bcm2837-lan78xx-fixes.patch

From b23d39c166ca3ed30a2a0a4c8ba4cf29677eed83 Mon Sep 17 00:00:00 2001
From: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Date: Wed, 11 Apr 2018 20:36:36 +0530
Subject: [PATCH 1/9] lan78xx: PHY DSP registers initialization to address EEE
 link drop issues with long cables

The patch is to configure DSP registers of PHY device
to handle Gbe-EEE failures with >40m cable length.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/microchip.c  | 178 ++++++++++++++++++++++++++++++++++-
 include/linux/microchipphy.h |   8 ++
 2 files changed, 185 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 0f293ef28935..a97ac8c12c4c 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -20,6 +20,7 @@
 #include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/microchipphy.h>
+#include <linux/delay.h>
 
 #define DRIVER_AUTHOR	"WOOJUNG HUH <woojung.huh@microchip.com>"
 #define DRIVER_DESC	"Microchip LAN88XX PHY driver"
@@ -30,6 +31,16 @@ struct lan88xx_priv {
 	__u32	wolopts;
 };
 
+static int lan88xx_read_page(struct phy_device *phydev)
+{
+	return __phy_read(phydev, LAN88XX_EXT_PAGE_ACCESS);
+}
+
+static int lan88xx_write_page(struct phy_device *phydev, int page)
+{
+	return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page);
+}
+
 static int lan88xx_phy_config_intr(struct phy_device *phydev)
 {
 	int rc;
@@ -66,6 +77,150 @@ static int lan88xx_suspend(struct phy_device *phydev)
 	return 0;
 }
 
+static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
+			      u32 data)
+{
+	int val, save_page, ret = 0;
+	u16 buf;
+
+	/* Save current page */
+	save_page = phy_save_page(phydev);
+	if (save_page < 0) {
+		pr_warn("Failed to get current page\n");
+		goto err;
+	}
+
+	/* Switch to TR page */
+	lan88xx_write_page(phydev, LAN88XX_EXT_PAGE_ACCESS_TR);
+
+	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
+			  (data & 0xFFFF));
+	if (ret < 0) {
+		pr_warn("Failed to write TR low data\n");
+		goto err;
+	}
+
+	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
+			  (data & 0x00FF0000) >> 16);
+	if (ret < 0) {
+		pr_warn("Failed to write TR high data\n");
+		goto err;
+	}
+
+	/* Config control bits [15:13] of register */
+	buf = (regaddr & ~(0x3 << 13));/* Clr [14:13] to write data in reg */
+	buf |= 0x8000; /* Set [15] to Packet transmit */
+
+	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
+	if (ret < 0) {
+		pr_warn("Failed to write data in reg\n");
+		goto err;
+	}
+
+	usleep_range(1000, 2000);/* Wait for Data to be written */
+	val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
+	if (!(val & 0x8000))
+		pr_warn("TR Register[0x%X] configuration failed\n", regaddr);
+err:
+	return phy_restore_page(phydev, save_page, ret);
+}
+
+static void lan88xx_config_TR_regs(struct phy_device *phydev)
+{
+	int err;
+
+	/* Get access to Channel 0x1, Node 0xF , Register 0x01.
+	 * Write 24-bit value 0x12B00A to register. Setting MrvlTrFix1000Kf,
+	 * MrvlTrFix1000Kp, MasterEnableTR bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x0F82]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x06.
+	 * Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
+	 * SSTrKp1000Mas bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x168C]\n");
+
+	/* Get access to Channel b'10, Node b'1111, Register 0x11.
+	 * Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
+	 * bits
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x17A2]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x10.
+	 * Write 24-bit value 0xEEFFDD to register. Setting
+	 * eee_TrKp1Long_1000, eee_TrKp2Long_1000, eee_TrKp3Long_1000,
+	 * eee_TrKp1Short_1000,eee_TrKp2Short_1000, eee_TrKp3Short_1000 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x16A0]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x13.
+	 * Write 24-bit value 0x071448 to register. Setting
+	 * slv_lpi_tr_tmr_val1, slv_lpi_tr_tmr_val2 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x16A6]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x12.
+	 * Write 24-bit value 0x13132F to register. Setting
+	 * slv_sigdet_timer_val1, slv_sigdet_timer_val2 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x16A4]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x14.
+	 * Write 24-bit value 0x0 to register. Setting eee_3level_delay,
+	 * eee_TrKf_freeze_delay bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x16A8]\n");
+
+	/* Get access to Channel b'01, Node b'1111, Register 0x34.
+	 * Write 24-bit value 0x91B06C to register. Setting
+	 * FastMseSearchThreshLong1000, FastMseSearchThreshShort1000,
+	 * FastMseSearchUpdGain1000 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x0FE8]\n");
+
+	/* Get access to Channel b'01, Node b'1111, Register 0x3E.
+	 * Write 24-bit value 0xC0A028 to register. Setting
+	 * FastMseKp2ThreshLong1000, FastMseKp2ThreshShort1000,
+	 * FastMseKp2UpdGain1000, FastMseKp2ExitEn1000 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x0FFC]\n");
+
+	/* Get access to Channel b'01, Node b'1111, Register 0x35.
+	 * Write 24-bit value 0x041600 to register. Setting
+	 * FastMseSearchPhShNum1000, FastMseSearchClksPerPh1000,
+	 * FastMsePhChangeDelay1000 bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x0FEA]\n");
+
+	/* Get access to Channel b'10, Node b'1101, Register 0x03.
+	 * Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
+	 */
+	err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
+	if (err < 0)
+		pr_warn("Failed to Set Register[0x1686]\n");
+}
+
 static int lan88xx_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
@@ -132,6 +287,25 @@ static void lan88xx_set_mdix(struct phy_device *phydev)
 	phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_0);
 }
 
+static int lan88xx_config_init(struct phy_device *phydev)
+{
+	int val;
+
+	genphy_config_init(phydev);
+	/*Zerodetect delay enable */
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS,
+			   PHY_ARDENNES_MMD_DEV_3_PHY_CFG);
+	val |= PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_;
+
+	phy_write_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG,
+		      val);
+
+	/* Config DSP registers */
+	lan88xx_config_TR_regs(phydev);
+
+	return 0;
+}
+
 static int lan88xx_config_aneg(struct phy_device *phydev)
 {
 	lan88xx_set_mdix(phydev);
@@ -151,7 +325,7 @@ static struct phy_driver microchip_phy_driver[] = {
 	.probe		= lan88xx_probe,
 	.remove		= lan88xx_remove,
 
-	.config_init	= genphy_config_init,
+	.config_init	= lan88xx_config_init,
 	.config_aneg	= lan88xx_config_aneg,
 
 	.ack_interrupt	= lan88xx_phy_ack_interrupt,
@@ -160,6 +334,8 @@ static struct phy_driver microchip_phy_driver[] = {
 	.suspend	= lan88xx_suspend,
 	.resume		= genphy_resume,
 	.set_wol	= lan88xx_set_wol,
+	.read_page	= lan88xx_read_page,
+	.write_page	= lan88xx_write_page,
 } };
 
 module_phy_driver(microchip_phy_driver);
diff --git a/include/linux/microchipphy.h b/include/linux/microchipphy.h
index eb492d47f717..8f9c90379732 100644
--- a/include/linux/microchipphy.h
+++ b/include/linux/microchipphy.h
@@ -70,4 +70,12 @@
 #define	LAN88XX_MMD3_CHIP_ID			(32877)
 #define	LAN88XX_MMD3_CHIP_REV			(32878)
 
+/* DSP registers */
+#define PHY_ARDENNES_MMD_DEV_3_PHY_CFG		(0x806A)
+#define PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_	(0x2000)
+#define LAN88XX_EXT_PAGE_ACCESS_TR		(0x52B5)
+#define LAN88XX_EXT_PAGE_TR_CR			16
+#define LAN88XX_EXT_PAGE_TR_LOW_DATA		17
+#define LAN88XX_EXT_PAGE_TR_HIGH_DATA		18
+
 #endif /* _MICROCHIPPHY_H */
-- 
2.17.0

From 7d76fccb22d71c80209eb9ef5b013a630424cb6c Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Wed, 4 Apr 2018 00:19:35 +0200
Subject: [PATCH 2/9] lan78xx: Connect phy early

