config.sample.yaml

# Configuration specific to AS registration. Unless other marked, all fields
# are *REQUIRED*.
# Unless otherwise specified, these keys CANNOT be hot-reloaded.
homeserver:
  # The URL to the home server for client-server API calls
  url: "http://localhost:8008"

  # Drop Matrix messages which are older than this number of seconds, according to
  # the event's origin_server_ts.
  # If the bridge is down for a while, the homeserver will attempt to send all missed
  # events on reconnection. These events may be hours old, which can be confusing to
  # IRC users if they are then bridged. This option allows these old messages to be
  # dropped.
  # CAUTION: This is a very coarse heuristic. Federated homeservers may have different
  # clock times and hence produce different origin_server_ts values, which may be old
  # enough to cause *all* events from the homeserver to be dropped.
  # Default: 0 (don't ever drop)
  # This key CAN be hot-reloaded.
  # dropMatrixMessagesAfterSecs: 300 # 5 minutes

  # The 'domain' part for user IDs on this home server. Usually (but not always)
  # is the "domain name" part of the HS URL.
  domain: "localhost"

  # Should presence be enabled for matrix clients on this bridge. If disabled on the
  # homeserver then it should also be disabled here to avoid excess traffic.
  # Default: true
  enablePresence: true

  # Which port should the appservice bind to. Can be overriden by the one provided in the
  # command line! Optional.
  # bindPort: 8090

  # Use this option to force the appservice to listen on another hostname for transactions.
  # This is NOT your synapse hostname. E.g. use 127.0.0.1 to only listen locally. Optional.
  # bindHostname: 0.0.0.0

# Configuration specific to the IRC service
ircService:
  # All server keys can be hot-reloaded, however existing IRC connections
  # will not have changes applied to them.
  servers:
    # The address of the server to connect to.
    irc.example.com:
      # A human-readable short name. This is used to label IRC status rooms
      # where matrix users control their connections.
      # E.g. 'ExampleNet IRC Bridge status'.
      # It is also used in the Third Party Lookup API as the instance `desc`
      # property, where each server is an instance.
      name: "ExampleNet"
      # Additional addresses to connect to, used for load balancing between IRCDs.
      additionalAddresses: [ "irc2.example.com" ]
      # Typically additionalAddresses would be in addition to the address key given above,
      # but some configurations wish to exclusively use additional addresses while reserving
      # the top key for identification purposes. Set this to true to exclusively use the
      # additionalAddresses array when connecting to servers.
      onlyAdditionalAddresses: false
      #
      # [DEPRECATED] Use `name`, above, instead.
      # A human-readable description string
      # description: "Example.com IRC network"

      # An ID for uniquely identifying this server amongst other servers being bridged.
      # networkId: "example"

      # MXC URL to an icon used as the network icon whenever this network appear in
      # a network list. (Like in the Element room directory, for instance.)
      # icon: mxc://matrix.org/LpsSLrbANVrEIEOgEaVteItf

      # The port to connect to. Optional.
      port: 6697
      # Whether to use SSL or not. Default: false.
      ssl: true
      # Whether or not IRC server is using a self-signed cert or not providing CA Chain
      sslselfsign: false
      # Should the connection attempt to identify via SASL (if a server or user password is given)
      # If false, this will use PASS instead. If SASL fails, we do not fallback to PASS.
      sasl: false
      # Whether to allow expired certs when connecting to the IRC server.
      # Usually this should be off. Default: false.
      allowExpiredCerts: false
      # Set additional TLS options for the connections to the IRC server.
      #tlsOptions:
        # A specific CA to trust instead of the default CAs. Optional.
        #ca: |
        #  -----BEGIN CERTIFICATE-----
        #  ...
        #  -----END CERTIFICATE-----
        # Server name for the SNI (Server Name Indication) TLS extension. If the address you
        # are using does not report the correct certificate name, you can override it here.
        # servername: real.server.name
        # ...or any options in https://nodejs.org/api/tls.html#tls_tls_connect_options_callback

      #
      # The connection password to send for all clients as a PASS (or SASL, if enabled above) command. Optional.
      # password: 'pa$$w0rd'
      #
      # Whether or not to send connection/error notices to real Matrix users. Default: true.
      sendConnectionMessages: true

      quitDebounce:
        # Whether parts due to net-splits are debounced for delayMs, to allow
        # time for the netsplit to resolve itself. A netsplit is detected as being
        # a QUIT rate higher than quitsPerSecond. Default: false.
        enabled: false
        # The maximum number of quits per second acceptable above which a netsplit is
        # considered ongoing. Default: 5.
        quitsPerSecond: 5
        # The time window in which to wait before bridging a QUIT to Matrix that occurred during
        # a netsplit. Debouncing is jittered randomly between delayMinMs and delayMaxMs so that the HS
        # is not sent many requests to leave rooms all at once if a netsplit occurs and many
        # people to not rejoin.
        # If the user with the same IRC nick as the one who sent the quit rejoins a channel
        # they are considered back online and the quit is not bridged, so long as the rejoin
        # occurs before the randomly-jittered timeout is not reached.
        # Default: 3600000, = 1h
        delayMinMs: 3600000 # 1h
        # Default: 7200000, = 2h
        delayMaxMs: 7200000 # 2h

      # A map for conversion of IRC user modes to Matrix power levels. This enables bridging
      # of IRC ops to Matrix power levels only, it does not enable the reverse. If a user has
      # been given multiple modes, the one that maps to the highest power level will be used.
      modePowerMap:
        o: 50
        v: 1

      botConfig:
        # Enable the presence of the bot in IRC channels. The bot serves as the entity
        # which maps from IRC -> Matrix. You can disable the bot entirely which
        # means IRC -> Matrix chat will be shared by active "M-Nick" connections
        # in the room. If there are no users in the room (or if there are users
        # but their connections are not on IRC) then nothing will be bridged to
        # Matrix. If you're concerned about the bot being treated as a "logger"
        # entity, then you may want to disable the bot. If you want IRC->Matrix
        # but don't want to have TCP connections to IRC unless a Matrix user speaks
        # (because your client connection limit is low), then you may want to keep
        # the bot enabled. Default: true.
        # NB: If the bot is disabled, you SHOULD have matrix-to-IRC syncing turned
        #     on, else there will be no users and no bot in a channel (meaning no
        #     messages to Matrix!) until a Matrix user speaks which makes a client
        #     join the target IRC channel.
        # NBB: The bridge bot IRC client will still join the target IRC network so
        #      it can service bridge-specific queries from the IRC-side e.g. so
        #      real IRC clients have a way to change their Matrix display name.
        #      See https://github.com/matrix-org/matrix-appservice-irc/issues/55
        enabled: true
        # The nickname to give the AS bot.
        nick: "MatrixBot"
        # The username to give to the AS bot. Defaults to "matrixbot"
        username: "matrixbot"
        # The password to give to NickServ or IRC Server for this nick. Optional.
        # password: "helloworld"
        #
        # Join channels even if there are no Matrix users on the other side of
        # the bridge. Set to false to prevent the bot from joining channels which have no
        # real matrix users in them, even if there is a mapping for the channel.
        # Default: true
        joinChannelsIfNoUsers: true

      # Configuration for PMs / private 1:1 communications between users.
      privateMessages:
        # Enable the ability for PMs to be sent to/from IRC/Matrix.
        # Default: true.
        enabled: true
        # Prevent Matrix users from sending PMs to the following IRC nicks.
        # Optional. Default: [].
        # exclude: ["Alice", "Bob"] # NOT YET IMPLEMENTED

        # Should created Matrix PM rooms be federated? If false, only users on the
        # HS attached to this AS will be able to interact with this room.
        # Optional. Default: true.
        federate: true

