Isaac ROS DNN Inference

Overview

This repository provides two NVIDIA GPU-accelerated ROS2 nodes that perform deep learning inference using custom models. One node uses the TensorRT SDK, while the other uses the Triton SDK.

TensorRT is a library that enables faster inference on NVIDIA GPUs; it provides an API for the user to load and execute inference with their own models. The TensorRT ROS2 node in this package integrates this TensorRT API directly, so there is no need to make any calls to or directly use TensorRT SDK. Instead, users simply configure the TensorRT node with their own custom models and parameters, and the node will make the necessary TensorRT API calls to load and execute the model. For further documentation on TensorRT, refer to their main page here.

Triton is a framework that brings up a generic inference server that a user can configure with a model repository, which is a collection of various types of models (e.g.) ONNX Runtime, TensorRT Engine Plan, TensorFlow, PyTorch). A brief tutorial on how to set up a model repository is included below, and further documentation on Triton is also available at the Triton GitHub.

The decision between TensorRT and Triton is ultimately up to user preference. Since TensorRT has fewer configuration steps (i.e. it does not require a model repository), generally you can get started faster with TensorRT. However, the TensorRT node only supports ONNX and TensorRT Engine Plans, while the Triton node supports a wider variety of model types. In terms of performance and inference speed, they are both comparable in our benchmarks.

The user configures either node to load a specified model or (in the case of the Triton SDK) model repository. The nodes expect as input a ROS2 TensorList message and publish the inference result as a ROS2 TensorList message. The definiton of the TensorList message (and the Tensor message contained within it) is specified under isaac_ros_common/isaac_ros_nvengine_interfaces/msg. Users are expected to run their own models, which they have trained (and converted to a compatible model format such as ONNX), or downloaded from NGC (in ETLT format), and converted to a TensorRT Engine File using the TAO converter tool. When running the TensorRT node, it is generally a better practice to first convert your custom model into a TensorRT Engine Plan file using the TAO converter before running inference. If an ONNX model is directly provided, the TensorRT node will convert it to a TensorRT Engine Plan file first before running inference, which will extend the initial setup time of the node.

Native model support is provided as a separate ROS packages with nodes that can accept an input image message and output a tensor message result. The following packages provide additional native model support with useful walkthroughs and documentation on how to use them.

isaac_ros_dope: Deep Object Pose Estimation (DOPE) for 3D object pose estimation
isaac_ros_unet: U-Net for semantic image segmentation

Both nodes will require a pre-processor (encoder) and post-processor (decoder) node. A pre-processor node should take a ROS2 message, perform the pre-processing steps dictated by the model, and then convert it to a ROS2 TensorList message. For example, a pre-processor node could resize an image, normalize the image, and then perform the message conversion. On the other hand, a post-processor node should be used to convert the output of the model inference into a usable form. For example, a post-processor node may perform argmax to identify the class label from a classification problem. The specific functionality of these two nodes are application-specific.

This has been tested on ROS2 (Foxy) and should build and run on x86_64 and aarch64 (Jetson).

For more documentation on TensorRT, see here. Note that the TensorRT node integrates the TensorRT API directly, so there is no need to make any calls or direct usage of TensorRT SDK.

For more documentation on Triton, see here.

System Requirements

This Isaac ROS package is designed and tested to be compatible with ROS2 Foxy on Jetson hardware, in addition to on x86 systems with an Nvidia GPU. On x86 systems, packages are only supported when run in the provided Isaac ROS Dev Docker container.

Jetson

AGX Xavier or Xavier NX
JetPack 4.6

x86_64 (in Isaac ROS Dev Docker Container)

CUDA 11.1+ supported discrete GPU
VPI 1.1.11
Ubuntu 20.04+

Note: For best performance on Jetson, ensure that power settings are configured appropriately (Power Management for Jetson).

Docker

You need to use the Isaac ROS development Docker image from Isaac ROS Common, based on the version 21.08 image from Deep Learning Frameworks Containers.

You must first install the NVIDIA Container Toolkit to make use of the Docker container development/runtime environment.

Configure nvidia-container-runtime as the default runtime for Docker by editing /etc/docker/daemon.json to include the following:

    "runtimes": {
        "nvidia": {
            "path": "nvidia-container-runtime",
            "runtimeArgs": []
        }
    },
    "default-runtime": "nvidia"

and then restarting Docker: sudo systemctl daemon-reload && sudo systemctl restart docker

Run the following script in isaac_ros_common to build the image and launch the container on x86_64 or Jetson:

$ scripts/run_dev.sh <optional_path>

Dependencies

isaac_ros_common
isaac_ros_nvengine
isaac_ros_nvengine_interfaces

Setup

Create a ROS2 workspace if one is not already prepared:
```
mkdir -p your_ws/src
```
Note: The workspace can have any name; this guide assumes you name it your_ws.
Clone the Isaac ROS DNN Inference and Isaac ROS Common package repositories to your_ws/src/isaac_ros_dnn_inference. Check that you have Git LFS installed before cloning to pull down all large files:
```
sudo apt-get install git-lfs

cd your_ws/src   
git clone https://github.com/NVIDIA-ISAAC-ROS/isaac_ros_dnn_inference
git clone https://github.com/NVIDIA-ISAAC-ROS/isaac_ros_common
```
Start the Docker interactive workspace:
```
isaac_ros_common/scripts/run_dev.sh your_ws
```
After this command, you will be inside of the container at /workspaces/isaac_ros-dev. Running this command in different terminals will attach to the same container.

Note: The rest of this README assumes that you are inside this container.
Build and source the workspace:
```
cd /workspaces/isaac_ros-dev
colcon build && . install/setup.bash
```
Note: We recommend rebuilding the workspace each time when source files are edited. To rebuild, first clean the workspace by running rm -r build install log.
(Optional) Run tests to verify complete and correct installation:
```
colcon test --executor sequential
```

DNN Models

TensorRT and Triton DNN inference can work with both custom AI models and pre-trained models from the TAO Toolkit hosted on NVIDIA GPU Cloud (NGC). NVIDIA Train, Adapt, and Optimize (TAO) is an AI-model-adaptation platform that simplifies and accelerates the creation of enterprise AI applications and services.

Pre-trained Models on NGC

TAO Toolkit provides NVIDIA pre-trained models for Computer Vision (CV) and Conversational AI applications. More details about pre-trained models are available here. You should be able to leverage these models for inference with the TensorRT and Triton nodes by following steps similar to the ones discussed below.

Download Pre-trained Encrypted TLT Model (.etlt) from NGC

The following steps show how to download models, using PeopleSemSegnet as an example.

From File Browser on the PeopleSemSegnet page, select the model .etlt file in the FILE list. Copy the wget command by clicking ... in the ACTIONS column.

Run the copied command in a terminal to download the ETLT model, as shown in the below example:

wget https://api.ngc.nvidia.com/v2/models/nvidia/tao/peoplesemsegnet/versions/deployable_v1.0/files/peoplesemsegnet.etlt

Convert the Encrypted TLT Model (.etlt) Format to the TensorRT Engine Plan

tao-converter is used to convert encrypted pre-trained models (.etlt) to the TensorRT Engine Plan.
The pre-built tao-converter can be downloaded here.

tao-converter is also included in the ISAAC-ROS docker container:

Platform	Compute library	Directory inside docker
x86_64	CUDA 11.3 / cuDNN 8.1 / TensorRT 8.0	`/opt/nvidia/tao/cuda11.3-trt8.0`
Jetson(aarch64)	Library from Jetpack 4.6	`/opt/nvidia/tao/jp4.6`

A symbolic link (/opt/nvidia/tao/tao-converter) is created to use tao-converter across different platforms.
Tip: Use tao-converter -h for more information on using the tool.

Here are some examples for generating the TensorRT engine file using tao-converter:

Generate an engine file for the fp16 data type:
```
mkdir -p /workspaces/isaac_ros-dev/models
/opt/nvidia/tao/tao-converter -k tlt_encode -d 3,544,960 -p input_1,1x3x544x960,1x3x544x960,1x3x544x960 -t fp16 -e /workspaces/isaac_ros-dev/models/peoplesemsegnet.engine -o softmax_1 peoplesemsegnet.etlt
```
Note: The information used above, such as the model load key and input dimension, can be retrieved from the PeopleSemSegnet page under the Overview tab. The model input node name and output node name can be found in peoplesemsegnet_int8.txt from File Browser. The output file is specified using the -e option. The tool needs write permission to the output directory.

Generate an engine file for the data type int8:

mkdir -p /workspaces/isaac_ros-dev/models
cd /workspaces/isaac_ros-dev/models

# Downloading calibration cache file for Int8.  Check model's webpage for updated wget command.
wget https://api.ngc.nvidia.com/v2/models/nvidia/tao/peoplesemsegnet/versions/deployable_v1.0/files/peoplesemsegnet_int8.txt

# Running tao-converter
/opt/nvidia/tao/tao-converter -k tlt_encode -d 3,544,960 -p input_1,1x3x544x960,1x3x544x960,1x3x544x960 -t int8 -c peoplesemsegnet_int8.txt -e /workspaces/isaac_ros-dev/models/peoplesemsegnet.engine -o softmax_1 peoplesemsegnet.etlt

Note: The calibration cache file (specified using the -c option) is required to generate the int8 engine file. For the PeopleSemSegNet model, it is provided in the File Browser tab.

Custom AI Models

Custom user models or models re-trained through TAO Toolkit can be used with TensorRT and Triton DNN inference with additional configuration and encoder/decoder implementations. U-Net models are natively supported, but other model architectures can also be supported with additional work. You can implement nodes that transform and pre-process data into a TensorList msg (some common encoders are provided in isaac_ros_dnn_encoders) and translate the predicted TensorLists back into semantic messages for your graph (for example, a decoder that produces bounding boxes or image masks). To configure a custom model, you will need to specify the input and output bindings of the expected tensors to TensorRT or Triton nodes through parameters.

Triton Inference

Setup Triton Model Repository

There are example models for using the ONNX Runtime backend at /workspaces/isaac_ros-dev/src/isaac_ros_dnn_inference/test/models/mobilenetv2-1.0_triton_onnx and TensorFlow backend at /workspaces/isaac_ros-dev/src/isaac_ros_dnn_inference/test/models/simple_triton_tf.

Here is an example of using the TensorRT backend, which uses the PeopleSemSegnet engine file generated from the TAO-Converter section as the model:

Create a models repository:
```
mkdir -p /tmp/models/peoplesemsegnet
```
Create a models repository for a version(e.g. 1):
```
mkdir -p /tmp/models/peoplesemsegnet/1
```
Note that this version should match the model_version parameter for the Triton node.

Copy the generated engine file to the model repository and rename it as model.plan:

cp /workspaces/isaac_ros-dev/models/peoplesemsegnet.engine /tmp/models/peoplesemsegnet/1/model.plan

Create a configuration file for this model at path /tmp/models/peoplesemsegnet/config.pbtxt. Note that name has to be the same as the model repository.

name: "peoplesemsegnet"
platform: "tensorrt_plan"
max_batch_size: 0
input [
  {
    name: "input_1"
    data_type: TYPE_FP32
    dims: [ 1, 3, 544, 960 ]
  }
]
output [
  {
    name: "softmax_1"
    data_type: TYPE_FP32
    dims: [ 1, 544, 960, 2 ]
  }
]
version_policy: {
  specific {
    versions: [ 1 ]
  }
}

Launch Triton Node

Build isaac_ros_triton package:

cd /workspaces/isaac_ros-dev
colcon build --packages-up-to isaac_ros_triton && . install/setup.bash

The example launch file at src/isaac_ros_dnn_inference/isaac_ros_triton/launch/isaac_ros_triton.py loads and runs the mobilenetv2-1.0 model:
```
ros2 launch src/isaac_ros_dnn_inference/isaac_ros_triton/launch/isaac_ros_triton.py
```
Now the Triton node is set up and running. It listens to the topic /tensor_pub and publishes to the topic /tensor_sub.
In a separate terminal, spin up a node that sends tensors to the Triton node:
```
your_ws/src/isaac_ros_common/scripts/run_dev.sh your_ws
. install/setup.bash
ros2 run isaac_ros_dnn_inference_test run_test_publisher
```
This test executable is configured to send random tensors with corresponding dimensions to the /tensor_pub topic.
View the output tensors from the Triton node, which should match the output dimensions of mobilenet:
```
ros2 topic echo /tensor_sub
```
Note: that the received tensor has the dimension [1, 1000], while the tensor printed out has a length of 4000 because the the data type being sent is float32, while the tensor data buffer is specified as uint8. This means that each float32 term corresponds to 4 uint8 terms.

TensorRT Inference

Setup ONNX file or TensorRT Engine Plan

TensorRT inference supports a model in either ONNX format or as a TensorRT Engine Plan. Therefore, in order to run inference using the TensorRT node, either convert your model into ONNX format, or convert it into a Engine Plan file for your hardware platform. An example for converting .etlt formatted models from NGC is shown above in the DNN Models section of the README.
The example model mobilenetv2-1.0 will be used by default when using the provided launch file. To use a custom model ONNX or TensorRT Engine file, copy your ONNX or generated plan file into a known location on your filesystem: cp mobilenetv2-1.0.onnx /tmp/model.onnx or cp model.plan /tmp/model.plan.

Run TensorRT Node

Build the isaac_ros_tensor_rt package:

cd /workspaces/isaac_ros-dev
colcon build --packages-up-to isaac_ros_tensor_rt && . install/setup.bash

Start the TensorRT node (the default example ONNX model is mobilenetv2-1.0):

  ros2 launch src/isaac_ros_dnn_inference/isaac_ros_tensor_rt/launch/isaac_ros_tensor_rt.py

Note: If using an ONNX model file, TensorRT node will first generate a TensorRT engine plan file before running inference. The engine_file_path is the location where the TensorRT engine plan file is generated. By default it is set to /tmp/trt_engine.plan.

Note: Generating a TensorRT Engine Plan file takes time initially and it will affect your performance measures. We recommend pre-generating the engine plan file for production use.

Start the TensorRT node (with a custom ONNX model):

To launch the TensorRT node using a custom model ONNX file, update the following node parameters in the launch file:
```
'model_file_path': '<path-to-custom-ONNX-file>'
```
This will generate a TensorRT Engine Plan at /tmp/trt_engine.plan and then run inference on that model. The user can also specify in the node parameters an engine_file_path to generate the TensorRT Engine Plan in different location.
Start the TensorRT Node (with a custom TensorRT Engine Plan):

If using a TensorRT Engine Plan file to run inference, the model_file_path will not be used, so an ONNX file does not need to be provided. Instead inference will be run using the plan file provided by the parameter engine_file_path.

To launch the TensorRT node using a custom TensorRT Engine Plan file, update the following node parameters in the launch file:
```
'engine_file_path': '<path-to-custom-trt-plan-file>',
'force_engine_update': False
```
By setting force_engine_update to false, the TensorRT node will first attempt to run inference using the provided TensorRT Engine Plan file provided by the engine_file_path parameter. If it fails to read the engine plan file, it will attempt to generate a new plan file using the ONNX file specified in model_file_path. Normally, this means the node will simply fail and exit the program since the default model_file_path is a placeholder value of model.onnx, which presumably does not point to any existing ONNX file. However, if the user happens to specify a valid ONNX file (i.e. the file exists on the filesystem), then that file will be used to generate the engine plan and run inference. Therefore, it is important to not specify any model_file_path when running with a custom TensorRT Engine Plan file.

Once the TensorRT node is set up, it listens to the topic /tensor_pub and publishes results to the topic /tensor_sub.
In a separate terminal, spin up a node that sends tensors to the TensorRT Node:
```
your_ws/src/isaac_ros_common/scripts/run_dev.sh your_ws
. install/setup.bash
ros2 run isaac_ros_dnn_inference_test run_test_publisher
```
This test executable is configured to send random tensors with corresponding dimensions to the /tensor_pub topic.
View the output tensors from the TensorRT node, which should match the output dimensions of mobilenet:
```
ros2 topic echo /tensor_sub
```
Note that the received tensor has the dimension [1, 1000] while the tensor printed out has a length of 4000 because the the data type being sent is float32 while the tensor data buffer is specified as uint8. This means that each float32 term corresponds to 4 uint8 terms.

Package Reference

`isaac_ros_tensor_rt`

Overview

The isaac_ros_tensor_rt package offers functionality to run inference on any TensorRT compatible model. It directly integrates the TensorRT API and thus does not require the user to develop any additional code to use the TensorRT SDK. You only need to provide a model in ONNX or TensorRT Engine Plan format to the TensorRT node through node options, and then launch the node to run inference. The launched node will run continously and process in real-time any incoming tensors published to it.

Available Components

Component	Topics Subscribed	Topics Published	Parameters
`TensorRTNode`	`/tensor_pub`: The input tensor stream	`/tensor_sub`: The tensor list of output tensors from the model inference	`model_file_path`: The absolute path to your model file in the local file system (the model file must be `.onnx`) `engine_file_path`: The absolute path to either where you want your TensorRT engine plan to be generated (from your model file) or where your pre-generated engine plan file is located `force_engine_update`: If set to `true`, the node will always try to generate a TensorRT engine plan from your model file and needs to be set to false to use the pre-generated TensorRT engine plan. This parameter is set to `true` by default. `input_tensor_names`: A list of tensor names to be bound to specified input bindings names. Bindings occur in sequential order, so the first name here will be mapped to the first name in `input_binding_names`. `input_binding_names`: A list of input tensor binding names specified by model `output_tensor_names`: A list of tensor names to be bound to specified output binding names `output_binding_names`: A list of output tensor binding names specified by model `verbose`: If set to `true`, the node will enable verbose logging to console from the internal TensorRT execution. This parameter is set to `true` by default. `max_workspace_size`: The size of the working space in bytes. The default value is 64MB `dla_core`: The DLA Core to use. Fallback to GPU is always enabled. The default setting is GPU only. `max_batch_size`: The maximum possible batch size in case the first dimension is dynamic and used as the batch size `enable_fp16`: Enables building a TensorRT engine plan file which uses FP16 precision for inference. If this setting is `false`, the plan file will use FP32 precision. This setting is `true` by default `relaxed_dimension_check`: Ignores dimensions of 1 for the input-tensor dimension check.

`isaac_ros_triton`

Overview

The isaac_ros_triton package offers functionality to run inference through a native Triton Inference Server. It allows multiple backends (e.g. Tensorflow, PyTorch, TensorRT) and model types. Model repositories and model configuration files need to be set up following the Triton server instructions.

Available Components

Component	Topics Subscribed	Topics Published	Parameters
`TritonNode`	`/tensor_pub`: The input tensor stream	`/tensor_sub`: The tensor list of output tensors from the model inference	`storage_type`: The tensor allocation storage type for `RosBridgeTensorSubscriber`. The default value is `1`. `model_repository_paths`: The absolute paths to your model repositories in your local file system (repositories structure should follow Triton requirements). `model_name`: The name of your model. Under `model_repository_paths`, there should be a directory with this name, and it should align with the model name in the model configuration under this directory. `max_batch_size`: The maximum batch size allowed for the model. It should align with the model configuration. The default value is `8`. `num_concurrent_requests`: The number of requests the Triton server can take at a time. This should be set according to the tensor publisher frequency. The default value is `65535`. `input_tensor_names`: A list of tensor names to be bound to specified input bindings names. Bindings occur in sequential order, so the first name here will be mapped to the first name in `input_binding_names`. `input_binding_names`: A list of input tensor binding names specified by model. `output_tensor_names`: A list of tensor names to be bound to specified output binding names. `output_binding_names`: A list of output tensor binding names specified by model.

`isaac_ros_dnn_encoders`

Overview

The isaac_ros_dnn_encoders package offers functionality for encoding ROS2 messages into ROS2 Tensor messages, including the ability to resize and normalize the tensor before outputting it. Currently, this package only supports ROS2 Image messages. The tensor output will be a NCHW tensor, where N is the number of batches (this will be 1 since this package targets inference), C is the number of color channels of the image, H is height of the image, and W is the width of the image. Therefore, a neural network that uses this package for preprocessing should support NCHW inputs.

Using `isaac_ros_dnn_encoders`

This package is not meant to be a standalone package, but serves as a preprocessing step before sending data to TensorRT or Triton. Ensure that the preprocessing steps of your desired network match the preprocessing steps performed by this node. This node is capable of image color space conversion, image resizing and image normalization. To use this node, simply add it to a launch file for your pipeline. The isaac_ros_unet package contains samples.

Available Components

Component	Topics Subscribed	Topics Published	Parameters
`DnnImageEncoderNode`	`image`: The image that should be encoded into a tensor	`encoded_tensor`: The resultant tensor after converting the `image`	`network_image_width`: The image width that the network expects. This will be used to resize the input `image` width. The default value is `224`. `network_image_height`: The image height that the network expects. This will be used to resize the input `image` height. The default value is `224`. `network_image_encoding`: The image encoding that the network expects. This will be used to convert the color space of the `image`. This should be either `rgb8` (default), `bgr8`, or `mono8`. `maintain_aspect_ratio`: A flag for the encoder to crop the input image to get the aspect ratio of `network_image_width` and `network_image_height` before resizing. The default value is set to `False`. `center_crop`: A flag for the encoder to crop the center of the image if `maintain_aspect_ratio` is set to `True`. The default value is set to `False`. `tensor_name`: The name of the input tensor, which is `input` by default. `network_normalization_type`: The type of network normalization that should be performed on the network. This can be either `none` for no normalization, `unit_scaling` for normalization between 0 to 1, `positive_negative` for normalization between -1 to 1, and `image_normalization` for performing this normalization: `(image / 255 - mean) / standard_deviation` The default value is `unit_scaling`. `image_mean`: If `network_normalization_type` is set to `image_normalization`, the mean of the images per channel will be used for this normalization process, which is `[0.5, 0.5, 0.5]` by default. `image_stddev`: If `network_normalization_type` is set to `image_normalization`, the standard deviation of the images per channel will be used for this normalization process, which is `[0.5, 0.5, 0.5]` by default.

Note: For best results, crop/resize input images to the same dimensions your DNN model is expecting. DnnImageEncoderNode will skew the aspect ratio of input images to the target dimensions.

Walkthroughs

Inference on PeopleSemSegnet using Triton

This walkthrough will run inference on the PeopleSemSegnet from NGC using Triton.

Obtain the PeopleSemSegnet ETLT file. The input dimension should be NCHW and the output dimension should be NHWC that has gone through an activation layer (e.g. softmax). The PeopleSemSegnet model follows this criteria.

# Create a model repository for version 1
mkdir -p /tmp/models/peoplesemsegnet/1

# Download the model
cd /tmp/models/peoplesemsegnet
wget https://api.ngc.nvidia.com/v2/models/nvidia/tao/peoplesemsegnet/versions/deployable_v1.0/files/peoplesemsegnet.etlt

Convert the .etlt file to a TensorRT plan file (which defaults to fp32).

/opt/nvidia/tao/tao-converter -k tlt_encode -d 3,544,960 -p input_1,1x3x544x960,1x3x544x960,1x3x544x960 -e /tmp/models/peoplesemsegnet/1/model.plan -o softmax_1 peoplesemsegnet.etlt

Note: The TensorRT plan file should be named model.plan.

Clone Isaac ROS Image Segmentation repository into your workspace to make available the isaac_ros_unet package.

cd /workspaces/isaac_ros-dev/src
git clone https://github.com/NVIDIA-ISAAC-ROS/isaac_ros_image_segmentation

Create file /tmp/models/peoplesemsegnet/config.pbtxt with the following content:

name: "peoplesemsegnet"
platform: "tensorrt_plan"
max_batch_size: 0
input [
  {
    name: "input_1"
    data_type: TYPE_FP32
    dims: [ 1, 3, 544, 960 ]
  }
]
output [
  {
    name: "softmax_1"
    data_type: TYPE_FP32
    dims: [ 1, 544, 960, 2 ]
  }
]
version_policy: {
  specific {
    versions: [ 1 ]
  }
}

Modify the isaac_ros_unet launch file located in /workspaces/isaac_ros-dev/src/isaac_ros_image_segmentation/isaac_ros_unet/launch/isaac_ros_unet_triton.launch.py. You will need to update the following lines as:
```
'model_name': 'peoplesemsegnet',
'model_repository_paths': ['/tmp/models'],
```
The rest of the parameters are already set for PeopleSemSegnet. If you are using a custom model, these parameters will also need to be modified.

Rebuild and source isaac_ros_unet:

cd /workspaces/isaac_ros-dev
colcon build --packages-up-to isaac_ros_unet && . install/setup.bash

Start isaac_ros_unet using the launch file:

ros2 launch isaac_ros_unet isaac_ros_unet_triton.launch.py

Setup image_publisher package if not already installed.

cd /workspaces/isaac_ros-dev/src 
git clone --single-branch -b ros2 https://github.com/ros-perception/image_pipeline.git
cd /workspaces/isaac_ros-dev
colcon build --packages-up-to image_publisher && . install/setup.bash

In a separate terminal, publish an image to /image using image_publisher. For testing purposes, we recommend using PeopleSemSegnet sample image, which is located here.

ros2 run image_publisher image_publisher_node /workspaces/isaac_ros-dev/src/isaac_ros_image_segmentation/isaac_ros_unet/test/test_cases/unet_sample/image.jpg --ros-args -r image_raw:=image

In another terminal, launch rqt_image_viewer as follows:

ros2 run rqt_image_view rqt_image_view

Inside the rqt_image_view GUI, change the topic to /unet/colored_segmentation_mask to view a colorized segmentation mask. You may also view the raw segmentation, which is published to /unet/raw_segmentation_mask, where the raw pixels correspond to the class labels making it unsuitable for human visual inspection.

These steps can easily be adapted to using TensorRT by referring to the TensorRT inference section and modifying step 4-5.

Note: For best results, crop/resize input images to the same dimensions your DNN model is expecting.

If you are interested in using a custom model of the U-Net architecture, please read the analogous steps for configuring DOPE.

To configure the launch file for your specific model, consult earlier documentation that describes each of these parameters. Once again, remember to verify that the preprocessing and postprocessing supported by the nodes fit your models. For example, the model should expect a NCHW formatted tensor, and output a NHWC tensor that has gone through a activation layer (e.g. softmax).

Troubleshooting

Nodes crashed on initial launch reporting shared libraries have a file format not recognized

Many dependent shared library binary files are stored in git-lfs. These files need to be fetched in order for Isaac ROS nodes to function correctly.

Symptoms

/usr/bin/ld:/workspaces/isaac_ros-dev/ros_ws/src/isaac_ros_common/isaac_ros_nvengine/gxf/lib/gxf_jetpack46/core/libgxf_core.so: file format not recognized; treating as linker script
/usr/bin/ld:/workspaces/isaac_ros-dev/ros_ws/src/isaac_ros_common/isaac_ros_nvengine/gxf/lib/gxf_jetpack46/core/libgxf_core.so:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [libgxe_node.so] Error 1
make[1]: *** [CMakeFiles/gxe_node.dir/all] Error 2
make: *** [all] Error 2

Solution

Run git lfs pull in each Isaac ROS repository you have checked out, especially isaac_ros_common, to ensure all of the large binary files have been downloaded.

Updates

Date	Changes
2021-11-03	Split DOPE and U-Net into separate repositories.
2021-10-20	Initial release

Files

README.md

Latest commit

History

README.md

File metadata and controls

Isaac ROS DNN Inference

Overview

System Requirements

Jetson

x86_64 (in Isaac ROS Dev Docker Container)

Docker

Dependencies

Setup

DNN Models

Pre-trained Models on NGC

Download Pre-trained Encrypted TLT Model (.etlt) from NGC

Convert the Encrypted TLT Model (.etlt) Format to the TensorRT Engine Plan

Custom AI Models

Triton Inference

Setup Triton Model Repository

Launch Triton Node

TensorRT Inference

Setup ONNX file or TensorRT Engine Plan

Run TensorRT Node

Package Reference

isaac_ros_tensor_rt

Overview

Available Components

isaac_ros_triton

Overview

Available Components

isaac_ros_dnn_encoders

Overview

Using isaac_ros_dnn_encoders

Available Components

Walkthroughs

Inference on PeopleSemSegnet using Triton

Troubleshooting

Nodes crashed on initial launch reporting shared libraries have a file format not recognized

Symptoms

Solution

Updates

`isaac_ros_tensor_rt`

`isaac_ros_triton`

`isaac_ros_dnn_encoders`

Using `isaac_ros_dnn_encoders`