rad-seq_ligation.pro

<?xml version='1.0' encoding='ASCII' ?>
<Velocity11 file='Protocol_Data' md5sum='6fc72d91deaa3dced07d2e1d87018836' version='2.0' >
	<File_Info AllowSimultaneousRun='0' AutoExportGanttChart='0' AutoLoadRacks='When the main protocol starts' AutoUnloadRacks='1' AutomaticallyLoadFormFile='0' Barcodes_Directory='' DeleteHitpickFiles='1' Description='' Device_File='C:\VWorks Workspace\Device Files\BravoMiniPHBenchCel_round_magnet.dev' DynamicAssignPlateStorageLoad='0' FinishScript='' Form_File='' HandlePlatesInInstance='1' Notes='' PipettePlatesInInstanceOrder='1' Protocol_Alias='' StartScript='' Use_Global_JS_Context='0' />
	<Processes >
		<Startup_Processes >
			<Process >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::JavaScript' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='// Constants:
var MAX_VOLUME = 170;
var MAX_MIX_VOLUME = 150;
var PRE_ASP_LARGE = 15;
var PRE_ASP_MEDIUM = 10;
var PRE_ASP_SMALL = 5;
// Get protocol parameters from global scope:
var global = GetGlobalObject();
if(global.runsetMode) global.updateRunset();
var columns = parseInt(global.formColumns, 10) || 1;
var headMode = &quot;1,2,1,&quot; + columns;

var req = [
	&quot;tipColumn&quot;,
	&quot;reagentColumn&quot;,
	&quot;sampleVolume&quot;,
	&quot;reagentVolume&quot;,
	&quot;bufferVolume&quot;,
	&quot;adapterVolume&quot;,
	&quot;doOffDeckIncubation&quot;
];

var missing = [];
for(var i in req) {
   if(!(req[i] in global.settings)) missing.push(req[i]);
}

if(missing.length) print(&quot;WARNING: The following required variables are missing: &quot; + missing.join(&quot;, &quot;));

var tipColumn = global.settings.tipColumn || 1;
var reagentColumn = global.settings.reagentColumn || 1;
var timeMod = global.timeMod || 1;
var tempRt = global.tempRt || 20;
var sampleVolume = global.settings.sampleVolume;
var reagentVolume = global.settings.reagentVolume;
var bufferVolume = global.settings.bufferVolume;
var adapterVolume = global.settings.adapterVolume;
var incubationTemperature = global.settings.incubationTemperature || tempRt;
var doOffDeckIncubation = global.settings.doOffDeckIncubation;
var incubationTime = global.settings.incubationTime * timeMod;
var protocolName = global.settings.protocolName;

global.statusString = protocolName + &quot; started&quot;;
' />
				</Task>
				<Task Name='Bravo::Set temperature - Position' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='1' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='2' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Location' Value='4' />
						<Parameter Category='' Name='Turn off temperature' Value='0' />
						<Parameter Category='' Name='Temperature' TaskParameterScript='=tempRt;' Value='' />
						<Parameter Category='' Name='Wait' Value='' />
						<Parameter Category='' Name='Temperature Tolerance' Value='' />
						<Parameter Category='' Name='Timeout' Value='1' />
						<Parameter Category='' Name='Allow concurrent operation' Value='0' />
					</Parameters>
				</Task>
				<Task Name='Bravo::Set temperature - Position' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='1' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='3' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Location' Value='6' />
						<Parameter Category='' Name='Turn off temperature' Value='0' />
						<Parameter Category='' Name='Temperature' TaskParameterScript='=tempRt;' Value='' />
						<Parameter Category='' Name='Wait' Value='1' />
						<Parameter Category='' Name='Temperature Tolerance' Value='2' />
						<Parameter Category='' Name='Timeout' Value='10' />
						<Parameter Category='' Name='Allow concurrent operation' Value='0' />
					</Parameters>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='Startup' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
		</Startup_Processes>
		<Main_Processes >
			<Process >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='7' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='7' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='TransferSample' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='TransferSample' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Upstack' >
					<Devices >
						<Device Device_Name='BenchCel - 1' Location_Name='Stacker 4' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='BuiltIn::Signal' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Waitfors_To_Signal >
						<Waitfor Name='SAMPLE_PLATE' />
					</Waitfors_To_Signal>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='SamplePlate' />
					<Parameter Name='Plate type' Value='96 Eppendorf Twin.tec PCR' />
					<Parameter Name='Simultaneous plates' Value='1' />
					<Parameter Name='Plates have lids' Value='0' />
					<Parameter Name='Plates enter the system sealed' Value='0' />
					<Parameter Name='Use single instance of plate' Value='0' />
					<Parameter Name='Automatically update labware' Value='0' />
					<Parameter Name='Enable timed release' Value='0' />
					<Parameter Name='Release time' Value='30' />
					<Parameter Name='Auto managed counterweight' Value='' />
					<Parameter Name='Barcode filename' Value='No Selection' />
					<Parameter Name='Has header' Value='' />
					<Parameter Name='Barcode or header South' Value='No Selection' />
					<Parameter Name='Barcode or header West' Value='No Selection' />
					<Parameter Name='Barcode or header North' Value='No Selection' />
					<Parameter Name='Barcode or header East' Value='No Selection' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
			<Process >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='5' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='5' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotMix' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotMix' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Spawn Process' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Process to spawn' Value='SamplePlate' />
						<Parameter Category='' Name='Spawn as subroutine' Value='' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='TransferSample' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='TransferSample' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Wait For' Waitfor='SAMPLE_PLATE' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='4' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='if(doOffDeckIncubation) task.skip();' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='4' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='SetTemperature' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='SetTemperature' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Incubate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='4' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='if(doOffDeckIncubation) task.skip();
task.Incubationtime = incubationTime;' />
					<Parameters >
						<Parameter Category='' Name='Incubation time' Value='0' />
						<Parameter Category='' Name='Use relative timing' Value='0' />
						<Parameter Category='' Name='Allow plates to incubate at locations with BCRs' Value='0' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='5' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='if(doOffDeckIncubation) task.skip();' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='5' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::User Message' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='322' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='if(!doOffDeckIncubation) task.skip();

task.Body = &quot;Take the Eppendorf plate from &quot; +
	&quot;position 5 of the Bravo deck, seal, place in a thermal &quot; +
