README.rst

Introduction

A helper library for using the Senserion SHTC3 Humidity and Temperature Sensor

Dependencies

This driver depends on:

• Adafruit CircuitPython
• Bus Device
• Register

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-shtc3

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-shtc3

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-shtc3

Usage Example

import time
import busio
import board
import adafruit_shtc3

i2c = busio.I2C(board.SCL, board.SDA)
sht = adafruit_shtc3.SHTC3(i2c)

while True:
    temperature, relative_humidity = sht.measurements
    print("Temperature: %0.1f C" % temperature)
    print("Humidity: %0.1f %%" % relative_humidity)
    print("")
    time.sleep(1)

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.