Implement Zicbom, Zicboz (cbo.flush, cbo.inval, cbo.zero)

Note that Zicbop (prefetch hints) does not need to be implemented because all it does is label some existing base instructions as prefetch hints.

Also I have not wired up the enable flags to the emulators because it is rather tedious (and will hopefully be replaced by riscv-config at some point).

Makefile

@@ -57,6 +57,8 @@ SAIL_DEFAULT_INST += riscv_insts_vext_mem.sail
 SAIL_DEFAULT_INST += riscv_insts_vext_mask.sail
 SAIL_DEFAULT_INST += riscv_insts_vext_vm.sail
 SAIL_DEFAULT_INST += riscv_insts_vext_red.sail
+SAIL_DEFAULT_INST += riscv_insts_zicbom.sail
+SAIL_DEFAULT_INST += riscv_insts_zicboz.sail
 
 SAIL_SEQ_INST = $(SAIL_DEFAULT_INST) riscv_jalr_seq.sail
 SAIL_RMEM_INST = $(SAIL_DEFAULT_INST) riscv_jalr_rmem.sail riscv_insts_rmem.sail

c_emulator/riscv_platform.c

@@ -112,6 +112,11 @@ mach_bits plat_rom_size(unit u)
  return rv_rom_size;
 }
 
+mach_bits plat_cache_block_size_exp()
+{
+ return rv_cache_block_size_exp;
+}
+
 // Provides entropy for the scalar cryptography extension.
 mach_bits plat_get_16_random_bits(unit u)
 {

c_emulator/riscv_platform.h

@@ -26,6 +26,8 @@ bool within_phys_mem(mach_bits, sail_int);
 mach_bits plat_rom_base(unit);
 mach_bits plat_rom_size(unit);
 
+mach_bits plat_cache_block_size_exp(unit);
+
 // Provides entropy for the scalar cryptography extension.
 mach_bits plat_get_16_random_bits(unit);
 

c_emulator/riscv_platform_impl.c

@@ -27,6 +27,9 @@ uint64_t rv_ram_size = UINT64_C(0x4000000);
 uint64_t rv_rom_base = UINT64_C(0x1000);
 uint64_t rv_rom_size = UINT64_C(0x100);
 
+// Default 64, which is mandated by RVA22.
+uint64_t rv_cache_block_size_exp = UINT64_C(6);
+
 // Provides entropy for the scalar cryptography extension.
 uint64_t rv_16_random_bits(void)
 {

c_emulator/riscv_platform_impl.h

@@ -31,6 +31,8 @@ extern uint64_t rv_ram_size;
 extern uint64_t rv_rom_base;
 extern uint64_t rv_rom_size;
 
+extern uint64_t rv_cache_block_size_exp;
+
 // Provides entropy for the scalar cryptography extension.
 extern uint64_t rv_16_random_bits(void);
 

c_emulator/riscv_sim.c

@@ -56,6 +56,7 @@ enum {
  OPT_PMP_GRAIN,
  OPT_ENABLE_SVINVAL,
  OPT_ENABLE_ZCB,
+ OPT_CACHE_BLOCK_SIZE,
 };
 
 static bool do_dump_dts = false;
@@ -154,6 +155,7 @@ static struct option options[] = {
 #ifdef SAILCOV
  {"sailcov-file", required_argument, 0, 'c' },
 #endif
+ {"cache-block-size", required_argument, 0, OPT_CACHE_BLOCK_SIZE },
  {0, 0, 0, 0 }
 };
 
@@ -234,6 +236,17 @@ static void read_dtb(const char *path)
  fprintf(stdout, "Read %zd bytes of DTB from %s.\n", dtb_len, path);
 }
 
