v2.0.0-rc.0

The highlights of this release are:

• period comparisons [docs] [example]
• ability to change domains names #2803
• automatic geolocation database downloads #2362
• more email adapters support (Mailgun, Mandrill, SendGrid) #2649

Upgrading Plausible Analytics to v2.0

⚠️ ⚠️ ⚠️

Upgrading to v2.0 requires performing a data migration.
Please read these notes until the end before deploying v2.0.0-rc.0

Ensure you are using a new ClickHouse version

The steps below have been tested with clickhouse/clickhouse-server:22.6-alpine please make sure to upgrade ClickHouse to at least this version.

Here's the excerpt from v1.5 release discussion regarding the ClickHouse upgrade

---

In your docker-compose.yml update the image used for plausible_events_db to a newer ClickHouse version:

Upgrading ClickHouse to 22.6

plausible_events_db:
- image: yandex/clickhouse-server:21.3.2.5
+ image: clickhouse/clickhouse-server:22.6-alpine

Restart the container

$ docker compose stop plausible plausible_events_db
$ docker compose rm plausible_events_db
$ docker compose up -d

This will boot up the new version of ClickHouse.

Related PR: plausible/community-edition#45

---

Update image tag

In your docker-compose.yml update the image used for plausible to v2.0.0-rc.0

plausible:
- image: plausible/analytics:v1.5.1
+ image: plausible/analytics:v2.0.0-rc.0

and restart the container

$ cd hosting
$ docker compose stop plausible
$ docker compose rm plausible
$ docker compose up -d

This will boot up the new version of the app.

If you open the dashboards now, you wouldn't see any past metrics. This is expected as v2.0 uses the new events_v2 and sessions_v2 tables to store analytics data. We need to perform data migration to copy the data into the new tables.

Run data migration

⚠️ ⚠️ ⚠️

You need enough free disk space available for x2 of the current plausible_events_db's event-data volume size. You can use something like docker system df -v | grep hosting_event-data to check how much space the current volume is occupying.

Connect to the running plausible container and start the migration flow

$ cd hosting
$ docker compose exec plausible bin/plausible rpc Plausible.DataMigration.NumericIDs.run

You can attempt this migration multiple times unless you drop v1 tables.

Drop v1 tables (optional)

Once you verify the migration went well, the old tables can be dropped. It's easiest to use clickhouse-client for this

$ ch hosting
$ docker compose exec plausible_events_db clickhouse-client

:) \c plausible_events_db
:) show tables;
:) drop table events;
:) drop table sessions;

See https://clickhouse.com/docs/en/operations/server-configuration-parameters/settings#max-table-size-to-drop for how to drop tables with more than 50GB of data.

Enable automatic MaxMind GeoLite2 updates (optional)

In your plausible-config.env set MAXMIND_LICENSE_KEY environment variable and get an automatically updated GeoLite2 City geolocation database. The database edition is configurable with MAXMIND_EDITION environment variable and defaults to GeoLite2-City.

- IP_GEOLOCATION_DB=...
+ MAXMIND_LICENSE_KEY=LNpsJCCKPis6XvBP
+ MAXMIND_EDITION=GeoLite2-City

Note that for the changes in plausible-config.env to propagate to the plausible, the container needs to be recreated:

$ docker compose stop plausible
$ docker compose rm plausible
$ docker compose up -d

Also note that using GeoLite2-City edition requires more RAM than using GeoLite2-Country.

Now you can remove any other volumes and services used to download, store, and update geolocation databases.

Changelog

Following changes have been made since v1.5:

Added

• Ability to use '--' instead of '=' sign in the tagged-events classnames
• 'Last updated X seconds ago' info to 'current visitors' tooltips
• Add support for more Bamboo adapters, i.e. Bamboo.MailgunAdapter, Bamboo.MandrillAdapter, Bamboo.SendGridAdapter #2649
• Ability to change domain for existing site (requires numeric IDs data migration, instructions will be provided separately) UI + API (PUT /api/v1/sites)

Fixed

• Make goal-filtered CSV export return only unique_conversions timeseries in the 'visitors.csv' file
• Stop treating page filter as an entry page filter
• City report showing N/A instead of city names with imported data #2675
• Empty values for Screen Size, OS and Browser are uniformly replaced with "(not set)"
• Fix more pageviews with session prop filter than with no filters
• Cascade delete sent_renewal_notifications table when user is deleted #2549
• Show appropriate top-stat metric labels on the realtime dashboard when filtering by a goal
• Fix breakdown API pagination when using event metrics #2562
• Automatically update all visible dashboard reports in the realtime view
• Connect via TLS when using HTTPS scheme in ClickHouse URL #2570
• Add error message in case a transfer to an invited (but not joined) user is requested #2651
• Fix bug with showing property breakdown with a prop filter
• Fix bug when combining goal and prop filters #2654