      # Configuration for mappings not explicitly listed in the 'mappings'
      # section.
      dynamicChannels:
        # Enable the ability for Matrix users to join *any* channel on this IRC
        # network.
        # Default: false.
        enabled: true
        # Should the AS create a room alias for the new Matrix room? The form of
        # the alias can be modified via 'aliasTemplate'. Default: true.
        createAlias: true
        # Should the AS publish the new Matrix room to the public room list so
        # anyone can see it? Default: true.
        published: true
        # Publish the rooms to the homeserver directory, as oppose to the appservice
        # room directory. Only used if `published` is on.
        # Default: false
        useHomeserverDirectory: true
        # What should the join_rule be for the new Matrix room? If 'public',
        # anyone can join the room. If 'invite', only users with an invite can
        # join the room. Note that if an IRC channel has +k or +i set on it,
        # join_rules will be set to 'invite' until these modes are removed.
        # Default: "public".
        joinRule: public
        # Should created Matrix rooms be federated? If false, only users on the
        # HS attached to this AS will be able to interact with this room.
        # Default: true.
        federate: true
        # Force this room version when creating IRC channels. Beware if the homeserver doesn't
        # support the room version then the request will fail. By default, no version is requested.
        # roomVersion: "1"
        # The room alias template to apply when creating new aliases. This only
        # applies if createAlias is 'true'. The following variables are exposed:
        # $SERVER => The IRC server address (e.g. "irc.example.com")
        # $CHANNEL => The IRC channel (e.g. "#python")
        # This MUST have $CHANNEL somewhere in it.
        #
        # In certain circumstances you might want to bridge your whole IRC network as a
        # homeserver (e.g. #matrix:libera.chat). For these use cases, you can set the
        # template to just be $CHANNEL. Doing so will preclude you from supporting
        # other prefix characters though.
        #
        # Default: '#irc_$SERVER_$CHANNEL'
        aliasTemplate: "#irc_$CHANNEL"
        # A list of user IDs which the AS bot will send invites to in response
        # to a !join. Only applies if joinRule is 'invite'. Default: []
        # whitelist:
        #   - "@foo:example.com"
        #   - "@bar:example.com"
        #
        # Prevent the given list of channels from being mapped under any
        # circumstances.
        # exclude: ["#foo", "#bar"]

      # excludedUsers:
      #   - regex: "@.*:evilcorp.com"
      #     kickReason: "We don't like Evilcorp"

      # Configuration for controlling how Matrix and IRC membership lists are
      # synced.
      membershipLists:
        # Enable the syncing of membership lists between IRC and Matrix. This
        # can have a significant effect on performance on startup as the lists are
        # synced. This must be enabled for anything else in this section to take
        # effect. Default: false.
        enabled: false

        # Syncing membership lists at startup can result in hundreds of members to
        # process all at once. This timer drip feeds membership entries at the
        # specified rate. Default: 10000. (10s)
        floodDelayMs: 10000

        global:
          ircToMatrix:
            # Get a snapshot of all real IRC users on a channel (via NAMES) and
            # join their virtual matrix clients to the room.
            initial: false
            # Make virtual matrix clients join and leave rooms as their real IRC
            # counterparts join/part channels. Default: false.
            incremental: false
            # Should the bridge check if all Matrix users are connected to IRC and
            # joined to the channel before relaying messages into the room.
            #
            # This is considered a safety net to avoid any leakages by the bridge to
            # unconnected users, but given it ignores all IRC messages while users
            # are still connecting it may be overkill.
            requireMatrixJoined: false

          matrixToIrc:
            # Get a snapshot of all real Matrix users in the room and join all of
            # them to the mapped IRC channel on startup. Default: false.
            initial: false
            # Make virtual IRC clients join and leave channels as their real Matrix
            # counterparts join/leave rooms. Make sure your 'maxClients' value is
            # high enough! Default: false.
            incremental: false

        # Apply specific rules to Matrix rooms. Only matrix-to-IRC takes effect.
        rooms:
          - room: "!fuasirouddJoxtwfge:localhost"
            matrixToIrc:
              initial: false
              incremental: false

        # Apply specific rules to IRC channels. Only IRC-to-matrix takes effect.
        channels:
          - channel: "#foo"
            ircToMatrix:
              initial: false
              incremental: false
              requireMatrixJoined: false

        # Should the bridge ignore users which are not considered active on the bridge
        # during startup
        ignoreIdleUsersOnStartup:
          enabled: true
          # How many hours can a user be considered idle for before they are considered
          # ignoreable
          idleForHours: 720
          # A regex which will exclude matching MXIDs from this check.
          exclude: "foobar"

      mappings:
        # 1:many mappings from IRC channels to room IDs on this IRC server.
        # The matrix room must already exist. Your matrix client should expose
        # the room ID in a "settings" page for the room.
        "#thepub":
          roomIds: ["!kieouiJuedJoxtVdaG:localhost"]
          # Channel key/password to use. Optional. If provided, matrix users do
          # not need to know the channel key in order to join the channel.
          # key: "secret"