+// Return log2(x), or -1 if x is not a power of 2.
+static int ilog2(uint64_t x)
+{
+ for (unsigned i = 0; i < sizeof(x) * 8; ++i) {
+ if ((1ull << i) == x) {
+ return i;
+ }
+ }
+ return -1;
+}
+
 /**
  * Parses the command line arguments and returns the argv index for the first
  * ELF file that should be loaded. As getopt transforms the argv array, all
@@ -247,6 +260,7 @@ static int process_args(int argc, char **argv)
  uint64_t ram_size = 0;
  uint64_t pmp_count = 0;
  uint64_t pmp_grain = 0;
+ uint64_t block_size_exp = 0;
  while (true) {
  c = getopt_long(argc, argv,
  "a"
@@ -414,6 +428,17 @@ static int process_args(int argc, char **argv)
  case OPT_TRACE_OUTPUT:
  trace_log_path = optarg;
  fprintf(stderr, "using %s for trace output.\n", trace_log_path);
+ case OPT_CACHE_BLOCK_SIZE:
+ block_size_exp = ilog2(atol(optarg));
+
+ if (block_size_exp < 0 || block_size_exp > 12) {
+ fprintf(stderr, "invalid cache-block-size '%s' provided.\n", optarg);
+ exit(1);
+ }
+
+ fprintf(stderr, "setting cache-block-size to 2^%" PRIu64 " = %u B\n",
+ block_size_exp, 1 << block_size_exp);
+ rv_cache_block_size_exp = block_size_exp;
  break;
  case '?':
  print_usage(argv[0], 1);

handwritten_support/riscv_extras.lem

@@ -193,6 +193,10 @@ val plat_rom_size : unit -> bitvector
 let plat_rom_size () = []
 declare ocaml target_rep function plat_rom_size = `Platform.rom_size`
 
+val plat_cache_block_size_exp : unit -> bitvector
+let plat_cache_block_size_exp () = []
+declare ocaml target_rep function plat_cache_block_size_exp = `Platform.cache_block_size_exp`
+
 val plat_clint_base : unit -> bitvector
 let plat_clint_base () = []
 declare ocaml target_rep function plat_clint_base = `Platform.clint_base`

handwritten_support/riscv_extras_sequential.lem

@@ -173,6 +173,10 @@ val plat_rom_size : forall 'a. Size 'a => unit -> bitvector 'a
 let plat_rom_size () = wordFromInteger 0
 declare ocaml target_rep function plat_rom_size = `Platform.rom_size`
 
+val plat_cache_block_size_exp : unit -> integer
+let plat_cache_block_size_exp () = wordFromInteger 0
+declare ocaml target_rep function plat_cache_block_size_exp = `Platform.cache_block_size_exp`
+
 val plat_clint_base : forall 'a. Size 'a => unit -> bitvector 'a
 let plat_clint_base () = wordFromInteger 0
 declare ocaml target_rep function plat_clint_base = `Platform.clint_base`