Changed

• Treat page filter as entry page filter for bounce_rate
• Reject events with long URIs and data URIs #2536
• Always show direct traffic in sources reports #2531
• Stop recording XX and T1 country codes #2556
• Device type is now determined from the User-Agent instead of window.innerWidth #2711
• Add padding by default to embedded dashboards so that shadows are not cut off #2744
• Update the User Agents database (https://github.com/matomo-org/device-detector/releases/tag/6.1.1)

Removed

• Remove Firewall plug and IP_BLOCKLIST environment variable
• Remove the ability to collapse the main graph #2627

v1.5.1

The highlights of this release are:

• City and region level geolocation (disabled by default, please see below for the guide)
• Google Analytics integration: https://plausible.io/docs/google-analytics-import (WIP setup guide: plausible/docs#278)
• CSV data export: https://plausible.io/docs/export-stats
• ARM64 support
• Improved first launch experience

New first launch

Admin user registration is now done through the UI instead of configuration variables. At first launch, users are presented with a registration page which will create the admin account. Admin account related configuration variables are ignored going forward. See below for details.

Admin user registration is required from 1.5 onwards. We are deprecating the DISABLE_AUTH option which allowed Plausible to be used without any user account at all.

Users with existing admin accounts are not affected, but we recommend removing the unused configuration variables. A benefit of moving admin account management to the UI is that you can now change the admin email account through the UI. Previously, this was done by manual database changes and configuration change which required restarting the service.

Upgrading Plausible Analytics to v1.5

In your docker-compose.yml update the image used for plausible to v1.5.1

plausible:
- image: plausible/analytics:v1.4
+ image: plausible/analytics:v1.5.1

_{Please make sure to not use v1.5.0 release which had startup problems: #2491}

Restart the container

$ docker compose stop plausible
$ docker compose rm plausible
$ docker compose up -d

This will boot up the new version of the app.

City-level geolocation setup (Optional, requires more memory)

⚠️ Note that this city level geolocation feature requires extra ~1GB of RAM to work. If you don't have enough RAM available, you might experience slow container startups and restarts.

City level geolocation can be enabled by mounting a volume with the downloaded geonames.csv and geolite2-city.mmdb and setting GEONAMES_SOURCE_FILE and IP_GEOLOCATION_DB to point to them:

$ # custom (smaller) csv can be used, see https://github.com/plausible/location#cities for more info
$ curl -O https://s3.eu-central-1.wasabisys.com/plausible-application/geonames.csv

$ export MAXMIND_LICENSE_KEY=LNpsJCCKPis6XvBP # this key is not valid anymore
$ curl -L "https://download.maxmind.com/app/geoip_download?edition_id=GeoLite2-City&license_key=${MAXMIND_LICENSE_KEY}&suffix=tar.gz" -o geolite2-city.mmdb.gz
$ gunzip geolite2-city.mmdb.gz

docker-compose.yml

  plausible:
    image: plausible/analytics:v1.5.1
+   volumes:
+     - ./geonames.csv:/etc/app/geonames.csv:ro
+     - ./geolite2-city.mmdb:/etc/app/geolite2-city.mmdb:ro

plausible-conf.env

BASE_URL=replace-me
SECRET_KEY_BASE=replace-me
+ GEONAMES_SOURCE_FILE=/etc/app/geonames.csv
+ IP_GEOLOCATION_DB=/etc/app/geolite2-city.mmdb

Upgrading ClickHouse to 22.6 (Optional, but recommended)

In your docker-compose.yml update the image used for plausible_events_db to a newer ClickHouse version:

plausible_events_db:
- image: yandex/clickhouse-server:21.3.2.5
+ image: clickhouse/clickhouse-server:22.6-alpine

Restart the container

$ docker compose stop plausible plausible_events_db
$ docker compose rm plausible_events_db
$ docker compose up -d

This will boot up the new version of ClickHouse.

Related PR: plausible/community-edition#45

Upgrading PostgreSQL to 14 (Optional, but recommended)

Upgrading PostgreSQL is a bit trickier, here's the upgrade guide.

