Skip to content

Latest commit

 

History

History
210 lines (146 loc) · 8.41 KB

CHANGELOG.md

File metadata and controls

210 lines (146 loc) · 8.41 KB
Raw

Change Log

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

v0.11.0 - 2024-12-02

Added

  • Support for Urukul-AD9912 as a downstream EEM

Changed

  • Various dependencies bumped (among them Miniconf v0.13 -> v0.18)

v0.10.0

Added

  • Serial terminal is available on USB for settings configurations
  • Reboot to DFU support added via the serial terminal for remote bootloading
  • The meta topic now contains metadata about the compiler, firmware, and hardware similar to Booster
  • Panic information is now persisted after reboot and available via telemetry and the USB serial console.
  • Device operational settings can now be modified, stored and cleared from device flash using the USB serial console. Run-time settings are unique to each application, but network settings are unified for all applications (i.e. lockin, dual-iir, etc.)

Changed

  • Broker and static IP/DHCP are no longer configured at compile time, but is maintained in device flash and can be changed via the USB port.
  • MSRV removed. Stabilizer uses latest stable rust.
  • The IIR (biquad) filter used for PID action has changed its serialization format. See also the iir_coefficients Python CLI implementation.
  • The stream target is now configures as a 1.2.3.4:4321 string

Fixed

  • Fixed an issue where the device would sometimes not enumerate on Windows

v0.9.0

Fixed

  • Fixed a defect where powering up with Pounder attached would cause an internal panic.

Changed

  • idsp crate update to 0.10: lockin now uses a double second order lowpass.
  • The batch_size field in the the UDP stream frame now contains the number of batches not the number of samples per batch. It has been renamed to batches.
  • All MQTT clients upgraded and APIs updated.
  • MQTT broker may now be specified via DNS hostnames
  • hitl/streaming.py no longer requires a prefix
  • Streaming now supports UDP multicast addresses

v0.8.1 - 2022-11-14

  • Fixed the python package dependencies

v0.8.0 - 2022-11-07

  • [breaking] MSRV bumped to 1.63 (array_from_fn via enum_iterator)
  • [breaking] Bumped dependencies on miniconf, minimq leading to changes in the Miniconf settings API
  • Bumped HAL dependency to fix a crucial I2C bug
  • Added gain limits for iir_coefficients
  • Added a IIR transfer function plotting tool
  • Fixed a bug in the Python telemetry client that led to no data being returned
  • EEM Gpio pins are now available from setup()
  • Added white noise output to signal_generator

v0.7.0 - 2022-08-10

Added

  • Optional specification of a static IP address (#509)
  • Temperature sensor measurement for Pounder and Stabilizer's CPU has been added #575
  • External clock support for Pounder
  • Auxiliary ADC support for Pounder

Removed

  • Minimum supported Rust version bumped to 1.62
  • The pounder_v1_1 feature has been replaced by the pounder_v1_0 feature with inverse meaning.
  • The Telemetry python client has been integrated into the stabilizer Python library

Fixed

  • Fixed panics when using a batch size of 1 (#540)
  • Fixed an issue where startup delays were 1/4 of what they should be (#524)
  • Fixed Pounder GPIO extender issues by rewriting the mcp280xx crate
  • Fixed improper calculation of the signal generator phase increment (#543)

v0.6.0 - 2022-02-11

Added

  • Telemetry (#341)
  • Logging via RTT (real time tracing) over SWD/JTAG instead of semihosting for fast and low-overhead debugging (#393 #391 #358)
  • Settings structures now automatically publish after a short delay on boot (#475)
  • Full-rate data streaming (e.g. complete raw ADC/DAC data) via Ethernet/UDP (#414 #394 #380)
  • Compilation specifically targeting Cortex-M7 instruction set for faster code (#358)
  • Fast double-buffered DMA pattern for less overhead (#367)
  • Integrated signal generator for stimulus and scan waveform generation (#434 #388)
  • Expanded code documentation (#452 #346)
  • Quick-start guide and book (#431 #430 #401 #404 #483)
  • Expanded and revised python API including the computation of IIR coefficients from PID gains (#472 #471 #451 #427)
  • Device MQTT broker connection status indicated via MQTT (#468 #441)
  • The signal generator supports adjusting its phase (#505)

Changed

  • Const generics, bumping the MSRV to 1.51.0 (#355 etc)
  • lockin-internal and lockin-external have been merged into lockin (#352)
  • Set target CPU to cortex-m7
  • Process routine can be executed from fast closely coupled memory with wide bus for faster execution (#420)
  • Relicensed as MIT/Apache (#419 #416)
  • Minimum supported Rust version bumped to 1.57

Fixed

  • Minimized DAC output pulses during boot (#453)

v0.5.0 - 2021-04-21

Added

  • Batch sample processing
  • DMA for ADC and DAC batches
  • Pounder profile streaming
  • DSP library with lots of optimized algorithms
  • Digital input support
  • Hardware in the loop continuous integration testing
  • Dependency updates
  • MQTT settings interface through miniconf/minimq
  • Multi-binary support
  • DHCP support

Changed

  • Removed JSON-over-TCP interface

Fixed

  • Robust EEPROM MAC address reading slow supply start

v0.4.1 - 2020-06-23

Fixed

  • Fix DAC clr/ldac, SPI speed

v0.4.0 - 2020-06-22

Added

  • Hardware v1.1 only
  • AD9959/Pounder support

Changed

  • HAL port

v0.3.0 - 2020-01-20

Added

  • Red LED handling
  • EEPROM MAC address reading

Changed

  • Panic handler cleanup
  • Dependency updates (smoltcp, rtfm)

v0.2.0 - 2019-05-28

Added

  • Initial basic release
  • Ethernet support
  • IIR filter code
  • ADC and DAC SPI support
  • ADC/DAC timing and interrupts
  • Board configuration, bootstrap

[v0.1.0] - 2019-03-10

Added

  • First bits of code published