When using wicked with a lan78xx device attached to the system, we
end up with ethtool commands issued on the device before an ifup
got issued. That lead to the following crash:

    Unable to handle kernel NULL pointer dereference at virtual address 0000039c
    pgd = ffff800035b30000
    [0000039c] *pgd=0000000000000000
    Internal error: Oops: 96000004 [#1] SMP
    Modules linked in: [...]
    Supported: Yes
    CPU: 3 PID: 638 Comm: wickedd Tainted: G            E      4.12.14-0-default #1
    Hardware name: raspberrypi rpi/rpi, BIOS 2018.03-rc2 02/21/2018
    task: ffff800035e74180 task.stack: ffff800036718000
    PC is at phy_ethtool_ksettings_get+0x20/0x98
    LR is at lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
    pc : [<ffff0000086f7f30>] lr : [<ffff000000dcca84>] pstate: 20000005
    sp : ffff80003671bb20
    x29: ffff80003671bb20 x28: ffff800035e74180
    x27: ffff000008912000 x26: 000000000000001d
    x25: 0000000000000124 x24: ffff000008f74d00
    x23: 0000004000114809 x22: 0000000000000000
    x21: ffff80003671bbd0 x20: 0000000000000000
    x19: ffff80003671bbd0 x18: 000000000000040d
    x17: 0000000000000001 x16: 0000000000000000
    x15: 0000000000000000 x14: ffffffffffffffff
    x13: 0000000000000000 x12: 0000000000000020
    x11: 0101010101010101 x10: fefefefefefefeff
    x9 : 7f7f7f7f7f7f7f7f x8 : fefefeff31677364
    x7 : 0000000080808080 x6 : ffff80003671bc9c
    x5 : ffff80003671b9f8 x4 : ffff80002c296190
    x3 : 0000000000000000 x2 : 0000000000000000
    x1 : ffff80003671bbd0 x0 : ffff80003671bc00
    Process wickedd (pid: 638, stack limit = 0xffff800036718000)
    Call trace:
    Exception stack(0xffff80003671b9e0 to 0xffff80003671bb20)
    b9e0: ffff80003671bc00 ffff80003671bbd0 0000000000000000 0000000000000000
    ba00: ffff80002c296190 ffff80003671b9f8 ffff80003671bc9c 0000000080808080
    ba20: fefefeff31677364 7f7f7f7f7f7f7f7f fefefefefefefeff 0101010101010101
    ba40: 0000000000000020 0000000000000000 ffffffffffffffff 0000000000000000
    ba60: 0000000000000000 0000000000000001 000000000000040d ffff80003671bbd0
    ba80: 0000000000000000 ffff80003671bbd0 0000000000000000 0000004000114809
    baa0: ffff000008f74d00 0000000000000124 000000000000001d ffff000008912000
    bac0: ffff800035e74180 ffff80003671bb20 ffff000000dcca84 ffff80003671bb20
    bae0: ffff0000086f7f30 0000000020000005 ffff80002c296000 ffff800035223900
    bb00: 0000ffffffffffff 0000000000000000 ffff80003671bb20 ffff0000086f7f30
    [<ffff0000086f7f30>] phy_ethtool_ksettings_get+0x20/0x98
    [<ffff000000dcca84>] lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
    [<ffff0000087cbc40>] ethtool_get_settings+0x68/0x210
    [<ffff0000087cc0d4>] dev_ethtool+0x214/0x2180
    [<ffff0000087e5008>] dev_ioctl+0x400/0x630
    [<ffff00000879dd00>] sock_do_ioctl+0x70/0x88
    [<ffff00000879f5f8>] sock_ioctl+0x208/0x368
    [<ffff0000082cde10>] do_vfs_ioctl+0xb0/0x848
    [<ffff0000082ce634>] SyS_ioctl+0x8c/0xa8
    Exception stack(0xffff80003671bec0 to 0xffff80003671c000)
    bec0: 0000000000000009 0000000000008946 0000fffff4e841d0 0000aa0032687465
    bee0: 0000aaaafa2319d4 0000fffff4e841d4 0000000032687465 0000000032687465
    bf00: 000000000000001d 7f7fff7f7f7f7f7f 72606b622e71ff4c 7f7f7f7f7f7f7f7f
    bf20: 0101010101010101 0000000000000020 ffffffffffffffff 0000ffff7f510c68
    bf40: 0000ffff7f6a9d18 0000ffff7f44ce30 000000000000040d 0000ffff7f6f98f0
    bf60: 0000fffff4e842c0 0000000000000001 0000aaaafa2c2e00 0000ffff7f6ab000
    bf80: 0000fffff4e842c0 0000ffff7f62a000 0000aaaafa2b9f20 0000aaaafa2c2e00
    bfa0: 0000fffff4e84818 0000fffff4e841a0 0000ffff7f5ad0cc 0000fffff4e841a0
    bfc0: 0000ffff7f44ce3c 0000000080000000 0000000000000009 000000000000001d
    bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000

The culprit is quite simple: The driver tries to access the phy left and right,
but only actually has a working reference to it when the device is up.

The fix thus is quite simple too: Get a reference to the phy on probe already
and keep it even when the device is going down.

With this patch applied, I can successfully run wicked on my system and bring
the interface up and down as many times as I want, without getting NULL pointer
dereferences in between.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/lan78xx.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 32cf21716f19..145bb7cbf5b2 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2083,10 +2083,6 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 
 	dev->fc_autoneg = phydev->autoneg;
 
-	phy_start(phydev);
-
-	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
-
 	return 0;
 
 error:
@@ -2523,9 +2519,9 @@ static int lan78xx_open(struct net_device *net)
 	if (ret < 0)
 		goto done;
 
-	ret = lan78xx_phy_init(dev);
-	if (ret < 0)
-		goto done;
+	phy_start(net->phydev);
+
+	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
 
 	/* for Link Check */
 	if (dev->urb_intr) {
@@ -2586,13 +2582,8 @@ static int lan78xx_stop(struct net_device *net)
 	if (timer_pending(&dev->stat_monitor))
 		del_timer_sync(&dev->stat_monitor);
 
-	phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
-	phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
-
-	phy_stop(net->phydev);
-	phy_disconnect(net->phydev);
-
-	net->phydev = NULL;
+	if (net->phydev)
+		phy_stop(net->phydev);
 
 	clear_bit(EVENT_DEV_OPEN, &dev->flags);
 	netif_stop_queue(net);
@@ -3507,8 +3498,13 @@ static void lan78xx_disconnect(struct usb_interface *intf)
 		return;
 
 	udev = interface_to_usbdev(intf);
-
 	net = dev->net;
+
+	phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
+	phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
+
+	phy_disconnect(net->phydev);
+
 	unregister_netdev(net);
 
 	cancel_delayed_work_sync(&dev->wq);
@@ -3664,8 +3660,14 @@ static int lan78xx_probe(struct usb_interface *intf,
 	pm_runtime_set_autosuspend_delay(&udev->dev,
 					 DEFAULT_AUTOSUSPEND_DELAY);
 
+	ret = lan78xx_phy_init(dev);
+	if (ret < 0)
+		goto out4;
+
 	return 0;
 
+out4:
+	unregister_netdev(netdev);
 out3:
 	lan78xx_unbind(dev, intf);
 out2:
@@ -4013,7 +4015,7 @@ static int lan78xx_reset_resume(struct usb_interface *intf)
 
 	lan78xx_reset(dev);
 
-	lan78xx_phy_init(dev);
+	phy_start(dev->net->phydev);
 
 	return lan78xx_resume(intf);
 }
-- 
2.17.0

From 502356f8db439d77a41958041feec187c42f72bb Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Wed, 11 Apr 2018 12:02:47 +0100
Subject: [PATCH 3/9] lan78xx: Avoid spurious kevent 4 "error"

lan78xx_defer_event generates an error message whenever the work item
is already scheduled. lan78xx_open defers three events -
EVENT_STAT_UPDATE, EVENT_DEV_OPEN and EVENT_LINK_RESET. Being aware
of the likelihood (or certainty) of an error message, the DEV_OPEN
event is added to the set of pending events directly, relying on
the subsequent deferral of the EVENT_LINK_RESET call to schedule the
work.  Take the same precaution with EVENT_STAT_UPDATE to avoid a
totally unnecessary error message.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/lan78xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 145bb7cbf5b2..bdb696612e11 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2503,7 +2503,7 @@ static void lan78xx_init_stats(struct lan78xx_net *dev)
 	dev->stats.rollover_max.eee_tx_lpi_transitions = 0xFFFFFFFF;
 	dev->stats.rollover_max.eee_tx_lpi_time = 0xFFFFFFFF;
 
