Stork is a Cloud Native storage operator runtime scheduler plugin. It translates a scheduler's orchestration decisions into someting that an external cloud native storage solution can act upon. By doing so, it extends Kubernetes with more stateful awareness of the underlying storage provider, its capabilities and state.
Stork is intended to allow storage operators such as Portworx, EMC-RexRay, and Kubernetes Local Storage to extend upon scheduler actions and allow for a storage-implementation specific orchestration actions around what the orchestrator is trying to do. The most basic example is when the scheduler is trying to spawn a container that is part of a pod - Stork will allow for the storage provider to specify an appropriate node on which that container needs to run such that it's data access is local to the runtime of the container. This is one of many orchestration scenarios that is adressed by this project.
Stork can be used to co-locate pods with where their data is located. This is achieved by using a kubernetes scheduler extender. The scheduler is configured to use stork as an extender. So every time a pod is being scheduled, the scheduler will send filter and prioritize requests to stork. Stork will then check with the storage driver You can either configure the default kubernetes scheduler to communicate with stork or launch another instance of kube-scheduler.
If you are not able to update the schedulerName for you applications to use stork, you can enable the app-initializer feature. This uses the Kubernetes AdmissionController Initializer feature to automatically update the scheduler to stork if your application (deployment or statefulset) is using volumes backed by the configured driver.
To enable the Initializer you need to:
- Enable the Intializer feature in your Kubernetes cluster since it is an alpha feature.
- Add "--app-initializer=true" option to stork (in either the deployment or daemonset spec file)
- Add the stork-initializer spec to you Kubernetes cluster using
kubectl create -f stork-initializer.yaml
Stork will monitor the health of the volume driver on the different nodes. If the volume driver on a node becomes unhealthy pods on that node using volumes from the driver will not be able to access their data. In this case stork will relocate pods on to other nodes so that they can continue running.
Stork uses the external-storage project from kubernetes-incubator to add support for snapshots.
Refer to Snapshots with Stork for instructions on creating and using snapshots with Stork.
This feature allows you to specify pre and post rules that are run on the application pods before and after a snapshot is triggered. This allows users to perform actions like quiescing or flushing data from applications before a snapshot is taken and resume I/O after the snapshot is taken. The commands will be run in pods which are using the PVC being snapshotted.
Read Configuring application consistent snapshots for further details.
Stork is written in Golang. To build Stork:
# git clone git@github.com:libopenstorage/stork.git
# export DOCKER_HUB_REPO=myrepo
# export DOCKER_HUB_STORK_IMAGE=stork
# export DOCKER_HUB_STORK_TAG=latest
# export DOCKER_HUB_CMD_EXECUTOR_IMAGE=cmdexecutor
# export DOCKER_HUB_CMD_EXECUTOR_TAG=latest
# make
# make container
# make deploy
This will create the Docker image $(DOCKER_HUB_REPO)/$(DOCKER_HUB_STORK_IMAGE):$(DOCKER_HUB_TAG).
Now that you have stork in a container image, you can just create a pod config for it and run it in your Kubernetes cluster. We do this via a deployment.
A Deployment manages a Replica Set which in turn manages the pods, thereby making stork resilient to failures. The deployment spec is defined in specs/stork-deployment.yaml. By default the deployment does the following
- Uses the latest stable image of stork to start a pod. You can update the tag to use a specific version or use your own stork image.
- Creates a service to provide an endpoint that can be used to reach the extender.
- Creates a ConfigMap which can be used by a scheduler to communicate with stork.
- Uses the Portworx (pxd) driver for stork.
You can either update the default kube scheduler to use stork or start a new scheduler instance which can use stork. Once this has been deployed the scheduler can be used to schedule any pods with the added advantage that it will also try to optimize the storage requirements for the pod.
You might not always have access to your default scheduler to update it's config options. So the recommended way to start stork is to launch another instance of the scheduler and configure it to use stork
In order to run stork in your Kubernetes cluster, just create the deployment specified in the config above in a Kubernetes cluster:
# kubectl create -f stork-deployment.yaml
Verify that the stork pod is running:
# kubectl get pods --namespace=kube-system
NAME READY STATUS RESTARTS AGE
....
stork-6dc5d66997-4rs2w 1/1 Running 1 27m
stork-6dc5d66997-fl8wr 1/1 Running 1 27m
stork-6dc5d66997-xvnbj 1/1 Running 1 27m
....
We will then start a new scheduler instance here and configure it to use stork. We will call the new scheduler 'stork'. This new scheduler instance is defined in specs/stork-scheduler.yaml. This spec starts 3 replicas of the scheduler.
You will need to update the version of kube scheduler that you want to use. This should be the same version as your kubernetes cluster. Example for Kubernetes v1.8.1 it would be:
image: gcr.io/google_containers/kube-scheduler-amd64:v1.8.1
You can deploy it by running the following command:
# kubectl create -f stork-scheduler.yaml
Verify that the scheduler pods are running:
# kubectl get pods --namespace=kube-system
NAME READY STATUS RESTARTS AGE
....
stork-scheduler-9d6cb4546-gqdq2 1/1 Running 0 32m
stork-scheduler-9d6cb4546-k4z8t 1/1 Running 0 32m
stork-scheduler-9d6cb4546-tfkh4 1/1 Running 0 30m
....
When using stork with the default scheduler, stork needs to be run as a deamon set. This is to avoid a deadlock when trying to schedule the stork pods from the scheduler.
First create the stork daemonset defined in specs/stork-daemonset.yaml
# kubectl create -f stork-daemonset.yaml
Verify that the stork pod is running:
# kubectl get pods --namespace=kube-system
NAME READY STATUS RESTARTS AGE
....
stork-6dc5d66997-4rs2w 1/1 Running 1 27m
stork-6dc5d66997-fl8wr 1/1 Running 1 27m
stork-6dc5d66997-xvnbj 1/1 Running 1 27m
....
To configure your default scheduler to use stork add the following arguments to the scheduler and restart the scheduler if required:
--policy-configmap=stork-config --policy-configmap-namespace=kube-system
You will also need to make sure that the kube-scheduler clusterrole has permissions to read config maps. If not, run the following command:
# kubectl edit clusterrole -n kube-system system:kube-scheduler
And add the following permissions:
- apiGroups: ['']
resources: ['configmaps']
verbs: ['get']
In order to schedule a given pod using the Stork scheduler, specify the name of the scheduler in that pod spec:
kind: PersistentVolumeClaim
apiVersion: v1
metadata:
name: mysql-data
annotations:
volume.beta.kubernetes.io/storage-class: px-mysql-sc
spec:
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 2Gi
---
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
name: px-mysql-sc
provisioner: kubernetes.io/portworx-volume
parameters:
repl: "2"
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: mysql
spec:
strategy:
rollingUpdate:
maxSurge: 1
maxUnavailable: 1
type: RollingUpdate
replicas: 1
selector:
matchLabels:
app: mysql
template:
metadata:
labels:
app: mysql
version: "1"
spec:
schedulerName: stork
containers:
- image: mysql:5.6
name: mysql
env:
- name: MYSQL_ROOT_PASSWORD
value: password
ports:
- containerPort: 3306
volumeMounts:
- name: mysql-persistent-storage
mountPath: /var/lib/mysql
volumes:
- name: mysql-persistent-storage
persistentVolumeClaim:
claimName: mysql-dataThe above spec will create a mysql pod with a Portworx volume having 2 replicas. The pod will then get scheduled on a node in the cluster where one of the replicas is located. If one of those nodes does not have enough cpu or memory resources then it will get scheduled on any other node in the cluster where the driver (in this case Portworx) is running.