-
Notifications
You must be signed in to change notification settings - Fork 179
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
SoapySDR::Device::readStream timeout! Rsp1 #426
Comments
@kevtheskin - you may want to try to run The command to do that is:
The output from that command should look more or less like this:
If you see timeout errors or the sample rates are very different from what I see here, then we probably need to troubleshoot what's going on with your RSP1. Franco |
Morning, I am running Openwebrx + and getting a lot of SoapySDR::Device::readStream timeout! and failing to start. I can see my device using
radio@openwebrxplus:~ $ SoapySDRUtil --probe="driver=sdrplay"
######################################################
Soapy SDR -- the SDR abstraction library
######################################################
Probe device driver=sdrplay
[INFO] devIdx: 0
[INFO] SerNo: B0001P0001
[INFO] hwVer: 1
[INFO] rspDuoMode: 0
[INFO] tuner: 1
[INFO] rspDuoSampleFreq: 0.000000
-- Device identification
driver=SDRplay
hardware=RSP1
sdrplay_api_api_version=3.070000
sdrplay_api_hw_version=1
-- Peripheral summary
Channels: 1 Rx, 0 Tx
Timestamps: NO
Other Settings:
* RF Gain Select - RF Gain Select
[key=rfgain_sel, default=1, type=string, options=(0, 1, 2, 3)]
* IQ Correction - IQ Correction Control
[key=iqcorr_ctrl, default=true, type=bool]
* AGC Setpoint - AGC Setpoint (dBfs)
[key=agc_setpoint, default=-30, type=int, range=[-60, 0]]
-- RX Channel 0
Full-duplex: YES
Supports AGC: YES
Stream formats: CS16, CF32
Native format: CS16 [full-scale=32767]
Antennas: RX
Corrections: DC removal
Full gain range: [20, 59] dB
IFGR gain range: [20, 59] dB
RFGR gain range: [0, 3] dB
Full freq range: [0.01, 2000] MHz
RF freq range: [0.01, 2000] MHz
CORR freq range: MHz
Sample rates: 0.0625, 0.096, 0.125, 0.192, 0.25, ..., 6, 7, 8, 9, 10 MSps
Filter bandwidths: 0.2, 0.3, 0.6, 1.536, 5, 6, 7, 8 MHz
But fails to start in browser. Any suggestions how to fix please. Cheers Kev
The text was updated successfully, but these errors were encountered: