Skip to content

Latest commit

 

History

History
197 lines (168 loc) · 7.18 KB

README.md

File metadata and controls

197 lines (168 loc) · 7.18 KB
Raw

cura-build

This repository contains build scripts used to build Cura and all dependencies from scratch.

OS X

  1. Install CMake (available via homebrew or cmake.org)
  2. Install latest version of Xcode.
  3. On Mac OS X > 10.10, execute command: brew link openssl --force
  4. Because Fortran is necessary: brew install gcc
  5. Run these commands:
git clone git@github.com:Ultimaker/cura-build.git
cd cura-build
mkdir build
cd build
cmake ..
make

Windows

On Windows, the following dependencies are needed for building:

  • git for windows (https://git-for-windows.github.io/)
    • The git command should be available on your %PATH%. Make sure that the cmd directory in the git for windows installation directory is on the %PATH% and not its bin directory, otherwise mingw32 will complain about sh.exe being on the path.
  • CMake (http://www.cmake.org/)
    • Once CMake is installed make sure it is available on your %PATH%. Check this by running cmake --version in the Windows console.
  • MinGW-W64 >= 4.9.04 (https://wiki.qt.io/MinGW-64-bit)
    • Once installed, its bin directory should be available on your %PATH%. Test this by running mingw32-make --version in the Windows console.
    • MinGW can be installed on different ways, but these were tested (without guarentees):
      • MinGW w64 installer (32-/64bit): Install the correct target architecture and make sure you choose:
        • Version := 4.9.3
        • Architecture := i686 (here for 32bit)
        • Threads := posix
        • Exception := dwarf
        • Build revision := 1
      • Qt5 Installer (32bit only): You can install "MinGW 4.9.2" using their "Maintenance Tool" as a component from the category "Tools"
      • When looking for other resources, make sure you download the posix flavour of MinGW. It is the only version, which is C++11 compatible (for more info take a look at the Qt docs).
  • Python 3.5 (http://python.org/)
    • NOTE: using Python 3.5 is currently untested on Windows
  • NumPy (http://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy)
    • NOTE: make sure to get the NON-MKL version!
  • SciPy (http://www.lfd.uci.edu/~gohlke/pythonlibs/#scipy)
  • Py2Exe (https://pypi.python.org/pypi/py2exe/0.9.2.0/#downloads)
    • The easiest way to install this is to run the command pip install py2exe. The executable build_exe.exe should now be in your <python dir>/Scripts directory. You may have to add <python dir>/Scripts to you %PATH%.
  • Numpy-STL (https://pypi.python.org/pypi/numpy-stl)
    • Also the easiest way to install is via pip3 install stl.
  • Numpy-STL (https://pypi.python.org/pypi/zeroconf)
    • Again the easiest way to install is via pip3 install zeroconf.
  • Microsoft Visual Studio 2015 (community edition): Go to "custom installation" and choose:
    • Programming languages:
      • Visual c++ (all)
      • Python Tools for Visual Studio (Nov 2015)
    • Windows & Web Development:
      • Universal Windows App Development Tools:
        • Tools 1.2
        • Windows 10 SDK 10.0.10586
        • Windows 10 SDK 10.0.10240
  • NSIS 3 (http://nsis.sourceforge.net/Main_Page)
    • This application is neeeded to create the installer

Make sure these dependencies are available from your path.

Additionally, for 32-bit builds:

[build]
compiler=mingw32

For 64-bit builds:

  • PyQt 5.4 (https://riverbankcomputing.com/software/pyqt/download5, Building PyQt currently fails using MinGW 64-bit)
  • Install protobuf.wheel found in cura-build-binaries (TODO: create cura-build-binaries repo)
  • Create empty __init__.py in c:\Python34\Lib\site-packages\google (TODO: make it part of the proto.wheel installation)
REM 32-bit
git clone git@github.com:Ultimaker/cura-build.git
cd cura-build
mkdir build
cd build
..\env_win32.bat
cmake -G "MinGW Makefiles" ..
mingw32-make
mingw32-make package
REM 64-bit
git clone git@github.com:Ultimaker/cura-build.git
cd cura-build
mkdir build
cd build
..\env_win64.bat
cmake -G "MinGW Makefiles" -DBUILD_64BIT:BOOL=ON ..
mingw32-make
mingw32-make package

Before make package - copy arduino to cura-build/

Ubuntu/Linux

cura-build can build Ubuntu/Debian packages of Cura.

Dependencies:

  • python3 (>= 3.5.0)
  • python3-dev (>= 3.5.0)
  • python3-pyqt5 (>= 5.6.0)
  • python3-pyqt5.qtopengl (>= 5.6.0)
  • python3-pyqt5.qtquick (>= 5.6.0)
  • python3-pyqt5.qtsvg (>= 5.6.0)
  • python3-numpy (>= 1.8.0)
  • python3-serial (>= 2.6)
  • python3-opengl (>= 3.0)
  • python3-setuptools
  • python3-dev
  • qml-module-qtquick2 (>= 5.6.0)
  • qml-module-qtquick-window2 (>= 5.6.0)
  • qml-module-qtquick-layouts (>= 5.6.0)
  • qml-module-qtquick-dialogs (>= 5.6.0)
  • qml-module-qtquick-controls (>= 5.6.0)
  • libxcb1-dev
  • libx11-dev
  • zlib1g
  • build-essential
  • pkg-config
  • cmake
  • gfortran

To build, make sure these dependencies are installed, then clone this repository and run the following commands from your clone:

sudo apt-get install gfortran python3 python3-dev python3-pyqt5 python3-pyqt5.qtopengl python3-pyqt5.qtquick python3-pyqt5.qtsvg python3-numpy python3-serial python3-opengl python3-setuptools qml-module-qtquick2 qml-module-qtquick-window2 qml-module-qtquick-layouts qml-module-qtquick-dialogs qml-module-qtquick-controls gfortran pkg-config libxcb1-dev libx11-dev
git clone http://github.com/Ultimaker/cura-build.git
cd cura-build
mkdir build
cd build
cmake ..
make
make package

CentOS/Linux

cura-build can build CentOS/RHEL packages of Cura.

Dependencies:

  • gcc-gfortran
  • python34.x86_64
  • python34-devel.x86_64
  • python34-numpy.x86_64
  • pyserial.noarch
  • PyOpenGL.noarch
  • python34-setuptools.noarch
  • wxPython.x86_64
  • libstdc++-static.x86_64
  • libstdc++-devel.x86_64
  • openssl.x86_64
  • openblas-devel.x86_64
  • python34-numpy-f2py.x86_64

To build, make sure these dependencies are installed, then clone this repository and run the following commands from your clone:

sudo yum install gcc-gfortran python34.x86_64 python34-devel.x86_64 python34-numpy.x86_64 pyserial.noarch PyOpenGL.noarch python34-setuptools.noarch wxPython.x86_64 libstdc++-static.x86_64 libstdc++-devel.x86_64 openssl.x86_64 openblas-devel.x86_64 python34-numpy-f2py.x86_64
  1. download and install scipy from https://github.com/scipy/scipy/releases be sure to use python 3.5, eg. using sudo python3 setup.py 2. install (version in repository is for python 2.7)
  2. download and install CMake from https://cmake.org/download/ and configure CMake to use ssl
  3. download and install Qt5 from https://www.qt.io/download/
  4. download and install PyQt5 from https://www.riverbankcomputing.com/software/pyqt/download5
  5. download and install sip from https://www.riverbankcomputing.com/software/sip/download make sure the verion is 4.18 or newer

Alternative method for installing python at: https://edwards.sdsu.edu/research/installing-python3-4-and-the-scipy-stack-on-centos/ . Make sure, that the PYTHONPATH can find dist-packages.

git clone http://github.com/Ultimaker/cura-build.git
cd cura-build
mkdir build
cd build
cmake ..
make
make package