      # Configuration for virtual matrix users. The following variables are
      # exposed:
      # $NICK => The IRC nick
      # $SERVER => The IRC server address (e.g. "irc.example.com")
      matrixClients:
        # The user ID template to use when creating virtual matrix users. This
        # MUST start with an @ and have $NICK somewhere in it.
        # Optional. Default: "@$SERVER_$NICK".
        # Example: "@irc.example.com_Alice:example.com"
        userTemplate: "@irc_$NICK"
        # The display name to use for created matrix clients. This should have
        # $NICK somewhere in it if it is specified. Can also use $SERVER to
        # insert the IRC domain.
        # Optional. Default: "$NICK". Example: "Alice"
        displayName: "$NICK"
        # Number of tries a client can attempt to join a room before the request
        # is discarded. You can also use -1 to never retry or 0 to never give up.
        # Optional. Default: -1
        joinAttempts: -1

      # Configuration for virtual IRC users. The following variables are exposed:
      # $LOCALPART => The user ID localpart ("alice" in @alice:localhost)
      # $USERID => The user ID
      # $DISPLAY => The display name of this user, with excluded characters
      #             (e.g. space) removed. If the user has no display name, this
      #             falls back to $LOCALPART.
      ircClients:
        # The template to apply to every IRC client nick. This MUST have either
        # $DISPLAY or $USERID or $LOCALPART somewhere in it.
        # Optional. Default: "M-$DISPLAY". Example: "M-Alice".
        nickTemplate: "$DISPLAY[m]"
        # True to allow virtual IRC clients to change their nick on this server
        # by issuing !nick <server> <nick> commands to the IRC AS bot.
        # This is completely freeform: it will NOT follow the nickTemplate.
        allowNickChanges: true
        # The max number of IRC clients that will connect. If the limit is
        # reached, the client that spoke the longest time ago will be
        # disconnected and replaced.
        # Optional. Default: 30.
        maxClients: 30
        # IPv6 configuration.
        ipv6:
          # Optional. Set to true to force IPv6 for outgoing connections.
          only: false
          # Optional. The IPv6 prefix to use for generating unique addresses for each
          # connected user. If not specified, all users will connect from the same
          # (default) address. This may require additional OS-specific work to allow
          # for the node process to bind to multiple different source addresses
          # Linux kernels 4.3+ support sysctl net.ipv6.ip_nonlocal_bind=1
          # Older kernels will need IP_FREEBIND, which requires an LD_PRELOAD with the library
          # https://github.com/matrix-org/freebindfree as Node does not expose setsockopt.
          # prefix: "2001:0db8:85a3::"  # modify appropriately

          # Optional. Define blocks of IPv6 addresses for different homeservers
          # which can be used to restrict users of those homeservers to a given
          # IP. These blocks should be considered immutable once set, as changing
          # the startFrom value will NOT adjust existing IP addresses.
          # Changing the startFrom value to a lower value may conflict with existing clients.
          # Multiple homeservers may NOT share blocks.
          blocks:
            - homeserver: another-server.org
              startFrom: '10:0000'
        #
        # The maximum amount of time in seconds that the client can exist
        # without sending another message before being disconnected. Use 0 to
        # not apply an idle timeout. This value is ignored if this IRC server is
        # mirroring matrix membership lists to IRC. Default: 172800 (48 hours)
        idleTimeout: 10800
        # The number of millseconds to wait between consecutive reconnections if a
        # client gets disconnected. Setting to 0 will cause the scheduling to be
        # disabled, i.e. it will be scheduled immediately (with jitter.
        # Otherwise, the scheduling interval will be used such that one client
        # reconnect for this server will be handled every reconnectIntervalMs ms using
        # a FIFO queue.
        # Default: 5000 (5 seconds)
        reconnectIntervalMs: 5000
        # The number of concurrent reconnects if a user has been disconnected unexpectedly
        # (e.g. a netsplit). You should set this to a reasonably high number so that
        # bridges are not waiting an eternity to reconnect all its clients if
        # we see a massive number of disconnect. This is unrelated to the reconnectIntervalMs
        # setting above which is for connecting on restart of the bridge. Set to 0 to
        # immediately try to reconnect all users.
        # Default: 50
        concurrentReconnectLimit: 50
        # The number of lines to allow being sent by the IRC client that has received
        # a large block of text to send from matrix. If the number of lines that would
        # be sent is > lineLimit, the text will instead be uploaded to matrix and the
        # resulting URI is treated as a file. As such, a link will be sent to the IRC
        # side instead of potentially spamming IRC and getting the IRC client kicked.
        # Default: 3.
        lineLimit: 3
        # A list of user modes to set on every IRC client. For example, "RiG" would set
        # +R, +i and +G on every IRC connection when they have successfully connected.
        # User modes vary wildly depending on the IRC network you're connecting to,
        # so check before setting this value. Some modes may not work as intended
        # through the bridge e.g. caller ID as there is no way to /ACCEPT.
        # Default: "" (no user modes)
        # userModes: "R"
        # The format of the realname defined for users, either mxid or reverse-mxid
        realnameFormat: "mxid"
        # The minimum time to wait between connection attempts if we were disconnected
        # due to throttling.
        # pingTimeoutMs: 600000
        # The rate at which to send pings to the IRCd if the client is being quiet for a while.
        # Whilst the IRCd *should* be sending pings to us to keep the connection alive, it appears
        # that sometimes they don't get around to it and end up ping timing us out.
        # pingRateMs: 60000
        # Choose which conditions the IRC bridge should kick Matrix users for. Decisions to this from
        # defaults should be taken with care as it may dishonestly repesent Matrix users on the IRC
        # network, and cause your bridge to be banned.
        kickOn:
          # Kick a Matrix user from a bridged room if they fail to join the IRC channel.
          channelJoinFailure: true
          # Kick a Matrix user from ALL rooms if they are unable to get connected to IRC.
          ircConnectionFailure: true
          # Kick a Matrix user from ALL rooms if they choose to QUIT the IRC network.
          userQuit: true


