README.md

Remote-Control-Room-Measuring-Robot

This program lets you measure any room using the TI-RSLK

Link to project page: https://www.hackster.io/saaketporay/remote-control-room-measuring-robot-bffdfc

1. Follow this guide to make a remote controlled TI-RSLK

https://www.hackster.io/saaketporay/how-to-control-the-ti-rslk-using-a-remote-controller-f64be1

2. Connect pin 5 (P4.1) to ch 5 on your receiver

Follow the previous guide to see how the Launchpad is connected to the receiver

3. Connect the ultrasonic sensor as shown

TRIG pin connects to pin 10 (P6.4) ECHO pin connects to pin 9 (P6.5)

4. Your robot should now look like this

Data is sent via USB to a computer. Raspberry Pi could be used for a fully wireless robot. However in this demo- I opted for a wired connection to my laptop.

5. Demo

https://youtu.be/ZLPSeT_Ow_8