Skip to content

Latest commit

 

History

History
124 lines (114 loc) · 10.6 KB

Compilation-MSVC-2008-(static-linkage).mediawiki

File metadata and controls

124 lines (114 loc) · 10.6 KB
Raw

This page describes how to compile qBittorrent using MSVC 2008 under Windows. This is tested under Windows XP sp2 but it should work the same under any other Windows version. Also it should build fine with MSVC 2010 with minor adjustments. Here the Express Edition of MSVC 2008 was used but the full edition must behave the same.

Table of Contents

What you will need:

Let's assume that the working directory for our compilation will be C:\qBittorrent

Compiling Zlib

  • Extract the Zlib source inside our working dir.
  • Open the MSVC2008 command shell. Start->Programs->Microsoft Visual C++ 2008 Express Edition->Visual Studio Tools->Visual Studio 2008 Command Prompt
  • Navigate to the Zlib source folder. eg cd C:\qBittorrent\zlib-1.2.7
  • Edit the win32/Makefile.msc file. Find the CFLAGS and LDFLAGS variables and replace it with these:
 CFLAGS  = -nologo -W3 -O2 -Oy- -Zi -Fd"zlib" nologo -Zm200 -Zc:wchar_t- -O1 -Og -GL -MT $(LOC)
 LDFLAGS = -nologo -debug -incremental:no -opt:ref -opt:icf -dynamicbase -nxcompat -ltcg /nodefaultlib:msvcrt

  • Issue the following commands:
 nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="inffas32.obj match686.obj"

  • Copy zlib.h, zconf.h, zlib.lib, zlib.pdb to our install dir.
 xcopy zlib.h C:\qBittorrent\install\include\
 xcopy zconf.h C:\qBittorrent\install\include\
 xcopy zlib.lib C:\qBittorrent\install\lib\
 xcopy zlib.pdb C:\qBittorrent\install\lib\

Compiling OpenSSL

  • Make sure you have installed perl and nasm.
  • Extract the OpenSSL source inside our working dir.
  • Open the MSVC2008 command shell. Start->Programs->Microsoft Visual C++ 2008 Express Edition->Visual Studio Tools->Visual Studio 2008 Command Prompt
  • Navigate to the OpenSSL source folder. eg cd C:\qBittorrent\openssl-1.0.1e
  • Now we will build a static version of OpenSSL. Issue the following commands:
 perl Configure VC-WIN32 no-shared zlib no-zlib-dynamic threads --prefix=C:\qBittorrent\install -IC:\qBittorrent\install\include -LC:\qBittorrent\install\lib
 ms\do_nasm

  • Edit the C:\qBittorrent\openssl-1.0.1e\ms\nt.mak file and find the line that says:
 EX_LIBS=/libpath:C:\qBittorrent\install\lib ws2_32.lib gdi32.lib advapi32.lib crypt32.lib user32.lib zlib1.lib

  • Replace zlib1.lib with zlib.lib
  • Find the CFLAG variable and append:
  -nologo -Zm200 -Zc:wchar_t- -O1 -Og -GL -MT -Zi

  • Find line that says:
 LFLAGS=/nologo /subsystem:console /opt:ref /debug

  • And append:
 /incremental:no /opt:ref /opt:icf /dynamicbase /nxcompat /ltcg /nodefaultlib:msvcrt

  • Then issue the following:
 nmake -f ms\nt.mak
 nmake -f ms\nt.mak install

Compiling Boost

  • Extract the Boost sources in the working dir.
  • Open the MSVC2008 command shell. Start->Programs->Microsoft Visual C++ 2008 Express Edition->Visual Studio Tools->Visual Studio 2008 Command Prompt
  • Navigate to the Boost source folder. If you are still in the MSVC shell just issue (assuming you have only one folder beginning with the letter 'b' in your qBt folder) the command
  cd ..
  cd b<TAB><ENTER>

  • Now you will need to bootstrap Boost so it will build b2.exe(previously bjam.exe). Issue the following command:
 bootstrap.bat

  • Compile a static version of Boost. Issue the following command where N is the number of CPU cores you have or how many threads you want b2 to use when compiling (msvc version is needed for the correct choice of msvc-9.0 if installed msvc-10.0) (replace N with the number of processor cores):
 b2 -q --with-system --toolset=msvc-9.0 variant=release link=static runtime-link=static -j N

  • (Optional) This is what you can put in a batch file -- e.g. 'mkb.bat' -- to perform the above. Assuming you don't care about how many threads boost will use. You must stay within this command prompt to benefit from the SET command here, when you navigate to the next step.
 call bootstrap
 b2 -q --with-system --toolset=msvc-9.0 variant=release link=static runtime-link=static -j 1
 for /f "tokens=* delims=/" %%A in ('cd') do set BOOST_ROOT=%%A
 echo on
 cd ..
 rem Now navigate to the next folder, issuing the command 'cd L<TAB><ENTER>

