 + ((recrssi + 1) * 0.5));
+}
+
+/* Callback after init operation. */
+void init(const uint64_t *time, int16_t temp, enum nrf_modem_dect_phy_err err,
+	  const struct nrf_modem_dect_phy_modem_cfg *cfg)
+{
+	if (err) {
+		LOG_ERR("Init failed, err %d", err);
+		exit = true;
+		return;
+	}
+
+	k_sem_give(&modem_sem);
+}
+
+/* Callback after deinit operation. */
+void deinit(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	if (err) {
+		LOG_ERR("Deinit failed, err %d", err);
+		return;
+	}
+
+	k_sem_give(&modem_sem);
+}
+
+/* Operation complete notification. */
+void op_complete(const uint64_t *time, int16_t temperature,
+		 enum nrf_modem_dect_phy_err err, uint32_t handle)
+{
+	LOG_DBG("operation_complete_cb Status %d Handle %d", err, handle);
+	k_sem_give(&modem_sem);
+}
+
+/* Callback after receive stop operation. */
+void rx_stop(const uint64_t *time, enum nrf_modem_dect_phy_err err, uint32_t handle)
+{
+	LOG_DBG("operation_stop_cb Status %d Handle %d", err, handle);
+	k_sem_give(&modem_sem);
+}
+
+/* Physical Control Channel reception notification. */
+void pcc(
+	const uint64_t *time,
+	const struct nrf_modem_dect_phy_rx_pcc_status *status,
+	const union nrf_modem_dect_phy_hdr *hdr)
+{
+	return;
+}
+
+/* Physical Control Channel CRC error notification. */
+void pcc_crc_err(const uint64_t *time,
+		 const struct nrf_modem_dect_phy_rx_pcc_crc_failure *crc_failure)
+{
+	return;
+}
+
+/* Physical Data Channel reception notification. */
+void pdc( const uint64_t *time,
+	  const struct nrf_modem_dect_phy_rx_pdc_status *status,
+	  const void *data, uint32_t len)
+{
+	return;
+}
+
+/* Physical Data Channel CRC error notification. */
+void pdc_crc_err(
+	const uint64_t *time, const struct nrf_modem_dect_phy_rx_pdc_crc_failure *crc_failure)
+{
+	return;
+}
+
+/* RSSI measurement result notification. */
+void rssi(const uint64_t *time, const struct nrf_modem_dect_phy_rssi_meas *status)
+{
+	LOG_DBG("RSSI measurement for carrier %d", status->carrier);
+	k_sem_give(&modem_sem);
+}
+
+/* callback after link configuration operation. */
+void link_config(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	return;
+}
+
+/* Callback after time queuery operation. */
+void time_get(const uint64_t *time, enum nrf_modem_dect_phy_err err)
+{
+	LOG_DBG("time_query_cb time %"PRIu64" Status %d", *time, err);
+}
+
+/* Callback after capability get operation. */
+void capability_get(const uint64_t *time, enum nrf_modem_dect_phy_err err,
+		    const struct nrf_modem_dect_phy_capability *capability)
+{
+	LOG_DBG("capability_get time %"PRIu64" Status %d", *time, err);
+}
+
+/* Dect PHY callbacks. */
+struct nrf_modem_dect_phy_callbacks dect_phy_callbacks = {
+	.init = init,
+	.deinit = deinit,
+	.op_complete = op_complete,
+	.rx_stop = rx_stop,
+	.pcc = pcc,
+	.pcc_crc_err = pcc_crc_err,
+	.pdc = pdc,
+	.pdc_crc_err = pdc_crc_err,
+	.rssi = rssi,
+	.link_config = link_config,
+	.time_get = time_get,
+	.capability_get = capability_get,
+};
+
+/* Dect PHY init parameters. */
+struct nrf_modem_dect_phy_init_params dect_phy_init_params = {
+	.harq_rx_expiry_time_us = 5000000,
+	.harq_rx_process_count = 4,
+};
+
+/* Send operation, start immediately. */
+int modem_tx(uint32_t handle, void *data, size_t data_len)
+{
+	int err;
+	union nrf_modem_dect_phy_hdr phyHeader;
+	struct nrf_modem_dect_phy_tx_params txOpsParams = { 0 };
+
+
+	struct phy_ctrl_field_common header = {
+		.header_format = (uint8_t)0x0,
+		.packet_length_type =  (uint8_t)0x0,
+		.packet_length = (uint8_t) 0x01,
+		.short_network_id = (uint8_t)(CONFIG_NETWORK_ID & 0xff),
+
+		.transmitter_id_hi = (uint8_t) (0x0101 >> 8),
+		.transmitter_id_lo = (uint8_t) (0x0101 & 0xff),
+		.transmit_power = CONFIG_TX_POWER,
+		.reserved = 0,
+		.df_mcs = CONFIG_MCS,
+	};
+
+	memcpy(&phyHeader.type_1, &header, 5);
+
+	txOpsParams.start_time = 0;
+	txOpsParams.handle = handle;
+	txOpsParams.network_id = CONFIG_NETWORK_ID;
+	txOpsParams.phy_type = 0;
+	txOpsParams.lbt_rssi_threshold_max = 0;
+	txOpsParams.carrier = CONFIG_CARRIER;
+	txOpsParams.lbt_period = NRF_MODEM_DECT_LBT_PERIOD_MAX;
+	txOpsParams.phy_header = &phyHeader;
+	txOpsParams.data = data;
+	txOpsParams.data_size = data_len;
+
+	k_sem_take(&modem_sem, K_FOREVER);
+
+	err = nrf_modem_dect_phy_tx(&txOpsParams);
+	if (err!=0) {
+		return err;
+	}
+
+	return 0;
+}
+
+/* Transmit counter value on the air. */
+static int transmit_counter(uint32_t counter)
+{
+	int err;
+	size_t len;
+
+	/* Format TX buffer */
+	len = sprintf(tx_buf, "Hello DECT! %d", counter);
+
+	err = modem_tx(counter, tx_buf, len);
+	if (err) {
+		LOG_ERR("Modem TX failed, err %d", err);
+		return err;
+	}
+
+	return 0;
+}
+
+int main(void)
+{
+	int err;
+	uint32_t tx_counter_value = 0;
+
+	LOG_INF("Dect NR+ PHY sample started");
+
+	err = nrf_modem_lib_init();
+	if (err) {
+		LOG_ERR("modem init failed, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_callback_set(&dect_phy_callbacks);
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_callback_set failed, err %d", err);
+		return err;
+	}
+
+	err = nrf_modem_dect_phy_init(&dect_phy_init_params);
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_init failed, err %d", err);
+		return err;
+	}
+
+	k_sem_take(&modem_sem, K_FOREVER);
+	k_sem_give(&modem_sem);
+	if (exit) {
+		return -EIO;
+	}
+
+
+	LOG_INF("Dect NR+ PHY initialized %d", err);
+
+
+	k_timer_start(&tx_timer, K_NO_WAIT, K_SECONDS(CONFIG_TX_INTERVAL_SECONDS));
+
+	while (1) {
+		LOG_INF("Transmitting");
+		err = transmit_counter(tx_counter_value);
+		if (err) {
+			LOG_ERR("transmit failed, err %d", err);
+			continue;
+		}
+
+		LOG_INF("Data sent %d",tx_counter_value);
+
+		tx_counter_value++;
+
+		if ((tx_counter_value >= CONFIG_TX_TRANSMISSIONS) && CONFIG_TX_TRANSMISSIONS) {
+			break;
+		} else if (tx_counter_value == UINT32_MAX) {
+			tx_counter_value = 0;
+		}
+
+		k_sem_take(&tx_sem, K_FOREVER);
+	}
+
+	k_timer_stop(&tx_timer);
+
+	LOG_INF("Reached maximum number of transmissions (%d)", CONFIG_TX_TRANSMISSIONS);
+	LOG_INF("Shutting down");
+
+	err = nrf_modem_dect_phy_deinit();
+	if (err) {
+		LOG_ERR("nrf_modem_dect_phy_deinit() failed, err %d", err);
+		return err;
+	}
+
+	k_sem_take(&modem_sem, K_FOREVER);
+
+	err = nrf_modem_lib_shutdown();
+	if (err) {
+		LOG_ERR("nrf_modem_lib_shutdown() failed, err %d", err);
+		return err;
+	}
+
+	LOG_INF("Bye!");
+
+	return 0;
+}
diff --git a/samples/dect/dect_phy/hello_dect_tx/west.yml b/samples/dect/dect_phy/hello_dect_tx/west.yml
new file mode 100644
index 000000000000..725725c119fe
--- /dev/null
+++ b/samples/dect/dect_phy/hello_dect_tx/west.yml
@@ -0,0 +1,48 @@
+# The west manifest file for the Nordic Modem Library.
+#
+# The per-installation west configuration file specifies the location of this
+# manifest file. The "path" option in the [manifest] section of .west/config
+# defines the folder that contains west.yml. The path is relative to the folder
+# that contains .west. See the west documentation for more information.
+
+manifest:
+  defaults:
+    remote: ncs
+
+  remotes:
+    - name: ncs
+      url-base: https://github.com/nrfconnect
+    - name: nordicsemi
+      url-base: https://github.com/NordicSemiconductor
+    - name: nordicplayground
+      url-base: https://github.com/NordicPlayground
+    - name: eivindj-nordic
+      url-base: https://github.com/lemrey
+
+  group-filter:
+    - -default
+    - -test
+
+  # Use the `ncs` remote when updating the manifest to tag a release.
+  # Otherwise, if submitting a PR to libmodem which needs changes `sdk-nrf` or `nrfxlib`,
+  # submit a PR to the integration branches in `nrfxlib` and `sdk-nrf` (lemrey/libmodem)
+  # and point the manifest to those PR (pull/xxx/head).
+  # This is necessary for CI to run correctly on the PR to libmodem.
+  # Finally, when the PRs to the integration branches are merged,
+  # update the manifest in your libmodem PR to point to the integration
+  # branches instead, i.e. lemrey/libmodem.
+
+  projects:
+    - name: libmodem
+      path: libmodem
+      remote: nordicplayground
+      revision: main
+      import: true
+
+    - name: nrf-dect
+      path: nrf-dect
+      remote: nordicsemi
+      revision: pull/4/head
+
+  self:
+    path: eivindj-nordic/dect-testapp
diff --git a/west.yml b/west.yml
index afa1bb3222e0..e2d137be8514 100644
--- a/west.yml
+++ b/west.yml
@@ -39,6 +39,8 @@ manifest:
       url-base: https://github.com/BabbleSim
     - name: bosch
       url-base: https://github.com/boschsensortec
+    - name: lemrey
+      url-base: https://github.com/lemrey
 
   # If not otherwise specified, the projects below should be obtained
   # from the ncs remote.
@@ -142,7 +144,8 @@ manifest:
     - name: nrfxlib
       repo-path: sdk-nrfxlib
       path: nrfxlib
-      revision: v2.6.0
+      remote: lemrey
+      revision: pull/44/head
     - name: trusted-firmware-m
       repo-path: sdk-trusted-firmware-m
       path: modules/tee/tf-m/trusted-firmware-m