HDD/SSD not detected in Raspbian Lite OS in Raspberry pi 4

[Akshar062]

i am using Raspbian lite os with raspberry pi 4 ,i am using usbmount to munt usb but when i insert HDD/SSD it is detecting in lausb but it is not mounting it

is there way to mount HDD or SDD

this is config file

   `

  # Configuration file for the usbmount package, which mounts removable
  # storage devices when they are plugged in and unmounts them when they
  # are removed.
  
  # Change to zero to disable usbmount
  ENABLED=1
  
  # Mountpoints: These directories are eligible as mointpoints for
  # removable storage devices.  A newly plugged in device is mounted on
  # the first directory in this list that exists and on which nothing is
  # mounted yet.
  MOUNTPOINTS="/media/usb0 /media/usb1 /media/usb2 /media/usb3
               /media/usb4 /media/usb5 /media/usb6 /media/usb7"
  
  # Filesystem types: removable storage devices are only mounted if they
  # contain a filesystem type which is in this list.
  FILESYSTEMS="vfat ext2 ext3 ext4 hfsplus ntfs"
  
  #############################################################################
  # WARNING!                                                                  #
  #                                                                           #
  # The "sync" option may not be a good choice to use with flash drives, as   #
  # it forces a greater amount of writing operating on the drive. This makes  #
  # the writing speed considerably lower and also leads to a faster wear out  #
  # of the disk.                                                              #
  #                                                                           #
  # If you omit it, don't forget to use the command "sync" to synchronize the #
  # data on your disk before removing the drive or you may experience data    #
  # loss.                                                                     #
  #                                                                           #
  # It is highly recommended that you use the pumount command (as a regular   #
  # user) before unplugging the device. It makes calling the "sync" command   #
  # and mounting with the sync option unnecessary---this is similar to other  #
  # operating system's "safely disconnect the device" option.                 #
  #############################################################################
  # Mount options: Options passed to the mount command with the -o flag.
  # See the warning above regarding removing "sync" from the options.
  MOUNTOPTIONS="sync,noexec,nodev,noatime,nodiratime"
  
  # Filesystem type specific mount options: This variable contains a space
  # separated list of strings, each which the form "-fstype=TYPE,OPTIONS".
  #
  # If a filesystem with a type listed here is mounted, the corresponding
  # options are appended to those specificed in the MOUNTOPTIONS variable.
  #
  # For example, "-fstype=vfat,gid=floppy,dmask=0007,fmask=0117" would add
  # the options "gid=floppy,dmask=0007,fmask=0117" when a vfat filesystem
  # is mounted.
  FS_MOUNTOPTIONS=""
  
  # If set to "yes", more information will be logged via the syslog
  # facility.
  VERBOSE=no

`

i have added ntfs at end
in
FILESYSTEMS="vfat ext2 ext3 ext4 hfsplus ntfs"