tunsocks is a user-level SOCKS, HTTP, and port forwarding proxy for use with VPNs that typically interact with tun devices. Rather than passing bytes to and from the tun device, they can pass the data to and from this user-level program. tunsocks is implemented using lwIP.
Additionally, tunsocks provides connection sharing via NAT.
tunsocks has been tested with OpenConnect:
http://www.infradead.org/openconnect/
usage: tunsocks
-L [bind_address:]bind_port:host_address:host_port
-D [bind_address:]bind_port SOCKS4a/5 proxy
-H [bind_address:]bind_port HTTP proxy
-P proxy_pac_file:bind_port HTTP server for proxy.pac
-R bind_port:host_address:host_port
-g Allow non-local clients (command line compatibility for ocproxy)
-k keep alive interval (seconds)
-m mtu (env INTERNAL_IP4_MTU)
-s domain_search[,domain_search,...] (env CISCO_DEF_DOMAIN)
-d dns,[dns,...] (env INTERNAL_IP4_DNS)
-i ip address (env INTERNAL_IP4_ADDRESS)
-n netmask
-G gateway
-S (Use slirp interface instead VPN, useful for testing)
-l Add deLay (in ms) to inbound/outbound packets (useful for testing)
-o DrOp probability ([0.0..1.0]) for inbound/outbound (useful for testing)
-p pcap_file[:netif] (Default netif 'fd', VPN input)
-u port (UDP listener port of TAP NAT with no length header, netif=ut)
-U port (UDP listener port of TAP NAT with 2 byte length header, netif=ut)
-v VDE path (Connect NAT to a VDE switch. netif=vp)
-V VDE path (Expose NAT via a reduced functionality VDE switch. netif=vs)
-t tun name (Expose NAT via a PTP TUN device. netif=tu)
-T tap name (Expose NAT via a TAP device with DHCP. netif=ta)
Some options also accept input through environmental veriables (see env above). By default, tunsocks accepts network traffic on stdin, and outputs network traffic on stdout. The "VPNFD" environmental variable can be used to pass an alternate fd.
-L [bind_address:]port:host:hostport
Listen on a local port and optional bind address. When a connection
is accepted, tunsocks makes a connection on the remote network to
host:hostport and then pipes the two connections together. If
host port is not specified, it defaults to port.
-D [bind_address:]port
Start a SOCKS proxy on a local port and optional bind address. The
SOCKS proxy supports SOCKS 4, 4A, and 5. The BIND command is
accepted. If bind_address is not specified, it defaults to
localhost.
-H [bind_address:]port
Start a http/https proxy on a local port and optional bind address.
-P proxy_pac_file:port
Start a http server on localhost at the given port serving up the
specified proxy PAC file. The server will respond to requests for
'/', '/proxy.pac', and '/wpad.dat'. The file is re-read each time
it is requested.
-R port:host:hostport
tunsocks listens on the specified port on the remote network. When
a connection is accepted, tunsocks connects to host:hostport on
the local network and then pipes the two connections together. If
hostport is not specified, it defaults to port, if host is not
specified, it defaults to localhost.
-k keep alive interval (seconds)
TCP keepalive options for all connections on the remote network.
-m mtu (env INTERNAL_IP4_MTU)
MTU used for the remote network.
-s domain_search[,domain_search,...] (env CISCO_DEF_DOMAIN)
Domain search order. Follows the same order as resolv.conf(5) search
with ndots fixed at 1.
-d dns,[dns,...] (env INTERNAL_IP4_DNS)
DNS servers for the remote network.
-i ip address (env INTERNAL_IP4_ADDRESS)
IP address to use on the remote network.
-n netmask
Netmask to use on the remote network.
-g gateway
IP gateway to use on the remote network.
-S Use slirp interface instead VPN for outbound connection. This uses the host's IP stack to make outbound connections.
-l delay_ms
Add a delay (in ms) to inbound/outbound packets (useful for testing).
-o probability
Set a probability for dropping packets for inbound/outbound (useful
for testing).
-p pcap_file[:netif]
If specified, all traffic is saved to the specified file in pcap
format. The default interface is 'fd', which is the VPN interface.
-u port
Provides a NAT connection to the VPN via raw packets. The network
provides a DHCP server that assigns clients an IP address, subnet,
default route, DNS server, and domain names appropriately. The network
is 10.0.4.0/24.
tunsocks will listen for raw Ethernet packets on the given UDP port.
Whenever it receives a packet, it will associated the sender's hardware
address with the sender's IP and port. Any packets destined for the
sender's IP address will be returned. Any packets destined for the
broadcast address will be sent to all current clients.
The netif name for use with -p i- 'ut'.
-U port
Like -u, but all packets include a 2 byte big-endian length header.
-v VDE path
Like -u, but connects to the given VDE switch. The network is
10.0.5.0/24. The netif name is 'vp'.
-V VDE path
Like -u, but emulates a VDE switch. The network is 10.0.6.0/24. The
netif name is 'vs'.