Compiling Libtorrent

  • Extract the Libtorrent sources in the working dir.
  • Open the MSVC2008 command shell. Start->Programs->Microsoft Visual C++ 2008 Express Edition->Visual Studio Tools->Visual Studio 2008 Command Prompt
  • Navigate to the Libtorrent source folder. eg cd C:\qBittorrent\libtorrent-rasterbar-0.16.9
  • Copy the b2.exe from the Boost directory to the Libtorrent directory
 copy ..\boost_1_53_0\b2.exe b2.exe

  • Compile a static version of Libtorrent. Issue the following command where N is the number of CPU cores you have or how many threads you want b2 to use when compiling, adjust the value of BOOST_ROOT to the Boost source directory(absolute path) and adjuct the value of the "include=" and "library-path=" keywords:
 b2 -q --without-python --toolset=msvc-9.0 variant=release link=static runtime-link=static encryption=openssl logging=none geoip=static dht-support=on boost=source character-set=unicode boost-link=static -sBOOST_ROOT="C:\qBittorrent\boost_1_53_0" include="C:\QBITTORRENT\install\include" library-path="C:\QBITTORRENT\install\lib" -j N

  • If you want to continue with the lazy batch file approach here's the batch file you need to use (still assuming you haven't left the VS2008 Command prompt) -- copy and paste it to e.g. 'mkl.bat' and place it in your lib* folder and then run it:
 copy %BOOST_ROOT%\b2.exe
 b2 -q --without-python --toolset=msvc-9.0 variant=release link=static runtime-link=static encryption=openssl logging=none geoip=static dht-support=on boost=source character-set=unicode boost-link=static -sBOOST_ROOT="C:\qBittorrent\boost_1_53_0" include="C:\QBITTORRENT\install\include" library-path="C:\QBITTORRENT\install\lib" -j 1
 echo on
 cd ..
 rem Now navigate to the next folder, issuing the command 'cd QT<TAB><ENTER>

Compiling Qt

  • Extract the Qt sources in the working dir.
  • Open the MSVC2008 command shell. Start->Programs->Microsoft Visual C++ 2008 Express Edition->Visual Studio Tools->Visual Studio 2008 Command Prompt
  • Navigate to the Qtsource folder. eg cd C:\qBittorrent\qt-everywhere-opensource-src-4.8.4
  • Now we will build a static version of Qt with making as small as possible.
  • Open mkspecs\win32-msvc2008\qmake.conf and replace the QMAKE_CFLAGS_RELEASE line with:
 QMAKE_CFLAGS_RELEASE = -O1 -Og -GL -MT

QMAKE_LFLAGS line with: 

 QMAKE_LFLAGS = /NOLOGO /DYNAMICBASE /NXCOMPAT /LTCG

QMAKE_LFLAGS_RELEASE line with: 

 QMAKE_LFLAGS_RELEASE = /INCREMENTAL:NO /NODEFAULTLIB:MSVCRT

  • Open src\3rdparty\zlib_dependency.pri and replace zdll.lib with zlib.lib
  • Do the same for src\tools\bootstrap\bootstrap.pri
  • Issue the following commands:
 configure.exe -debug-and-release -opensource -static -ltcg -fast -system-zlib -no-qt3support -no-opengl -no-openvg -no-dsp -no-vcproj -no-dbus -no-phonon -no-phonon-backend -no-multimedia -no-audio-backend -no-webkit -no-script -no-scripttools -no-declarative -no-declarative-debug -mp -arch windows -qt-style-windowsxp -nomake examples -nomake demos -platform win32-msvc2008 -openssl-linked -largefile -I "C:\QBITTORRENT\install\include" -L "C:\QBITTORRENT\install\lib"
 bin\qmake.exe projects.pro QT_BUILD_PARTS="libs translations"
 nmake

  • At some point the build will fail. Go to lib/ and open in a text editor QtNetwork.prl and QtNetworkd.prl. Append to the end of QMAKE_PRL_LIBS these: gdi32.lib crypt32.lib
  • Run nmake again.
  • You can close the command prompt now.

Install and Configure Qt Creator

  • Just follow the installer instructions for the installation.
  • Launch Qt Creator and select Tools->Options...
  • Select the Build & Run item from the left and select the Qt Versions tab.
  • Click the Add... button and select the qmake.exe you just build. It should be in C:\qBittorrent\qt-everywhere-opensource-src-4.8.4\bin\qmake.exe
  • Name it something meaningful like "Qt 4.8.4 - MSVC2008"
  • Apply the changes and close the window

Compiling qBittorrent

  • Go to Maxmind and download the GeoLite Country database in binary format. Here is the link.
  • Extract the GeoIP.dat file inside C:\qBittorrent\qbittorrent-3.0.9\src\geoip.
  • Launch Qt Creator and open the qbittorrent.pro file in C:\qBittorrent\qbittorrent-3.0.9
  • From the Window that pops up select the Qt version you added above and specify release version. Also check the Use Shadow Building checkbox. You can also select where qBittorrent will be built if you want.
  • Open the winconf.pri file and adjust the paths. Read the comments. NOTE: Replace any '\' with '/' in the paths to avoid some Qt warnings.
  • Open the winconf-msvc.pri file and adjust the filename of the lib of Boost.
  • Select Build->Build All
  • After the compilation ends you should have qbittorrent.exe in <build></build>\src\release. "build folder" is where you chose qBittorrent to be build in the popup window.