Removing deprecated commands and environment variables (Optional, but recommended)

ADMIN_USER_EMAIL, ADMIN_USER_NAME, ADMIN_USER_PWD, DISABLE_AUTH environment variables are no longer supported and are ignored if set.

Please remove them from plausible-conf.env:

- ADMIN_USER_EMAIL=replace-me
- ADMIN_USER_NAME=replace-me
- ADMIN_USER_PWD=replace-me
- DISABLE_AUTH=true
  BASE_URL=replace-me
  SECRET_KEY_BASE=replace-me

/entrypoint.sh db init-admin command that was responsible for creating the admin user is also deprecated.

Please remove it from docker-compose.yml:

plausible:
  image: plausible/analytics:v1.5.1
- command: sh -c "sleep 10 && /entrypoint.sh db createdb && /entrypoint.sh db migrate && /entrypoint.sh db init-admin && /entrypoint.sh run"
+ command: sh -c "sleep 10 && /entrypoint.sh db createdb && /entrypoint.sh db migrate && /entrypoint.sh run"

Changelog

Following changes have been made since v1.4:

Added

• Set a different interval on the top graph #1574 (thanks to @Vigasaurus for this feature)
• A tagged-events script extension for out-of-the-box custom event tracking
• The ability to escape | characters with \ in Stats API filter values
• An upper bound of 1000 to the limit parameter in Stats API
• The exclusions script extension now also takes a data-include attribute tag
• A file-downloads script extension for automatically tracking file downloads as custom events
• Integration with Matomo's referrer spam list to block known spammers
• API route PUT /api/v1/sites/goals with form params site_id, event_name and/or page_path, and goal_type with supported types event and page
• API route DELETE /api/v1/sites/goals/:goal_id with form params site_id
• The public breakdown endpoint can be queried with the "events" metric
• Data exported via the download button will contain CSV data for all visible graps in a zip file.
• Region and city-level geolocation #1449
• The u option can now be used in the manual extension to specify a URL when triggering events.
• Delete a site and all related data through the Sites API
• Subscribed users can see their Paddle invoices from the last 12 months under the user settings
• Allow custom styles to be passed to embedded iframe #1522
• New UTM Tags utm_content and utm_term #515
• If a session was started without a screen_size it is updated if an event with screen_size occurs
• Added LISTEN_IP configuration parameter #1189
• The breakdown endpoint with the property query property=event:goal returns custom goal properties (within props)
• Added IPv6 Ecto support (via the environment-variable ECTO_IPV6)
• New filter type: contains, available for page, entry_page, exit_page
• Add filter for custom property
• Add ability to import historical data from GA: #1753
• API route GET /api/v1/sites/:site_id
• Hovering on top of list items will now show a tooltip with the exact number instead of a shortened version
• Filter goals in realtime filter by clicking goal name
• The time format (12 hour or 24 hour) for graph timelines is now presented based on the browser's defined language
• Choice of metric for main-graph both in UI and API (visitors, pageviews, bounce_rate, visit_duration) #1364
• New width=manual mode for embedded dashboards #2148
• Add more timezone options
• Add new strategy to recommend timezone when creating a new site
• Alert outgrown enterprise users of their usage #2197
• Manually lock and unlock enterprise users #2197
• ARM64 support for docker images #2103
• Add support for international domain names (IDNs) #2034
• Allow self-hosters to register an account on first launch
• Fix ownership transfer invitation link in self-hosted deployments

Fixed

• Plausible script does not prevent default if it's been prevented by an external script plausible/analytics#1941
• Hash part of the URL can now be used when excluding pages with script.exclusions.hash.js.
• UI fix where multi-line text in pills would not be underlined properly on small screens.
• UI fix to align footer columns
• Guests can now use the favicon to toggle additional info about the site bing viewed (such as in public embeds).
• Fix SecurityError in tracking script when user has blocked all local storage
• Prevent dashboard graph from being selected when long pressing on the graph in a mobile browser
• The exported pages.csv file now includes pageviews again plausible/analytics#1878
• Fix a bug where city, region and country filters were filtering stats but not the location list
• Fix a bug where regions were not being saved
• Timezone offset labels now update with time changes
• Render 404 if shared link auth cannot be verified plausible/analytics#2225
• Restore compatibility with older format of shared links plausible/analytics#2225
• Fix 'All time' period for sites with no recorded stats plausible/analytics#2277
• Ensure settings page can be r...

v1.5.0-rc.1

Admin user registration is now done through the UI instead of configuration variables. At first launch, users are presented with a registration page which will create the admin account. Admin account related configuration variables are ignored going forward. See below for details.