-	lan78xx_defer_kevent(dev, EVENT_STAT_UPDATE);
+	set_bit(EVENT_STAT_UPDATE, &dev->flags);
 }
 
 static int lan78xx_open(struct net_device *net)
-- 
2.17.0

From d9332c56373a8c43bc4761267ba3a246082e2270 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Tue, 10 Apr 2018 13:18:25 +0100
Subject: [PATCH 4/9] lan78xx: Don't reset the interface on open

Commit 92571a1aae40 ("lan78xx: Connect phy early") moves the PHY
initialisation into lan78xx_probe, but lan78xx_open subsequently calls
lan78xx_reset. As well as forcing a second round of link negotiation,
this reset frequently prevents the phy interrupt from being generated
(even though the link is up), rendering the interface unusable.

Fix this issue by removing the lan78xx_reset call from lan78xx_open.

Fixes: 92571a1aae40 ("lan78xx: Connect phy early")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/lan78xx.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index bdb696612e11..0867f7275852 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2515,10 +2515,6 @@ static int lan78xx_open(struct net_device *net)
 	if (ret < 0)
 		goto out;
 
-	ret = lan78xx_reset(dev);
-	if (ret < 0)
-		goto done;
-
 	phy_start(net->phydev);
 
 	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
-- 
2.17.0

From bce4fe9fa48df0cbbe842e80d9a520f7265b4cd4 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Wed, 4 Apr 2018 16:34:24 +0100
Subject: [PATCH 5/9] net: lan78xx: Allow for VLAN headers in timeout.

The frame abort timeout being set by lan78xx_set_rx_max_frame_length
didn't account for any VLAN headers, resulting in very low
throughput if used with tagged VLANs.
Use VLAN_ETH_HLEN instead of ETH_HLEN to correct for this.

See https://github.com/raspberrypi/linux/issues/2458

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
 drivers/net/usb/lan78xx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 0867f7275852..5b46998a6dce 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2178,7 +2178,7 @@ static int lan78xx_change_mtu(struct net_device *netdev, int new_mtu)
 	if ((ll_mtu % dev->maxpacket) == 0)
 		return -EDOM;
 
-	ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
+	ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + VLAN_ETH_HLEN);
 
 	netdev->mtu = new_mtu;
 
@@ -2467,7 +2467,8 @@ static int lan78xx_reset(struct lan78xx_net *dev)
 	buf |= FCT_TX_CTL_EN_;
 	ret = lan78xx_write_reg(dev, FCT_TX_CTL, buf);
 
-	ret = lan78xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
+	ret = lan78xx_set_rx_max_frame_length(dev,
+					      dev->net->mtu + VLAN_ETH_HLEN);
 
 	ret = lan78xx_read_reg(dev, MAC_RX, &buf);
 	buf |= MAC_RX_RXEN_;
-- 
2.17.0

From 6fecd97fd35e9c624d101495ca34c83b1cb23e3d Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Mon, 9 Apr 2018 14:31:54 +0100
Subject: [PATCH 6/9] net: lan78xx: Request s/w csum check on VLAN tagged
 packets.

There appears to be some issue in the LAN78xx where the checksum
computed on a VLAN tagged packet is incorrect, or at least not
in the form that the kernel is after. This is most easily shown
by pinging a device via a VLAN tagged interface and it will dump
out the error message and stack trace from netdev_rx_csum_fault.
It has also been seen with standard TCP and UDP packets.

Until this is fully understood, request that the network stack
computes the checksum on packets signalled as having a VLAN tag
applied.

See https://github.com/raspberrypi/linux/issues/2458

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
 drivers/net/usb/lan78xx.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 5b46998a6dce..6b61bb21f2ae 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2920,8 +2920,12 @@ static void lan78xx_rx_csum_offload(struct lan78xx_net *dev,
 				    struct sk_buff *skb,
 				    u32 rx_cmd_a, u32 rx_cmd_b)
 {
+	/* Checksum offload appears to be flawed if used with VLANs.
+	 * Elect for sw checksum check instead.
+	 */
 	if (!(dev->net->features & NETIF_F_RXCSUM) ||
-	    unlikely(rx_cmd_a & RX_CMD_A_ICSM_)) {
+	    unlikely(rx_cmd_a & RX_CMD_A_ICSM_) ||
+	    (rx_cmd_a & RX_CMD_A_FVTG_)) {
 		skb->ip_summed = CHECKSUM_NONE;
 	} else {
 		skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT_));
-- 
2.17.0

From 7528d39c5d01383fadb17a84b9840f9f685d1e0b Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Thu, 19 Apr 2018 17:59:38 +0100
Subject: [PATCH 7/9] lan78xx: Read MAC address from DT if present

There is a standard mechanism for locating and using a MAC address from
the Device Tree. Use this facility in the lan78xx driver to support
applications without programmed EEPROM or OTP. At the same time,
regularise the handling of the different address sources.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
 drivers/net/usb/lan78xx.c | 42 +++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 22 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 6b61bb21f2ae..6c38a74bb32d 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -37,6 +37,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/microchipphy.h>
 #include <linux/phy.h>
+#include <linux/of_net.h>
 #include "lan78xx.h"
 
 #define DRIVER_AUTHOR	"WOOJUNG HUH <woojung.huh@microchip.com>"
@@ -1652,34 +1653,31 @@ static void lan78xx_init_mac_address(struct lan78xx_net *dev)
 	addr[5] = (addr_hi >> 8) & 0xFF;
 
 	if (!is_valid_ether_addr(addr)) {
-		/* reading mac address from EEPROM or OTP */
-		if ((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
-					 addr) == 0) ||
-		    (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
-				      addr) == 0)) {
-			if (is_valid_ether_addr(addr)) {
-				/* eeprom values are valid so use them */
-				netif_dbg(dev, ifup, dev->net,
-					  "MAC address read from EEPROM");
-			} else {
-				/* generate random MAC */
-				random_ether_addr(addr);
-				netif_dbg(dev, ifup, dev->net,
-					  "MAC address set to random addr");
-			}
-
-			addr_lo = addr[0] | (addr[1] << 8) |
-				  (addr[2] << 16) | (addr[3] << 24);
-			addr_hi = addr[4] | (addr[5] << 8);
-
-			ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
-			ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
+		if (!eth_platform_get_mac_address(&dev->udev->dev, addr)) {
+			/* valid address present in Device Tree */
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from Device Tree");
+		} else if (((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET,
+						 ETH_ALEN, addr) == 0) ||
+			    (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET,
+					      ETH_ALEN, addr) == 0)) &&
+			   is_valid_ether_addr(addr)) {
+			/* eeprom values are valid so use them */
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from EEPROM");
 		} else {
 			/* generate random MAC */
 			random_ether_addr(addr);
 			netif_dbg(dev, ifup, dev->net,
 				  "MAC address set to random addr");
 		}
+
+		addr_lo = addr[0] | (addr[1] << 8) |
+			  (addr[2] << 16) | (addr[3] << 24);
+		addr_hi = addr[4] | (addr[5] << 8);
+
+		ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
+		ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
 	}
 
 	ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
-- 
2.17.0

From f8f9ad43b37f5db5895619e4304aa9ba286cbbb0 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Thu, 19 Apr 2018 17:59:40 +0100
Subject: [PATCH 8/9] dt-bindings: Document the DT bindings for lan78xx

The Microchip LAN78XX family of devices are Ethernet controllers with
a USB interface. Despite being discoverable devices it can be useful to
be able to configure them from Device Tree, particularly in low-cost
applications without an EEPROM or programmed OTP.

