FYI: Modbus thru wired WiNet-S seems to be working now.

[Hymerx]

I'we just installed this integration on our HA and modbus is working thru Winet-S interface, I had to reboot HA 3 times but then the values showed up. IP addresses of Winet-S modules was present in router probably because they are wired.
We have two SH10RT-v112 with wired WiNet-S - I told the guy who installed them that
we don't want it to run on WiFi.
The installation was made in May 2024.

[Gnarfoz]

According to the Modbus register documentation, the WiNet-S still does not cover 100% of the available registers... Do you have a register documentation newer than October 2023?

Also, the WiNet-S used to be less robust when being polled for a lot of registers at low intervals. Maybe that has improved?

[Hymerx]

No, this is pure observation of behaviour of mine HA, as I wrote "seems to be working".
It would be interesting to check if other people see the same.

[Gnarfoz]

Definitely worth checking out... I don't think it was ever a matter of 0% working vs. 100% working - the WiNet-S results were just worse than using the inverter directly.