	&quot;cycler and run the &quot; + protocolName.toLowerCase() +
	&quot; program. Once the incubation has finished, return the &quot; +
	&quot;plate to position 5 and choose &apos;Continue&apos;.&quot;;' />
					<Parameters >
						<Parameter Category='' Name='Title' Value='Transfer plate' />
						<Parameter Category='' Name='Body' Value='' />
						<Parameter Category='' Name='Only show the first time' Value='' />
						<Parameter Category='Scripting variable data entry' Name='User data entry into variable' Value='0' />
						<Parameter Category='Scripting variable data entry' Name='Variable name' Value='' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='ResetTemperature' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='ResetTemperature' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='TransferBuffer' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='TransferBuffer' />
					</Parameters>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='ReactionPlate' />
					<Parameter Name='Plate type' Value='96 Eppendorf Twin.tec PCR' />
					<Parameter Name='Simultaneous plates' Value='1' />
					<Parameter Name='Plates have lids' Value='0' />
					<Parameter Name='Plates enter the system sealed' Value='0' />
					<Parameter Name='Use single instance of plate' Value='0' />
					<Parameter Name='Automatically update labware' Value='0' />
					<Parameter Name='Enable timed release' Value='0' />
					<Parameter Name='Release time' Value='30' />
					<Parameter Name='Auto managed counterweight' Value='' />
					<Parameter Name='Barcode filename' Value='No Selection' />
					<Parameter Name='Has header' Value='' />
					<Parameter Name='Barcode or header South' Value='No Selection' />
					<Parameter Name='Barcode or header West' Value='No Selection' />
					<Parameter Name='Barcode or header North' Value='No Selection' />
					<Parameter Name='Barcode or header East' Value='No Selection' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
			<Process >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='9' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='if(columns &lt; 7) plate.labware = &quot;96 Eppendorf Twin.tec PCR&quot;;' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='9' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotMix' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotMix' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotAdapter' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotAdapter' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotBuffer' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotBuffer' />
					</Parameters>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='ReagentPlate' />
					<Parameter Name='Plate type' Value='96 Nunc Deep Well 1 mL' />
					<Parameter Name='Simultaneous plates' Value='1' />
					<Parameter Name='Plates have lids' Value='0' />
					<Parameter Name='Plates enter the system sealed' Value='0' />
					<Parameter Name='Use single instance of plate' Value='0' />
					<Parameter Name='Automatically update labware' Value='0' />
					<Parameter Name='Enable timed release' Value='0' />
					<Parameter Name='Release time' Value='30' />
					<Parameter Name='Auto managed counterweight' Value='' />
					<Parameter Name='Barcode filename' Value='No Selection' />
					<Parameter Name='Has header' Value='' />
					<Parameter Name='Barcode or header South' Value='No Selection' />
					<Parameter Name='Barcode or header West' Value='No Selection' />
					<Parameter Name='Barcode or header North' Value='No Selection' />
					<Parameter Name='Barcode or header East' Value='No Selection' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
			<Process >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='2' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='// New tipbox for dispensing master mix' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='2' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotMix' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotMix' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotAdapter' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotAdapter' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Spawn Process' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Process to spawn' Value='FinalPlate' />
						<Parameter Category='' Name='Spawn as subroutine' Value='' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotBuffer' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotBuffer' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Load' >
					<Devices >
						<Device Device_Name='Agilent Labware MiniHub - 1' Location_Name='' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='loadIntoByLocation' Value='' />
						<Parameter Category='' Name='loadIntoByGroup' Value='' />
					</Parameters>
					<Parameter >
						<useOriginalLocations Name='useOriginalLocations' Value='0' />
						<AssignedLocations_Node >
							<LocationInfo Value='Agilent Labware MiniHub - 1, cassette 2, slot 1' />
						</AssignedLocations_Node>
					</Parameter>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='ReagentTips' />
					<Parameter Name='Plate type' Value='96 V11 LT250 Tip Box 19477.002' />
					<Parameter Name='Simultaneous plates' Value='1' />
					<Parameter Name='Plates have lids' Value='0' />
					<Parameter Name='Plates enter the system sealed' Value='0' />
					<Parameter Name='Use single instance of plate' Value='0' />
					<Parameter Name='Automatically update labware' Value='0' />
					<Parameter Name='Enable timed release' Value='0' />
					<Parameter Name='Release time' Value='30' />
					<Parameter Name='Auto managed counterweight' Value='' />
					<Parameter Name='Barcode filename' Value='No Selection' />
					<Parameter Name='Has header' Value='' />
					<Parameter Name='Barcode or header South' Value='No Selection' />
					<Parameter Name='Barcode or header West' Value='No Selection' />
					<Parameter Name='Barcode or header North' Value='No Selection' />
					<Parameter Name='Barcode or header East' Value='No Selection' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
			<Process >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='8' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='8' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotMix' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotMix' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotAdapter' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotAdapter' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotBuffer' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotBuffer' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Load' >
					<Devices >
						<Device Device_Name='Agilent Labware MiniHub - 1' Location_Name='' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='loadIntoByLocation' Value='' />
						<Parameter Category='' Name='loadIntoByGroup' Value='' />
					</Parameters>
					<Parameter >
						<useOriginalLocations Name='useOriginalLocations' Value='0' />
						<AssignedLocations_Node >
							<LocationInfo Value='Agilent Labware MiniHub - 1, cassette 2, slot 2' />
						</AssignedLocations_Node>
					</Parameter>
				</Task>
				<Task Name='BuiltIn::Spawn Process' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Process to spawn' Value='SampleTips' />
						<Parameter Category='' Name='Spawn as subroutine' Value='' />
					</Parameters>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='UsedTips' />
					<Parameter Name='Plate type' Value='96 V11 LT250 Tip Box 19477.002' />