model/riscv_insts_zicbom.sail

@@ -0,0 +1,110 @@
+/*=======================================================================================*/
+/* This Sail RISC-V architecture model, comprising all files and */
+/* directories except where otherwise noted is subject the BSD */
+/* two-clause license in the LICENSE file. */
+/* */
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*=======================================================================================*/
+
+// Cache Block Operations - Management
+//
+// Note that the CBOP prefetch instructions are existing base instructions that
+// are just defined to be hints, so there is not need to add any code for them
+// (since this model has no caches to prefetch into and the encodings already
+// exist).
+
+function cbo_clean_flush_enabled(p : Privilege) -> bool = feature_enabled_for_priv(p, menvcfg.CBCFE()[0], senvcfg.CBCFE()[0])
+function cbo_inval_enabled(p : Privilege) -> bool = feature_enabled_for_priv(p, menvcfg.CBIE()[0], senvcfg.CBIE()[0])
+function cbo_inval_as_inval(p : Privilege) -> bool = feature_enabled_for_priv(p, menvcfg.CBIE()[1], senvcfg.CBIE()[1])
+
+/* ****************************************************************** */
+union clause ast = RISCV_ZICBOM : (cbop_zicbom, regidx)
+
+mapping encdec_cbop : cbop_zicbom <-> bits(12) = {
+ CBO_CLEAN <-> 0b000000000001,
+ CBO_FLUSH <-> 0b000000000010,
+ CBO_INVAL <-> 0b000000000000
+}
+
+mapping clause encdec = RISCV_ZICBOM(cbop, rs1) if haveZicbom()
+ <-> encdec_cbop(cbop) @ rs1 @ 0b010 @ 0b00000 @ 0b0001111 if haveZicbom()
+
+mapping cbop_mnemonic : cbop_zicbom <-> string = {
+ CBO_CLEAN <-> "cbo.clean",
+ CBO_FLUSH <-> "cbo.flush",
+ CBO_INVAL <-> "cbo.inval"
+}
+
+mapping clause assembly = RISCV_ZICBOM(cbop, rs1)
+ <-> cbop_mnemonic(cbop) ^ spc() ^ "(" ^ opt_spc() ^ reg_name(rs1) ^ opt_spc() ^ ")"
+
+val process_clean_inval : (regidx, cbop_zicbom) -> Retired
+function process_clean_inval(rs1, cbop) = {
+ let rs1_val = X(rs1);
+ let cache_block_size_exp = plat_cache_block_size_exp();
+ let cache_block_size = 2 ^ cache_block_size_exp;
+
+ // Offset from the beginning of the cache block.
+ let offset = (rs1_val & ~(zero_extend(ones(cache_block_size_exp)))) - rs1_val;
+
+ // TODO: This is incorrect since CHERI only requires at least one byte
+ // to be in bounds here, whereas `ext_data_get_addr()` checks that all bytes
+ // are in bounds. We will need to add a new function, parameter or access type.
+ match ext_data_get_addr(rs1, offset, Read(Data), cache_block_size) {
+ Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); RETIRE_FAIL },
+ Ext_DataAddr_OK(vaddr) => {
+ let res: option(ExceptionType) = match translateAddr(vaddr, Read(Data)) {
+ TR_Address(paddr, _) => {
+ // "A cache-block management instruction is permitted to access the
+ // specified cache block whenever a load instruction or store instruction
+ // is permitted to access the corresponding physical addresses. If
+ // neither a load instruction nor store instruction is permitted to
+ // access the physical addresses, but an instruction fetch is permitted
+ // to access the physical addresses, whether a cache-block management
+ // instruction is permitted to access the cache block is UNSPECIFIED."
+ //
+ // In this implementation we currently don't allow access for fetches.
+ let exc_read = phys_access_check(Read(Data), cur_privilege, paddr, cache_block_size);
+ let exc_write = phys_access_check(Write(Data), cur_privilege, paddr, cache_block_size);
+ match (exc_read, exc_write) {
+ (Some(e0), Some(e1)) => Some(e1),
+ _ => None(),
+ }
+ },
+ TR_Failure(e, _) => Some(e)
+ };
+ // "If access to the cache block is not permitted, a cache-block management
+ // instruction raises a store page fault or store guest-page fault exception
+ // if address translation does not permit any access or raises a store access
+ // fault exception otherwise."
+ match res {
+ // The model has no caches so there's no action required.
+ None() => RETIRE_SUCCESS,
+ Some(e) => {
+ let e : ExceptionType = match e {
+ E_Load_Access_Fault() => E_SAMO_Access_Fault(),
+ E_SAMO_Access_Fault() => E_SAMO_Access_Fault(),
+ E_Load_Page_Fault() => E_SAMO_Page_Fault(),
+ E_SAMO_Page_Fault() => E_SAMO_Page_Fault(),
+ // No other exceptions should be generated since we're not checking
+ // for fetch access and it's can't be misaligned.
+ _ => internal_error(__FILE__, __LINE__, "unexpected exception for cmo.clean/inval"),
+ };
+ handle_mem_exception(vaddr, e);
+ RETIRE_FAIL
+ }
+ }
+ }
+ }
+}
+
+function clause execute(RISCV_ZICBOM(cbop, rs1)) = {
+ if (cbop == CBO_CLEAN | cbop == CBO_FLUSH) & cbo_clean_flush_enabled(cur_privilege) then {
+ process_clean_inval(rs1, cbop)
+ } else if (cbop == CBO_INVAL) & cbo_inval_enabled(cur_privilege) then {
+ process_clean_inval(rs1, if cbo_inval_as_inval(cur_privilege) then CBO_INVAL else CBO_FLUSH)
+ } else {
+ handle_illegal();
+ RETIRE_FAIL
+ }
+}