Document the supported properties in a bindings file.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 .../bindings/net/microchip,lan78xx.txt        | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/microchip,lan78xx.txt

diff --git a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
new file mode 100644
index 000000000000..76786a0f6d3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
@@ -0,0 +1,54 @@
+Microchip LAN78xx Gigabit Ethernet controller
+
+The LAN78XX devices are usually configured by programming their OTP or with
+an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
+The Device Tree properties, if present, override the OTP and EEPROM.
+
+Required properties:
+- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
+
+Optional properties:
+- local-mac-address:   see ethernet.txt
+- mac-address:         see ethernet.txt
+
+Optional properties of the embedded PHY:
+- microchip,led-modes: a 0..4 element vector, with each element configuring
+  the operating mode of an LED. Omitted LEDs are turned off. Allowed values
+  are defined in "include/dt-bindings/net/microchip-lan78xx.h".
+
+Example:
+
+/* Based on the configuration for a Raspberry Pi 3 B+ */
+&usb {
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb-port@1 {
+			compatible = "usb424,2514";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet: ethernet@1 {
+				compatible = "usb424,7800";
+				reg = <1>;
+				local-mac-address = [ 00 11 22 33 44 55 ];
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
+			};
+		};
+	};
+};
-- 
2.17.0

From be24db04ec2949e9b03763366f100ae40836c61e Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Mon, 23 Apr 2018 14:31:26 +0100
Subject: [PATCH 9/9] lan78xx: Read LED states from Device Tree

Add support for DT property "microchip,led-modes", a vector of zero
to four cells (u32s) in the range 0-15, each of which sets the mode
for one of the LEDs. Some possible values are:

    0=link/activity          1=link1000/activity
    2=link100/activity       3=link10/activity
    4=link100/1000/activity  5=link10/1000/activity
    6=link10/100/activity    14=off    15=on

These values are given symbolic constants in a dt-bindings header.

Also use the presence of the DT property to indicate that the
LEDs should be enabled - necessary in the event that no valid OTP
or EEPROM is available.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 MAINTAINERS                                 |  1 +
 drivers/net/phy/microchip.c                 | 25 ++++++++++++++++
 drivers/net/usb/lan78xx.c                   | 32 ++++++++++++++++++++-
 include/dt-bindings/net/microchip-lan78xx.h | 21 ++++++++++++++
 include/linux/microchipphy.h                |  3 ++
 5 files changed, 81 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/net/microchip-lan78xx.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 6e950b8b4a41..c7d5f8c60a2c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14437,6 +14437,7 @@ M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/usb/lan78xx.*
+F:	include/dt-bindings/net/microchip-lan78xx.h
 
 USB MASS STORAGE DRIVER
 M:	Alan Stern <stern@rowland.harvard.edu>
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index a97ac8c12c4c..2d67937866a3 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -21,6 +21,8 @@
 #include <linux/phy.h>
 #include <linux/microchipphy.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/net/microchip-lan78xx.h>
 
 #define DRIVER_AUTHOR	"WOOJUNG HUH <woojung.huh@microchip.com>"
 #define DRIVER_DESC	"Microchip LAN88XX PHY driver"
@@ -225,6 +227,8 @@ static int lan88xx_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
 	struct lan88xx_priv *priv;
+	u32 led_modes[4];
+	int len;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -232,6 +236,27 @@ static int lan88xx_probe(struct phy_device *phydev)
 
 	priv->wolopts = 0;
 
+	len = of_property_read_variable_u32_array(dev->of_node,
+						  "microchip,led-modes",
+						  led_modes,
+						  0,
+						  ARRAY_SIZE(led_modes));
+	if (len >= 0) {
+		u32 reg = 0;
+		int i;
+
+		for (i = 0; i < len; i++) {
+			if (led_modes[i] > 15)
+				return -EINVAL;
+			reg |= led_modes[i] << (i * 4);
+		}
+		for (; i < ARRAY_SIZE(led_modes); i++)
+			reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
+		(void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
+	} else if (len == -EOVERFLOW) {
+		return -EINVAL;
+	}
+
 	/* these values can be used to identify internal PHY */
 	priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
 	priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 6c38a74bb32d..01b876daa600 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -37,6 +37,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/microchipphy.h>
 #include <linux/phy.h>
+#include <linux/of_mdio.h>
 #include <linux/of_net.h>
 #include "lan78xx.h"
 