					<Parameter Name='Simultaneous plates' Value='1' />
					<Parameter Name='Plates have lids' Value='0' />
					<Parameter Name='Plates enter the system sealed' Value='0' />
					<Parameter Name='Use single instance of plate' Value='0' />
					<Parameter Name='Automatically update labware' Value='0' />
					<Parameter Name='Enable timed release' Value='0' />
					<Parameter Name='Release time' Value='30' />
					<Parameter Name='Auto managed counterweight' Value='' />
					<Parameter Name='Barcode filename' Value='No Selection' />
					<Parameter Name='Has header' Value='' />
					<Parameter Name='Barcode or header South' Value='No Selection' />
					<Parameter Name='Barcode or header West' Value='No Selection' />
					<Parameter Name='Barcode or header North' Value='No Selection' />
					<Parameter Name='Barcode or header East' Value='No Selection' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
			<Process >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Downstack' >
					<Devices >
						<Device Device_Name='BenchCel - 1' Location_Name='Stacker 1' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Free empty stackers' Value='1' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='8' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='8' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='TransferSample' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='TransferSample' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='TransferBuffer' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='TransferBuffer' />
					</Parameters>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='SampleTips' />
					<Parameter Name='Plate type' Value='96 V11 LT250 Tip Box 19477.002' />
					<Parameter Name='Simultaneous plates' Value='1' />
					<Parameter Name='Plates have lids' Value='0' />
					<Parameter Name='Plates enter the system sealed' Value='0' />
					<Parameter Name='Use single instance of plate' Value='0' />
					<Parameter Name='Automatically update labware' Value='0' />
					<Parameter Name='Enable timed release' Value='0' />
					<Parameter Name='Release time' Value='30' />
					<Parameter Name='Auto managed counterweight' Value='' />
					<Parameter Name='Barcode filename' Value='No Selection' />
					<Parameter Name='Has header' Value='' />
					<Parameter Name='Barcode or header South' Value='No Selection' />
					<Parameter Name='Barcode or header West' Value='No Selection' />
					<Parameter Name='Barcode or header North' Value='No Selection' />
					<Parameter Name='Barcode or header East' Value='No Selection' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
			<Process >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='6' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='6' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotAdapter' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotAdapter' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='4' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='4' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='TransferSample' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='TransferSample' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Upstack' >
					<Devices >
						<Device Device_Name='BenchCel - 1' Location_Name='Stacker 4' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='BuiltIn::Signal' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Waitfors_To_Signal >
						<Waitfor Name='FINAL_PLATE' />
					</Waitfors_To_Signal>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='TransferPlate' />
					<Parameter Name='Plate type' Value='96 Eppendorf Twin.tec PCR' />
					<Parameter Name='Simultaneous plates' Value='1' />
					<Parameter Name='Plates have lids' Value='0' />
					<Parameter Name='Plates enter the system sealed' Value='0' />
					<Parameter Name='Use single instance of plate' Value='0' />
					<Parameter Name='Automatically update labware' Value='0' />
					<Parameter Name='Enable timed release' Value='0' />
					<Parameter Name='Release time' Value='30' />
					<Parameter Name='Auto managed counterweight' Value='0' />
					<Parameter Name='Barcode filename' Value='No Selection' />
					<Parameter Name='Has header' Value='' />
					<Parameter Name='Barcode or header South' Value='No Selection' />
					<Parameter Name='Barcode or header West' Value='No Selection' />
					<Parameter Name='Barcode or header North' Value='No Selection' />
					<Parameter Name='Barcode or header East' Value='No Selection' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
			<Process >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Downstack' >
					<Devices >
						<Device Device_Name='BenchCel - 1' Location_Name='Stacker 2' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Free empty stackers' Value='1' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='6' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='6' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='AliquotBuffer' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='AliquotBuffer' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Storage Incubate' >
					<Devices >
						<Device Device_Name='Agilent Labware MiniHub - 1' Location_Name='' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='incubateAtLocation' Value='' />
						<Parameter Category='' Name='newIncubationTime' Value='0' />
					</Parameters>
					<Parameter >
						<IncubationTime Incubation_Time_MS='10' />
						<RelativeTiming bRelative_Timing='0' />
						<AssignedLocations_Node >
							<LocationInfo Value='Agilent Labware MiniHub - 1, cassette 2, slot 4' />
						</AssignedLocations_Node>
					</Parameter>
				</Task>
				<Task Name='BuiltIn::Wait For' Waitfor='FINAL_PLATE' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='6' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='6' />
					</Parameters>
				</Task>
				<Task Name='Bravo::SubProcess' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Sub-process name' Value='TransferBuffer' />
						<Parameter Category='Static labware configuration' Name='Display confirmation' Value='Don&apos;t display' />
						<Parameter Category='Static labware configuration' Name='1' Value='96 Deep Well PP Sqr Well V Btm' />
						<Parameter Category='Static labware configuration' Name='2' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='3' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='4' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='5' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='6' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='7' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='8' Value='&lt;use default&gt;' />
						<Parameter Category='Static labware configuration' Name='9' Value='&lt;use default&gt;' />
					</Parameters>
					<Parameters >
						<Parameter Centrifuge='0' Name='SubProcess_Name' Pipettor='1' Value='TransferBuffer' />
					</Parameters>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='FinalPlate' />
					<Parameter Name='Plate type' Value='96 Eppendorf Twin.tec PCR' />
					<Parameter Name='Simultaneous plates' Value='1' />
					<Parameter Name='Plates have lids' Value='0' />
					<Parameter Name='Plates enter the system sealed' Value='0' />
					<Parameter Name='Use single instance of plate' Value='0' />
					<Parameter Name='Automatically update labware' Value='0' />
					<Parameter Name='Enable timed release' Value='0' />
					<Parameter Name='Release time' Value='30' />
					<Parameter Name='Auto managed counterweight' Value='0' />
					<Parameter Name='Barcode filename' Value='No Selection' />
					<Parameter Name='Has header' Value='' />
					<Parameter Name='Barcode or header South' Value='No Selection' />
					<Parameter Name='Barcode or header West' Value='No Selection' />
					<Parameter Name='Barcode or header North' Value='No Selection' />
					<Parameter Name='Barcode or header East' Value='No Selection' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
			<Process >
				<Minimized >1</Minimized>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='1' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='1' />
					</Parameters>
				</Task>
				<Task Name='BuiltIn::Place Plate' >
					<Devices >
						<Device Device_Name='Bravo - 1' Location_Name='1' />
					</Devices>
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Device to use' Value='Bravo - 1' />
						<Parameter Category='' Name='Location to use' Value='1' />
					</Parameters>
				</Task>
				<Plate_Parameters >
					<Parameter Name='Plate name' Value='Occupied' />
					<Parameter Name='Plate type' Value='96 Deep Well PP Sqr Well V Btm' />
					<Parameter Name='Simultaneous plates' Value='1' />
					<Parameter Name='Plates have lids' Value='0' />
					<Parameter Name='Plates enter the system sealed' Value='0' />
					<Parameter Name='Use single instance of plate' Value='0' />
					<Parameter Name='Automatically update labware' Value='1' />
					<Parameter Name='Enable timed release' Value='0' />
					<Parameter Name='Release time' Value='30' />
					<Parameter Name='Auto managed counterweight' Value='0' />
					<Parameter Name='Barcode filename' Value='No Selection' />
					<Parameter Name='Has header' Value='' />
					<Parameter Name='Barcode or header South' Value='No Selection' />
					<Parameter Name='Barcode or header West' Value='No Selection' />
					<Parameter Name='Barcode or header North' Value='No Selection' />
					<Parameter Name='Barcode or header East' Value='No Selection' />
				</Plate_Parameters>
				<Quarantine_After_Process >0</Quarantine_After_Process>
			</Process>
			<Pipette_Process Name='AliquotAdapter' >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Group Begin' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='BuiltIn::JavaScript' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='var aliquotVolume = adapterVolume;	// Volume to dispense per well
var maxTipVolume = MAX_VOLUME;	// Tip capacity
var columnsDone = 0;	// Number of columns dispensed so far
var deadVolume = 3;		// Extra liquid volume to aspirate

// Total volume to transfer:
var transferVolume = aliquotVolume * columns;
// The total volume of the largest number of aliquots that fit in one tip:
var maxVolume = aliquotVolume * Math.floor((maxTipVolume - deadVolume) / aliquotVolume);
// Number of aspirations necessary:
var aspirateSteps = Math.ceil(transferVolume / maxVolume);
' />
				</Task>
				<Task Name='Bravo::secondary::Set Head Mode' Task_Type='512' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Head mode' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;d4b0ccac7e9c488ef9b03e8cebe75927&apos; version=&apos;1.0&apos; &gt;
	&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Tips On' Task_Type='16' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='8' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,tipColumn+1]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReagentTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;87d35d96180034e0056ffdc2547aec5c&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;1&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Number of times to loop' TaskParameterScript='=aspirateSteps;' Value='1' />
						<Parameter Category='' Name='Change tips every N times, N = ' Value='1' />
					</Parameters>
					<Variables />
				</Task>
				<Task Name='BuiltIn::JavaScript' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='// Update volumes:
// Volume left to transfer:
var volumeLeft = (columns - columnsDone) * aliquotVolume;
// The actual volume to aspirate:
var tipVolume = (volumeLeft &gt; maxVolume) ? maxVolume + deadVolume : volumeLeft + deadVolume;
// The number of aliquots to dispense from the aspirated volume: 
var dispenseSteps = (tipVolume - deadVolume) / aliquotVolume;' />
				</Task>
				<Task Name='Bravo::secondary::Aspirate' Task_Type='1' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='11' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,reagentColumn+1]];
if(columns &lt; 7) task.Distancefromwellbottom = 0.5;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReagentPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' TaskParameterScript='=tipVolume;' Value='10' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Post-aspirate volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='0.3' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;74e9d6ec2462268e981d0ec1413d81db&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Number of times to loop' TaskParameterScript='=dispenseSteps;' Value='1' />
						<Parameter Category='' Name='Change tips every N times, N = ' Value='1' />
					</Parameters>
					<Variables />
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='6' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,++columnsDone]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='TransferPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='0' />
						<Parameter Category='Volume' Name='Volume' TaskParameterScript='=aliquotVolume;' Value='10' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_normal_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='0.5' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;74e9d6ec2462268e981d0ec1413d81db&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='8' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,reagentColumn+1]];
if(columns == columnsDone) {
	task.Performtiptouch = true;
	task.Whichsidestousefortiptouch = &quot;None&quot;;
	task.Tiptouchretractdistance = (columns &lt; 7) ? -7 : -14.5;
}' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReagentPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='1' />
						<Parameter Category='Volume' Name='Volume' Value='0' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_normal_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='15' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;74e9d6ec2462268e981d0ec1413d81db&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='Bravo::secondary::Tips Off' Task_Type='32' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='6' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,13-tipColumn-1]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='UsedTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Mark tips as used' Value='1' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;0b66e53ebaaaefdbe924ef0817185ea8&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;10&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Group End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Devices >
					<Device Device_Name='Bravo - 1' Location_Name='1' />
				</Devices>
				<Parameters >
					<Parameter Name='Display confirmation' Value='Don&apos;t display' />
					<Parameter Name='2' Value='&lt;use default&gt;' />
					<Parameter Name='3' Value='&lt;use default&gt;' />
					<Parameter Name='4' Value='&lt;use default&gt;' />
					<Parameter Name='5' Value='&lt;use default&gt;' />
					<Parameter Name='6' Value='&lt;use default&gt;' />
					<Parameter Name='7' Value='&lt;use default&gt;' />
					<Parameter Name='8' Value='&lt;use default&gt;' />
					<Parameter Name='9' Value='&lt;use default&gt;' />
				</Parameters>
				<Dependencies />
			</Pipette_Process>
			<Pipette_Process Name='AliquotBuffer' >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Group Begin' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='BuiltIn::JavaScript' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='var aliquotVolume = bufferVolume;	// Volume to dispense per well
var maxTipVolume = MAX_VOLUME;	// Tip capacity
var columnsDone = 0;	// Number of columns dispensed so far
var deadVolume = 3;		// Extra liquid volume to aspirate

// Total volume to transfer:
var transferVolume = aliquotVolume * columns;
// The total volume of the largest number of aliquots that fit in one tip:
var maxVolume = aliquotVolume * Math.floor((maxTipVolume - deadVolume) / aliquotVolume);
// Number of aspirations necessary:
var aspirateSteps = Math.ceil(transferVolume / maxVolume);' />
				</Task>
				<Task Name='Bravo::secondary::Set Head Mode' Task_Type='512' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Head mode' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;d4b0ccac7e9c488ef9b03e8cebe75927&apos; version=&apos;1.0&apos; &gt;
	&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Tips On' Task_Type='16' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='8' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,tipColumn+2]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReagentTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;12f212b5ba8e5ff7835eb1612e8b432e&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;2&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Number of times to loop' TaskParameterScript='=aspirateSteps;' Value='1' />
						<Parameter Category='' Name='Change tips every N times, N = ' Value='1' />
					</Parameters>
					<Variables />
				</Task>
				<Task Name='BuiltIn::JavaScript' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='// Update volumes:
// Volume left to transfer:
volumeLeft = (columns - columnsDone) * aliquotVolume;
// The actual volume to aspirate:
tipVolume = (volumeLeft &gt; maxVolume) ? maxVolume + deadVolume : volumeLeft + deadVolume;
// The number of aliquots to dispense from the aspirated volume: 
dispenseSteps = (tipVolume - deadVolume) / aliquotVolume;' />
				</Task>
				<Task Name='Bravo::secondary::Aspirate' Task_Type='1' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='11' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,reagentColumn+2]];
if(columns &lt; 7) task.Distancefromwellbottom = 0.5;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReagentPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' TaskParameterScript='=tipVolume;' Value='10' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Post-aspirate volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='0.3' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;74e9d6ec2462268e981d0ec1413d81db&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Number of times to loop' TaskParameterScript='=dispenseSteps;' Value='1' />
						<Parameter Category='' Name='Change tips every N times, N = ' Value='1' />
					</Parameters>
					<Variables />
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='6' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,++columnsDone]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='FinalPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='0' />
						<Parameter Category='Volume' Name='Volume' TaskParameterScript='=aliquotVolume;' Value='10' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_normal_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='0.5' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;74e9d6ec2462268e981d0ec1413d81db&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='8' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,reagentColumn+2]];
if(columns == columnsDone) {
	task.Performtiptouch = true;
	task.Whichsidestousefortiptouch = &quot;None&quot;;
	task.Tiptouchretractdistance = (columns &lt; 7) ? -7 : -14.5;
}' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReagentPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='1' />
						<Parameter Category='Volume' Name='Volume' Value='0' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_normal_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='15' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;74e9d6ec2462268e981d0ec1413d81db&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='Bravo::secondary::Tips Off' Task_Type='32' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='6' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,13-tipColumn-2]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='UsedTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Mark tips as used' Value='1' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;0b8d84050ee363651f67b97aaf6ce1f3&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;9&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Group End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Devices >
					<Device Device_Name='Bravo - 1' Location_Name='Default Location' />
				</Devices>
				<Parameters >
					<Parameter Name='Display confirmation' Value='Don&apos;t display' />
					<Parameter Name='2' Value='&lt;use default&gt;' />
					<Parameter Name='3' Value='&lt;use default&gt;' />
					<Parameter Name='4' Value='&lt;use default&gt;' />
					<Parameter Name='5' Value='&lt;use default&gt;' />
					<Parameter Name='6' Value='&lt;use default&gt;' />
					<Parameter Name='7' Value='&lt;use default&gt;' />
					<Parameter Name='8' Value='&lt;use default&gt;' />
					<Parameter Name='9' Value='&lt;use default&gt;' />
				</Parameters>
				<Dependencies />
			</Pipette_Process>
			<Pipette_Process Name='AliquotMix' >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Group Begin' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='BuiltIn::JavaScript' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='var aliquotVolume = reagentVolume;	// Volume to dispense per well
var maxTipVolume = MAX_VOLUME;	// Tip capacity
var columnsDone = 0;	// Number of columns dispensed so far
var deadVolume = 3;		// Extra liquid volume to aspirate

// Total volume to transfer:
var transferVolume = aliquotVolume * columns;
// The total volume of the largest number of aliquots that fit in one tip:
var maxVolume = aliquotVolume * Math.floor((maxTipVolume - deadVolume) / aliquotVolume);
// Number of aspirations necessary:
var aspirateSteps = Math.ceil(transferVolume / maxVolume);
' />
				</Task>
				<Task Name='Bravo::secondary::Set Head Mode' Task_Type='512' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Head mode' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;d4b0ccac7e9c488ef9b03e8cebe75927&apos; version=&apos;1.0&apos; &gt;
	&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Tips On' Task_Type='16' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='9' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,tipColumn]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReagentTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;8d004d0b695f93c5700523356cd877df&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Number of times to loop' TaskParameterScript='=aspirateSteps;' Value='1' />
						<Parameter Category='' Name='Change tips every N times, N = ' Value='1' />
					</Parameters>
					<Variables />
				</Task>
				<Task Name='BuiltIn::JavaScript' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='// Update volumes:
// Volume left to transfer:
var volumeLeft = (columns - columnsDone) * aliquotVolume;
// The actual volume to aspirate:
var tipVolume = (volumeLeft &gt; maxVolume) ? maxVolume + deadVolume : volumeLeft + deadVolume;
// The number of aliquots to dispense from the aspirated volume: 
var dispenseSteps = (tipVolume - deadVolume) / aliquotVolume;' />
				</Task>
				<Task Name='Bravo::secondary::Aspirate' Task_Type='1' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='12' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,reagentColumn]];
if(columns &lt; 7) task.Distancefromwellbottom = 0.5;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReagentPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' TaskParameterScript='=tipVolume;' Value='10' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Post-aspirate volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='0.3' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;74e9d6ec2462268e981d0ec1413d81db&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
					<Parameters >
						<Parameter Category='' Name='Number of times to loop' TaskParameterScript='=dispenseSteps;' Value='1' />
						<Parameter Category='' Name='Change tips every N times, N = ' Value='1' />
					</Parameters>
					<Variables />
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,++columnsDone]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReactionPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='0' />
						<Parameter Category='Volume' Name='Volume' TaskParameterScript='=aliquotVolume;' Value='10' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_normal_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='0.5' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;74e9d6ec2462268e981d0ec1413d81db&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='8' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,reagentColumn]];
if(columns == columnsDone) {
	task.Performtiptouch = true;
	task.Whichsidestousefortiptouch = &quot;None&quot;;
	task.Tiptouchretractdistance = (columns &lt; 7) ? -7 : -14.5;
}' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReagentPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='1' />
						<Parameter Category='Volume' Name='Volume' Value='0' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_normal_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='15' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;74e9d6ec2462268e981d0ec1413d81db&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Loop End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='Bravo::secondary::Tips Off' Task_Type='32' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='6' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,13-tipColumn]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='UsedTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Mark tips as used' Value='1' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;bd4e8d09bab445f455ea86ac51ea5100&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;1&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;1&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;11&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='1' RowCount='8' SubsetConfig='0' SubsetType='1' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Group End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Devices >
					<Device Device_Name='Bravo - 1' Location_Name='1' />
				</Devices>
				<Parameters >
					<Parameter Name='Display confirmation' Value='Don&apos;t display' />
					<Parameter Name='2' Value='&lt;use default&gt;' />
					<Parameter Name='3' Value='&lt;use default&gt;' />
					<Parameter Name='4' Value='&lt;use default&gt;' />
					<Parameter Name='5' Value='&lt;use default&gt;' />
					<Parameter Name='6' Value='&lt;use default&gt;' />
					<Parameter Name='7' Value='&lt;use default&gt;' />
					<Parameter Name='8' Value='&lt;use default&gt;' />
					<Parameter Name='9' Value='&lt;use default&gt;' />
				</Parameters>
				<Dependencies />
			</Pipette_Process>
			<Pipette_Process Name='ResetTemperature' >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Reserve Location' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='// Dummy task
task.skip();' />
					<Parameters >
						<Parameter Category='' Name='Location to use, plate' Value='ReactionPlate' />
						<Parameter Category='' Name='Location to use, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='' Name='Reservation time' Value='' />
					</Parameters>
				</Task>
				<Task Name='Bravo::secondary::Set temperature - Position' Task_Type='1024' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='2' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Temperature = tempRt;' />
					<Parameters >
						<Parameter Category='' Name='Location' Value='4' />
						<Parameter Category='' Name='Turn off temperature' Value='0' />
						<Parameter Category='' Name='Temperature' TaskParameterScript='=tempRt;' Value='' />
						<Parameter Category='' Name='Wait' Value='' />
						<Parameter Category='' Name='Temperature Tolerance' Value='1' />
						<Parameter Category='' Name='Timeout' Value='1' />
						<Parameter Category='' Name='Allow concurrent operation' Value='0' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='1' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Set temperature - Position' Task_Type='1024' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='2' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Temperature = tempRt;' />
					<Parameters >
						<Parameter Category='' Name='Location' Value='6' />
						<Parameter Category='' Name='Turn off temperature' Value='0' />
						<Parameter Category='' Name='Temperature' TaskParameterScript='=tempRt;' Value='' />
						<Parameter Category='' Name='Wait' Value='' />
						<Parameter Category='' Name='Temperature Tolerance' Value='1' />
						<Parameter Category='' Name='Timeout' Value='1' />
						<Parameter Category='' Name='Allow concurrent operation' Value='0' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='1' />
					</PipetteHead>
				</Task>
				<Devices >
					<Device Device_Name='Bravo - 1' Location_Name='1' />
				</Devices>
				<Parameters >
					<Parameter Name='Display confirmation' Value='Don&apos;t display' />
					<Parameter Name='2' Value='&lt;use default&gt;' />
					<Parameter Name='3' Value='&lt;use default&gt;' />
					<Parameter Name='4' Value='&lt;use default&gt;' />
					<Parameter Name='5' Value='&lt;use default&gt;' />
					<Parameter Name='6' Value='&lt;use default&gt;' />
					<Parameter Name='7' Value='&lt;use default&gt;' />
					<Parameter Name='8' Value='&lt;use default&gt;' />
					<Parameter Name='9' Value='&lt;use default&gt;' />
				</Parameters>
				<Dependencies />
			</Pipette_Process>
			<Pipette_Process Name='SetTemperature' >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Reserve Location' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='if(doOffDeckIncubation) task.skip();' />
					<Parameters >
						<Parameter Category='' Name='Location to use, plate' Value='ReactionPlate' />
						<Parameter Category='' Name='Location to use, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='' Name='Reservation time' Value='' />
					</Parameters>
				</Task>
				<Task Name='Bravo::secondary::Set temperature - Position' Task_Type='1024' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >1</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5.0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='/* To reach the reaction temperature faster 
this initial step is used to raise temperature quickly.
Once reached the temperature is immediately lowered to
the actual reaction temperature.
*/
if(doOffDeckIncubation) task.skip();
task.Temperature = 58;' />
					<Parameters >
						<Parameter Category='' Name='Location' Value='4' />
						<Parameter Category='' Name='Turn off temperature' Value='0' />
						<Parameter Category='' Name='Temperature' Value='58' />
						<Parameter Category='' Name='Wait' Value='1' />
						<Parameter Category='' Name='Temperature Tolerance' Value='1' />
						<Parameter Category='' Name='Timeout' Value='10' />
						<Parameter Category='' Name='Allow concurrent operation' Value='0' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='1' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Set temperature - Position' Task_Type='1024' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='87' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='if(doOffDeckIncubation) task.skip();
task.Temperature = incubationTemperature;' />
					<Parameters >
						<Parameter Category='' Name='Location' Value='4' />
						<Parameter Category='' Name='Turn off temperature' Value='0' />
						<Parameter Category='' Name='Temperature' TaskParameterScript='=incubationTemperature;' Value='' />
						<Parameter Category='' Name='Wait' Value='1' />
						<Parameter Category='' Name='Temperature Tolerance' Value='1' />
						<Parameter Category='' Name='Timeout' Value='10' />
						<Parameter Category='' Name='Allow concurrent operation' Value='0' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='1' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Move To Location' Task_Type='1024' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='2' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='if(!doOffDeckIncubation) task.skip();' />
					<Parameters >
						<Parameter Category='' Name='Location' Value='1' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='1' />
					</PipetteHead>
				</Task>
				<Devices >
					<Device Device_Name='Bravo - 1' Location_Name='Default Location' />
				</Devices>
				<Parameters >
					<Parameter Name='Display confirmation' Value='Don&apos;t display' />
					<Parameter Name='2' Value='&lt;use default&gt;' />
					<Parameter Name='3' Value='&lt;use default&gt;' />
					<Parameter Name='4' Value='&lt;use default&gt;' />
					<Parameter Name='5' Value='&lt;use default&gt;' />
					<Parameter Name='6' Value='&lt;use default&gt;' />
					<Parameter Name='7' Value='&lt;use default&gt;' />
					<Parameter Name='8' Value='&lt;use default&gt;' />
					<Parameter Name='9' Value='&lt;use default&gt;' />
				</Parameters>
				<Dependencies />
			</Pipette_Process>
			<Pipette_Process Name='TransferBuffer' >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Group Begin' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='Bravo::secondary::Set Head Mode' Task_Type='512' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Headmode = headMode;' />
					<Parameters >
						<Parameter Category='' Name='Head mode' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;5929d18748dd2bd11633d3faafa655d1&apos; version=&apos;1.0&apos; &gt;
	&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Tips On' Task_Type='16' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='9' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,13-columns]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='SampleTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;b37e670787c8474f935b41a6ceb5f9f6&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Aspirate' Task_Type='1' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Volume = PRE_ASP_SMALL;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReactionPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Post-aspirate volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_normal_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='30' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Aspirate' Task_Type='1' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='20' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Volume = sampleVolume + adapterVolume + reagentVolume;
task.Distancefromwellbottom = 0.5;
task.Dynamictipextension = global.dph(sampleVolume + adapterVolume + reagentVolume, 0.5);' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReactionPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Post-aspirate volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_small_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='9' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Volume = sampleVolume + adapterVolume + reagentVolume;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='FinalPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='0' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='3' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Mix [Dual Height]' Task_Type='4096' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='18' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='var mix_vol = 0.7 * (sampleVolume + adapterVolume + reagentVolume + bufferVolume);
if(mix_vol &gt; MAX_MIX_VOLUME) {
	mix_vol = MAX_MIX_VOLUME;
}
task.Volume = mix_vol;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='FinalPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_mixing' />
						<Parameter Category='Properties' Name='Mix cycles' Value='5' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Distance From Well Bottom' Name='Aspirate distance' Value='0.75' />
						<Parameter Category='Distance From Well Bottom' Name='Dispense at different distance' Value='0' />
						<Parameter Category='Distance From Well Bottom' Name='Dispense distance' Value='4' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='South/North' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='2' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='12' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='// Blowout
task.Volume = PRE_ASP_SMALL;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='FinalPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='0' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_blowout' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='8' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='1' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='-7' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Tips Off' Task_Type='32' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='6' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,13-columns]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='SampleTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Mark tips as used' Value='1' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;b37e670787c8474f935b41a6ceb5f9f6&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Group End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Devices >
					<Device Device_Name='Bravo - 1' Location_Name='1' />
				</Devices>
				<Parameters >
					<Parameter Name='Display confirmation' Value='Don&apos;t display' />
					<Parameter Name='2' Value='&lt;use default&gt;' />
					<Parameter Name='3' Value='&lt;use default&gt;' />
					<Parameter Name='4' Value='&lt;use default&gt;' />
					<Parameter Name='5' Value='&lt;use default&gt;' />
					<Parameter Name='6' Value='&lt;use default&gt;' />
					<Parameter Name='7' Value='&lt;use default&gt;' />
					<Parameter Name='8' Value='&lt;use default&gt;' />
					<Parameter Name='9' Value='&lt;use default&gt;' />
				</Parameters>
				<Dependencies />
			</Pipette_Process>
			<Pipette_Process Name='TransferSample' >
				<Minimized >0</Minimized>
				<Task Name='BuiltIn::Group Begin' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Task Name='Bravo::secondary::Set Head Mode' Task_Type='512' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='0' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Headmode = headMode;' />
					<Parameters >
						<Parameter Category='' Name='Head mode' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;5929d18748dd2bd11633d3faafa655d1&apos; version=&apos;1.0&apos; &gt;
	&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Tips On' Task_Type='16' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='8' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,13-columns]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='SampleTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;b37e670787c8474f935b41a6ceb5f9f6&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Aspirate' Task_Type='1' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='5' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Volume = PRE_ASP_SMALL;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='SamplePlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Post-aspirate volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_normal_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='30' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Aspirate' Task_Type='1' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='16' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Volume = sampleVolume;
task.Distancefromwellbottom = 0.5;
task.Dynamictipextension = global.dph(sampleVolume, 0.5);' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='SamplePlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Post-aspirate volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_small_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='8' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Volume = sampleVolume;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='TransferPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='0' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='3' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Mix [Dual Height]' Task_Type='4096' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='16' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='var mix_vol = 0.8 * (sampleVolume + adapterVolume);
if(mix_vol &gt; MAX_MIX_VOLUME) {
	mix_vol = MAX_MIX_VOLUME;
}
task.Volume = mix_vol;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='TransferPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_mixing' />
						<Parameter Category='Properties' Name='Mix cycles' Value='5' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Distance From Well Bottom' Name='Aspirate distance' Value='1' />
						<Parameter Category='Distance From Well Bottom' Name='Dispense at different distance' Value='0' />
						<Parameter Category='Distance From Well Bottom' Name='Dispense distance' Value='4' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='South/North' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='2' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Aspirate' Task_Type='1' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='16' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Volume = sampleVolume + adapterVolume;
task.Distancefromwellbottom = 0.5;
task.Dynamictipextension = global.dph(sampleVolume + adapterVolume, 0.5);' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='TransferPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Post-aspirate volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_small_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='8' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Volume = sampleVolume + adapterVolume;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReactionPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='0' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_large_vol' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='1' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='0' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Mix [Dual Height]' Task_Type='4096' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='20' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='var mix_vol = 0.8 * (sampleVolume + reagentVolume + adapterVolume);
if(mix_vol &gt; MAX_MIX_VOLUME) {
	mix_vol = MAX_MIX_VOLUME;
}
task.Volume = mix_vol;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReactionPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Pre-aspirate volume' Value='0' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_slow_mixing' />
						<Parameter Category='Properties' Name='Mix cycles' Value='5' />
						<Parameter Category='Properties' Name='Dynamic tip extension' Value='0' />
						<Parameter Category='Distance From Well Bottom' Name='Aspirate distance' Value='0.75' />
						<Parameter Category='Distance From Well Bottom' Name='Dispense at different distance' Value='1' />
						<Parameter Category='Distance From Well Bottom' Name='Dispense distance' Value='4' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='0' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='South/North' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='2' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Dispense' Task_Type='2' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='11' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='// Blowout
task.Volume = PRE_ASP_SMALL;' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='ReactionPlate' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Volume' Name='Empty tips' Value='0' />
						<Parameter Category='Volume' Name='Volume' Value='' />
						<Parameter Category='Volume' Name='Blowout volume' Value='0' />
						<Parameter Category='Properties' Name='Liquid class' Value='j_blowout' />
						<Parameter Category='Properties' Name='Distance from well bottom' Value='8' />
						<Parameter Category='Properties' Name='Dynamic tip retraction' Value='0' />
						<Parameter Category='Tip Touch' Name='Perform tip touch' Value='1' />
						<Parameter Category='Tip Touch' Name='Which sides to use for tip touch' Value='None' />
						<Parameter Category='Tip Touch' Name='Tip touch retract distance' Value='-7' />
						<Parameter Category='Tip Touch' Name='Tip touch horizontal offset' Value='0' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;6d9e778ac7f7235a77c7705582d38a22&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;0&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
						<Parameter Category='Properties' Name='Pipette technique' Value='' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='Bravo::secondary::Tips Off' Task_Type='32' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings >
						<Setting Name='Estimated time' Value='6' />
					</Advanced_Settings>
					<TaskScript Name='TaskScript' Value='task.Wellselection = [[1,13-columns]];' />
					<Parameters >
						<Parameter Category='' Name='Location, plate' Value='SampleTips' />
						<Parameter Category='' Name='Location, location' Value='&lt;auto-select&gt;' />
						<Parameter Category='Properties' Name='Allow automatic tracking of tip usage' Value='0' />
						<Parameter Category='Properties' Name='Mark tips as used' Value='1' />
						<Parameter Category='Properties' Name='Well selection' Value='&lt;?xml version=&apos;1.0&apos; encoding=&apos;ASCII&apos; ?&gt;
&lt;Velocity11 file=&apos;MetaData&apos; md5sum=&apos;b37e670787c8474f935b41a6ceb5f9f6&apos; version=&apos;1.0&apos; &gt;
	&lt;WellSelection CanBe16QuadrantPattern=&apos;0&apos; CanBeLinked=&apos;0&apos; CanBeQuadrantPattern=&apos;0&apos; IsLinked=&apos;0&apos; IsQuadrantPattern=&apos;0&apos; OnlyOneSelection=&apos;1&apos; OverwriteHeadMode=&apos;0&apos; QuadrantPattern=&apos;0&apos; StartingQuadrant=&apos;1&apos; &gt;
		&lt;PipetteHeadMode Channels=&apos;0&apos; ColumnCount=&apos;12&apos; RowCount=&apos;8&apos; SubsetConfig=&apos;0&apos; SubsetType=&apos;0&apos; TipType=&apos;0&apos; /&gt;
		&lt;Wells &gt;
			&lt;Well Column=&apos;0&apos; Row=&apos;0&apos; /&gt;
		&lt;/Wells&gt;
	&lt;/WellSelection&gt;
&lt;/Velocity11&gt;' />
					</Parameters>
					<PipetteHead AssayMap='0' Disposable='1' HasTips='1' MaxRange='251' MinRange='-41' Name='96LT, 200 無 Series III' >
						<PipetteHeadMode Channels='0' ColumnCount='12' RowCount='8' SubsetConfig='0' SubsetType='0' TipType='0' />
					</PipetteHead>
				</Task>
				<Task Name='BuiltIn::Group End' >
					<Enable_Backup >0</Enable_Backup>
					<Task_Disabled >0</Task_Disabled>
					<Has_Breakpoint >0</Has_Breakpoint>
					<Advanced_Settings />
					<TaskScript Name='TaskScript' Value='' />
				</Task>
				<Devices >
					<Device Device_Name='Bravo - 1' Location_Name='1' />
				</Devices>
				<Parameters >
					<Parameter Name='Display confirmation' Value='Don&apos;t display' />
					<Parameter Name='2' Value='&lt;use default&gt;' />
					<Parameter Name='3' Value='&lt;use default&gt;' />
					<Parameter Name='4' Value='&lt;use default&gt;' />
					<Parameter Name='5' Value='&lt;use default&gt;' />
					<Parameter Name='6' Value='&lt;use default&gt;' />
					<Parameter Name='7' Value='&lt;use default&gt;' />
					<Parameter Name='8' Value='&lt;use default&gt;' />
					<Parameter Name='9' Value='&lt;use default&gt;' />
				</Parameters>
				<Dependencies />
			</Pipette_Process>
		</Main_Processes>
	</Processes>
</Velocity11>