Skip to content

Latest commit

 

History

History
69 lines (53 loc) · 2.9 KB

README.md

File metadata and controls

69 lines (53 loc) · 2.9 KB
Raw

iOS Project Template

Because current state of Xcode Project templates is not satisfying and this set of tools is not generic enough to be used as a framework, it needs to be copied into the project sources manually.

It is meant to be adjusted within the project itself on per project basis.

Install Xcode templates

You can copy the templates manually into Xcode's template folder.

Or you can move them using this script:

TEMPLATE_DIR="$HOME/Library/Developer/Xcode/Templates"
FILE_TEMPLATE_DIR="$TEMPLATE_DIR/File Templates/Netvor/"
PROJECT_TEMPLATE_DIR="$TEMPLATE_DIR/Project Templates/Netvor/"

mkdir "$FILE_TEMPLATE_DIR" 2> /dev/null
cp -R XcodeFileTemplates/*.xctemplate "$FILE_TEMPLATE_DIR"

mkdir "$PROJECT_TEMPLATE_DIR" 2> /dev/null
cp -R XcodeProjectTemplates/*.xctemplate "$PROJECT_TEMPLATE_DIR"

Create project

  1. Start by creating new project using NTVR Single View Code project template.
  2. Navigate into your main project folder (includes xcodeproj file).
  3. Copy sources from this repository using following code:
# VARIABLES
PROJECT_TEMPLATE_FOLDER="iOS-Project-Template-unique-krhgkjangkngdl"
NEW_PROJECT_FILE=`ls | grep *.xcodeproj`
NEW_PROJECT_NAME=${NEW_PROJECT_FILE%".xcodeproj"}

# CLONE AND COPY
git clone --depth 1 --branch master https://github.com/ntvr/iOS-Project-Template.git $PROJECT_TEMPLATE_FOLDER
mv "$PROJECT_TEMPLATE_FOLDER/iOSProjectTemplate/Utility" $NEW_PROJECT_NAME
mv "$PROJECT_TEMPLATE_FOLDER/iOSProjectTemplate/Persistence" $NEW_PROJECT_NAME
mv "$PROJECT_TEMPLATE_FOLDER/iOSProjectTemplate/Networking" $NEW_PROJECT_NAME
mv "$PROJECT_TEMPLATE_FOLDER/Podfile" .
mv "$PROJECT_TEMPLATE_FOLDER/.swiftlint.yml" .
mv "$PROJECT_TEMPLATE_FOLDER/.gitignore" .

# REPLACE TARGET NAME IN PODFILE
sed  -i "" "s/iOSProjectTemplate/$NEW_PROJECT_NAME/g" Podfile

# CLEANUP CLONED PROJECT
rm -rf $PROJECT_TEMPLATE_FOLDER
  1. Add newly cloned folders to your project from Xcode. Groups with associated folder should be created (yellow folders).
  2. Reorganize added folders as you like. Suggested order though is Protocol > Generic use component > Data definition > Implementation. Also the dependent are always below their dependency. For example LoginService (Protocol) > DefaultLoginRouter > DefaultLoginService.

Enable SwiftLint

  1. Add New Run Script Build phase with following code:
if which "${PODS_ROOT}/SwiftLint/swiftlint" > /dev/null; then
    # if you have project name with spaces or special characters
    swiftlint_cmd = "${PODS_ROOT}/SwiftLint/swiftlint"; "${swiftlint_cmd[@]}"
else
    echo "error: SwiftLint not installed, run `pod install`"
fi

Setup project signing

  1. For multiple configurations follow guide
  2. Setup HockeyApp/Firebase
  3. Setup Fastlane