@@ -1760,6 +1761,7 @@ static int lan78xx_mdiobus_write(struct mii_bus *bus, int phy_id, int idx,
 
 static int lan78xx_mdio_init(struct lan78xx_net *dev)
 {
+	struct device_node *node;
 	int ret;
 
 	dev->mdiobus = mdiobus_alloc();
@@ -1788,7 +1790,13 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev)
 		break;
 	}
 
-	ret = mdiobus_register(dev->mdiobus);
+	node = of_get_child_by_name(dev->udev->dev.of_node, "mdio");
+	if (node) {
+		ret = of_mdiobus_register(dev->mdiobus, node);
+		of_node_put(node);
+	} else {
+		ret = mdiobus_register(dev->mdiobus);
+	}
 	if (ret) {
 		netdev_err(dev->net, "can't register MDIO bus\n");
 		goto exit1;
@@ -2077,6 +2085,28 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 	mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control);
 	phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv);
 
+	if (phydev->mdio.dev.of_node) {
+		u32 reg;
+		int len;
+
+		len = of_property_count_elems_of_size(phydev->mdio.dev.of_node,
+						      "microchip,led-modes",
+						      sizeof(u32));
+		if (len >= 0) {
+			/* Ensure the appropriate LEDs are enabled */
+			lan78xx_read_reg(dev, HW_CFG, &reg);
+			reg &= ~(HW_CFG_LED0_EN_ |
+				 HW_CFG_LED1_EN_ |
+				 HW_CFG_LED2_EN_ |
+				 HW_CFG_LED3_EN_);
+			reg |= (len > 0) * HW_CFG_LED0_EN_ |
+				(len > 1) * HW_CFG_LED1_EN_ |
+				(len > 2) * HW_CFG_LED2_EN_ |
+				(len > 3) * HW_CFG_LED3_EN_;
+			lan78xx_write_reg(dev, HW_CFG, reg);
+		}
+	}
+
 	genphy_config_aneg(phydev);
 
 	dev->fc_autoneg = phydev->autoneg;
diff --git a/include/dt-bindings/net/microchip-lan78xx.h b/include/dt-bindings/net/microchip-lan78xx.h
new file mode 100644
index 000000000000..0742ff075307
--- /dev/null
+++ b/include/dt-bindings/net/microchip-lan78xx.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _DT_BINDINGS_MICROCHIP_LAN78XX_H
+#define _DT_BINDINGS_MICROCHIP_LAN78XX_H
+
+/* LED modes for LAN7800/LAN7850 embedded PHY */
+
+#define LAN78XX_LINK_ACTIVITY           0
+#define LAN78XX_LINK_1000_ACTIVITY      1
+#define LAN78XX_LINK_100_ACTIVITY       2
+#define LAN78XX_LINK_10_ACTIVITY        3
+#define LAN78XX_LINK_100_1000_ACTIVITY  4
+#define LAN78XX_LINK_10_1000_ACTIVITY   5
+#define LAN78XX_LINK_10_100_ACTIVITY    6
+#define LAN78XX_DUPLEX_COLLISION        8
+#define LAN78XX_COLLISION               9
+#define LAN78XX_ACTIVITY                10
+#define LAN78XX_AUTONEG_FAULT           12
+#define LAN78XX_FORCE_LED_OFF           14
+#define LAN78XX_FORCE_LED_ON            15
+
+#endif
diff --git a/include/linux/microchipphy.h b/include/linux/microchipphy.h
index 8f9c90379732..fd1fc8c248ef 100644
--- a/include/linux/microchipphy.h
+++ b/include/linux/microchipphy.h
@@ -78,4 +78,7 @@
 #define LAN88XX_EXT_PAGE_TR_LOW_DATA		17
 #define LAN88XX_EXT_PAGE_TR_HIGH_DATA		18
 
+/* Registers specific to the LAN7800/LAN7850 embedded phy */
+#define LAN78XX_PHY_LED_MODE_SELECT		(0x1D)
+
 #endif /* _MICROCHIPPHY_H */
-- 
2.17.0