README.mysmartgrid

vzlogger has been extended to be able to post the measurement values
to the MySmartGrid Webserver.

For the use of the MySmartGrid Webserver the channel-configuration 
has some MySmartGrid specific parameters

To generate the Unique Ids one can use the command uuidgen


General channel parameters:
===========================

"protocol" can be: "vz" to use the Volkzaehler API
                 "mysmartgrid" to use the MySmartGrid API
"middleware" defines the specific server url
"uuid"       defines the Unique ID of the sensor.

example:
    "protocol"   : "mysmartgrid",
    "middleware" : "https://api.mysmartgrid.de:8443",
    "uuid"       : "e0c9dd9a-8f3c-4fc4-8a99-f2393ca60924",

Mysmartgrid channel parameters
==============================

"type"      should be "sensor" to send the sensor data
"device"    unique id for the server to identifiy the device/vzlogger 
"secretKey" unique secret key to sign the messages to the server

"name"      gives the functionname of the sensor

"channels" : [{...}[,{...}]]

for each channel define:


    "type"       : "sensor",

    "device"     : "52709939-4183-472e-a3bb-78d944da9937",
    "secretKey"  : "57c56da4-5932-497c-bd80-6cb210c0b891",
    "name"       : "s01",

    "interval" : 300, /* */
    /* identifier for measurement: 1-0:1.8.0 */
    "identifier" : "counter",
    "scaler" : 1,  /* sml counter is in Wh */
    // "scaler" : 1000,  /* d0 counter is in kWh */