model/riscv_insts_zicboz.sail

@@ -0,0 +1,68 @@
+/*=======================================================================================*/
+/* This Sail RISC-V architecture model, comprising all files and */
+/* directories except where otherwise noted is subject the BSD */
+/* two-clause license in the LICENSE file. */
+/* */
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*=======================================================================================*/
+
+// Cache Block Operations - Zero
+//
+// Note that the CBOP prefetch instructions are existing base instructions that
+// are just defined to be hints, so there is not need to add any code for them
+// (since this model has no caches to prefetch into and the encodings already
+// exist).
+
+function cbo_zero_enabled(p : Privilege) -> bool = feature_enabled_for_priv(p, menvcfg.CBZE()[0], senvcfg.CBZE()[0])
+
+/* ****************************************************************** */
+union clause ast = RISCV_ZICBOZ : (regidx)
+
+mapping clause encdec = RISCV_ZICBOZ(rs1) if haveZicboz()
+ <-> 0b000000000100 @ rs1 @ 0b010 @ 0b00000 @ 0b0001111 if haveZicboz()
+
+mapping clause assembly = RISCV_ZICBOZ(rs1)
+ <-> "cbo.zero" ^ spc() ^ "(" ^ opt_spc() ^ reg_name(rs1) ^ opt_spc() ^ ")"
+
+function clause execute(RISCV_ZICBOZ(rs1)) = {
+ if cbo_zero_enabled(cur_privilege) then {
+ let rs1_val = X(rs1);
+ let cache_block_size_exp = plat_cache_block_size_exp();
+ let cache_block_size = 2 ^ cache_block_size_exp;
+
+ // Offset from the beginning of the cache block.
+ let offset = (rs1_val & ~(zero_extend(ones(cache_block_size_exp)))) - rs1_val;
+
+ // TODO: This may not be correct since CHERI may treat CBO operations
+ // differently to normal accesses with respect to bounds checks.
+ match ext_data_get_addr(rs1, offset, Write(Data), cache_block_size) {
+ Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); RETIRE_FAIL },
+ Ext_DataAddr_OK(vaddr) => {
+ // "An implementation may update the bytes in any order and with any granularity
+ // and atomicity, including individual bytes."
+ //
+ // This implementation does a single atomic write.
+ match translateAddr(vaddr, Write(Data)) {
+ TR_Failure(e, _) => { handle_mem_exception(vaddr, e); RETIRE_FAIL },
+ TR_Address(paddr, _) => {
+ let eares : MemoryOpResult(unit) = mem_write_ea(paddr, cache_block_size, false, false, false);
+ match (eares) {
+ MemException(e) => { handle_mem_exception(vaddr, e); RETIRE_FAIL },
+ MemValue(_) => {
+ let res : MemoryOpResult(bool) = mem_write_value(paddr, cache_block_size, zeros(), false, false, false);
+ match (res) {
+ MemValue(true) => RETIRE_SUCCESS,
+ MemValue(false) => internal_error(__FILE__, __LINE__, "store got false from mem_write_value"),
+ MemException(e) => { handle_mem_exception(vaddr, e); RETIRE_FAIL }
+ }
+ }
+ }
+ }
+ }
+ },
+ }
+ } else {
+ handle_illegal();
+ RETIRE_FAIL
+ }
+}

model/riscv_platform.sail

@@ -26,6 +26,9 @@ val elf_entry = {
  c: "elf_entry"
 } : unit -> int
 
+// Cache block size is 2^cache_block_size_exp. Max 4096.
+val plat_cache_block_size_exp = {c: "plat_cache_block_size_exp", ocaml: "Platform.cache_block_size_exp", interpreter: "Platform.cache_block_size_exp", lem: "plat_cache_block_size_exp"} : unit -> range(0, 12)
+
 /* Main memory */
 val plat_ram_base = {c: "plat_ram_base", ocaml: "Platform.dram_base", interpreter: "Platform.dram_base", lem: "plat_ram_base"} : unit -> xlenbits
 val plat_ram_size = {c: "plat_ram_size", ocaml: "Platform.dram_size", interpreter: "Platform.dram_size", lem: "plat_ram_size"} : unit -> xlenbits

model/riscv_sys_control.sail

@@ -101,6 +101,14 @@ function check_CSR_access(csrrw, csrpr, p, isWrite) =
 function check_TVM_SATP(csr : csreg, p : Privilege) -> bool =
  not(csr == 0x180 & p == Supervisor & mstatus[TVM] == 0b1)
 