  # Set information about the bridged channel in the room state, so that client's may
  # present relevant UI to the user. MSC2346
  bridgeInfoState:
    enabled: false
    initial: false
  # Configuration for an ident server. If you are running a public bridge it is
  # advised you setup an ident server so IRC mods can ban specific matrix users
  # rather than the application service itself.
  # This key CANNOT be hot-reloaded
  ident:
    # True to listen for Ident requests and respond with the
    # matrix user's user_id (converted to ASCII, respecting RFC 1413).
    # Default: false.
    enabled: false
    # The port to listen on for incoming ident requests.
    # Ports below 1024 require root to listen on, and you may not want this to
    # run as root. Instead, you can get something like an Apache to yank up
    # incoming requests to 113 to a high numbered port. Set the port to listen
    # on instead of 113 here.
    # Default: 113.
    port: 1113
    # The address to listen on for incoming ident requests.
    # Default: 0.0.0.0
    address: "::"

  # Encoding fallback - which text encoding to try if text is not UTF-8. Default: not set.
  # List of supported encodings: https://www.npmjs.com/package/iconv#supported-encodings
  # encodingFallback: "ISO-8859-15"

  # Configuration for logging. Optional. Default: console debug level logging
  # only.
  logging:
    # Level to log on console/logfile. One of error|warn|info|debug
    level: "debug"
    # The file location to log to. This is relative to the project directory.
    logfile: "debug.log"
    # The file location to log errors to. This is relative to the project
    # directory.
    errfile: "errors.log"
    # Whether to log to the console or not.
    toConsole: true
    # The max number of files to keep. Files will be overwritten eventually due
    # to rotations.
    maxFiles: 5

  # Metrics will then be available via GET /metrics on the bridge listening port (-p).
  # This key CANNOT be hot-reloaded
  metrics:
    # Whether to actually enable the metric endpoint. Default: false
    enabled: false
    # Which port to listen on (omit to listen on the bindPort)
    port: 7001
    # Which hostname to listen on (omit to listen on 127.0.0.1), requires port to be set
    host: 127.0.0.1
    # When determining activeness of remote and matrix users, cut off at this number of hours.
    userActivityThresholdHours: 72 # 3 days
    # When collecting remote user active times, which "buckets" should be used. Defaults are given below.
    # The bucket name is formed of a duration and a period. (h=hours,d=days,w=weeks).
    remoteUserAgeBuckets:
      - "1h"
      - "1d"
      - "1w"

  # Configuration options for the debug HTTP API. To access this API, you must
  # append ?access_token=$APPSERVICE_TOKEN (from the registration file) to the requests.
  #
  # The debug API exposes the following endpoints:
  #
  #   GET /irc/$domain/user/$user_id => Return internal state for the IRC client for this user ID.
  #
  #   POST /irc/$domain/user/$user_id => Issue a raw IRC command down this connection.
  #                                      Format: new line delimited commands as per IRC protocol.
  #
  # This key CANNOT be hot-reloaded
  debugApi:
    # True to enable the HTTP API endpoint. Default: false.
    enabled: false
    # The port to host the HTTP API.
    port: 11100

  # Configuration for the provisioning API.
  # This key CANNOT be hot-reloaded
  provisioning:
    # True to enable the provisioning HTTP endpoint. Default: false.
    enabled: true
    # Whether to enable hosting the setup widget page. Default: false.
    widget: true
    # A secure secret token for making provisioner requests. Default: the appservice hs_token.
    secret: $generateMe

    # The number of seconds to wait before giving up on getting a response from
    # an IRC channel operator. If the channel operator does not respond within the
    # allotted time period, the provisioning request will fail.
    # Default: 300 seconds (5 mins)
    requestTimeoutSeconds: 300
    # When provisioning a room, disallow rooms that match these critera
    rules:
      # The bridge checks the joined members of a propective room and checks to see
      # if any users matching these regex sets are in the room. `exempt` users never
      # match, and will be ignored. If any user matches `conflict`, the room will not
      # be allowed to be bridged until the user is removed. Both sets take a regular expression.
      userIds:
        exempt:
          # These users never conflict, even if matching
          - "@doubleagent:badguys.com"
        conflict:
          # These users will deny a room from being bridged.
          - "@.*:badguys.com"

    # Number of channels allowed to be bridged
    roomLimit: 50

    # Endpoint prefix for provisoning requests. Default: "/_matrix/provision"
    # apiPrefix: "/_matrix/provision"
    # Whether to apply rate limiting to the provisioning API. Default: true.
    # ratelimit: true

    # Run a separate HTTP listener for provisioning requests.
    http:
      # The port to listen on.
      port: 7700
      # The host to listen on. Optional. By default this is 0.0.0.0
      # host: 0.0.0.0

    # When users request a token from the bridge to make provisioning
    # requests, disallow any requests that resolve a Matrix server_name included in these ranges.
    # This list should include any internal IPs that the bridge should never lookup.
    # By default, the below list is used.
    # openIdDisallowedIpRanges:
    #  - '127.0.0.0/8'
    #  - '10.0.0.0/8'
    #  - '172.16.0.0/12'
    #  - '192.168.0.0/16'
    #  - '100.64.0.0/10'
    #  - '192.0.0.0/24'
    #  - '169.254.0.0/16'
    #  - '192.88.99.0/24'
    #  - '198.18.0.0/15'
    #  - '192.0.2.0/24'
    #  - '198.51.100.0/24'
    #  - '203.0.113.0/24'
    #  - '224.0.0.0/4'
    #  - '::1/128'
    #  - 'fe80::/10'
    #  - 'fc00::/7'
    #  - '2001:db8::/32'
    #  - 'ff00::/8'
    #  - 'fec0::/10'

  # WARNING: The bridge needs to send plaintext passwords to the IRC server, it cannot
  # send a password hash. As a result, passwords (NOT hashes) are stored encrypted in
  # the database.
  #
  # To generate a .pem file:
  # $ openssl genpkey -out passkey.pem -outform PEM -algorithm RSA -pkeyopt rsa_keygen_bits:2048
  #
  # The path to the RSA PEM-formatted private key to use when encrypting IRC passwords
  # for storage in the database. Passwords are stored by using the admin room command
  # `!storepass server.name passw0rd. When a connection is made to IRC on behalf of
  # the Matrix user, this password will be sent as the server password (PASS command).
  # This key CANNOT be hot-reloaded
  passwordEncryptionKeyPath: "passkey.pem"

  # Config for Matrix -> IRC bridging
  # This key CANNOT be hot-reloaded
  matrixHandler:
    # Cache this many matrix events in memory to be used for m.relates_to messages (usually replies).
    eventCacheSize: 4096

    # format of replies sent shortly after the original message
    shortReplyTemplate: "$NICK: $REPLY"
    # format of replies sent a while after the original message
    longReplyTemplate: "<$NICK> \"$ORIGINAL\" <- $REPLY"
    # how much time needs to pass between the reply and the original message to switch to the long format
    shortReplyTresholdSeconds: 300
    # Ignore users mentioned in a io.element.functional_members state event when checking admin room membership
    ignoreFunctionalMembersInAdminRooms: false

