Manually adjust the opening/closing time for the roller shutters in Shelly 2.5

[vizlipuzli]

How can I manually adjust the opening and closing times for the roller shutters after calibration? During the process, the default timing doesn’t allow my motorized valve to fully open or close. I need to be able to set the time required manually to ensure complete operation. Does anyone know if there’s a way to customize these settings?

[markirb]

similar to here you can try to adjust:

#985 (comment)
move_time_ms

you seem to misuse Window Shutters for a Valve?

[vizlipuzli]

Exactly, since there’s no valve mode available in the settings. Thanks, this example looks like it could really help!

[vizlipuzli]

I set the movement time to 30 seconds using the command curl http://192.168.1.69/rpc/Config.Set -d '{"config": {"wc1": {"move_time_ms": 30000}}}', then saved the changes and rebooted the Shelly. Now the device interface shows 'movement time: 30 s,' but unfortunately, when I press the open or close button in the interface, the relay still triggers after 5 seconds as it did after calibration. Are there any other parameters I need to set? Here is the config: "wc1": {
"name": "Valve",
"in_mode": 3,
"swap_inputs": false,
"swap_outputs": false,
"calibrated": true,
"idle_power_thr": 5,
"move_power": 2.143536,
"move_time_ms": 30000,
"max_ramp_up_time_ms": 5000,
"obstruction_power_coeff": 2.5,
"obstruction_duration_ms": 3000,
"obstruction_time_coeff": 1.5,
"current_pos": 100
},

[markirb]

Most likely idle_power_thr and max_ramp…. See other similar issue with big windows. cannot say without logs