+// There are several features that are controlled by machine/supervisor enable
+// bits (m/senvcfg, m/scounteren, etc.). This abstracts that logic.
+function feature_enabled_for_priv(p : Privilege, machine_enable_bit : bit, supervisor_enable_bit : bit) -> bool = match p {
+ Machine => true,
+ Supervisor => machine_enable_bit == bitone,
+ User => machine_enable_bit == bitone & (not(haveSupMode()) | supervisor_enable_bit == bitone),
+}
+
 function check_Counteren(csr : csreg, p : Privilege) -> bool =
  match(csr, p) {
  (0xC00, Supervisor) => mcounteren[CY] == 0b1,

model/riscv_sys_regs.sail

@@ -108,6 +108,14 @@ val sys_enable_vext = {c: "sys_enable_vext", ocaml: "Platform.enable_vext", _: "
 /* whether misa.b was enabled at boot */
 val sys_enable_bext = {c: "sys_enable_bext", ocaml: "Platform.enable_bext", _: "sys_enable_bext"} : unit -> bool
 
+// CBO extensions. Zicbop cannot be enabled/disabled because it has no effect
+// at all on this model.
+// TODO: Add command line flags.
+// val sys_enable_zicbom = {c: "sys_enable_zicbom", ocaml: "Platform.enable_zicbom", _: "sys_enable_zicbom"} : unit -> bool
+// val sys_enable_zicboz = {c: "sys_enable_zicboz", ocaml: "Platform.enable_zicboz", _: "sys_enable_zicboz"} : unit -> bool
+function sys_enable_zicbom() -> bool = true
+function sys_enable_zicboz() -> bool = true
+
 /* This function allows an extension to veto a write to Misa
  if it would violate an alignment restriction on
  unsetting C. If it returns true the write will have no effect. */
@@ -175,6 +183,10 @@ function haveZicond() -> bool = true
 /* Zabha extension support */
 function haveZabha() -> bool = true
 
+/* Cache Management Operations extension support. */
+function haveZicbom() -> bool = sys_enable_zicbom()
+function haveZicboz() -> bool = sys_enable_zicboz()
+
 /*
  * Illegal values legalized to least privileged mode supported.
  * Note: the only valid combinations of supported modes are M, M+U, M+S+U.

model/riscv_types.sail

@@ -335,6 +335,8 @@ enum amoop = {AMOSWAP, AMOADD, AMOXOR, AMOAND, AMOOR,
  AMOMIN, AMOMAX, AMOMINU, AMOMAXU} /* AMO ops */
 enum csrop = {CSRRW, CSRRS, CSRRC} /* CSR ops */
 
+enum cbop_zicbom = {CBO_CLEAN, CBO_FLUSH, CBO_INVAL} /* Zicbom ops */
+
 enum brop_zba = {RISCV_SH1ADD, RISCV_SH2ADD, RISCV_SH3ADD}
 
 enum brop_zbb = {RISCV_ANDN, RISCV_ORN, RISCV_XNOR, RISCV_MAX,

ocaml_emulator/platform.ml

@@ -105,6 +105,8 @@ let rom_size () = arch_bits_of_int !rom_size_ref
 let dram_base () = arch_bits_of_int64 P.dram_base
 let dram_size () = arch_bits_of_int64 !P.dram_size_ref
 
+let cache_block_size_exp () = Big_int.of_int64 !P.cache_block_size_exp_ref
+
 let clint_base () = arch_bits_of_int64 P.clint_base
 let clint_size () = arch_bits_of_int64 P.clint_size