You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
With the charger is off (paused), change the current to 15A.
I can confirm the current is set in the Emporia app.
When I turn on the charger, it doesn't charge at 15A, but instead it charges at the amperage that it was set to when it was last on.
When I look in the Emporia app, the charger is still set to 15A, but the current being delivered is not the same:
See in the pic above, the current is set to 15A, but it's delivering 35A.
If I change the current now when the charger is on, the set current stays at 15, but the delivered current changes with what I set from Home Assistant.
I'm pretty sure it wasn't doing this a while ago. I tried downloading 0.9.1, but I see the same behaviour there as well.
The Emporia app says the EV Charger FW is: EVCharger-467.
The text was updated successfully, but these errors were encountered:
I'm using 0.9.3.
I'm noticing some odd behaviour.
When I look in the Emporia app, the charger is still set to 15A, but the current being delivered is not the same:
![Screenshot_20240327-215308](https://private-user-images.githubusercontent.com/40327874/317586603-a31dff61-ef9e-46f7-93b8-1be448dce7e2.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiJnaXRodWIuY29tIiwiYXVkIjoicmF3LmdpdGh1YnVzZXJjb250ZW50LmNvbSIsImtleSI6ImtleTUiLCJleHAiOjE3MjU5NjYxMjQsIm5iZiI6MTcyNTk2NTgyNCwicGF0aCI6Ii80MDMyNzg3NC8zMTc1ODY2MDMtYTMxZGZmNjEtZWY5ZS00NmY3LTkzYjgtMWJlNDQ4ZGNlN2UyLnBuZz9YLUFtei1BbGdvcml0aG09QVdTNC1ITUFDLVNIQTI1NiZYLUFtei1DcmVkZW50aWFsPUFLSUFWQ09EWUxTQTUzUFFLNFpBJTJGMjAyNDA5MTAlMkZ1cy1lYXN0LTElMkZzMyUyRmF3czRfcmVxdWVzdCZYLUFtei1EYXRlPTIwMjQwOTEwVDEwNTcwNFomWC1BbXotRXhwaXJlcz0zMDAmWC1BbXotU2lnbmF0dXJlPWFmMDhlYmNiZThkMjhiM2RkNzFkOTgzZGRmN2E1ZDUwYzMzYTc1MmM4NzdmYjRmNTVmZTk5MGQ2MjM4N2Y4NDcmWC1BbXotU2lnbmVkSGVhZGVycz1ob3N0JmFjdG9yX2lkPTAma2V5X2lkPTAmcmVwb19pZD0wIn0.ys1uIoBUQ3ip9cOwosebenlk5aRp-ycZf_5eBYEgnhY)
See in the pic above, the current is set to 15A, but it's delivering 35A.
If I change the current now when the charger is on, the set current stays at 15, but the delivered current changes with what I set from Home Assistant.
I'm pretty sure it wasn't doing this a while ago. I tried downloading 0.9.1, but I see the same behaviour there as well.
The Emporia app says the EV Charger FW is: EVCharger-467.
The text was updated successfully, but these errors were encountered: