Skip to content

Latest commit

 

History

History
221 lines (157 loc) · 3.2 KB

API.md

File metadata and controls

221 lines (157 loc) · 3.2 KB
Raw

SimpleLMIC API

Include Library

#include <SimpleLMIC.h>

SimpleLMIC ttn;

Begin

Initialize the library.

ttn.begin();

Returns 1 on success, 0 on failure.

Loop

This function need to be on the loop to make the library work properly.

ttn.loop();

Sleep

Sleep the library

ttn.sleep();

End

Stop the library

ttn.end();

Configuration

Pin Mapping

The pin mapping should be set like the arduino-lmic

const lmic_pinmap lmic_pins = {
  .nss = 10,
  .rxtx = LMIC_UNUSED_PIN,
  .rst = LMIC_UNUSED_PIN,
  .dio = {2, 2, 2}
};

Link

Set LoRaWAN link.

ttn.setLink(true);

or

ttn.setLink(false);

Adaptive Data Rate (Adr)

Set LoRaWAN Adaptive Data Rate.

ttn.setAdr(true);

or

ttn.setAdr(false);

Clock Error

Set the clock error percentage. Check the lmic_setclockerror for more information.

ttn.setError(error);
  • error - Set the clock error, defaults to 5

Event Debug

Show the events on the Serial monitor.

ttn.debug(true);

or

ttn.debug(false);

LoRaWAN Channels

Set the Channel of the US region.

ttn.setSubBand(band);
  • band - Set the subband plan, defaults to 2 - (1 to 8)

Over The Air Activation (OTAA)

For OTAA you will use the join().

ttn.setDevEui(devEui);
ttn.setAppEui(appEui);
ttn.setAppKey(appKey);
ttn.join();
ttn.setDevEui(devEui);
ttn.join(appEui, appKey);
ttn.join(devEui, appEui, appKey);
  • devEui - LoRaWAN Device EUI.
  • appEui - LoRaWAN Application EUI.
  • appKey - LoRaWAN App Key.

Activation By Personalization (ABP)

For ABP you will use the personalize().

ttn.personalize(devAddr, nwkSKey, appSKey);
  • devAddr - LoRaWAN Device Address.
  • nwkSKey - LoRaWAN Network Session Key.
  • appSKey - LoRaWAN App Session Key.

Register callback

onMessage

Register a callback function for when a payload is received.

ttn.onMessage(onMessage);

void onMessage(uint8_t *payload, size_t size, uint8_t port) {
 // ...
}
  • onMessage - function to call when a valid payload is received.
    • payload - array with the payload data.
    • size - length of the payload data.
    • port - port of the payload.

Sending data

Writing

Write data to the payload buffer.

ttn.write(byte);

ttn.write(buffer, length);
  • byte - single byte to write to packet

or

  • buffer - data to write to packet
  • length - size of data to write

Returns the number of bytes written.

Note: Other Arduino Print API's can also be used to write data into the packet

Send

ttn.send(port, confirm);
  • port - port number of the payload, defaults to 1
  • confirm - confirm payload, defaults to false

Busy

Check if the LoRaWAN is busy, like waiting the rx1 and rx2, ask request, etc.

void loop() {
    ttn.loop();
    if (!ttn.isBusy())
    {
        ttn.print("hello");
        ttn.send();
    }
}

Link

Check if the LoRaWAN has link.

void loop() {
    ttn.loop();
    if (ttn.isLink())
    {

    }
}