Skip to content

Latest commit

 

History

History
152 lines (115 loc) · 4.07 KB

ssd1306_python.IIC.md

File metadata and controls

152 lines (115 loc) · 4.07 KB
Raw

ssd1306_IIC python3 module

Last modification: 14.06.2021

List of python files:

Chip description The SSD1306 OLED/PLED dot-matrix display IC's. 128x64 dots.

ssd1306_constant.py

  • list of SSD1306 chip registers and their statuses

ssd1306.py

  • SSD1306 - main chip class
  • SSD1306.set_command - call commands in command mode.
  • SSD1306.display - display prepared image into chip
  • SSD1306.data - call data in data mode.
  • SSD1306.sw_reset - software Reset CHIP (emulate HW reset)
  • SSD1306.setup - initial setup of CHIP, not necessary to use

render.py file under MIT License, Copyright (c) 2019 Vincent Studio library for rendering image in virtual canvas in defined size

  • used PIL library and feature Image, ImageDraw
  • used qrcode library for qrcode generation
sudo pip3 install pillow
sudo pip3 install qrcode
sudo apt-get install libopenjp2-7-dev

How to call python sub?

see ssd1309_i2c_test.py script located in python_test_scripts directory

set logging:

logging.basicConfig(level=logging.INFO

set for INFO level logging. possible used DEBUG, ERROR loogin script will produce log ssd1309.log

initialize chip:

sens = ssd1309.SSD1309()

sw reset:

ret = sens.sw_reset()     # make sw reset of chip, emulate hardware reset of chip

default preparation of chip like it is after hardware reset.

return value: (<ret>)

  • ret = 0 -> correct software reset, ret > 0 -> issue during resetting

setup:

ret = sens.setup()

my recommended Display setup, similar to sw reset.

return value: (<ret>)

  • ret = 0 -> correct setup, ret > 0 -> issue during setup

Chip is setting in two modes:*

  • command mode - chip is waiting for commands
  • data mode - chip is waiting for data that will be displayed

write command:

ret = sens.set_command( register = <command>, value = <value#1>, value2 = <value#2>)

write command into chip. There are three types of commands:

  • direct command ( there is not set value and value2 )
  • one value command ( set command name and value as data )
  • two byte command ( set command name and value and value2 as data )
  • command range ( set command in range, range is set by value parameter )
    • SET_COLUMN_LO could be in range 0x00 - 0x0F when you want to set 0x0F ( sens.set_command( register = 'SET_COLUMN_LO', value = 0x0F ) 0x0F will be added tu SET_COLUMN_LO value -> 0x00 + 0x0F => 0x0F is final command that is prepared to write into the Chip

return value: (<ret>)

  • ret = 0 -> correct writing, ret > 0 -> issue during writing process

data:

self.data(data = <data>)

used mostly internally by display def

  • send in sequence raw of data into the RAM of chip.

display:

self.device.display(self.image)

mostly used by render.py library

  • display image

return value: (<ret>)

  • ret = 0 -> correct display, ret > 0 -> issue during displaying process

How to write Picture or Text into display?

  • writing picture or text into display is done by render.py library functionality

example of writing image which is prepared in file:

with render.canvas(disp) as draw:
  zoom = Image.open('images/zoom.png')
  draw.bitmap((0, 0), zoom, fill=1)
  zoom.close()
  del draw

example of writing image and text:

with render.canvas(disp) as draw:
 sleep(5)
 logo = Image.open('images/comet_black_white_62x62.png')
 draw.bitmap((0, 0), logo, fill=1)
 draw.text((75, 20), 'eComet', font=font, fill=1)
 draw.text((90, 32 ), 'Slovakia', font=font, fill=1)
 logo.close()
 del draw

font of the letters could be set by ttf file:

font = ImageFont.truetype('./fonts/C&C Red Alert [INET].ttf', 12)

output of test script:

pi@raspberrypi:~/ecomet_i2c_raspberry_tools $ python3 ssd1306_i2c_test.py
3.7.3 (default, Jan 22 2021, 20:04:44)
[GCC 8.3.0]

video from running script:

ssd1306 test sequence

Note: for more details look into ssd1306_i2c_test.py