Admin user registration is required from 1.5.0 onwards. We are deprecating the DISABLE_AUTH option which allowed Plausible to be used without any user account at all.

Users with existing admin accounts are not affected, but we recommend removing the unused configuration variables. A benefit of moving admin account management to the UI is that you can now change the admin email account through the UI. Previously, this was done by manual database changes and configuration change which required restarting the service.

For v1.5.0-rc.0 changes and upgrade steps please see the previous release candidate discussion.

Upgrading Plausible Analytics to v1.5.0-rc.1

In your docker-compose.yml update the image used for plausible to tag v1.5.0-rc.1:

plausible:
- image: plausible/analytics:1.5.0-rc.0
+ image: plausible/analytics:v1.5.0-rc.1

Restart the container

$ docker compose stop plausible
$ docker compose rm plausible
$ docker compose up -d

This will boot up the new version of the app.

Removing deprecated commands and environment variables (Optional, but recommended)

ADMIN_USER_EMAIL, ADMIN_USER_NAME, ADMIN_USER_PWD, DISABLE_AUTH environment variables are no longer supported and are ignored if set.

Please remove them from plausible-conf.env:

- ADMIN_USER_EMAIL=replace-me
- ADMIN_USER_NAME=replace-me
- ADMIN_USER_PWD=replace-me
- DISABLE_AUTH=true
  BASE_URL=replace-me
  SECRET_KEY_BASE=replace-me

/entrypoint.sh db init-admin command that was responsible for creating the admin user is also deprecated.

Please remove it from docker-compose.yml:

plausible:
  image: plausible/analytics:v1.5.0-rc.1
- command: sh -c "sleep 10 && /entrypoint.sh db createdb && /entrypoint.sh db migrate && /entrypoint.sh db init-admin && /entrypoint.sh run"
+ command: sh -c "sleep 10 && /entrypoint.sh db createdb && /entrypoint.sh db migrate && /entrypoint.sh run"

Changelog

Following changes have been made since v1.5.0-rc.0:

Added

• Allow self-hosters to register an account on first launch

Deprecated

• DISABLE_AUTH is no longer supported

v1.5.0-rc.0

The highlights of this release are:

• City and region level geolocation (disabled by default, please see this discussion for setup info)
• Google Analytics integration: https://plausible.io/docs/google-analytics-import (WIP setup guide: plausible/docs#278)
• CSV data export: https://plausible.io/docs/export-stats
• ARM64 support

Upgrading Plausible Analytics to v1.5

In your docker-compose.yml update the image used for plausible to tag 1.5.0-rc.0:

plausible:
- image: plausible/analytics:v1.4
+ image: plausible/analytics:1.5.0-rc.0

Restart the container

$ docker compose stop plausible
$ docker compose rm plausible
$ docker compose up -d

This will boot up the new version of the app.

Upgrading ClickHouse to 22.6 (Optional, but recommended)

In your docker-compose.yml, update the image used for plausible_events_db to the newest stable ClickHouse version:

plausible_events_db:
- image: yandex/clickhouse-server:21.3.2.5
+ image: clickhouse/clickhouse-server:22.6-alpine

Restart the container

$ docker compose stop plausible plausible_events_db
$ docker compose rm plausible_events_db
$ docker compose up -d

This will boot up the new version of ClickHouse.

Related PR: plausible/community-edition#45

Upgrading PostgreSQL to 14 (Optional, but recommended)

Upgrading PostgreSQL is a bit trickier, here's the upgrade guide.

Changelog

Following changes have been made since v1.4:

Added

• The ability to escape | characters with \ in Stats API filter values
• An upper bound of 1000 to the limit parameter in Stats API
• The exclusions script extension now also takes a data-include attribute tag
• A file-downloads script extension for automatically tracking file downloads as custom events
• Integration with Matomo's referrer spam list to block known spammers
• API route PUT /api/v1/sites/goals with form params site_id, event_name and/or page_path, and goal_type with supported types event and page
• API route DELETE /api/v1/sites/goals/:goal_id with form params site_id
• The public breakdown endpoint can be queried with the "events" metric
• Data exported via the download button will contain CSV data for all visible graps in a zip file.
• Region and city-level geolocation #1449
• The u option can now be used in the manual extension to specify a URL when triggering events.
• Delete a site and all related data through the Sites API
• Subscribed users can see their Paddle invoices from the last 12 months under the user settings
• Allow custom styles to be passed to embedded iframe #1522
• New UTM Tags utm_content and utm_term #515
• If a session was started without a screen_size it is updated if an event with screen_size occurs
• Added LISTEN_IP configuration parameter #1189
• The breakdown endpoint with the property query property=event:goal returns custom goal properties (within props)
• Added IPv6 Ecto support (via the environment-variable ECTO_IPV6)
• New filter type: contains, available for page, entry_page, exit_page
• Add filter for custom property
• Add ability to import historical data from GA: #1753
• API route GET /api/v1/sites/:site_id
• Hovering on top of list items will now show a tooltip with the exact number instead of a shortened version
• Filter goals in realtime filter by clicking goal name
• The time format (12 hour or 24 hour) for graph timelines is now presented based on the browser's defined language
• Choice of metric for main-graph both in UI and API (visitors, pageviews, bounce_rate, visit_duration) #1364
• New width=manual mode for embedded dashboards #2148
• Add more timezone options
• Add new strategy to recommend timezone when creating a new site
• Alert outgrown enterprise users of their usage #2197
• Manually lock and unlock enterprise users #2197
• ARM64 support for docker images #2103
• Add support for international domain names (IDNs) #2034

Fixed

• Plausible script does not prevent default if it's been prevented by an external script plausible/analytics#1941
• Hash part of the URL can now be used when excluding pages with script.exclusions.hash.js.
• UI fix where multi-line text in pills would not be underlined properly on small screens.
• UI fix to align footer columns
• Guests can now use the favicon to toggle additional info about the site bing viewed (such as in public embeds).
• Fix SecurityError in tracking script when user has blocked all local storage
• Prevent dashboard graph from being selected when long pressing on the graph in a mobile browser
• The exported pages.csv file now includes pageviews again plausible/analytics#1878
• Fix a bug where city, region and country filters were filtering stats but not the location list
• Fix a bug where regions were not being saved
• Timezone offset labels now update with time changes
• Render 404 if shared link auth cannot be verified plausible/analytics#2225
• Restore compatibility with older format of shared links plausible/analytics#2225
• Fix 'All time' period for sites with no recorded stats plausible/analytics#2277
• Ensure settings page can be rendered after a form error plausible/analytics#2278

Changed

• script.file-downloads.outbound-links.js only sends an outbound link event when an outbound download link is clicked
• Plausible script now uses callback navigation (instead of waiting for 150ms every time) when sending custom events
• Cache the tracking script for 24 hours
• Move entry_page and exit_page to be part of the Page filter group
• Paginate /api/sites results and add a View all link to the site-switcher dropdown in the dashboard.
• Remove the + Add Site link to the site-switcher dropdown in the dashboard.
• DISABLE_REGISTRATIONS configuration parameter can now accept invite_only to allow invited users to register an account while keeping regular registrations disabled #1841
• New and improved Session tracking module for higher throughput and lower latency. PR#1934
• Do not display ZZ country code in countries report PR#1934
• Add fallback icon for when DDG favicon cannot be fetched PR#2279

v1.4.4

Security patch for password reset emails. Analysis of the issue and its impact: https://my-devbox.de/en/blog/accidental-pen-tester-evening/

Fixed

• Fix vulnerability with password reset emails

v1.4.3

Fixed

• Make sure that ownership transfer can be made in self-hosted without creating a trial

v1.4.2

v1.4.2

Fixed

• Fixes database error when filtered for goal with empty data

v1.4.1

v1.4.1

Fixed

• Fixes database error when pathname contains a question mark

v1.4.0

The highlights of this release are:

• Invite team members to your site dashboard
• More powerful filtering options
• Email verification requirement for users is now disabled by default. It can be enabled with the ENABLE_EMAIL_VERIFICATION=true option.

To update your installation, make sure your _docker-compose.yml_l file is referencing plausible/analytics with the following tag: v1.4.0. Then run the following commands:

$ docker-compose down
$ docker-compose pull plausible
$ docker-compose up -d

This will run your database migrations and boot up the new version of the app. Following changes have been made since v1.3:

Added

• New parameter metrics for the /api/v1/stats/timeseries endpoint #952
• CSV export now includes pageviews, bounce rate and visit duration in addition to visitors #952
• Send stats to multiple dashboards by configuring a comma-separated list of domains #968
• To authenticate against a local postgresql via socket authentication, the environment-variables
  DATABASE_SOCKET_DIR & DATABASE_NAME were added.
• Time on Page metric available in detailed Top Pages report #1007
• Wildcard based page, entry page and exit page filters #1067
• Exclusion filters for page, entry page and exit page filters #1067
• Menu (with auto-complete) to add new and edit existing filters directly #1089
• Added CLICKHOUSE_FLUSH_INTERVAL_MS and CLICKHOUSE_MAX_BUFFER_SIZE configuration parameters #1073
• Ability to invite users to sites with different roles #1122
• Option to configure a custom name for the script file
• Add Conversion Rate to Top Sources, Top Pages Devices, Countries when filtered by a goal #1299
• Add list view for countries report in dashboard #1381
• Add ability to view more than 100 custom goal properties #1353

Fixed

• Fix weekly report time range #951
• Make sure embedded dashboards can run when user has blocked third-party cookies #971
• Sites listing page will paginate if the user has a lot of sites #994
• Crash when changing theme on a loaded dashboard #1123
• UI fix for details button overlapping content on mobile #1114
• UI fix for the main graph on mobile overlapping its tick items on both axis
• UI fixes for text not showing properly in bars across multiple lines. This hides the totals on <768px and only shows the uniques and % to accommodate the goals text too. Larger screens still truncate as usual.
• Turn off autocomplete for name and password inputs in the New shared link form.
• Details modals are now responsive and take up less horizontal space on smaller screens to make it easier to scroll.
• Fix reading config from file
• Fix some links not opening correctly in new tab
• UI fix for more than one row of custom event properties #1383
• UI fix for user menu and time picker overlapping #1352
• Respect the path component of BASE_URL to allow subfolder installatons

Removed

• Removes AppSignal monitoring package

Changes

• Disable email verification by default. Added a configuration option ENABLE_EMAIL_VERIFICATION=true if you want to keep the old behaviour

v1.4.0-rc.0

The highlights of this release are:

• Invite team members to your site dashboard
• More powerful filtering options
• Email verification requirement for users is now disabled by default. It can be enabled with the ENABLE_EMAIL_VERIFICATION=true option.

This is a release candidate for testing. To update your installation, make sure your docker-compose.yml file is referencing plausible/analytics with the following tag: v1.4.0-rc.0. Then run the following commands:

$ docker-compose down
$ docker-compose pull plausible
$ docker-compose up -d

This will run your database migrations and boot up the new version of the app. Following changes have been made since v1.3:

Added

• New parameter metrics for the /api/v1/stats/timeseries endpoint #952
• CSV export now includes pageviews, bounce rate and visit duration in addition to visitors #952
• Send stats to multiple dashboards by configuring a comma-separated list of domains #968
• To authenticate against a local postgresql via socket authentication, the environment-variables
  DATABASE_SOCKET_DIR & DATABASE_NAME were added.
• Time on Page metric available in detailed Top Pages report #1007
• Wildcard based page, entry page and exit page filters #1067
• Exclusion filters for page, entry page and exit page filters #1067
• Menu (with auto-complete) to add new and edit existing filters directly #1089
• Added CLICKHOUSE_FLUSH_INTERVAL_MS and CLICKHOUSE_MAX_BUFFER_SIZE configuration parameters #1073
• Ability to invite users to sites with different roles #1122
• Option to configure a custom name for the script file
• Add Conversion Rate to Top Sources, Top Pages Devices, Countries when filtered by a goal #1299
• Add list view for countries report in dashboard #1381
• Add ability to view more than 100 custom goal properties #1353

Fixed

• Fix weekly report time range #951
• Make sure embedded dashboards can run when user has blocked third-party cookies #971
• Sites listing page will paginate if the user has a lot of sites #994
• Crash when changing theme on a loaded dashboard #1123
• UI fix for details button overlapping content on mobile #1114
• UI fix for the main graph on mobile overlapping its tick items on both axis
• UI fixes for text not showing properly in bars across multiple lines. This hides the totals on <768px and only shows the uniques and % to accommodate the goals text too. Larger screens still truncate as usual.
• Turn off autocomplete for name and password inputs in the New shared link form.
• Details modals are now responsive and take up less horizontal space on smaller screens to make it easier to scroll.
• Fix reading config from file
• Fix some links not opening correctly in new tab
• UI fix for more than one row of custom event properties #1383
• UI fix for user menu and time picker overlapping #1352
• Respect the path component of BASE_URL to allow subfolder installatons

Removed

• Removes AppSignal monitoring package

Changes

• Disable email verification by default. Added a configuration option ENABLE_EMAIL_VERIFICATION=true if you want to keep the old behaviour