From 9d05d1919c8b9586539afe5abd4b626c9d72c323 Mon Sep 17 00:00:00 2001 From: Tobias Kaupat Date: Mon, 30 Sep 2019 13:01:57 +0200 Subject: [PATCH] Create changelog.md --- changelog.md | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 changelog.md diff --git a/changelog.md b/changelog.md new file mode 100644 index 0000000..e00ddff --- /dev/null +++ b/changelog.md @@ -0,0 +1,69 @@ +Lobaro Maintenance Tool +======================== + +## Changelog + +### 1.4.9 - 17.09.2019 +- Fix a bug where flashing firmware fails due to UART buffer issues + +### 1.4.4 - 11.09.2019 +- Fix a bug that failed to flash very big firmware files. +- Add delays when communicating with Bootloader to avoid timing issues. +- Flash command now support --verbose flag + +### 1.4.3 - 30.07.2019 +- Fix a bug where writing the config does not work. + +### 1.4.2 - 29.07.2019 +- Fix a bug where the program hangs up while connecting to a wrong serial port in "auto" mode. +- Fix a bug where the tool crashes when flashing the firmware while not connected. + +### 1.4.0 - 10.08.2018 + +- Log Tool events like Connect, Disconnect, Read Config, etc. to UART Log +- Switch to firmware mode after connecting with "auto" port + +### 1.3.4 - 09.08.2018 +- Always switch to Firmware run mode after: Connect, Load Config, Restore Config. + +### 1.3.3 +- Internet Explorer support + +### 1.3.2 - 09.07.2018 +- Fix reading configs bigger than 256 Bytes (needed for wMbus Bridge) + +### 1.3.0 - 21.03.2018 +- Improve connection detection +- Allow to connect to specific serial port +- Do not reset to boot mode when connecting to selected serial port + +### 1.2.5 - 07.03.2018 +- Fix issues with loading a configuration file. Default is now "config.yaml" +- Remove horizontal scrollbars in tabs +- Add "Set Time" button to send "time=" via UART +- Add send UART input below Log +- Display if Firmware or Booloader is running +- Add success message when loading config + +### 1.2.4 - 07.03.2018 + +- Allow to replace assets e.g. the logo by placing /assets/logo.png next to the executable + +### 1.2.3 - 05.03.2018 +- Log Timestamp in UART log file on disk +- Allow to set http server ip and port to allow remote access + +### 1.2.2 - 19.02.2018 +- Fix CBOR decoding error that was introduced in 1.2.0 (see: https://github.com/ugorji/go/issues/232) + +### 1.2.0 - 16.02.2018 +- Fix Serial port issues that appear on MAC, Linux and in rare cases on Windows + +### 1.2.0 - 15.02.2018 +- Log UART output to file in $HOME/.lobaro/ + +### 1.1.x +- Restore Default Config +- Close button +- Closing the browser window now also shut down the server +