From 024ab642d1cc84bb0cf454583adb59651d19726f Mon Sep 17 00:00:00 2001
From: Jesse Marroquin <jesse.marroquin@analog.com>
Date: Thu, 29 Jun 2023 14:36:00 -0500
Subject: [PATCH] Update MAX32625MBED for A3 silicon

Revision A3 silicon requires use of MAX3262X reset function.
---
 records/board/max32625mbed.yaml             |  1 +
 source/board/max32625mbed.c                 |  2 +-
 source/family/maxim/max32620/target_reset.c | 54 ---------------------
 3 files changed, 2 insertions(+), 55 deletions(-)
 delete mode 100644 source/family/maxim/max32620/target_reset.c

diff --git a/records/board/max32625mbed.yaml b/records/board/max32625mbed.yaml
index da01c2d16f..5820cdbe46 100644
--- a/records/board/max32625mbed.yaml
+++ b/records/board/max32625mbed.yaml
@@ -4,3 +4,4 @@ common:
             - source/board/max32625mbed.c
         family:
             - source/family/maxim/max32625/target.c
+            - source/family/maxim/target_reset_max32xxx.c
diff --git a/source/board/max32625mbed.c b/source/board/max32625mbed.c
index d7c02a3c1a..2906fb3faa 100644
--- a/source/board/max32625mbed.c
+++ b/source/board/max32625mbed.c
@@ -25,7 +25,7 @@
 const board_info_t g_board_info = {
     .info_version = kBoardInfoVersion,
     .board_id = "0415",
-    .family_id = kStub_HWReset_FamilyID,
+    .family_id = kMaxim_MAX3262X_FamilyID,
     .flags = kEnablePageErase,
     .target_cfg = &target_device,
     .daplink_url_name = "MAX32625HTM",
diff --git a/source/family/maxim/max32620/target_reset.c b/source/family/maxim/max32620/target_reset.c
deleted file mode 100644
index 77dd729891..0000000000
--- a/source/family/maxim/max32620/target_reset.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/**
- * @file    target_reset.c
- * @brief   Target reset for the MAX32620
- *
- * DAPLink Interface Firmware
- * Copyright (c) 2009-2016, ARM Limited, All Rights Reserved
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the "License"); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "swd_host.h"
-
-void target_before_init_debug(void)
-{
-    // any target specific sequences needed before attaching
-    // to the DAP across JTAG or SWD
-    return;
-}
-
-uint8_t target_unlock_sequence(void)
-{
-    // if the device can secure the flash and there is a way to
-    //  erase all it should be implemented here.
-    return 1;
-}
-
-uint8_t target_set_state(target_state_t state)
-{
-    // invoke reset by sw (VECT_REQ or SYS_REQ) or hw (hardware IO toggle)
-    // return swd_set_target_state_sw(state);
-    //or
-    return swd_set_target_state_hw(state);
-}
-
-uint8_t security_bits_set(uint32_t addr, uint8_t *data, uint32_t size)
-{
-    // if there are security bits in the programmable flash region
-    //  a check should be performed. This method is used when programming
-    //  by drag-n-drop and should refuse to program an image requesting
-    //  to set the device security. This can be performed with the debug channel
-    //  if needed.
-    return 0;
-}