Support for SH25T (or other models that only have a WiNet-S port and no additional internal port) #298
-
Hi, I'm looking at buying a SH25T Sungrow inverter and would definitely want to be able to control it via something like Home Assistant. However, from the docs I've found (for e.g. page 47 of https://www.memodo.de/media/pdf/a6/3b/cc/memodo-wechselrichter-sungrow-shxt-user-manuel-en_87f641d1f13017d5e4d1c78c5eeddf83.pdf) it seems like it only has a WiNet-S port and no additional internal LAN port. Does anyone know if Modbus TCP works on these models (either over a wireless or ethernet connection through the WiNet-S port)? Or any tips on how I could find this out? The PDF I mentioned earlier suggests that Modbus TCP is meant to work over ethernet through the WiNet-S port (see the "LAN function" section on page 69). A related question is whether it's possible to use the LAN and WLAN connectivity of the WiNet-S for these models at the same time. The docs say "it is not recommended to use both communication methods at the same time", but doesn't say why... I found #277 where another user indicated they have had success with the SH20T which sounds promising, although not with enough details to answer the questions here. Thanks, Carl |
Beta Was this translation helpful? Give feedback.
Replies: 4 comments 29 replies
-
Hi Carl, it does work with the standard WiNet-S2 via WiFi. (I did not test yet but assume LAN would work as well) Just enter the IP of the Wifi adapter which shows up as "espressif" in your router most likely. However some of the registers seem to be not existing in the SHxxT and some are missing like the 3rd MPPT. But general Modbus TCP connection does work |
Beta Was this translation helpful? Give feedback.
-
The manual hosted by that shop is a bit outdated, the Sungrow homepage has a current one: https://ger.sungrowpower.com/productDetail/3024 Apart from that, the SHxT series is covered by the same Modbus documentation as the SHxRT series. Meaning, this project here should work on both. However, SHxT's are still a bit rare, so there's not much user feedback regarding this. |
Beta Was this translation helpful? Give feedback.
-
@chultquist As pointed out by someone involved in the discussion about @little-penguin88's observations regarding MPPT3, another option would be to (ab)use the "logger" (COM2 A1/B1) ports with an RS485 converter to basically re-gain the dedicated Modbus interface, bypassing the WiNet-S2. |
Beta Was this translation helpful? Give feedback.
-
Some data settings for SH25T
|
Beta Was this translation helpful? Give feedback.
Hi Carl,
it does work with the standard WiNet-S2 via WiFi. (I did not test yet but assume LAN would work as well) Just enter the IP of the Wifi adapter which shows up as "espressif" in your router most likely.
However some of the registers seem to be not existing in the SHxxT and some are missing like the 3rd MPPT. But general Modbus TCP connection does work