-T tap name
Like -u but sends and receives packets via a supplied TAP device. The
network is 10.0.7.0/24. The netif name is 'ta'.
-t tun name
Like -T but operates with TUN devices at the IP layer. This operates
as a point-to-point interface and does not supply a DHCP server. The
client must correctly configure IP and DNS settings. The IP address
of the point-to-point device is 10.0.8.1. The netif name is 'tu'.
openconnect --script-tun --script "tunsocks -D 8080 -R ssh \
-L 8888:webproxy.example.com:80" vpn.example.com
tunsocks is configured to start a SOCKS server on localhost at port 8080. SSH connections on the remote network to our given IP address will connect to our local SSH server. A HTTP proxy is available on the remote network for accessing specific hosts, it is accessible via localhost:8888. Openconnect sets the other necessary parameters via environmental variables.
tsocks can easily wrap applications via an LD_PRELOAD so that network requests instead travel via a proxy.
/etc/tsocks.conf: server = 127.0.0.1 server_type = 5 server_port = 8080
tsocks nc 10.15.12.12 55
This configures git to use the localhost:8080 SOCKS proxy for connection to git.example.com.
~/.gitconfig: [core] gitproxy=/home/joeuser/bin/git-proxy-wrapper for git.example.com
~/bin/git-proxy-wrapper: exec socat STDIO SOCKS4A:localhost:$1:$2,socksport=8080
This utilizes the localhost:8080 SOCKS proxy for any ssh connections in the *.intranet.example.com domain
~/.ssh/config: Host *.intranet.example.com ProxyCommand socat - SOCKS4A:localhost:%h:%p,socksport=8080
Although web browsers and general desktop applications can be configured to use a single proxy easily, it is much more convenient to utilize a proxy.pac file. A proxy.pac file allows sets of rules for determining which connections should utilize the proxy.
function FindProxyForURL(url, host) {
// This rule allows single word domain names, such as "time" to
// resolve via the VPN. This is common on corporate intranets.
// tunsocks utilizes the domain search list in this case
if (isPlainHostName(host))
return "SOCKS5 127.0.0.1:8080";
// proxy.pac can be used to easily funnel entire domains
if (dnsDomainIs(host, ".intranet.example.com") ||
dnsDomainIs(host, ".documents.example.com"))
return "SOCKS5 127.0.0.1:8080";
// Or single hosts
if (host == "passwords.example.com" || host == "10.55.22.55")
return "SOCKS5 127.0.0.1:8080";
// This is a slightly more complex example where certain hosts on the
// intranet are only accessible by going through a web proxy available
// via the VPN. A rule '-L 8888:webproxy.example.com:80' is added to
// the tunsocks command line options. The following proxy.pac rule then
// forwards requests for the given domain to that webproxy
if (dnsDomainIs(host, "*.local.example.com"))
return "PROXY localhost:8888";
// Everything else should access the Internet directly, without the
// VPN
return "DIRECT";
}
proxy.pac files can support a wide variety of configurations, even multiplexing between multiple VPN connections. A proxy.pac file is generally assigned under the application or system proxy configuration page by selecting 'Automatic' and then using 'file:///path/to/proxy.pac' in the 'Configuration URL' field.
Multiple methods can be used with QEMU, but the simplest is the UDP interface:
For QEMU:
-nic socket,udp=127.0.0.1:22222,localaddr=127.0.0.1:22223,mac=52:54:00:12:34:56
For tunsocks:
-u 22222
Note that different instances of QEMU should supply different localaddr ports.
Using the NAT interface with Vagrant is a little more complex as Vagrant requires a working interface to the host for ssh access:
vb.customize ["modifyvm", :id, "--nic1", "generic"]
vb.customize ["modifyvm", :id, "--nicgenericdrv1", "UDPTunnel"]
vb.customize ["modifyvm", :id, "--nicproperty1", "dest=127.0.0.1"]
vb.customize ["modifyvm", :id, "--nicproperty1", "dport=22222"]
vb.customize ["modifyvm", :id, "--nic2", "nat"]
vb.customize ["modifyvm", :id, "--natpf2", "ssh,tcp,127.0.0.1,2222,,22"]
The above sets up two interfaces, one for the primary connection that uses the UDP NAT interface of tunsocks, and a second interface for ssh access.
Compiling tunsocks is fairly easy one. You need to clone and initialize its git modules using following commands
git clone https://github.com/russdill/tunsocks
git submodule init
git submodule update
Then you need to make sure all prerequisites are installed
libeventautotoolsmake
For compiling the code you just need to run:
./autogen.sh
./configure
make
tunsocks was written by Russ Dill russ.dill@gmail.com with inspiration from ocproxy by David Edmondson dme@dme.org and Kevin Cernekee cernekee@gmail.com
tunsocks is complied into and licensed under the same license as lwIP. For a copy of the license, see lwip/COPYING.