  # Config for the media proxy, required to serve publically accessible URLs to authenticated Matrix media
  mediaProxy:
    # To generate a .jwk file:
    # $ node src/generate-signing-key.js > signingkey.jwk
    signingKeyPath: "signingkey.jwk"
    # How long should the generated URLs be valid for
    ttlSeconds: 3600
    # The port for the media proxy to listen on
    bindPort: 11111
    # The publically accessible URL to the media proxy
    publicUrl: "https://irc.bridge/media"

  # Maximum number of montly active users, beyond which the bridge gets blocked (both ways)
  # RMAUlimit: 100

  # Optional.
  # userActivity:
    # The "grace period" before we start counting users as active
    # minUserActiveDays: 1
    # Time before users are considered inactive again
    # inactiveAfterDays: 30

  ircHandler:
    # Should we attempt to match an IRC side mention (nickaname match)
    # with the nickname's owner's matrixId, if we are bridging them?
    # "on" - Defaults to enabled, users can choose to disable.
    # "off" - Defaults to disabled, users can choose to enable.
    # "force-off" - Disabled, cannot be enabled.
    mapIrcMentionsToMatrix: "on" # This can be "on", "off", "force-off".

    # When handling lots of mode changes, wait this long before setting a power level
    # event in order to batch together changes
    # powerLevelGracePeriod: 1000

  # Map of permissions from user/domain/wildcard to permission level.
  # This is currently used to allow/disallow use of admin commands
  # from the admin room but may be expanded in the future to contain more
  # options. Currently, you may either set the value to be 'admin', or leave the key
  # out to imply that the user does not have special permissions.
  # UserID takes precedence over domain, which takes precedence over wildcard.
  # permissions:
  # '*': admin
  # 'matrix.org': admin
  # '@fibble:matrix.org': admin

  # Allow room moderators to adjust the configuration of the bridge via room state.
  # See docs/room_commands.md
  # Optional: Off by default
  perRoomConfig:
    # Should the bridge use per-room configuration state. If false, the state
    # events will be ignored.
    enabled: false
    # The maximum number that can be set for the `lineLimit` configuration option
    # lineLimitMax: 5
    # Allow matrix admins to disable or require Matrix users to be connected to the
    # channel before any messages can be bridged. i.e. this is the per room
    # version of `membershipLists.[].ircToMatrix.requireMatrixJoined`.
    #
    # If this is true, configuration in the room state will take priority over
    # the configuration in the config file.
    # allowUnconnectedMatrixUsers: true

  # Options for hooking into Matrix moderation policy lists
  banLists:
    # A list of rooms containing "m.policy.rule.*" events which can be used
    # to identify banned users, rooms and servers.
    rooms:
      - "#matrix-org-coc-bl:matrix.org"

# Options here are generally only applicable to large-scale bridges and may have
# consequences greater than other options in this configuration file.
advanced:
  # The maximum number of HTTP(S) sockets to maintain. Usually this is unlimited
  # however for large bridges it is important to rate limit the bridge to avoid
  # accidentally overloading the homeserver. Defaults to 1000, which should be
  # enough for the vast majority of use cases.
  # This key CAN be hot-reloaded
  maxHttpSockets: 1000
  # Max size of an appservice transaction payload, in bytes. Defaults to 10Mb
  # This key CANNOT be hot-reloaded.
  maxTxnSize: 10000000

# Capture information to a sentry.io instance
# This key CANNOT be hot-reloaded.
sentry:
  enabled: false
  dsn: "https://<key>@sentry.io/<project>"
  # Optional. A tag to specify the production environment. Not set by default
  # environment: ""
  # Optional. A tag to specify the server name. Not set by default
  # serverName: ""

# Use an external database to store bridge state.
# This key CANNOT be hot-reloaded.
database:
  # database engine (must be 'postgres' or 'nedb'). Default: nedb
  engine: "postgres"
   # Either a PostgreSQL connection string, or a path to the NeDB storage directory.
   # For postgres, it must start with postgres://
   # For NeDB, it must start with nedb://. The path is relative to the project directory.
  connectionString: "postgres://username:password@host:port/databasename"

# Enable running IRC connections out of a secondary process.
# See https://matrix-org.github.io/matrix-appservice-irc/latest/connection_pooling.html for more information
# connectionPool:
#   # The Redis URI to connect to 
#   redisUrl: redis://user:password@host:port/dbnum
#   # Should the connections persist after the bridge successfully shuts down?
#   persistConnectionsOnShutdown: true